Lg g4c (h525n) - G4 Q&A, Help & Troubleshooting

Hey guys,
I have a LG G4c H525N which I tried to root. Unfortunately, when I try to start it up now it says:
Boot verification Failed
-cause MISMATCH_SIG_LEN
I read about flashing the KDZ using LG Flash Tool, which I tried doing. Phone enters download mode and all but my PC doesn't recognise the phone.
It doesn't show up in my computer so I can't take the KDZ file.. I tried it on multiple PC's and it doesn't seem to work anywhere. I am using the original cable. I think I have the most recent drivers too.
I hope someone has a solution.
Cheers.

MadMatey said:
Hey guys,
I have a LG G4c H525N which I tried to root. Unfortunately, when I try to start it up now it says:
Boot verification Failed
-cause MISMATCH_SIG_LEN
I read about flashing the KDZ using LG Flash Tool, which I tried doing. Phone enters download mode and all but my PC doesn't recognise the phone.
It doesn't show up in my computer so I can't take the KDZ file.. I tried it on multiple PC's and it doesn't seem to work anywhere. I am using the original cable. I think I have the most recent drivers too.
I hope someone has a solution.
Cheers.
Click to expand...
Click to collapse
Bump..

Just outa curiosity u got ure lg drivers and set to com 41
---------- Post added at 09:33 PM ---------- Previous post was at 09:31 PM ----------
And make sure none of the usb ports are 3.0s. If ure in download mode and set to 41 its more than likely a driver issue what versions of windows u tryin on

TheMadScientist420 said:
Just outa curiosity u got ure lg drivers and set to com 41
---------- Post added at 09:33 PM ---------- Previous post was at 09:31 PM ----------
And make sure none of the usb ports are 3.0s. If ure in download mode and set to 41 its more than likely a driver issue what versions of windows u tryin on
Click to expand...
Click to collapse
What do you mean by setting to com 41 ? And I'm using Windows 7 Ultimate 64-bit. Tried all USB ports on my PC, front and back, tried all on my laptop but none work. I also downloaded the latest driver from the LG website.

MadMatey said:
What do you mean by setting to com 41 ? And I'm using Windows 7 Ultimate 64-bit. Tried all USB ports on my PC, front and back, tried all on my laptop but none work. I also downloaded the latest driver from the LG website.
Click to expand...
Click to collapse
Look in device manager on windows. The under coms ands ports. Then open the options on that. Goto either port settings or advanced settings then port setting then advanced port settings and u can change the port number. U should be able to google com 41 and lg. Im not in front of my pc so i cant give perfect exacts.

TheMadScientist420 said:
Look in device manager on windows. The under coms ands ports. Then open the options on that. Goto either port settings or advanced settings then port setting then advanced port settings and u can change the port number. U should be able to google com 41 and lg. Im not in front of my pc so i cant give perfect exacts.
Click to expand...
Click to collapse
I found it! Changed it to COM41 but it still doesn't seem to work.. Thanks so far man, I appreciate your help. Do you have any other ideas?
Cheers.

MadMatey said:
I found it! Changed it to COM41 but it still doesn't seem to work.. Thanks so far man, I appreciate your help. Do you have any other ideas?
Cheers.
Click to expand...
Click to collapse
Does flashtool say waiting for device. If so unlplug and replug phone sometimes also needs a jump. Now also a lotta peoe use the new method. Instead of flashtool which i use. Im afraid of change lol. But i have used it try lgup
---------- Post added at 09:06 AM ---------- Previous post was at 09:04 AM ----------
Sometimes flashtool can be really picky

Flashtool asks me to locate the KDZ file of my phone, it doesnt look for a device itself..

MadMatey said:
Flashtool asks me to locate the KDZ file of my phone, it doesnt look for a device itself..
Click to expand...
Click to collapse
Now im not to famiar with kdzs i always use .tots to restore mine. But have u downloaded your kdz for your phone model and provider.
---------- Post added at 11:11 AM ---------- Previous post was at 11:09 AM ----------
For instance i have ls991zv6.tot i had to dl it in my carrier specific forum. Also whennu installed flashtool did u also download and place the megalock.dll
---------- Post added at 11:12 AM ---------- Previous post was at 11:11 AM ----------
Also sounds like ure not making it even to the point where youe even actually starting restore proscess

I havent made it any further because my pc doesnt find my phone. Im lost. Dont I have to take the KDZ file of my own phone, by entering download mode? Im kinda new to this all..

