[Q] Acidentally Wiped System, What can I do? - G Pad 8.3 Q&A, Help & Troubleshooting

I accidentally formatted the system partition so the tablet will not boot. I can't get back in to TWRP, I didn't have anything to flash in there anyway because CM would fail. What can I do?
Thank you.

You could try the LG mobile support tool

techrider6262 said:
You could try the LG mobile support tool
Click to expand...
Click to collapse
I think you have to pay to use it.

No its free just go the the website and download it.You can downloaded it from the link in this post.
http://forum.xda-developers.com/showthread.php?t=2543350

Can you write to it in ADB? How far does it come when it tries to boot? just LG bootloop? And what edition of TWRP did you use to flash?

CuraeL said:
Can you write to it in ADB? How far does it come when it tries to boot? just LG bootloop? And what edition of TWRP did you use to flash?
Click to expand...
Click to collapse
I realize why it didn't flash. Because I was using an older version of TWRP that wouldn't flash AOSP roms. Is there any way to boot to recovery from the device being off?
The method in the link doesn't seem to work anymore.

How far do you get in the boot? LG screen? When connect to PC do you get connect/disconnect sounds? Please answer the questions as I'm thinking about this. I can't find any key combos so we need to find out if we have a small window where we can talk to ADB.. Any connection sounds? How far do you get?
Are you familiar with ADB and Fastboot?

CuraeL said:
How far do you get in the boot? LG screen? When connect to PC do you get connect/disconnect sounds? Please answer the questions as I'm thinking about this. I can't find any key combos so we need to find out if we have a small window where we can talk to ADB.. Any connection sounds? How far do you get?
Are you familiar with ADB and Fastboot?
Click to expand...
Click to collapse
I don't hear any sounds. It just stays at the LG screen. I made it to the factory reset screen but it didn't do anything. I followed these steps:
Make sure your device is fully charged and turned off.
Simultaneously press and hold the power and volume down buttons.
When the LG logo shows up, release the power button only.
Now press and hold the power and volume up button while keeping your hold on the volume down button.
When the factory reset screen appears, release your hold on all buttons.
Press the power button to continue.
Press the power button again to confirm if you’re sure you wish to continue with the reset.
Click to expand...
Click to collapse
ADB doesn't work at the LG screen, I just get the error: device not found message.
I can just send it back but I'd prefer to get it working.
Thanks

skatingrocker17 said:
I don't hear any sounds. It just stays at the LG screen. I made it to the factory reset screen but it didn't do anything. I followed these steps:
ADB doesn't work at the LG screen, I just get the error: device not found message.
I can just send it back but I'd prefer to get it working.
Thanks
Click to expand...
Click to collapse
Okay, okay, I dunno what you can do maybe ADB Works in here: Turn off the device AND disconnect from PC. When shut Down, you DONT hold power, but hold Volume up + Volume Down, when you hold both, you plug in USB cable. This takes you to download mode. That is perhaps a step in the right direction if you can start ADB from download mode. Then you can boot into recovery. But I don't know. This is maybe the last option for you. No recovery key combo has been discovered yet. If you can do a fastboot boot recovery from download mode, that would be golden. Then you can use the SD Card to get back with the newest TWRP and the CM11 nightly. Please let me know if this Works man. I'm sorry for your loss, otherwise. Factory Reset, as you said, will not work, since there's nothing to "restore" from. You deleted it. :/

Unfortunately, ADB doesn't work in download mode.

skatingrocker17 said:
Unfortunately, ADB doesn't work in download mode.
Click to expand...
Click to collapse
Were you able to download the LG tool?

