[Q] unbrick galaxy note 2 2sph l900/ flashing stock firmware - Sprint Samsung Galaxy Note II

hi, today i was trying to downgrade from 4.4 to 4.3 but i think i messed up
anyways, im trying to flash "L900VPUBMK4_L900SPTBMK4_HOME.tar.md5" but i keep getting
on phone "sw rev.check fail. device:3, binary:2"
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006>
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
on newer odin i get
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L900VPUBMK4_L900SPTBMK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
also i can access download mode and cwm recovery.
can any one help me??? plzzzz any help is apreciated

If you're on the latest NE2 firmware it is impossible to downgrade back to mk4 due to Knox boot loader, download the NE2 tar and flash it thru Odin... good luck! You might have to look for a partition fix posted by jlmancuso somewhere in a buried thread...

I was able to flash http://forum.xda-developers.com/showthread.php?t=2541395 using twrp and abd. After that i downloaded mobile odin and installed stock mk4
Sent from my SPH-L900 using XDA Free mobile app

Related

Odin fail

Hello I am new to rooting, but i wanted to start with a stock rom w/root and go from there. Now I followed (or thought i followed) the guides using Odin but i keep getting a fail. This is what it looks like:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t0lte-t0ltexx-gtn7105.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Also I am on Verizon (US) 4G LTE version. Model # SCH-1605
Sorry if this is in the wrong place.
Sent from my SCH-I605 using xda app-developers app
What odin version are you using???
Try odin epic 4g
Sent from my GT-N7100 using xda app-developers app
Remo2V56 said:
Hello I am new to rooting, but i wanted to start with a stock rom w/root and go from there. Now I followed (or thought i followed) the guides using Odin but i keep getting a fail. This is what it looks like:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t0lte-t0ltexx-gtn7105.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Also I am on Verizon (US) 4G LTE version. Model # SCH-1605
Sorry if this is in the wrong place.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Because you're attempting to flash wrong file.
btw Your device is SCH-i605, not SCH-1605
Download the correct file for your device (SCH-i605) from here http://autoroot.chainfire.eu/

Tried to unroot but now I can't root or downgrade to pre-patched rom

I was installing cyanogenmod but something soft-briked it so I went back and did the unrooting process but this time installed 4.4.2 instead of the older rom. After trying to root I learned that the stock rom I was on patched rooting away. Now I'm stuck and even trying to downgrade I get the following error in odin. All my searching I haven't found anything on how to fix this. Can someone help, all the guides on the forum do not work.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Guess I didn't need to do that, still was able to flash custom rom, thought i lost that ability. Now I only have to worry about the whole flag for warranty
.
Try getting another stock file, what I mean by another I mean find it from xdas s4 thread and a new version of Odin, preferably a older version
Sent from my SGH-M919 using XDA Premium 4 mobile app

[Q] ODIN failed putting in stock rom

Hello,
I recently decided to pull the custom rom my SM-T210R was running and go back into the latest stock image (T210RUEU0COB1_T210RXAC0COB1_XAC). For what ever reason it failed like this:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210RUEU0COB1_T210RXAC0COB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> PBL.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> loke_2nd.bin
<ID:0/006> loke_pxa988.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> __XmitData_Write
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My SM-T210R shows:
ODIN MODE
Product Name: SM-T210R
Current Binary: Samsung Official
System Status: Custom
HW Rev: 0x5
Firmware upgrade encounter an issue. Please select recovery mode in Kies & try again.
Any ideas?
Thanks,
--CP
Ok...I think it was the ROM.
I tried T210RUEU0COB1_T210RXAR0COB1_XAR and it worked. Perhaps the XAR vs XAC thing, though this is from Canada.
CrazyPhil said:
Hello,
I recently decided to pull the custom rom my SM-T210R was running and go back into the latest stock image (T210RUEU0COB1_T210RXAC0COB1_XAC). For what ever reason it failed like this:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210RUEU0COB1_T210RXAC0COB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> PBL.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> loke_2nd.bin
<ID:0/006> loke_pxa988.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> __XmitData_Write
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My SM-T210R shows:
ODIN MODE
Product Name: SM-T210R
Current Binary: Samsung Official
System Status: Custom
HW Rev: 0x5
Firmware upgrade encounter an issue. Please select recovery mode in Kies & try again.
Any ideas?
Thanks,
--CP
Click to expand...
Click to collapse