As far as i know there should be one for download
---------- Post added at 01:29 PM ---------- Previous post was at 01:21 PM ----------
If u r on mm you cant downgrade u have to flash what ever firmware u were on there is a anti rollback on mm. I cant find ure thread but google restoring your model kdz method. Should givebu the link to dl it. Kdzs and tots are a restore package that have been pulled from a phone u dont havento pull it from yours. Like i said im only familar with tot method which also uses flash tool. I guess from what i read lgup doesnt support ure model. Im trying to find ure kdz link but i need whatbfirmware unwas on orig just in case of antirollback. If u flash thebwrong one with anti rollback u could hardbrick.
---------- Post added at 01:31 PM ---------- Previous post was at 01:29 PM ----------
http://www.mylgphones.com/european-...tock-lg-h525n-kdz-available-for-download.html. this is a link for the 20v firmware

Ill try something with this, thanks man! Ill let you know!

Related

[Q] Problem installing Samsung MTP Windows 7 update

As the title suggests I cannot install the Samsung MTP Windows 7 update. I also get a message stating that the driver for the Nexus did not install correctly. Obviously, this means that I cannot see the phone as a device within My Computer and therefore I cannot transfer files on to the phone.
I only install Windows 7 about 6 weeks ago so I doubt the Windows install is corrupted.
Other than this slight issue I have to say that I LOVE this phone.
Any help much appreciated!
Error details below:
Windows error code 800F020B
Samsung Electronis Co., Ltd - Other hardware - SAMSUNG Mobile MTP Device
Status: Failed
This is a Android forum you are probably much better off looking for the forum which matches your phone to get the advice you need.
daleski75 said:
This is a Android forum you are probably much better off looking for the forum which matches your phone to get the advice you need.
Click to expand...
Click to collapse
I thought this was the right forum for this question as it is a Galaxy Nexus?!
Remove all the samsung USB driver's and regulair drivers you allready have installed.
than update your windows 7 to latest update.
reboot.
and try again.
let us know if that helped.
---------- Post added at 02:02 PM ---------- Previous post was at 02:01 PM ----------
daleski75 said:
This is a Android forum you are probably much better off looking for the forum which matches your phone to get the advice you need.
Click to expand...
Click to collapse
your wrong for that,sir.
as this is a problem related to hooking up the nexus.
ghost010 said:
Remove all the samsung USB driver's and regulair drivers you allready have installed.
than update your windows 7 to latest update.
reboot.
and try again.
let us know if that helped.
---------- Post added at 02:02 PM ---------- Previous post was at 02:01 PM ----------
your wrong for that,sir.
as this is a problem related to hooking up the nexus.
Click to expand...
Click to collapse
Thank you for the advice. I will try that out this evening and will report back...
any update on this?
found this thread by google as i had the same problem. if anyone is still interested, it got it fixed by installing the update while the nexus was connected.
Morgoth_RB said:
found this thread by google as i had the same problem. if anyone is still interested, it got it fixed by installing the update while the nexus was connected.
Click to expand...
Click to collapse
Thanks for posting this information. IMO, leaving the device plugged in is counterintuitive when updating that but it does resolve the problem.
What I'd suggest is as mentioned before, through control remove any and all drivers you have installed and then try the universal drivers 0.7 in the Dev section. I can confirm they work a treat on windows 7. One sec and I'll get a link for you
http://forum.xda-developers.com/showthread.php?t=1379875
So when you plug your phone in windows may try and auto install the drivers, can cell windows for doing anything and then manually direct it to look for where ever you put the universal one. This will work in both adb mode (phone on) and fast boot mode and will also work using a tool kit.
Sent from my Galaxy Nexus
Thank you!
Morgoth_RB said:
found this thread by google as i had the same problem. if anyone is still interested, it got it fixed by installing the update while the nexus was connected.
Click to expand...
Click to collapse
I was searching the web and joined this forum simply to say thank you for this information. I do not have a Samsung Nexus, but a Galaxy Reverb and the suggestion you gave worked perfectly on mine as well.

[Q] HP windows 7 bluetooth peripheral driver???????