skatingrocker17 said:
Unfortunately, ADB doesn't work in download mode.
Click to expand...
Click to collapse
Damn that sucks. I was looking around the G2 forums to see about download mode and what LG usually did with it. Apparently they are using something called KDZ files, and they are able to flash stock roms back onto the device with something called FlashTool. Now, if it were my tablet and it was in the state yours is, I would try and read the tutorial. And then I'd follow it step by step but instead of the G2 KDZ, I'd see if I could find a KDZ with a G Pad rom instead. And just.. Yolo that ****.. From download mode.
Here's the thread, if you wanna read it.. http://forum.xda-developers.com/showthread.php?t=2432476. I dunno man. The LG Tool thing, maybe you should try and see what techrider6262 is saying, he might have an idea as well, otherwise, just go all out crazy and see if you can magically use the FlashTool on your G Pad instead of the G2, since they are from "same line up." I know that's not the same as same model and so on.. But still.. Download mode.. Is download mode. Ofc. the tool itself or the settings in the tool might not work.. But.. You know. Why not.. Can't hurt.. Download mode will prolly still be available afterwards.. "For science."

got the same problem. i couldnt i wiped all data on the tablet and couldnt select the rom from the ext.sd. now its stuck at the lg logo.

skatingrocker17 said:
Unfortunately, ADB doesn't work in download mode.
Click to expand...
Click to collapse
blazze11 said:
got the same problem. i couldnt i wiped all data on the tablet and couldnt select the rom from the ext.sd. now its stuck at the lg logo.
Click to expand...
Click to collapse
This guys.. Is for download mode fix. I am pretty sure this works. Since you have access to Dload mode. Good luck.
I use the download mode to install the original official rom.
1. Download the LG MOBILE SUPPORT TOOL by this link:http://www.lg.com/us/support-mobile/lg-V500-White
2. install the software in computer, Plug in USB cable with computer, Open the software LG MOBILE SUPPORT TOOL.
3. Turn off Pad and unplug.
4. press hold both volume up and volume down, Then plug in usb cable, And then pad is in downlaod mode
5. USB driver will be insatlled automatically
6. In LG MOBILE SUPPORT TOOL, click option---.country and language-OK, then click option--upgrade recovery
7. It will installe original official rom automatically.
8. After about 1.5 hours, The pad will be installed the last official room.
^ This is a quote and now I shut down the thread, sorry, don't know who said it, just got stoked when I saw it.

thanks, the tool is downloading the rom. hope its works.
// it worked thanks a lot, will try to flash cm 11 tomorrow again.

blazze11 said:
thanks, the tool is downloading the rom. hope its works.
// it worked thanks a lot, will try to flash cm 11 tomorrow again.
Click to expand...
Click to collapse
That is GREAT!
Now remember mate, clear DATA in TWPR, not system.. Never system. Clear only data/factory reset, then just flash CM 11. Nothing else is needed. Remember to install superSU from market after you get booted, otherwise root will not work. Update Binary in SuperSU.

Okay thanks for your help. Its so stupid that there is no key combination for recovery.
I will use your advice and try it later.

blazze11 said:
Okay thanks for your help. Its so stupid that there is no key combination for recovery.
I will use your advice and try it later.
Click to expand...
Click to collapse
Agreed.

blazze11 said:
Okay thanks for your help. Its so stupid that there is no key combination for recovery.
I will use your advice and try it later.
Click to expand...
Click to collapse
There is...
With device powered off do this...
Hold volume key down and press and hold power button.
When LG Logo appears let go of just the power key while still holding the volume key down and then press power key again and volume up while still holding down the volume key.
You get to the factory reset screen and just keep pressing power until you get into recovery.

AndroidUser00110001 said:
There is...
With device powered off do this...
Hold volume key down and press and hold power button.
When LG Logo appears let go of just the power key while still holding the volume key down and then press power key again and volume up while still holding down the volume key.
You get to the factory reset screen and just keep pressing power until you get into recovery.
Click to expand...
Click to collapse
Okay, i will try it next time. Everything is working right now.
Thanks

