help tried to root and bricked phone note 4 SM-n910p - Sprint Galaxy Note 4 Q&A, Help & Troubleshooting

I tried to root my phone and it got stuck in bootloop , now every time I try to flash with Odin I get <ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1ANK2_N910PSPT1ANK2_N910PVPU1ANK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Ive tried all different stock firmware and all of them do the same

You were running kit kat when you tried to root? I ask because that is what you're trying to Odin. If you were ever on lollipop bootloader beyond OB7 you cannot downgrade.
Sent from my SM-N920P using Tapatalk

Related

[Q] Stuck in bootloop after flashing Android_Revolution_HD-Note2_20.1

Hi,
A brief background...I downloaded and flashed Android_Revolution_HD-Note2_20.1 successfully...
After completing all the things I was checking SU and tried updating it when it asked me i choose TWRP/CWM and the phone restart with bootloop... and can't enter recovery...
What should I do now...I am stuck badly!!! Please help
Thanks in advance
Cheers
additional info
I tried to flash stock rom and it failed
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100DDUEML4_N7100ODDEML2_N7100DDEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help!!!

[Q] [Help] NAND Write Start!!

I was on T889UVALL4, use Odin to flash root66_TMO_T889UVUCMK7_2.tar.md5, got PASS, phone stuck in boot loop, can not get into recovery mode, so I try flashing again and got the following error. ( i flash KIES_HOME_T889UVALL4_T889TMBALL4_598701_REV04_user _low_ship.tar.md5 with the same result)
Please help.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T889UVUCMK7_2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
here is the Odin log for stock firmware:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_T889UVALL4_T889TMBALL4_598701_REV04_user _low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My question is: Can this be fix with Odin? or do I need to fix a shop that can repair the EMMC? if it is the latter, does anyone know where to find a trust worthy shop with in the San Francisco bay area?
Thanks
onqq said:
I was on T889UVALL4, use Odin to flash root66_TMO_T889UVUCMK7_2.tar.md5, got PASS, phone stuck in boot loop, can not get into recovery mode, so I try flashing again and got the following error. ( i flash KIES_HOME_T889UVALL4_T889TMBALL4_598701_REV04_user _low_ship.tar.md5 with the same result)
Please help.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T889UVUCMK7_2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
here is the Odin log for stock firmware:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_T889UVALL4_T889TMBALL4_598701_REV04_user _low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My question is: Can this be fix with Odin? or do I need to fix a shop that can repair the EMMC? if it is the latter, does anyone know where to find a trust worthy shop with in the San Francisco bay area?
Thanks
Click to expand...
Click to collapse
I found a pit file and try flashing with Odin, here is the output:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does that mean my EMMC is corrupted and needs repairing? :crying:
Boot into recovery and Factory/Data Reset
See if that helps
Double0EK said:
Boot into recovery and Factory/Data Reset
See if that helps
Click to expand...
Click to collapse
unfortunately, I can't get into recovery.
when I press volume up+home+power button, I just get a flashing Samsung Galaxy 2 logo (aka boot loop hell)
onqq said:
unfortunately, I can't get into recovery.
when I press volume up+home+power button, I just get a flashing Samsung Galaxy 2 logo (aka boot loop hell)
Click to expand...
Click to collapse
Get the tar file for the most recent TWRP and Odin that. Boot into recovery and factory reset. Try booting normally. If that fails try to Odin the UVALJ1 tar by MrRobinson. (2-3 times). Try booting normally. Once you can boot normally go ahead and try the MK7 tar.

[Resolved] [HELP] Complete(Wrtie) Operation failed

Phone can't go to recovery mode but can still go to download mode.
tried flashing stock rom with odin v3.07 and 3.09 but got the following messages:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
USB driver installed, tried different ports, different roms, usb cables
can anyone tell me what I can do?
Flash nk2 firmware instead of mdl and see if that works, there may be some remnant that won't allow you to flash ancient firmware.
Don't sweat knox, its harmless.
Pp.
Thanks! it works now.

Odin FAIL! Need some help please.

Hello all,
I have a Samsung Note 4 from sprint. I tried rooting my phone earlier and then it just began to restart over and over. I researched and found some solutions which none have worked thus far. Maybe someone can help me out. Current things that I have tried.
1. Rebooted the device and did a factory reset and clearing the cache hoping that would fix the problem. The phone just continued to restart.
2. Next I downloaded the original firmware for my device that I found. The name was GalaxyNote4/SM-N910P/5.0.1/N910PVPU1BOB7_N910PSPT1BOB7_SPR.zip I tried using this and got the Fail! using Odin3 V 3.10
Here is what the Log says:
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1BOB7_N910PSPT1BOB7_N910PVPU1BOB7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be much appreciated, thank you for your time.
What firmware/rom did you start with? Sounds like you were on something beyond OB7, like OE1, OF5 or OG5 none of which will allow downgrading to OB7.
Sent from my SM-N910P using Tapatalk

flash grand i9082 failing

Hey guys!
Im trying to flash the stock rom, but I just wont work.
Logs:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXUBMGA_I9082OXEBMGA_I9082XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> vc-firmware.img
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I get failure are BcmCP.img
I am using a Odin 3.04
Still getting error, tried different USB ports, different cables, plenty different things
Can someone help? My phone is unusable

Categories

Resources