Hey all I'm not sure what happened but I reflashed to stock KitKat and while I did that I installed all the newest updates to receive Lolipop and after I finished that I downloaded CF-AutoRoot. I rooted it and got stuck with a bootloop so I went into the stock recovery and erased everything. So I repeated step one by reflashing KitKat and now Odin is giving me an error and it isn't working.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1ANIE_N910PSPT1ANIE_N910PVPU1ANIE_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas? I'm about to pull my hair out
So you took OTA updates to 5.1.1? If so, you can't go back to KitKat which is why Odin fails. You'll have to Odin OG5 tar in order to get back to working order. CF autoroot won't work on 5.1.1 either and probably gave you the bootloop. You'll have to flash a modded kernel or entire prerooted 5.1.1 ROM to get root
I think I got it to work now
Related
I am on 4.4.2 and stuck..... I can flash TWRP/CWM recoveries and CF-Auto-Root-jfltetmo no problem but whenever I go to Flash M919UVUFNB4_M919TMBFNB4_M919UVUFNB4_HOME.tar.md5 via odin, i get the following ... then it fails.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can install roms from the recovery but I absolutely need Wifi calling/sms/mms. I have terrible service in my apartment and at work as well. Installed hyper v6 but was told I need to odin/kies to 4.4.4.
Any help would be greatly appreciated!
zero visual said:
I am on 4.4.2 and stuck..... I can flash TWRP/CWM recoveries and CF-Auto-Root-jfltetmo no problem but whenever I go to Flash M919UVUFNB4_M919TMBFNB4_M919UVUFNB4_HOME.tar.md5 via odin, i get the following ... then it fails.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can install roms from the recovery but I absolutely need Wifi calling/sms/mms. I have terrible service in my apartment and at work as well. Installed hyper v6 but was told I need to odin/kies to 4.4.4.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
when you flashed to NH7 aka 4.4.4. it failed via odin. Its either a bad download or a usb problem. Try re-dowloading the NH7 FW aka 4.4.4 and flash via odin. then flash the root tar, than the philz custom recovery tar, both like you did with the firmware, reboot recovery and wipe cache and reboot.
i'll give that a try and let you know how it goes. Downloading it again right now as we speak.
Try the latest cwm recovery, KK needs to be flashed with most current custom recovery's.
Pp.
det0xx said:
when you flashed to NH7 aka 4.4.4. it failed via odin. Its either a bad download or a usb problem. Try re-dowloading the NH7 FW aka 4.4.4 and flash via odin. then flash the root tar, than the philz custom recovery tar, both like you did with the firmware, reboot recovery and wipe cache and reboot.
Click to expand...
Click to collapse
No go... I redownloaded NH7 and odin3.09 from sammobile.com samething that happned. I even tried different usb cable and multiple ports... and other idea's?
What rom are you running at present?
Pp.
Phone can't go to recovery mode but can still go to download mode.
tried flashing stock rom with odin v3.07 and 3.09 but got the following messages:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
USB driver installed, tried different ports, different roms, usb cables
can anyone tell me what I can do?
Flash nk2 firmware instead of mdl and see if that works, there may be some remnant that won't allow you to flash ancient firmware.
Don't sweat knox, its harmless.
Pp.
Thanks! it works now.
Hello all,
I have a Samsung Note 4 from sprint. I tried rooting my phone earlier and then it just began to restart over and over. I researched and found some solutions which none have worked thus far. Maybe someone can help me out. Current things that I have tried.
1. Rebooted the device and did a factory reset and clearing the cache hoping that would fix the problem. The phone just continued to restart.
2. Next I downloaded the original firmware for my device that I found. The name was GalaxyNote4/SM-N910P/5.0.1/N910PVPU1BOB7_N910PSPT1BOB7_SPR.zip I tried using this and got the Fail! using Odin3 V 3.10
Here is what the Log says:
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1BOB7_N910PSPT1BOB7_N910PVPU1BOB7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be much appreciated, thank you for your time.
What firmware/rom did you start with? Sounds like you were on something beyond OB7, like OE1, OF5 or OG5 none of which will allow downgrading to OB7.
Sent from my SM-N910P using Tapatalk
I tried to root my phone and it got stuck in bootloop , now every time I try to flash with Odin I get <ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1ANK2_N910PSPT1ANK2_N910PVPU1ANK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Ive tried all different stock firmware and all of them do the same
You were running kit kat when you tried to root? I ask because that is what you're trying to Odin. If you were ever on lollipop bootloader beyond OB7 you cannot downgrade.
Sent from my SM-N920P using Tapatalk
I recently bought a phone from Freedom Pop for one of my kids, I not a fan of how the phone uses there dialer and there text message app so, i want to revert the ROM back to the Sprint stock ROM and i'm running into some issues and i'm stuck
I have download the rom from here http://stockroms.net/file/GalaxyS3/SPH-L710
i'm using Odin3 v3.09 (i have also tried and older version did work)
and I have installed the drivers for the phone
when i start to flash the phone i receive a fail error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I think i have ran into the issue before with another Sprint Galaxy S3 that i root and then reverted back to stock but don't remember how or what i did to fix, I think it's related to the ROM but i need help as i'm trying to give this a gift for son for christmas
solved - i found another room from http://www.sammobile.com/firmwares/confirm/41671/L710VPUDNJ2_L710SPRDNJ2_SPR/ that worked with no issue
mcolvin2005 said:
I recently bought a phone from Freedom Pop for one of my kids, I not a fan of how the phone uses there dialer and there text message app so, i want to revert the ROM back to the Sprint stock ROM and i'm running into some issues and i'm stuck
I have download the rom from here http://stockroms.net/file/GalaxyS3/SPH-L710
i'm using Odin3 v3.09 (i have also tried and older version did work)
and I have installed the drivers for the phone
when i start to flash the phone i receive a fail error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I think i have ran into the issue before with another Sprint Galaxy S3 that i root and then reverted back to stock but don't remember how or what i did to fix, I think it's related to the ROM but i need help as i'm trying to give this a gift for son for christmas
Click to expand...
Click to collapse
The ROM that it ships on from FreedomPop is pretty much the Stock Sprint ROM with minor changes. You can just uninstall/disable the applications mentioned.
You should follow the instructions here if you want to use ODIN and flash the unmodified Stock Sprint ROM.
EDIT: Oops missed the second post
I just used TWRP. I've never used Odin.