Related

Chainfire 3D

I stupidly installed chainfire 3D driver without looking into anything first and now my tablet is stuck in a loop.
The LG logo animation keeps repeating itself and never boots.
is there a way to disable the chainfire driver so it boots up without it.
I dont know what came over me but as soon as I pressed install I knew it was the wrong thing to do...
will I have to flash an official rom to it?
please help...stressin so much
nk33 said:
I stupidly installed chainfire 3D driver without looking into anything first and now my tablet is stuck in a loop.
The LG logo animation keeps repeating itself and never boots.
is there a way to disable the chainfire driver so it boots up without it.
I dont know what came over me but as soon as I pressed install I knew it was the wrong thing to do...
will I have to flash an official rom to it?
please help...stressin so much
Click to expand...
Click to collapse
If you can get to recovery through the key combo then you can recover from the backup that you of course have made. Otherwise, yes, the LG Repair tool is prolly your best bet. Sorry mate. Good luck.
CuraeL said:
If you can get to recovery through the key combo then you can recover from the backup that you of course have made. Otherwise, yes, the LG Repair tool is prolly your best bet. Sorry mate. Good luck.
Click to expand...
Click to collapse
1) I have no custom recovery
2) have you got a link for the repair tool with instructions
thanks for your help
...also what is the "key combo" to get into recovery? i wouldn't mind doing a factory reset
nk33 said:
...also what is the "key combo" to get into recovery? i wouldn't mind doing a factory reset
Click to expand...
Click to collapse
A bit tricky. Shut down the tablet.
Hold power + volume down
Release power when logo comes up, THEN quickly press power AND volume up while holding volume down through it all. Try a few times, eventually it will work. Without custom recovery you will be able to just press power and do a factory reset. Try that first.
Otherwise, go to lg.com and go to support, download LG Pc Suite and use the recovery tool. To get to download mode on your device turn it off and hold volume up + down and then insert the USB. It should then boot up into dload mode.
Good luck.
CuraeL said:
A bit tricky. Shut down the tablet.
Hold power + volume down
Release power when logo comes up, THEN quickly press power AND volume up while holding volume down through it all. Try a few times, eventually it will work. Without custom recovery you will be able to just press power and do a factory reset. Try that first.
Otherwise, go to lg.com and go to support, download LG Pc Suite and use the recovery tool. To get to download mode on your device turn it off and hold volume up + down and then insert the USB. It should then boot up into dload mode.
Good luck.
Click to expand...
Click to collapse
thanks mate. managed to use google and find that out while I was waiting for your response. Used the LG tool method - lucky I have fibre it downloaded the ROM in a few minutes.
managed to find a titanium backup I copied and pasted to my pc on one of the drives - rerooted it and restoring from titanium now.
thanks for all your help mate.
...I knew there was a way!!

[Q] How to enter recovery mode using key combination?