So I can connect bluetooth to my laptop to a degree, in fact it worked just fine at first, then it stopped working and there's a yellow triangle on my device under windows devices, and when I do trouble shoot it says basically bluetooth peripherals not installed. I've read about going into device manager and installed all the yellow triangle bluetooth peripherals but not all of them are compatible with my phone. And now the samsung bluetooth peripheral isn't even there! I tried looking in HP drivers for anything bluetooth and currently downloading and installing everything I can, but the fact it specifically said peripheral makes me think it's something else I need to download, I just have no clue! I'm really baffled here, so if anyone has had a similar problem and figured it out please offer me some assistance. Thank you in advance.
rististien said:
So I can connect bluetooth to my laptop to a degree, in fact it worked just fine at first, then it stopped working and there's a yellow triangle on my device under windows devices, and when I do trouble shoot it says basically bluetooth peripherals not installed. I've read about going into device manager and installed all the yellow triangle bluetooth peripherals but not all of them are compatible with my phone. And now the samsung bluetooth peripheral isn't even there! I tried looking in HP drivers for anything bluetooth and currently downloading and installing everything I can, but the fact it specifically said peripheral makes me think it's something else I need to download, I just have no clue! I'm really baffled here, so if anyone has had a similar problem and figured it out please offer me some assistance. Thank you in advance.
Click to expand...
Click to collapse
wow, so no one can help me? Bumping this..... I can send files from phone to pc over bluetooh, and was finally able to send from phone to pc, but my comp got effed and I had to do a re-install, now it isn't working again. I can't be the only person with this problem!!!!!
rististien said:
wow, so no one can help me? Bumping this..... I can send files from phone to pc over bluetooh, and was finally able to send from phone to pc, but my comp got effed and I had to do a re-install, now it isn't working again. I can't be the only person with this problem!!!!!
Click to expand...
Click to collapse
Hey I am obviously a noob since this is my first post but I scoured the internet for the same solution. I found this website which gives you a step by step way to fix the problem. Hope this helps. Apparently I cannot post the website since I dont have 10 post.
---------- Post added at 10:44 PM ---------- Previous post was at 10:22 PM ----------
message me and ill send you the link. you cant send urls with out 10 post
---------- Post added at 10:49 PM ---------- Previous post was at 10:44 PM ----------
message me and ill send you the link.
solemnservant said:
Hey I am obviously a noob since this is my first post but I scoured the internet for the same solution. I found this website which gives you a step by step way to fix the problem. Hope this helps. Apparently I cannot post the website since I dont have 10 post.
---------- Post added at 10:44 PM ---------- Previous post was at 10:22 PM ----------
message me and ill send you the link. you cant send urls with out 10 post
---------- Post added at 10:49 PM ---------- Previous post was at 10:44 PM ----------
message me and ill send you the link.
Click to expand...
Click to collapse
I attempted to send you a pm but it does not seem to work for me. I went to a site called blog dot joelvincent dot com. Try searching on there for "Solved bluetooth peripheral device driver." this works for windows vista and 7. I found if you follow the 7 steps it will work completely. just remember to download Windows Mobile Device Center. He uses the drivers for that program to fix the issues with the phone.
If need more help I'd be happy to type out the entire procedure. Let me know.
I followed the link and turns out micosofts page to download the windows 7 one is down.... only vista up... makes one go hmmmm but at least I know what to google for, thanks a lot. I'll report back if I finally get it to work
solemnservant said:
I attempted to send you a pm but it does not seem to work for me. I went to a site called blog dot joelvincent dot com. Try searching on there for "Solved bluetooth peripheral device driver." this works for windows vista and 7. I found if you follow the 7 steps it will work completely. just remember to download Windows Mobile Device Center. He uses the drivers for that program to fix the issues with the phone.
If need more help I'd be happy to type out the entire procedure. Let me know.
Click to expand...
Click to collapse

[Q] Odin help?

