Hi all
A friend of mine has a Note 8.0 3G (n5100) and in the process of rooting and installing a custom ROM he somehow found himself unable to flash a 5100 ROM via CWM. He then tried a 5110 ROM and it worked, but he's now basically got a WiFi tablet because he's lost all phone/3G functionality.
I haven't been able to look at his device because I'm overseas, but I suspect he needs to get right back to basics and flash a new bootloader, kernel and ROM via ODIN (he can't flash any 5100 kernel/ROM via CWM).
Is my diagnosis correct, and if so can someone point me in the direction of a set of ODIN-flashable files that will undo his mess-up? I don't have a Note myself so I don't have a repository of files for one...
Thanks!
Anyone able to point me in the right direction?
Depends on what he flashed. If he flashed a kit kat rom, he will have to stay with a kit kat rom. KK have locked bootloaders, once flashed there's no going back to JB.
Odin needs a .tar file , while cwm needs a zip. This could be part of the problem. Wrong file format.
Sent from my GT-N5100 using XDA Free mobile app
Deep Nox said:
Depends on what he flashed. If he flashed a kit kat rom, he will have to stay with a kit kat rom. KK have locked bootloaders, once flashed there's no going back to JB. Odin needs a .tar file , while cwm needs a zip. This could be part of the problem. Wrong file format.
Click to expand...
Click to collapse
He doesn't mind whether he ends up with KK/KB/LP, it's more about trying to get his phone to think it's an N5100 again - at present it thinks it's a 5110 so it's lost phone/3G functionality. So I'm really just trying to work out what order I need to flash things in to restore normal functionality...
Related
As you'll soon discover, I'm a noob. I stupidly took the OTA update on my Samsung Galaxy S3 T-Mobile T999 from 4.1.2 to 4.3. Since doing so mine and my wife's phone (did the same thing to her also) gets in a mess after being connected to the car stereo bluetooth and prevents outgoing calls unless the phone is rebooted.
So to try to solve this, I rooted the phone and installed CM 11, so now I'm on 4.4.2. This didn't help the issue either and instead is worse at connecting to the bluetooth.
I want to get my phone back to the stock 4.1.2 rom, which I got from sammobile (PDA T999UVDMD5) or at worst back to the 4.3 stock rom (PDA T999UVUEMJC).
This morning I tried to flash T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar using ODIN 307 but it failed almost instantly with an Fail! Auth message.
I also tried to flash CM 10.1 zip on my SD card using ClockworkMod Recovery v 6.0.4.5 but again it failed almost instantly (sorry I didn't take note of the error).
So now I'm back to CM 11. So any suggestions for how to get back to either of the stock roms?
huz666 said:
As you'll soon discover, I'm a noob. I stupidly took the OTA update on my Samsung Galaxy S3 T-Mobile T999 from 4.1.2 to 4.3. Since doing so mine and my wife's phone (did the same thing to her also) gets in a mess after being connected to the car stereo bluetooth and prevents outgoing calls unless the phone is rebooted.
So to try to solve this, I rooted the phone and installed CM 11, so now I'm on 4.4.2. This didn't help the issue either and instead is worse at connecting to the bluetooth.
I want to get my phone back to the stock 4.1.2 rom, which I got from sammobile (PDA T999UVDMD5) or at worst back to the 4.3 stock rom (PDA T999UVUEMJC).
This morning I tried to flash T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar using ODIN 307 but it failed almost instantly with an Fail! Auth message.
I also tried to flash CM 10.1 zip on my SD card using ClockworkMod Recovery v 6.0.4.5 but again it failed almost instantly (sorry I didn't take note of the error).
So now I'm back to CM 11. So any suggestions for how to get back to either of the stock roms?
Click to expand...
Click to collapse
If you are getting errors in both odin and cwm, it sounds like it is a root issue. In other words, it sounds like the apps are being denied access to root and therefor cannot flash. Both odin and cwm are able to generate logs so you can tell the reason for the fail. Personally, I would recommend flasing twrp recovery instead of cwm since it seems to simplify alot and is a little better for our device. Without knowing exactly why the flash is failing, i would just recommend to try and re-root the phone again.