I can use "adb reboot recovery" to enter TWRP 2.7 recovery mode, but I want to use key combination, please tell me how to that.
Hold Power + Vol Down > Wait until LG Logo pops up and release from both buttons > quickly hold Power + Vol Up + Vol Down again
It will pop up with some message about reset to factory settings, but it's all a bluff.
Hit Power x3 times to confirm and you'll get to TWRP recovery
Thanks, it works.
actually I enter this factory reset mode before, but i just don't know it a "fake".
so will this erase all data or not?
Jasiekor said:
so will this erase all data or not?
Click to expand...
Click to collapse
That will depend on whether you've installed TWRP or not.
If you've still got the original recovery it will wipe it like it says it will, if you've got a custom recovery it will take you to it.
The standard recovery isn't a recovery like you're expecting it to be, if just has a way of resetting things to default without allowing you to do anything extra. OEM don't like giving people options but want a way to reset to defaults that the customer can use before needing to return a faulty unit which might not be faulty. If that makes sense.
Pman said:
Hold Power + Vol Down > Wait until LG Logo pops up and release from both buttons > quickly hold Power + Vol Up + Vol Down again
It will pop up with some message about reset to factory settings, but it's all a bluff.
Hit Power x3 times to confirm and you'll get to TWRP recovery
Click to expand...
Click to collapse
Thought I'd lost recovery after flashing the lp rom. Sorry for the bump! Many thanks and lol at the 'bluff' factory reset!
Fullmetal Jun said:
Thought I'd lost recovery after flashing the lp rom. Sorry for the bump! Many thanks and lol at the 'bluff' factory reset!
Click to expand...
Click to collapse
No problems, happy to help
Fullmetal Jun said:
Thought I'd lost recovery after flashing the lp rom. Sorry for the bump! Many thanks and lol at the 'bluff' factory reset!
Click to expand...
Click to collapse
From what I can tell, it's not a "bluff". It seems that the stock recovery partition would just automatically do a factory reset, so it warns you before booting the recovery partition. Seeing as you're non-stock, it just boots into TWRP/CWM. It's a valid warning that's simply set up in a weird way.
i hard rest my lg stylo but when i did it erased all my key comob how did i get them back
crystalgirl20977 said:
i hard rest my lg stylo but when i did it erased all my key comob how did i get them back
Click to expand...
Click to collapse
You don't.
We'll you might be able to but you're going about it the wrong way.
First you need to find the right forum for your device, then you read, followed by more reading.
At some point you've hopefully discovered that you should have done all this reading before you reset your device.
Also before pressing the post button on your next post, read it first to make sure it makes sense.
Thank you very much, I tried other combinations found on some web pages that failed. This one worked!
Issue remains.
Pman said:
Hold Power + Vol Down > Wait until LG Logo pops up and release from both buttons > quickly hold Power + Vol Up + Vol Down again
It will pop up with some message about reset to factory settings, but it's all a bluff.
Hit Power x3 times to confirm and you'll get to TWRP recovery
Click to expand...
Click to collapse
I got myself in a pretty bad situation. I have the stock rom. I am trying to get that back using recovery but it's not working. Only factory reset screen. This tablet stopped working in 2015. It cannot write ANY data ANYWHERE. Can't take pics, Can't take screenshots, Can't download apps. Nothing. I really want my tablet back... :/
CharaGloom said:
I got myself in a pretty bad situation. I have the stock rom. I am trying to get that back using recovery but it's not working. Only factory reset screen. This tablet stopped working in 2015. It cannot write ANY data ANYWHERE. Can't take pics, Can't take screenshots, Can't download apps. Nothing. I really want my tablet back... :/
Click to expand...
Click to collapse
I'm probably not the best person to help, however if you put a new post up with more details on what you have access too, the community will be able to help out.
CharaGloom said:
I got myself in a pretty bad situation. I have the stock rom. I am trying to get that back using recovery but it's not working. Only factory reset screen. This tablet stopped working in 2015. It cannot write ANY data ANYWHERE. Can't take pics, Can't take screenshots, Can't download apps. Nothing. I really want my tablet back... :/
Click to expand...
Click to collapse
Install LG software on your computer first. Then with the tablet completely off, hold VolUp and plug the tablet into the computer. That will enter LG download mode. Use the LG software on your PC to install the latest firmware available for your device. From there you can use the guides on this forum to go custom if you so desire.