I'm on the latest Tmobile stock firmware, and I'm trying to root. However, when I install Odin and put the phone into Download Mode, it doesn't connect after plugging in the USB cable. The box ID:COM stays blank. If I connect the phone while it's on, it'll connect as a media device, just not in Download Mode. Any pointers? Thanks in advance.
EDIT: In case anyone else has this problem, I resolved it by plugging the USB cable directly into the computer. I had an extension cable since my computer was in a bad spot. Stupid me.
Make sure ur USB debugging mode is turned on (under phone settings, developer options), if that doesnt do it...
Make sure kies is disabled (uninstall if need be - I technically never did but others reported it as a solution, so I might as well) , if that dont work...
Install Mskips latest toolkit and redownload his drivers (option 1 I believe)... you can still root whatever way you want but I havent heard anyone have issues connecting to Odin with his drivers
Sent from my SGH-T889 using xda app-developers app
---------- Post added at 07:51 PM ---------- Previous post was at 07:45 PM ----------
Also, might as well throw in, since your not rooted, now might be a good time to backup your phones modem/radio/NV/imei files as those things can mess up (as a few have reported, very few I should say) during the root process... very few but better safe than sorry
Sent from my SGH-T889 using xda app-developers app
Thanks for the response. USB debugging was on, Kies wasn't even installed. I'll try Mskip's tookbox and see. As for making a backup, what program do you suggest? Does the toolbox do it?
PhxDroid86 said:
Make sure ur USB debugging mode is turned on (under phone settings, developer options), if that doesnt do it...
Make sure kies is disabled (uninstall if need be - I technically never did but others reported it as a solution, so I might as well) , if that dont work...
Install Mskips latest toolkit and redownload his drivers (option 1 I believe)... you can still root whatever way you want but I havent heard anyone have issues connecting to Odin with his drivers
Sent from my SGH-T889 using xda app-developers app
---------- Post added at 07:51 PM ---------- Previous post was at 07:45 PM ----------
Also, might as well throw in, since your not rooted, now might be a good time to backup your phones modem/radio/NV/imei files as those things can mess up (as a few have reported, very few I should say) during the root process... very few but better safe than sorry
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
idlepaw said:
Thanks for the response. USB debugging was on, Kies wasn't even installed. I'll try Mskip's tookbox and see. As for making a backup, what program do you suggest? Does the toolbox do it?
Click to expand...
Click to collapse
This is what wad recently, I havent personally tested (ie restored) any of the various backup methods... but incase you missed it http://forum.xda-developers.com/showthread.php?p=37928582
Sent from my SGH-T889 using xda app-developers app

Request: LG G3 F460 file. Phone is screwed up after reseting the phone. "rooted"