Did you put the phone in Downloading mode before connecting to the Odin ?
Do not try to flash 4.1.2 ever. It will brick your phone.
Perseus71 said:
Did you put the phone in Downloading mode before connecting to the Odin ?
Do not try to flash 4.1.2 ever. It will brick your phone.
Click to expand...
Click to collapse
Yes the phone was in downloading mode. I couldn't find any posts that thought that I would brick my phone for sure by downgrading so I thought I would try. Could I go back to the 4.3 Stock ROM with some degree of confidence?
Yes you can go back to 4.3 Stock.
Perseus71 said:
Yes you can go back to 4.3 Stock.
Click to expand...
Click to collapse
So I'm now back to Stock 4.3 by doing a flash via Odin. I did (stupidly) try to then go back to 4.1.2 again using Odin having put the phone in USB debugging mode first but I still got the same Auth Fail error.
Thanks for all the help.
huz666 said:
So I'm now back to Stock 4.3 by doing a flash via Odin. I did (stupidly) try to then go back to 4.1.2 again using Odin having put the phone in USB debugging mode first but I still got the same Auth Fail error.
Thanks for all the help.
Click to expand...
Click to collapse
You cannot downgrade like that once you have updated to official 4.3 firmware, no offence but why would you try it even after Perseus said not to? Anyway if you want to go back to 4.1.2 so badly just download a 4.1.2 ROM and flash it in recovery
Sent from my SGH-M919 using Tapatalk
serio22 said:
You cannot downgrade like that once you have updated to official 4.3 firmware, no offence but why would you try it even after Perseus said not to? Anyway if you want to go back to 4.1.2 so badly just download a 4.1.2 ROM and flash it in recovery
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
.
Thanks for the advice. I think I'll just quit while I'm only slightly behind now and remain on 4.3 Stock. I appreciate everyone's help and suggestions.
Downgrade from CM11 4.4.2 to 4.3 on I747
I went from 4.3 stock to CM11 on my i747 but i didnt like the update. So i am trying to go back to 4.3 however whenever i try to install the 4.3 zip file thru twrp or CWM, it fails. As far as i know there is no odin file for going back. I tried to flash rogers 4.3 file through odin (thinking i would flash at&t modem later) but that also failed.
I would appreciate any help on how to install 4.3 once 4.4.2 has been installed on an i747
You seriously need to do some reading
Sent from my SGH-T999 using Tapatalk
nitagro said:
I went from 4.3 stock to CM11 on my i747 but i didnt like the update. So i am trying to go back to 4.3 however whenever i try to install the 4.3 zip file thru twrp or CWM, it fails. As far as i know there is no odin file for going back. I tried to flash rogers 4.3 file through odin (thinking i would flash at&t modem later) but that also failed.
I would appreciate any help on how to install 4.3 once 4.4.2 has been installed on an i747
Click to expand...
Click to collapse
For One, you are on the wrong forum. This is for T-Mobile's S3 not AT&T. Second, Like @passtheknowledge said, you really need to do significant research and reading here on XDA.
Perseus71 said:
For One, you are on the wrong forum. This is for T-Mobile's S3 not AT&T. Second, Like @passtheknowledge said, you really need to do significant research and reading here on XDA.
Click to expand...
Click to collapse
I was up all night reading and trying all the suggestions that have been posted so far. Nothing worked. I would appreciate if someone can throw some light on what might be wrong.
nitagro said:
I was up all night reading and trying all the suggestions that have been posted so far. Nothing worked. I would appreciate if someone can throw some light on what might be wrong.
Click to expand...
Click to collapse
Please Read through this Thread. For Future Reference, all Odin Files for S3 in general are looked up by unique Keyword Root66. That thread is the right place for you to post errors or issues. If there's no 4.3 image for your phone there, you can post a request as well.
For your immediate Problem, there is a an alternate ATT StockMod Rom by @saranhai Please see this thread. Pay particular attention to the mandatory requirement of flashing a particular modem beforehand.
Hello, I am currently rooted and have CWM 6.0.4.3. installed. I'm on CM11 but want to go back to stock.. Is there an easy way to keep root and go back to stock. Want stock for a few functions that ROMS dont seem to be offering but can keep root and CWM ??