[Q] Lg g3 vs985 not going into recovery while device is powered off

Please help lg g 3 won't enter custom recovery I've tried all button variations
Please someone help I have a rooted g3 and don't wanna brick it?????
Go into an adb terminal and type in
Code:
adb reboot recovery[/quote]. If you don't have adb, search up minimal adb and fastboot, and how to use it.
Sent from my SM-N9100 using Tapatalk
On computer or phone?
Sent from my VS985 4G using XDA Free mobile app
And my phone already has twrp, just can't access it from device being off, but twrp app lets me go to recovery, just not when phone is off. So this should fix that right?
Sent from my VS985 4G using XDA Free mobile app
Please someone help
I've seen people are viewing this post if anyone know how to fix my problem please help or message me, the minimal adb won't work unless the device is turned on in usb. debugging, I can access my recovery with phone on easily but while it's powered off I should be able to get to custom recovery by pressing volume down and power while phone is off, but this method isn't working. So if I get in bootloop I can't get into custom recovery...please anyone any ideas
Well it should be as simple as holding down power and volume button down things but i guess you've already tried that method many times and it didnt work so you ask then, right?
If your phone in bootloop, you can flash tot files and it will back to stock re-root and re-install trwp.
If your phone still (or already) normal, you can download an app that can take you to custom recovery such as rebooter or power menu, thats it.
Yea phone isn't in bootloop, but if I put a Rom on phone I have no way to access the recovery because the volume and power won't take me to the recovery, so if it goes into bootloop I'm outta of luck I don't understand why the hardware buttons won't take me to the recovery, have you ever heard of this problem
brozillatyler said:
I've seen people are viewing this post if anyone know how to fix my problem please help or message me, the minimal adb won't work unless the device is turned on in usb. debugging, I can access my recovery with phone on easily but while it's powered off I should be able to get to custom recovery by pressing volume down and power while phone is off, but this method isn't working. So if I get in bootloop I can't get into custom recovery...please anyone any ideas
Click to expand...
Click to collapse
How long are you holding the vol down and power buttons? It should be around 15-20 seconds, then your system recovery screen comes up, you choose factory data reset, yes, and then TWRP comes up. If that isn't working - are you sure your buttons are working OK?
If the phone is turned off is there any other way to access it while phone is off?
Yes buttons work fine I hold it down and it just goes to Verizon screen ?
Actually when I hold it down it just stays on logo and reboots back to logo over and over and over
Actually I hold it down and it reboots to logo over and over its like there's no recovery there I don't understand lol
If anyone has any ideas or thoughts on how to fix this please let me know
brozillatyler said:
If anyone has any ideas or thoughts on how to fix this please let me know
Click to expand...
Click to collapse
OK... Does your phone boot into your ROM at all or are you bootlooped? If your phone boots, download an app called flashify and get the proper twrp .img file for your model and flash the image using flashify. It's an easy app to use - just make sure you're using the correct twrp .img for your phone...from here: http://forum.xda-developers.com/lg-g3/orig-development/recovery-twrp-touch-recovery-2-8-2-0-t2966129
If you are bootlooped I would suggest starting over and reflashing back to stock using the tot or kdz method. Here is a guide: http://forum.xda-developers.com/verizon-lg-g3/general/restore-verizon-to-stock-t2827878 I know it can be a pain to get the download tool working properly sometimes, so it may take some effort to get it working, but be patient (and read a lot if you get stuck) and you will get it working.
I don't know how you got borked...maybe it was an un-bumped twrp image? Either way, it is what it is, just try not to do it again Good luck.
Thanks much I'll try this
When this happened to me i would
1: remove battery
2: insert battery
3: hold volume down and lock button at the same time
4: When the LG Logo pops up release the lock button for 1 second (while still holding the volume down button), then press down again
5: A data reset/restore menu appears, and when you choose to reset/restore, TWRP boots to recovery.
jared1992 said:
When this happened to me i would
1: remove battery
2: insert battery
3: hold volume down and lock button at the same time
4: When the LG Logo pops up release the lock button for 1 second (while still holding the volume down button), then press down again
5: A data reset/restore menu appears, and when you choose to reset/restore, TWRP boots to recovery.
Click to expand...
Click to collapse
I tried this also not working how did you fix it?
brozillatyler said:
I tried this also not working how did you fix it?
Click to expand...
Click to collapse
Hmm. That worked for me. I'm not sure what next.