Request: LG G3 F460 file. Phone is screwed up after reseting the phone. "rooted"
Hey guys I need help and I think you are the only people that can help me.
I have the Korean version of the LG G3 cat 6 460s. I rooted the phone using stump root and everything is fine.
today I decided to reset the phone and I did. now every time I power on the phone it prompt me for the initial setup of the phone, the volume up and down keys no longer works, notification doesn't work. the home button icon doesn't even work " only back button on the screen lol "
I tried to do hard reset by turning off the phone and holding the power and volume down button method but it doesn't work.
the only method I believe or I think I have a chance is with flash tool. but I really need the files required for this model. where can I get them.
is their an LG official pc suit for this model I can download from LG directly ? am I $%#ed ?
please help me in this I don't want an expensive paperweight phone
Lgbbs.net. did you check there?
This shouldn't be in development.
I honestly do not know where this should be in. but I figured this section is where most tech people who are into flashing roms will be available and I need help. sorry if it this is in the wrong section.
I did look into that site. they are charging 800 credits for it and each 50 credit is like 1$. so that file is 16$.
its not much and I will go for it if I do not have any alternative.
please guys let me know if there is any
also. which one do I need ? KDZ or TOT ?
I got the files. If you have some place to upload them I can share them to you (and everyone). Happened exactly the same to me.
MarcoZM1978 said:
I got the files. If you have some place to upload them I can share them to you (and everyone). Happened exactly the same to me.
Click to expand...
Click to collapse
http://www.speedyshare.com/
blazing fast no limit´s at all
please do, I need those files very badly.
also. I have a small problem I wonder if you guys can help me. I installed the drivers and flashtool. however, upon reading the instructions., I should change to COM 41 but I cant find that in my device manager, there is no LG related anything under my COM section.
also, I have under "other devices", CDC serial and LGE Android Phone are not properly installed. how can I install them correctly ?
ll_l_x_l_ll said:
please do, I need those files very badly.
also. I have a small problem I wonder if you guys can help me. I installed the drivers and flashtool. however, upon reading the instructions., I should change to COM 41 but I cant find that in my device manager, there is no LG related anything under my COM section.
also, I have under "other devices", CDC serial and LGE Android Phone are not properly installed. how can I install them correctly ?
Click to expand...
Click to collapse
Happened to me too. You need to delete some media device added when you connect the phone (thats what windows thinks it is) so it can auto-detect it again correctly.
Uploading the files now. I got a ****ty upload speed so be patient.
---------- Post added at 05:46 PM ---------- Previous post was at 05:35 PM ----------
ll_l_x_l_ll said:
please do, I need those files very badly.
also. I have a small problem I wonder if you guys can help me. I installed the drivers and flashtool. however, upon reading the instructions., I should change to COM 41 but I cant find that in my device manager, there is no LG related anything under my COM section.
also, I have under "other devices", CDC serial and LGE Android Phone are not properly installed. how can I install them correctly ?
Click to expand...
Click to collapse
Sorry, just got that you have the "other devices" so forget about the multimedia thing I said. You have to change the drivers (normally one of them is from microsoft) to the ones from LG (by updating manually and finding the inf in you HD manually). Windows will say the driver is not compatible but you can ignore that.
MarcoZM1978 said:
Happened to me too. You need to delete some media device added when you connect the phone (thats what windows thinks it is) so it can auto-detect it again correctly.
Uploading the files now. I got a ****ty upload speed so be patient.
---------- Post added at 05:46 PM ---------- Previous post was at 05:35 PM ----------
Sorry, just got that you have the "other devices" so forget about the multimedia thing I said. You have to change the drivers (normally one of them is from microsoft) to the ones from LG (by updating manually and finding the inf in you HD manually). Windows will say the driver is not compatible but you can ignore that.
Click to expand...
Click to collapse
I got it to work. I am just waiting for your files. Thanks allot for your help
Sent from my LG-F460S using XDA Free mobile app
ll_l_x_l_ll said:
I got it to work. I am just waiting for your files. Thanks allot for your help
Sent from my LG-F460S using XDA Free mobile app
Click to expand...
Click to collapse
I couldnt upload to the one you suggested so I ended up with google drive:
https://drive.google.com/folderview?id=0B3_3P8VBnuo2MGZvLXp6UVk3eTQ&usp=sharing
There is de DLL and a text file with the address in MEGA for the TOT file.
Tell me if you have any trouble.
After the whole process you will end with a blue or green screen (dont remember), dont worry, just reboot and you will be back on stock.
Good luck
Thank you. I will update later when I get home. Thanks again mate
Sent from my LG-F460S using XDA Free mobile app
Similar thing happened to me too, after I screwed up the file system. Download LG Flash Tool 2014 and the applicable .KDZ ROM, select normal, then wait for 100%
Oh and this does not wipe your device.
Edit: does not belong in Development, you have years experience and should know better.
Please post help and questions threads in the QUESTION AND ANSWER / TROUBLESHOOTING thread.
Under no circumstances should non development threads be started in the development section
Thread moved
ll_l_x_l_ll said:
Thank you. I will update later when I get home. Thanks again mate
Sent from my LG-F460S using XDA Free mobile app
Click to expand...
Click to collapse
No problem. If by the way you happen to get your hands in a non korean LG G3, can you share the LGWeather.apk located in system. I'm trying to get rid of kweather provider and home being in Korea.
MarcoZM1978 said:
No problem. If by the way you happen to get your hands in a non korean LG G3, can you share the LGWeather.apk located in system. I'm trying to get rid of kweather provider and home being in Korea.
Click to expand...
Click to collapse
I have it from my D850, I'll upload it for you.
Great!! Thank you so much
MarcoZM1978 said:
I couldnt upload to the one you suggested so I ended up with google drive:
https://drive.google.com/folderview?id=0B3_3P8VBnuo2MGZvLXp6UVk3eTQ&usp=sharing
There is de DLL and a text file with the address in MEGA for the TOT file.
Tell me if you have any trouble.
After the whole process you will end with a blue or green screen (dont remember), dont worry, just reboot and you will be back on stock.
Good luck
Click to expand...
Click to collapse
Link expired .. any other link ??? for F460s TOT ??
You have TOT F460L and DLL?

Z00A is not recognized by PC, not even charge only mode.