Thanks.
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
DeathNotice said:
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
Click to expand...
Click to collapse
Ok perfect, thats what I was looking for. Phone btw is S3 - d2att - SGH i747) Sounds good to install the stock rom and re-root.. I'm sure its here but I have searched everywhere to find a tutorial on this and I cannot find a straight answer.
Would you mind giving me the steps or pointing me to a thread that explains how to and has the files in need to download ?
audit13 said:
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Click to expand...
Click to collapse
Do you know if there is a step by step on this somewhere ? I dont mind going back to complete stock.. I can just re-root and flash CWM after.
OR
Maybe you could just answer the bigger question : the reason I want to go back to stock is I need to use MHL/HDMI which CM11 doesnt support. I dont want to go back to stock, I would rather even go to another ROM that supports mhl/hdmi.. but if I have to go to stock, than so be it.?
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
audit13 said:
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
Click to expand...
Click to collapse
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
robberrobbie said:
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
Click to expand...
Click to collapse
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
audit13 said:
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
Click to expand...
Click to collapse
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
robberrobbie said:
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
Click to expand...
Click to collapse
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
audit13 said:
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
Click to expand...
Click to collapse
Ok thanks, I will do that. 1 thing I'm not quite sure of is the bootloader situation ? In the first tutorial there is a note : Flashing a prior bootloader can hard/soft brick your device. How do I know ?
I see the steps as:
Extract tar file you downloaded.
Use Odin, put phone into download mode [with phone off, hold vol. down + home + power ], connect to computer and open Odin.
once in odin click the PDA field and select the tar file
Leave Auto Reboot and F. Reset Time checked.
click start and when done let phone reboot.
If you just want a stock, rooted phone with no custom recovery, no plans to flash custom roms, etc. then you can stop HERE.
For my situation, is it just that easy ?
Before flashing, verify the version of your bootloader.
audit13 said:
Before flashing, verify the version of your bootloader.
Click to expand...
Click to collapse
OK I have made an effort to go read and figure out how to find out what version of bootloader on my own.. But i cannot find ? Any chance you know... And could help?
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Hey. I got the i747m. As for what was the last stock ROM I had, can't say. I know when I bought the phone it was ICS and I had received and update to jellybean.. But them went to cm10. The tutorial I followed told me had me back everything up, which I did. Have it in a file somewhere on my comp, would that tell me ?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Ariesdroid said:
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have not seen a stock mf1 ROM that can be flashed in CWM. You could use mobile Odin to flash back to stock and then flash Philz Touch via desktop Odin later.
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
audit13 said:
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Click to expand...
Click to collapse
Hey there Audit, Sorry to bother you again, I just dont know how to move forward from here and neeeeeed some help.
I have been reading for days and days have not found a straight answer for my issue and I dont want to just go ahead and start flashing when I dont know if its the right method ?
I dont know how to get back to stock from where I'm at, I dont know how to figure out what bootloader I have (you asked me)
I have found a couple links on XDA that I can follow, I'm just not sure if they apply to my situation ?
This is a pretty detailed response/tutorial, but I dont know if I can just go ahead with this or not ?
http://forum.xda-developers.com/showthread.php?t=2186967
This is also very detailed: http://forum.xda-developers.com/showthread.php?t=1739426
Any help would be greatly appreciated !
robberrobbie said:
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
Click to expand...
Click to collapse
If you are sure you have the Rogers i747m and you have never loaded a stock Rogers 4.3 ROM onto your phone, you could use desktop Odin to flash a pre-rooted 4.1.2 ROM from here: http://forum.xda-developers.com/showthread.php?t=1739426.
Flashing the pre-rooted 4.1.2 ROM will return the phone to completely stock, wipe out all installed apps and data, and you will have root. I do not recommend flashing the Rogers 4.3 pre-rooted ROM from the link.
Once you are able to boot into the phone and set things up, you can flash Philz Touch from Odin which will give you a custom recovery on a rooted stock 4.1.2 ROM.