H815 Soft bricked(?) adb shows device offline

Soo.... I messed up and edited the build.prop specificly the ro.build.type property. I tried to enable some debug options without validating if this would be a good idea (hint: it's not).
It seems that this has bricked my phone, the first LG splash screen shows up with the powered by android, and the second animation just keeps loading forever (making the phone very hot). And the LED flashes blue continously.
I did manage to get the device visible in ADB but it tells me that the device is offline so I can't do anything with it.
Tried booting in recovery mode (holding power button + volume down) but it just own't go into recovery mode.
Some extra info of what runs on my phone:
- version H815
- Android 6.0
- bootloader unlocked
- TWRP installed
- Rooted
- XPosed installed
Any idea on what I could try to fix it? (I guess stuck with a brick but oh well).
Thanks!
What do you mean, by it can't go into recovery mode?
Nothing is showing on screen?
Go to downlod mode either use lgup or lg flashtool to reflash the firmware that you are on... Do u remember which firmware you were on ?
Thanks for the replies!
Vortuks said:
What do you mean, by it can't go into recovery mode?
Nothing is showing on screen?
Click to expand...
Click to collapse
I meant that it just boots 'normally' when I press those buttons, it shows me the first LG logo and the second animation just hangs, whatever I do. I tried all sorts of combinations with the power button + volume down. (Keeping it pressed, briefly letting it go after the lg logo and repressing them).
jinderation said:
Go to downlod mode either use lgup or lg flashtool to reflash the firmware that you are on... Do u remember which firmware you were on ?
Click to expand...
Click to collapse
I don't know exactly which firmware I was on but I can't even get my phone into download mode (same as my other response, pressing volume up doesn't do anything).
The recovery and download mode used to work but I have no idea why it doesn't now...
When booting the phone, hold the power button and volume down button simultaneously, when LG logo appear, push the power button again. You should see the white screen, where you choose "YES" twice. Then the phone should kick you into TWRP or different recovery mode.
But how the hell editing build.prop can mess with recovery and download mode? Sounds incredible
Vortuks said:
But how the hell editing build.prop can mess with recovery and download mode? Sounds incredible
Click to expand...
Click to collapse
Maybe he has bootloop issue... ILAPO
Yeah I have no idea why the buttons aren't working for me. After a lot of searching I found this thread:
http://forum.xda-developers.com/g4/help/soft-bricked-device-t3248144
Which is basicly the same thing I'm experiencing, ADB comes online for just a brief second (kept spamming the reboot recovery command) and got in TWRP and I just flashed another which worked fine.
Odd thing is, even now my phone works I can't start recovery or download with the hardware buttons...... oh well, thankfully adb works as it's supposed to.
Thank you all for your help!

