Odin FAIL! Need some help please. - Sprint Galaxy Note 4 Q&A, Help & Troubleshooting

Hello all,
I have a Samsung Note 4 from sprint. I tried rooting my phone earlier and then it just began to restart over and over. I researched and found some solutions which none have worked thus far. Maybe someone can help me out. Current things that I have tried.
1. Rebooted the device and did a factory reset and clearing the cache hoping that would fix the problem. The phone just continued to restart.
2. Next I downloaded the original firmware for my device that I found. The name was GalaxyNote4/SM-N910P/5.0.1/N910PVPU1BOB7_N910PSPT1BOB7_SPR.zip I tried using this and got the Fail! using Odin3 V 3.10
Here is what the Log says:
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1BOB7_N910PSPT1BOB7_N910PVPU1BOB7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be much appreciated, thank you for your time.

What firmware/rom did you start with? Sounds like you were on something beyond OB7, like OE1, OF5 or OG5 none of which will allow downgrading to OB7.
Sent from my SM-N910P using Tapatalk

Related

[HELP]Note 2 stuck at tmobile screen

A friend of mine bought a refurb note 2 a while ago and im trying to help her fix her phone. The problem is it's stuck on tmobile bootscreen and it wont boot to recovery mode for some reason. Although it can boot to download mode and I doubt its rooted cause knox warranty says 0, I could be wrong though. Has anyone had this problem? Any help/suggestions would be greatly appreciated.
EDIT: I just tried premiatul's suggestion earlier but odin gave me an error.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T889UVUCMK7_2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I used the 4.3 JB Stock Rom and it didn't work. Now I'm back to square one
Flash this with ODIN:
http://forum.xda-developers.com/showthread.php?t=1975560
Sent from my SGH-T889 using xda premium
premiatul said:
Flash this with ODIN:
http://forum.xda-developers.com/showthread.php?t=1975560
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Should I flash it with 4.3 jelly bean? Idk what version she has but does it matter?
premiatul said:
Flash this with ODIN:
http://forum.xda-developers.com/showthread.php?t=1975560
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
I just tried premiatul's suggestion earlier but odin gave me an error.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T889UVUCMK7_2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I used the 4.3 JB Stock Rom and it didn't work. Now I'm back to square one
Anyone? I'm not sure If I'm even flashing the right ROM cause I don't even know the phone's firmware version.
Bump!

[Resolved] [HELP] Complete(Wrtie) Operation failed

Phone can't go to recovery mode but can still go to download mode.
tried flashing stock rom with odin v3.07 and 3.09 but got the following messages:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
USB driver installed, tried different ports, different roms, usb cables
can anyone tell me what I can do?
Flash nk2 firmware instead of mdl and see if that works, there may be some remnant that won't allow you to flash ancient firmware.
Don't sweat knox, its harmless.
Pp.
Thanks! it works now.

help tried to root and bricked phone note 4 SM-n910p

I tried to root my phone and it got stuck in bootloop , now every time I try to flash with Odin I get <ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1ANK2_N910PSPT1ANK2_N910PVPU1ANK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Ive tried all different stock firmware and all of them do the same
You were running kit kat when you tried to root? I ask because that is what you're trying to Odin. If you were ever on lollipop bootloader beyond OB7 you cannot downgrade.
Sent from my SM-N920P using Tapatalk

I think my phone is bricked

Hey all I'm not sure what happened but I reflashed to stock KitKat and while I did that I installed all the newest updates to receive Lolipop and after I finished that I downloaded CF-AutoRoot. I rooted it and got stuck with a bootloop so I went into the stock recovery and erased everything. So I repeated step one by reflashing KitKat and now Odin is giving me an error and it isn't working.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1ANIE_N910PSPT1ANIE_N910PVPU1ANIE_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas? I'm about to pull my hair out
So you took OTA updates to 5.1.1? If so, you can't go back to KitKat which is why Odin fails. You'll have to Odin OG5 tar in order to get back to working order. CF autoroot won't work on 5.1.1 either and probably gave you the bootloop. You'll have to flash a modded kernel or entire prerooted 5.1.1 ROM to get root
I think I got it to work now

Freedompop - Sprint Galaxy S3 SPH-L710

I recently bought a phone from Freedom Pop for one of my kids, I not a fan of how the phone uses there dialer and there text message app so, i want to revert the ROM back to the Sprint stock ROM and i'm running into some issues and i'm stuck
I have download the rom from here http://stockroms.net/file/GalaxyS3/SPH-L710
i'm using Odin3 v3.09 (i have also tried and older version did work)
and I have installed the drivers for the phone
when i start to flash the phone i receive a fail error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I think i have ran into the issue before with another Sprint Galaxy S3 that i root and then reverted back to stock but don't remember how or what i did to fix, I think it's related to the ROM but i need help as i'm trying to give this a gift for son for christmas
solved - i found another room from http://www.sammobile.com/firmwares/confirm/41671/L710VPUDNJ2_L710SPRDNJ2_SPR/ that worked with no issue
mcolvin2005 said:
I recently bought a phone from Freedom Pop for one of my kids, I not a fan of how the phone uses there dialer and there text message app so, i want to revert the ROM back to the Sprint stock ROM and i'm running into some issues and i'm stuck
I have download the rom from here http://stockroms.net/file/GalaxyS3/SPH-L710
i'm using Odin3 v3.09 (i have also tried and older version did work)
and I have installed the drivers for the phone
when i start to flash the phone i receive a fail error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I think i have ran into the issue before with another Sprint Galaxy S3 that i root and then reverted back to stock but don't remember how or what i did to fix, I think it's related to the ROM but i need help as i'm trying to give this a gift for son for christmas
Click to expand...
Click to collapse
The ROM that it ships on from FreedomPop is pretty much the Stock Sprint ROM with minor changes. You can just uninstall/disable the applications mentioned.
You should follow the instructions here if you want to use ODIN and flash the unmodified Stock Sprint ROM.
EDIT: Oops missed the second post
I just used TWRP. I've never used Odin.

Categories

Resources