Whenever I try to connect it to my pc, it only charges but the option for mtp/ptp is not showing up. It's also not recognized by adb even though I enabled USB debugging. I tried reconnecting, reinstalling drivers but to no avail. Is this already a hardware failure or can I still do something about it?
notinthemood said:
Whenever I try to connect it to my pc, it only charges but the option for mtp/ptp is not showing up. It's also not recognized by adb even though I enabled USB debugging. I tried reconnecting, reinstalling drivers but to no avail. Is this already a hardware failure or can I still do something about it?
Click to expand...
Click to collapse
Does your phone still charge slowly from PC ? Does the charge light light up ?
Could be data cable became faulty and now only charges if it does.
Could be USB board.
Could be drivers.
Could be a windows update blocking your drivers.
Many things that only you can possibly try to possibly resolve but
1) first try a new data cable and another pc
timbernot said:
Does your phone still charge slowly from PC ? Does the charge light light up ?
Could be data cable became faulty and now only charges if it does.
Could be USB board.
Could be drivers.
Could be a windows update blocking your drivers.
Many things that only you can possibly try to possibly resolve but
1) first try a new data cable and another pc
Click to expand...
Click to collapse
The phone still charges, but really slow. Even though I only have the screen on, the battery level actually goes lower. The charging LED does light up.
I tried several cables already but to no avail. I will try connecting on my laptop and see how it goes.
notinthemood said:
The phone still charges, but really slow. Even though I only have the screen on, the battery level actually goes lower. The charging LED does light up.
I tried several cables already but to no avail. I will try connecting on my laptop and see how it goes.
Click to expand...
Click to collapse
How did it go ?
timbernot said:
How did it go ?
Click to expand...
Click to collapse
Well, it still did not read my phone. Installed the drivers first before connecting, tried other ports, other cables, but still not working. Also, when I try to charge it when open, it doesn't have the LED light on. But if it's turned off, it shows the LED.
@notinthemood
Now would be the ideal time to give details of IFWI version in Bootloader , build , date in settings etc .
Hopefully it is firmware problem now
And not USB board , or USB port attached to it , ugh !
I had this after MM came out and I tried everything to the point where I thought my usb port was broken.
I ended up completely wiping my phone (Internal memory too), then re-flashed MM firmware via ADB and it was fine.
Suspect I had a downloaded a dodgy/corrupt mod and it wiped part of the OS code for USB or just killed USB?
mckc001 said:
I had this after MM came out and I tried everything to the point where I thought my usb port was broken.
I ended up completely wiping my phone (Internal memory too), then re-flashed MM firmware via ADB and it was fine.
Suspect I had a downloaded a dodgy/corrupt mod and it wiped part of the OS code for USB or just killed USB?
Click to expand...
Click to collapse
Best and easiest method for future reference to rule out software , if in full stock M and providing a factory reset didnt suffice , is a simple official downgrade via ext sd , flashing the official downgrade version - NO PC required If problems then persist ,then it would be definately be hardware after.
https://forum.xda-developers.com/zenfone2/help/success-downgrade-mm-to-lp-via-sd-card-t3520642
If @notinthemood could follow if in stock M , this would be ideal to rule out software :good:
Here are some of the details of my software in the settings. Tell me if you need more. http://imgur.com/a/Ynl2J
notinthemood said:
Here are some of the details of my software in the settings. Tell me if you need more. http://imgur.com/a/Ynl2J
Click to expand...
Click to collapse
WOW you are in LP over a year old .
Download LP .198 last of the LP firmware to interna memory l> UL-WW LP 2.20.40.198 from asus and reboot :good:
When set up -- factory reset in settings immediately -- see if probs persist:good:
---------- Post added at 02:51 PM ---------- Previous post was at 02:47 PM ----------
@notinthemood >
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-2.20.40.198-user.zip
Have you tried to go in devoloper settings and "Select USB configuration"?
timbernot said:
WOW you are in LP over a year old .
Download LP .198 last of the LP firmware to interna memory l> UL-WW LP 2.20.40.198 from asus and reboot :good:
When set up -- factory reset in settings immediately -- see if probs persist:good:
---------- Post added at 02:51 PM ---------- Previous post was at 02:47 PM ----------
@notinthemood >
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-2.20.40.198-user.zip
Click to expand...
Click to collapse
Oh wait. Does that work on custom ROMs? It isn't really stock but rather a cleaned up rom.
notinthemood said:
Oh wait. Does that work on custom ROMs? It isn't really stock but rather a cleaned up rom.