v500 Stuck Bootlooping - Cant Access TWRP

Hi all,
Have a brand new (to me) v500 that i bought and was able to root, flash twrp, and flash crdroid on yesterday. Today i flashed standard AOSP but now i'm stuck in a bootloop and cant figure out how to access twrp any more. Previously with crdroid on it i was accessing the bootloader/twrp via an app. So far all i can get to come up using hardware buttons is the download mode, and ADB isn't recognizing the device.
Any advice? I tried following a guide to revert to stock using the LG Support Tool but cant find the R&D tools to complete the tutorial.
Any help is appreciated.
Bump - $10 USD to whoever can help me solve this first
To enter twrp via buttons on v500:
Press and hold Power Button + Volume Down
When the LG logo shows up, release the power button only
Now press and hold the Power and Volume Up button while keeping your hold on the Volume Down button
When the factory reset screen appears, release your hold on all buttons
Follow On Screen Indications to make factory reset, but instead you enter twrp
Sent from my Pixel 3a using Tapatalk
---------- Post added at 12:58 PM ---------- Previous post was at 12:55 PM ----------
RUGGNATION said:
Hi all,
Have a brand new (to me) v500 that i bought and was able to root, flash twrp, and flash crdroid on yesterday. Today i flashed standard AOSP but now i'm stuck in a bootloop and cant figure out how to access twrp any more. Previously with crdroid on it i was accessing the bootloader/twrp via an app. So far all i can get to come up using hardware buttons is the download mode, and ADB isn't recognizing the device.
Any advice? I tried following a guide to revert to stock using the LG Support Tool but cant find the R&D tools to complete the tutorial.
Any help is appreciated.
Click to expand...
Click to collapse
To enter twrp via buttons on v500:
Press and hold Power Button + Volume Down
When the LG logo shows up, release the power button only
Now press and hold the Power and Volume Up button while keeping your hold on the Volume Down button
When the factory reset screen appears, release your hold on all buttons
Follow On Screen Indications to make factory reset, but instead you enter twrp
Sent from my Pixel 3a using Tapatalk
RUGGNATION said:
Hi all,
(---cut---) So far all i can get to come up using hardware buttons is the download mode, and ADB isn't recognizing the device.
Any advice? I tried following a guide to revert to stock using the LG Support Tool but cant find the R&D tools to complete the tutorial.
Any help is appreciated.
Click to expand...
Click to collapse
Have you tried LG Flash Tool 2014?
b0li said:
To enter twrp via buttons on v500:
Press and hold Power Button + Volume Down
When the LG logo shows up, release the power button only
Now press and hold the Power and Volume Up button while keeping your hold on the Volume Down button
When the factory reset screen appears, release your hold on all buttons
Follow On Screen Indications to make factory reset, but instead you enter twrp
Click to expand...
Click to collapse
Using that combination of buttons doesnt bring up any menus, i see the LG logo and then either holding the power button shuts down the tablet or it tries booting into Android, which then loops.
ze7zez said:
Have you tried LG Flash Tool 2014?
Click to expand...
Click to collapse
I did but ive been unable to get it to work and/or find the right file to load into it.
RUGGNATION said:
I did but ive been unable to get it to work and/or find the right file to load into it.
Click to expand...
Click to collapse
V50020f_00.kdz
Download LG Official Stock ROM / Firmware [U.S.]
or
Enter the serial number XXXXXXXXXXXXX into the link
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=LGXXXXXXXXXXXXX
and you will receive a link to the ROM.
ze7zez said:
V50020f_00.kdz
Download LG Official Stock ROM / Firmware [U.S.]
Click to expand...
Click to collapse
Thanks for the link, so far i havent been able to get my computer to recognize the usb connection when in download mode. I'm using the OEM cable and downloaded the drivers in the LG Flash Tool thread, but no luck.
RUGGNATION said:
Using that combination of buttons doesnt bring up any menus, i see the LG logo and then either holding the power button shuts down the tablet or it tries booting into Android, which then loops.
Click to expand...
Click to collapse
b0li gave an invalid TWRP entry instruction.
Read How to enter recovery mode using key combination post #2.
In TWRP, do advanced wipe without internal storage.
Before you flash the ROM, check its checksum carefully to see if it is identical to the one on the server.
ze7zez said:
b0li gave an invalid TWRP entry instruction.
Read How to enter recovery mode using key combination post #2.
Click to expand...
Click to collapse
I tried the corrected key combination, but no menus pop up, I either hold the power and vol up/down buttons until the device turns itself off, or it boots to the Android logo and then loops.
RUGGNATION said:
I tried the corrected key combination, but no menus pop up, I either hold the power and vol up/down buttons until the device turns itself off, or it boots to the Android logo and then loops.
Click to expand...
Click to collapse
It turns off because you hold 3 keys and don't release them.
You must press them simultaneously and then release them immediately.
ze7zez said:
It turns off because you hold 3 keys and don't release them.
You must press them simultaneously and then release them immediately.
Click to expand...
Click to collapse
That did the trick, can't believe it was just because i wasn't pressing the keys exactly right. I was able to get back into TWRP and reflash the ROM so now everything is working. Still having trouble getting usb to recognize the device, so i can't flash anything else on there at the moment.
PM me your paypal or venmo
RUGGNATION said:
Still having trouble getting usb to recognize the device, so i can't flash anything else on there at the moment.
Click to expand...
Click to collapse
Perhaps the problem is not the usb socket or cable.
Blow out the socket with compressed air and try again.
If that doesn't work, then your OS may be a problem.
In this case, try [LIVE-ISO][FWUL]adb/fastboot without any installation and driver issues.
I tried another computer too, same result - the tablet recognizes the connection so it starts charging, and despite the USB settings in dev options being set for MTP, it doesn't connect.
I'll try your link later, but it seems like its a problem with the tablet compared to computer.
RUGGNATION said:
I tried the corrected key combination, but no menus pop up, I either hold the power and vol up/down buttons until the device turns itself off, or it boots to the Android logo and then loops.
Click to expand...
Click to collapse
You can always transfer data using microSD or via WiFi tethering.
If via WiFi, I recommend the SwiFTP server - simple and reliable.
I tried to update Lineage and am running into an issue now where as soon as the LG logo pops up, a message that says "Secure booting error! Cause: boot certification verify" pops up almost immediately so I can't use the hardware buttons to get into TWRP. Any ideas around this one? Thanks again all!

Categories

Resources