serious aicp issues

So I rooted my s4 mini i9195 and flashed aicp ver 10 and now I have no wifi, no mobile, no lte, the haptic feedback buttons don't work, no led, and my computer doesn't recognize the s4 mini unless I go into download mode. When I start up the phone it says something about something being wrong with the internal hardware of my phone but it's a brand new phone and I didn't have these problems before flashing this rom. I tried using odin to go back to stock and it fails at nand-write start. I tried loading a new pit and that fails too. I'm completely stuck now. I have no idea what to do. Can someone please help me?
How you flashed aicp?
I used cwm.
Here's what comes up on odin when I try to flash back to stock:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCOD3_I9195BTUCOD1_I9195XXUCOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Can you enter in recovery mode?
yeah, I can. I tried clearing caches and data and flashing aicp over again, it didn't work-in fact, for whatever reason the aicp rom isn't in my sd card anymore.
Try to flash a stock deodexed rom from here http://forum.xda-developers.com/showthread.php?t=2552363 using your custom recovery
the problem with that is I can't get anything from my computer to my phone because the phone doesn't pop up on My Computer and the phone doesn't give me any options when it's plugged in. It's only recognized when in download mode and trying to do anything in download mode doesn't seem to work.
Download direct to you phone and then move to sdcard or download to pc and than just using a card reader move rom to your sdcard and then try to flash
I can't download directly to my phone, I have no connection whatsoever on my phone.
Use a computer and a card reader ))
I'm going to get an sd reader later today. I tried flashing the modem and this is what I got:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9195XXUCOC2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006>
<ID:0/006> Receive Response from boot-loader
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
What firmware did you have before flashing aicp?
It was android 4.4.2 touchwiz I believe but I don't know the details. The phone was up-to-date and it's I9195
Whatever try to restore to a stock rom by flashing a deodexed rom
so the rom flashed properly but I still didn't have mobile data or wifi or haptic feedback. I'm not really worried about the haptic keys because I can just use softkeys if necessary but the mobile data and wifi are an issue. LED worked when I shut the phone down to put it into download mode to flash the modem. Flashing the modem was unsuccessful:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9195XXUCOC2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005>
<ID:0/005> Receive Response from boot-loader
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
And the phone came up with red lettered "Secure Check Fail Modem"
Try to call *#06# And tell what you get
At least look here http://forum.xda-developers.com/gal...rom-aicp-6-0-kk-4-4-4-9195-919015-10-t2907258
IMEI 990004400585315 / 01
I looked on that thread but nothing about my issue is coming up.
<ID:0/005> Receive Response from boot-loader
<ID:0/005> Complete(Write) operation failed.
Does this mean that I should flash a new bootloader? I never unlocked knox because beyond voiding the warranty, I didn't think it would have any effect on flashing but I may be wrong?
Your phone is definitely a "i9195" and not a "i9195L"? Was your phone locked to a network?
I found this http://forums.androidcentral.com/sa...ot-flash-really-really-stuck-please-help.html try to do how is described in the last thread but remember that you have a 9195 not a s3

Odin failing on I467

I just got this AT&T version of the Note 8 from a buddy, and am having a hard time flashing to CM13 6.0.1 with Odin 3.10.7. I have it rooted, but every time I try to flash the I467M_BNF5_BNF5.tar.md5 file, it fails. This is what I am getting:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> tz.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I feel like I am forgetting to do something trivial, so any help would be much appreciated
That has a locked bootloader. There is no custom recovery for that model. So roms are a no go on the ATT version.
Ah damn. I don't even want the phone part of it. I was trying to speed it up a little bit and get some customization options. I guess I can't be too angry because I only paid $75 for it and he had some pictures of his ex leftover on there. Thanks man

Categories

Resources