So I rooted my s4 mini i9195 and flashed aicp ver 10 and now I have no wifi, no mobile, no lte, the haptic feedback buttons don't work, no led, and my computer doesn't recognize the s4 mini unless I go into download mode. When I start up the phone it says something about something being wrong with the internal hardware of my phone but it's a brand new phone and I didn't have these problems before flashing this rom. I tried using odin to go back to stock and it fails at nand-write start. I tried loading a new pit and that fails too. I'm completely stuck now. I have no idea what to do. Can someone please help me?
How you flashed aicp?
I used cwm.
Here's what comes up on odin when I try to flash back to stock:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCOD3_I9195BTUCOD1_I9195XXUCOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Can you enter in recovery mode?
yeah, I can. I tried clearing caches and data and flashing aicp over again, it didn't work-in fact, for whatever reason the aicp rom isn't in my sd card anymore.
Try to flash a stock deodexed rom from here http://forum.xda-developers.com/showthread.php?t=2552363 using your custom recovery
the problem with that is I can't get anything from my computer to my phone because the phone doesn't pop up on My Computer and the phone doesn't give me any options when it's plugged in. It's only recognized when in download mode and trying to do anything in download mode doesn't seem to work.
Download direct to you phone and then move to sdcard or download to pc and than just using a card reader move rom to your sdcard and then try to flash
I can't download directly to my phone, I have no connection whatsoever on my phone.
Use a computer and a card reader ))
I'm going to get an sd reader later today. I tried flashing the modem and this is what I got:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9195XXUCOC2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006>
<ID:0/006> Receive Response from boot-loader
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
What firmware did you have before flashing aicp?
It was android 4.4.2 touchwiz I believe but I don't know the details. The phone was up-to-date and it's I9195
Whatever try to restore to a stock rom by flashing a deodexed rom
so the rom flashed properly but I still didn't have mobile data or wifi or haptic feedback. I'm not really worried about the haptic keys because I can just use softkeys if necessary but the mobile data and wifi are an issue. LED worked when I shut the phone down to put it into download mode to flash the modem. Flashing the modem was unsuccessful:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9195XXUCOC2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005>
<ID:0/005> Receive Response from boot-loader
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
And the phone came up with red lettered "Secure Check Fail Modem"
Try to call *#06# And tell what you get
At least look here http://forum.xda-developers.com/gal...rom-aicp-6-0-kk-4-4-4-9195-919015-10-t2907258
IMEI 990004400585315 / 01
I looked on that thread but nothing about my issue is coming up.
<ID:0/005> Receive Response from boot-loader
<ID:0/005> Complete(Write) operation failed.
Does this mean that I should flash a new bootloader? I never unlocked knox because beyond voiding the warranty, I didn't think it would have any effect on flashing but I may be wrong?
Your phone is definitely a "i9195" and not a "i9195L"? Was your phone locked to a network?
I found this http://forums.androidcentral.com/sa...ot-flash-really-really-stuck-please-help.html try to do how is described in the last thread but remember that you have a 9195 not a s3
Related
was getting ready to go to CM10 and wanted to wipe everything on my phone. went through and erased all user data, cache, etc... however, i also wiped the system partition. now i dont have a new zip to flash to install the firmware again and i cant mount it to USB to transfer one. has anyone seen anywhere to get the CM roms in tar or md5 format so i can just flash them from odin?
any other ideas would also be appreciated.
found an at&t stock rom so far (im using rogers so dont know if that is causing this error) when i go to flash it i get:
<ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCALEM_I747ATTALEM_I747UCALEM_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
ok just a followup.... it failed because i was trying to flash an AT&T rom. also, samsung-updates is slow as hell and my download failed 3 times. I used this in the end
d-h.st/oDF
just leaving this here in case anyone has the issue
Alright, so I'm currently having some issues after attempting to install Sungsonic's latest ROM (V-7) and I'm stuck in a bootloop as well as CWM etc isn't working. I do however have access to the Odin Downloader (Standard Recovery?) yet flashing any type of recovery won't work.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.02.1-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Here's the log for when I attempted to get Philz running.
So summed up, Volume Down, home and power works and puts me into the Downloading mode but Volume up, home and power does nothing and will only show the N7100 logo briefly before restarting and doing the same thing. Anyone got an idea of what I can do next?
Hi guys,
so I've got a Note 2 UK version, which had problems upgrading (had a stock rom).
I so decided to ODIN a new stock rom (4.4.2 UK from SamMobile), which I failed.
It was good until the very last bit - it failed on flashing modem.bin.
I've tried re-downloading the rom, re-booting the phone, and everything I could find to do, but they were all no good.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNE1_N7100BTUFNE1_N7100XXUFND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> modem.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've also tried flashing only modem.bin alone, which didn't work, so i guess it's the problem with flashing modem.bin.
Btw, I've tried both ODIN v1.85 and v3,04.
Not sure if this will have an effect, but the sim card doesn't read, so I was thinking that the sim card tray has a problem.
I ordered one to replace it - again, not sure if this makes any difference.
It's now stuck on 'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.' screen.
I can go into download mode, but nothing else.
Please help!
Thanks
Miracle.vl63 said:
Hi guys,
so I've got a Note 2 UK version, which had problems upgrading (had a stock rom).
I so decided to ODIN a new stock rom (4.4.2 UK from SamMobile), which I failed.
It was good until the very last bit - it failed on flashing modem.bin.
I've tried re-downloading the rom, re-booting the phone, and everything I could find to do, but they were all no good.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNE1_N7100BTUFNE1_N7100XXUFND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> modem.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've also tried flashing only modem.bin alone, which didn't work, so i guess it's the problem with flashing modem.bin.
Btw, I've tried both ODIN v1.85 and v3,04.
Not sure if this will have an effect, but the sim card doesn't read, so I was thinking that the sim card tray has a problem.
I ordered one to replace it - again, not sure if this makes any difference.
It's now stuck on 'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.' screen.
I can go into download mode, but nothing else.
Please help!
Thanks
Click to expand...
Click to collapse
Not.sure.if.it will make any difference but the latest roms are recommended to use.odin 3.09
hi, today i was trying to downgrade from 4.4 to 4.3 but i think i messed up
anyways, im trying to flash "L900VPUBMK4_L900SPTBMK4_HOME.tar.md5" but i keep getting
on phone "sw rev.check fail. device:3, binary:2"
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006>
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
on newer odin i get
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L900VPUBMK4_L900SPTBMK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
also i can access download mode and cwm recovery.
can any one help me??? plzzzz any help is apreciated
If you're on the latest NE2 firmware it is impossible to downgrade back to mk4 due to Knox boot loader, download the NE2 tar and flash it thru Odin... good luck! You might have to look for a partition fix posted by jlmancuso somewhere in a buried thread...
I was able to flash http://forum.xda-developers.com/showthread.php?t=2541395 using twrp and abd. After that i downloaded mobile odin and installed stock mk4
Sent from my SPH-L900 using XDA Free mobile app
I just got this AT&T version of the Note 8 from a buddy, and am having a hard time flashing to CM13 6.0.1 with Odin 3.10.7. I have it rooted, but every time I try to flash the I467M_BNF5_BNF5.tar.md5 file, it fails. This is what I am getting:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> tz.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I feel like I am forgetting to do something trivial, so any help would be much appreciated
That has a locked bootloader. There is no custom recovery for that model. So roms are a no go on the ATT version.
Ah damn. I don't even want the phone part of it. I was trying to speed it up a little bit and get some customization options. I guess I can't be too angry because I only paid $75 for it and he had some pictures of his ex leftover on there. Thanks man