Alright, so I'm currently having some issues after attempting to install Sungsonic's latest ROM (V-7) and I'm stuck in a bootloop as well as CWM etc isn't working. I do however have access to the Odin Downloader (Standard Recovery?) yet flashing any type of recovery won't work.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.02.1-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Here's the log for when I attempted to get Philz running.
So summed up, Volume Down, home and power works and puts me into the Downloading mode but Volume up, home and power does nothing and will only show the N7100 logo briefly before restarting and doing the same thing. Anyone got an idea of what I can do next?
Related
Hello,
I recently decided to pull the custom rom my SM-T210R was running and go back into the latest stock image (T210RUEU0COB1_T210RXAC0COB1_XAC). For what ever reason it failed like this:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210RUEU0COB1_T210RXAC0COB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> PBL.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> loke_2nd.bin
<ID:0/006> loke_pxa988.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> __XmitData_Write
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My SM-T210R shows:
ODIN MODE
Product Name: SM-T210R
Current Binary: Samsung Official
System Status: Custom
HW Rev: 0x5
Firmware upgrade encounter an issue. Please select recovery mode in Kies & try again.
Any ideas?
Thanks,
--CP
Ok...I think it was the ROM.
I tried T210RUEU0COB1_T210RXAR0COB1_XAR and it worked. Perhaps the XAR vs XAC thing, though this is from Canada.
CrazyPhil said:
Hello,
I recently decided to pull the custom rom my SM-T210R was running and go back into the latest stock image (T210RUEU0COB1_T210RXAC0COB1_XAC). For what ever reason it failed like this:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210RUEU0COB1_T210RXAC0COB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> PBL.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> loke_2nd.bin
<ID:0/006> loke_pxa988.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> __XmitData_Write
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My SM-T210R shows:
ODIN MODE
Product Name: SM-T210R
Current Binary: Samsung Official
System Status: Custom
HW Rev: 0x5
Firmware upgrade encounter an issue. Please select recovery mode in Kies & try again.
Any ideas?
Thanks,
--CP
Click to expand...
Click to collapse
So I rooted my s4 mini i9195 and flashed aicp ver 10 and now I have no wifi, no mobile, no lte, the haptic feedback buttons don't work, no led, and my computer doesn't recognize the s4 mini unless I go into download mode. When I start up the phone it says something about something being wrong with the internal hardware of my phone but it's a brand new phone and I didn't have these problems before flashing this rom. I tried using odin to go back to stock and it fails at nand-write start. I tried loading a new pit and that fails too. I'm completely stuck now. I have no idea what to do. Can someone please help me?
How you flashed aicp?
I used cwm.
Here's what comes up on odin when I try to flash back to stock:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCOD3_I9195BTUCOD1_I9195XXUCOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Can you enter in recovery mode?
yeah, I can. I tried clearing caches and data and flashing aicp over again, it didn't work-in fact, for whatever reason the aicp rom isn't in my sd card anymore.
Try to flash a stock deodexed rom from here http://forum.xda-developers.com/showthread.php?t=2552363 using your custom recovery
the problem with that is I can't get anything from my computer to my phone because the phone doesn't pop up on My Computer and the phone doesn't give me any options when it's plugged in. It's only recognized when in download mode and trying to do anything in download mode doesn't seem to work.
Download direct to you phone and then move to sdcard or download to pc and than just using a card reader move rom to your sdcard and then try to flash
I can't download directly to my phone, I have no connection whatsoever on my phone.
Use a computer and a card reader ))
I'm going to get an sd reader later today. I tried flashing the modem and this is what I got:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9195XXUCOC2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006>
<ID:0/006> Receive Response from boot-loader
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
What firmware did you have before flashing aicp?
It was android 4.4.2 touchwiz I believe but I don't know the details. The phone was up-to-date and it's I9195
Whatever try to restore to a stock rom by flashing a deodexed rom
so the rom flashed properly but I still didn't have mobile data or wifi or haptic feedback. I'm not really worried about the haptic keys because I can just use softkeys if necessary but the mobile data and wifi are an issue. LED worked when I shut the phone down to put it into download mode to flash the modem. Flashing the modem was unsuccessful:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9195XXUCOC2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005>
<ID:0/005> Receive Response from boot-loader
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
And the phone came up with red lettered "Secure Check Fail Modem"
Try to call *#06# And tell what you get
At least look here http://forum.xda-developers.com/gal...rom-aicp-6-0-kk-4-4-4-9195-919015-10-t2907258
IMEI 990004400585315 / 01
I looked on that thread but nothing about my issue is coming up.
<ID:0/005> Receive Response from boot-loader
<ID:0/005> Complete(Write) operation failed.
Does this mean that I should flash a new bootloader? I never unlocked knox because beyond voiding the warranty, I didn't think it would have any effect on flashing but I may be wrong?
