Hi folks....
My mom's phone (SM-G530FZ) is stuck on the loading screen.
From what i've been told, the phone was charging when suddently the screen went "white" and automatically restarted.
From that moment, it does not start anymore and it's stuck on the loading screen (samsun logo etc).
I can enter the download mode, so i've tried to flash the original firmware (G530FZXXS1BPL1_G530FZITV1BPF1_G530FZXXU1BPI1_HOME.tar...one binary) with Odin with no luck, obtaining the following error
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I've then tried to download another firmware (G530FZXXU1ANL7_OXX1ANL4_v4.4.4_Repair_Firmware with BL+AP+CP+CSC+PIT) ...no luck again
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried also with different Odin's versions
Any idea on what might have happened and whether or not there is a way to fix it?
Thanks
Anybody?
Related
Alright, so I'm currently having some issues after attempting to install Sungsonic's latest ROM (V-7) and I'm stuck in a bootloop as well as CWM etc isn't working. I do however have access to the Odin Downloader (Standard Recovery?) yet flashing any type of recovery won't work.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.02.1-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Here's the log for when I attempted to get Philz running.
So summed up, Volume Down, home and power works and puts me into the Downloading mode but Volume up, home and power does nothing and will only show the N7100 logo briefly before restarting and doing the same thing. Anyone got an idea of what I can do next?
Hey all. Recently i tried to flash stock android to my i545 and it soft bricked on me. I've tried odin numerous times, every version of it I could find, with many different mirrors on the .tar. I've also tried using .pit to no avail. My odin log is as follows for each attempt:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I've also tried kies with no luck due to it never freaking recognizing the device, and yes ive updated the drivers. Ive done all these steps with many different usb's, usb ports, computers, and versions of odin. Is there anything i can do or should i just start looking for a new phone? Help would be greatly appreciated
Make sure that you are flashing the correct Odin for the bootloader you are on download Samsung info and post baseband and bootloader and can point you in the right direction
Hello,
I recently decided to pull the custom rom my SM-T210R was running and go back into the latest stock image (T210RUEU0COB1_T210RXAC0COB1_XAC). For what ever reason it failed like this:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210RUEU0COB1_T210RXAC0COB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> PBL.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> loke_2nd.bin
<ID:0/006> loke_pxa988.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> __XmitData_Write
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My SM-T210R shows:
ODIN MODE
Product Name: SM-T210R
Current Binary: Samsung Official
System Status: Custom
HW Rev: 0x5
Firmware upgrade encounter an issue. Please select recovery mode in Kies & try again.
Any ideas?
Thanks,
--CP
Ok...I think it was the ROM.
I tried T210RUEU0COB1_T210RXAR0COB1_XAR and it worked. Perhaps the XAR vs XAC thing, though this is from Canada.
CrazyPhil said:
Hello,
I recently decided to pull the custom rom my SM-T210R was running and go back into the latest stock image (T210RUEU0COB1_T210RXAC0COB1_XAC). For what ever reason it failed like this:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210RUEU0COB1_T210RXAC0COB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> PBL.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> loke_2nd.bin
<ID:0/006> loke_pxa988.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> __XmitData_Write
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My SM-T210R shows:
ODIN MODE
Product Name: SM-T210R
Current Binary: Samsung Official
System Status: Custom
HW Rev: 0x5
Firmware upgrade encounter an issue. Please select recovery mode in Kies & try again.
Any ideas?
Thanks,
--CP
Click to expand...
Click to collapse
Hello, my friend briked her N7100. She says it went out of battery, and since then she could not turn it on anymore.
I tried to recover it with Kies, but it says the device wasn't recognized, and asks to reboot and try again, no matter what I do, it wont recognize it. I downloaded the firmware from SamMobile, and tried with Odin, but no success too. I get these errors:
Without PIT file:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
When I try with PIT_N7100_16GB_20121102.pit, it logs:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried ODIN-KashaMalagaTOUCHCWMRecovery-V6.0.3.0 too:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
How it looks when turned up on any other option than download mode:
imgur.com / b63BPxL
Is there any way to unbrick it?
Ok, it suffered from SDS... Is there any way to recover from that?
replace chip
I just got this AT&T version of the Note 8 from a buddy, and am having a hard time flashing to CM13 6.0.1 with Odin 3.10.7. I have it rooted, but every time I try to flash the I467M_BNF5_BNF5.tar.md5 file, it fails. This is what I am getting:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> tz.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I feel like I am forgetting to do something trivial, so any help would be much appreciated
That has a locked bootloader. There is no custom recovery for that model. So roms are a no go on the ATT version.
Ah damn. I don't even want the phone part of it. I was trying to speed it up a little bit and get some customization options. I guess I can't be too angry because I only paid $75 for it and he had some pictures of his ex leftover on there. Thanks man