Click to expand...
Click to collapse
Hence why i asked earlier your IFWI version , it would`ve determined your bootloader status being unlocked , since you never answered i assumed you wasnt unlocked !
When people try to help , its best you answer the questions to your best ability .
So , next questions are... do you have TWRP recovery ? is your IFWI version in bootloader 0094.0173 ?
If the answer is yes then --> try this.....AT your OWN risk ...as always !
https://forum.xda-developers.com/showpost.php?p=70780400&postcount=26
---------- Post added at 06:00 PM ---------- Previous post was at 05:51 PM ----------
Original post reads ;-
Whenever I try to connect it to my pc, it only charges but the option for mtp/ptp is not showing up. It's also not recognized by adb even though I enabled USB debugging. I tried reconnecting, reinstalling drivers but to no avail. Is this already a hardware failure or can I still do something about it?
What it should say is;-
I have these problems with a year old custom rom !
And the answer is quick and simple, >Flash back stock rom back up , Update and see if probs persist !
timbernot said:
Hence why i asked earlier your IFWI version , it would`ve determined your bootloader status being unlocked , since you never answered i assumed you wasnt unlocked !
When people try to help , its best you answer the questions to your best ability .
So , next questions are... do you have TWRP recovery ? is your IFWI version in bootloader 0094.0173 ?
If the answer is yes then --> try this.....AT your OWN risk ...as always !
https://forum.xda-developers.com/showpost.php?p=70780400&postcount=26
---------- Post added at 06:00 PM ---------- Previous post was at 05:51 PM ----------
Original post reads ;-
Whenever I try to connect it to my pc, it only charges but the option for mtp/ptp is not showing up. It's also not recognized by adb even though I enabled USB debugging. I tried reconnecting, reinstalling drivers but to no avail. Is this already a hardware failure or can I still do something about it?
What it should say is;-
I have these problems with a year old custom rom !
And the answer is quick and simple, >Flash back stock rom back up , Update and see if probs persist !
Click to expand...
Click to collapse
Oh my, sorry about that. I don't know how to check the IFWI version so I assumed that it's on the about page in the settings. And yes I do have TWRP.
All OK now ? Fixed ? Reboot to bootloader for IFWI version, you are on a year old custom ROM so IFWI should be what I stated earlier anyhow.
Just had a check at your recent posts
You are a maintainer for another device it seems , strange you have not sorted this out already
timbernot said:
All OK now ? Fixed ? Reboot to bootloader for IFWI version, you are on a year old custom ROM so IFWI should be what I stated earlier anyhow.
Just had a check at your recent posts
You are a maintainer for another device it seems , strange you have not sorted this out already
Click to expand...
Click to collapse
IFWI version is 0094.0177. Would it still be fine to flash that stock rom?
I actually misplaced this phone for almost a year. Just found it again and it's a mess but I still want to use it since it is a powerful device.
@notinthemood
Restore your back up first . A maintainer of another device surely knows the basics ?????
I'm pretty sure .0177 is locked bootloader, maybe my mind is playing tricks on me and .0173 is and 0177 is unlocked ,
If you have root , does it function OK ?
Maybe , with the device being over a year old , use Asus bootloader unlock app to be on the safe side.
Even so , sounds all very strange to me
Goodluck
timbernot said:
@notinthemood
Restore your back up first . A maintainer of another device surely knows the basics ?????
I'm pretty sure .0177 is locked bootloader, maybe my mind is playing tricks on me and .0173 is and 0177 is unlocked ,
If you have root , does it function OK ?
Maybe , with the device being over a year old , use Asus bootloader unlock app to be on the safe side.
Even so , sounds all very strange to me
Goodluck
Click to expand...
Click to collapse
Root functionality is fine. Reinstalled Greenify and it asked for root access and I was able to grant it. Also, I used Asus official bootloader unlocker before. The white background when booting confirms that it is unlocked, right?
Also, I already have restored its backup. I thought that would fix the problem but it didn't.
notinthemood said:
Root functionality is fine. Reinstalled Greenify and it asked for root access and I was able to grant it. Also, I used Asus official bootloader unlocker before. The white background when booting confirms that it is unlocked, right?
Also, I already have restored its backup. I thought that would fix the problem but it didn't.
Click to expand...
Click to collapse
OK follow that link I posted , the reply I put there applies to you here also
timbernot said:
OK follow that link I posted , the reply I put there applies to you here also
Click to expand...
Click to collapse
Alright. Will update you later once I finish the process.

Categories

Resources