Your phone is definitely a "i9195" and not a "i9195L"? Was your phone locked to a network?
I found this http://forums.androidcentral.com/sa...ot-flash-really-really-stuck-please-help.html try to do how is described in the last thread but remember that you have a 9195 not a s3
I just got this AT&T version of the Note 8 from a buddy, and am having a hard time flashing to CM13 6.0.1 with Odin 3.10.7. I have it rooted, but every time I try to flash the I467M_BNF5_BNF5.tar.md5 file, it fails. This is what I am getting:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> tz.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I feel like I am forgetting to do something trivial, so any help would be much appreciated
That has a locked bootloader. There is no custom recovery for that model. So roms are a no go on the ATT version.
Ah damn. I don't even want the phone part of it. I was trying to speed it up a little bit and get some customization options. I guess I can't be too angry because I only paid $75 for it and he had some pictures of his ex leftover on there. Thanks man
Hi guys,
I have a N7100 with TWRP 3.0.2-0 and Resurection Remix installed. My phone got stuck on GN2 logo when I woke up one day last week, hopefully anyone could help. Here are the symptoms:
normal boot will stuck on GN2 logo, it will not reboot, just stuck there. (I presume it's not bootloop in this case?)
get into recovery, TWRP 3.0.2-0 splash screen shows for 2-4 seconds, phone reboot (screen went dark), GN2 logo shows and stay.
able to get into download mode.
Here's the interesting part:
tried to flash other recovery with ODIN 3.09 and 3.11.1, the same TWRP 3.0.2-0 splash screen shows when access into recovery mode, phone reboot and stuck on GN2 logo. Have tried flashed stock recovery, philz 6.15.4, CWM 6.0.4.3, all still showing TWRP 3.0.2-0 splash screen. There were no errors, ODIN give a green PASS.
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1101)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
tried to flash original ROM from sammobile, ODIN give a green PASS, still stuck on GN2 logo.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1101)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> tz.img
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> modem.bin
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I failed to find any thread with the same symptoms as mine, most of them still could get into recovery or flash recovery. Appreciate if anyone could point me to any solutions that could revive my N7100. Thanks!
After flashing the full rom, did you do a factory reset before booting the stock rom for the first time?
Is there other way to do that other than going into recovery mode? as I can't get into recovery.
So I followed this guide [GUIDE] Fix an unflashable or soft bricked N7100! , and got the recovery package/ROM file (N7100XXUFNI4_OLBFNI1_v4.4.2_Repair_Firmware.rar) from else where (the original d/l link is dead). The .RAR file contains these 5 files:
AP_N7100XXUFNI4_2177951_REV04_user_low_ship_.tar.md5
BL_N7100XXUFNI4_2177951_REV04_user_low_ship.tar.md5
CP_N7100DXUFNI1_REV08_CL1477145.tar.md5
CSC_OLB_N7100OLBFNI1_2177951_REV04_user_low_ship.tar.md5
T03G_EUR_OPEN.pit
Flashed with all the files with .PIT and RePartition checked, ODIN gave a green PASS, but the same result; recovery shows TWRP 3.0.2 splash screen, stuck on GN2 logo.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1101)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> param.bin
<ID:0/007> tz.img
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> modem.bin
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> Receive Response from boot-loader
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I've used ODIN 3.09, 3.11.1, different USB cables, plugged into different USB ports. Anyone have any other solutions? Thanks.
Did you try flashing the full Stock File with PIT?
Sent from my Xiaomi Mi 5 using XDA Labs
harishdayanand said:
Did you try flashing the full Stock File with PIT?
Sent from my Xiaomi Mi 5 using XDA Labs
Click to expand...
Click to collapse
Dj bang bong kinkong
harish15 said:
Did you try flashing the full Stock File with PIT?
Sent from my Xiaomi Mi 5 using XDA Labs
Click to expand...
Click to collapse
Yes, did both with and without PIT.
Hi folks....
My mom's phone (SM-G530FZ) is stuck on the loading screen.
From what i've been told, the phone was charging when suddently the screen went "white" and automatically restarted.
From that moment, it does not start anymore and it's stuck on the loading screen (samsun logo etc).
I can enter the download mode, so i've tried to flash the original firmware (G530FZXXS1BPL1_G530FZITV1BPF1_G530FZXXU1BPI1_HOME.tar...one binary) with Odin with no luck, obtaining the following error
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I've then tried to download another firmware (G530FZXXU1ANL7_OXX1ANL4_v4.4.4_Repair_Firmware with BL+AP+CP+CSC+PIT) ...no luck again
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried also with different Odin's versions
Any idea on what might have happened and whether or not there is a way to fix it?
Thanks
Anybody?