Before I get to the point let me explain what happened. I attempted to root my S3. It did work up until I got to the point where I was ready to flash a ROM and it didn't work. I received the "status 7" error on CWM and I receive an error on TWRP that means the same thing. So what I did since I couldn't restore from a backup that I would get bootloops from, I attempted to install a ROM that was .tar or md5.tar through ODIN which only worked for original firmware (given in the screenshot). I have managed to install this ROM on my phone through TWRP but unfortunately it is for TMobile and somehow my AT&T service works on it. Here is a screenshot of the phone. I have tried flashing "aokp_task650_d2lte_kitkat_6.3.2014" that is made for the AT&T S3 but no matter what I try to flash it will not flash. I have already tried doing the "ASSERTS" method but it did not work. Can someone please help me fix this issue??? :/
dreammaster252 said:
Before I get to the point let me explain what happened. I attempted to root my S3. It did work up until I got to the point where I was ready to flash a ROM and it didn't work. I received the "status 7" error on CWM and I receive an error on TWRP that means the same thing. So what I did since I couldn't restore from a backup that I would get bootloops from, I attempted to install a ROM that was .tar or md5.tar through ODIN which only worked for original firmware (given in the screenshot). I have managed to install this ROM on my phone through TWRP but unfortunately it is for TMobile and somehow my AT&T service works on it. Here is a screenshot of the phone. I have tried flashing "aokp_task650_d2lte_kitkat_6.3.2014" that is made for the AT&T S3 but no matter what I try to flash it will not flash. I have already tried doing the "ASSERTS" method but it did not work. Can someone please help me fix this issue??? :/
Click to expand...
Click to collapse
The hybrid firmware thing shouldn't really happen but for some reason, cross flashing between T999 (T-Mobile) & i747 (AT&T) sometimes happens without necessarily causing a brick. I would suggest you do a complete stock restore to AT&T 4.3JB firmware (UCUEMJB). Thereafter, you can go back to flashing your preferred custom ROM. Since you appear to be able to get to TWRP, you can first, from custom recovery, remove all existing firmware including OS and then reinstall the stock firmware. It appears the bootloader is still UCUEMJB so flashing AT&T stock firmware shouldn't be a problem. Please see the thread below for 4.3 stock restore...
http://forum.xda-developers.com/showthread.php?t=2658486
Larry2999 said:
The hybrid firmware thing shouldn't really happen but for some reason, cross flashing between T999 (T-Mobile) & i747 (AT&T) sometimes happens without necessarily causing a brick. I would suggest you do a complete stock restore to AT&T 4.3JB firmware (UCUEMJB). Thereafter, you can go back to flashing your preferred custom ROM. Since you appear to be able to get to TWRP, you can first, from custom recovery, remove all existing firmware including OS and then reinstall the stock firmware. It appears the bootloader is still UCUEMJB so flashing AT&T stock firmware shouldn't be a problem. Please see the thread below for 4.3 stock restore...
http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
So in this case, I just flash everything that it gives me correct? Is the stock ROM still rooted? If it is not then what rooting process do you suggest I go through? If it is a rooted ROM. Then do you recommend I unroot it and root it again or take some other alternative method? I really appreciate your help
dreammaster252 said:
So in this case, I just flash everything that it gives me correct? Is the stock ROM still rooted? If it is not then what rooting process do you suggest I go through? If it is a rooted ROM. Then do you recommend I unroot it and root it again or take some other alternative method? I really appreciate your help
Click to expand...
Click to collapse
It's a complete stock image which will take you to as near factory condition as you can get. This means it is unrooted. You would need to re-root after (successful) firmware installation. Prior to flashing the firmware, please remember to use custom recovery to remove all existing firmware including OS. Once you've restored the firmware, there are several ways to root but my preferred method is SafeRoot. You can find the download links and instructions to SafeRoot in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2565758
You can also try Option 2 in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2538991
Larry2999 said:
It's a complete stock image which will take you to as near factory condition as you can get. This means it is unrooted. You would need to re-root after (successful) firmware installation. Prior to flashing the firmware, please remember to use custom recovery to remove all existing firmware including OS. Once you've restored the firmware, there are several ways to root but my preferred method is SafeRoot. You can find the download links and instructions to SafeRoot in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2565758
You can also try Option 2 in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2538991
Click to expand...
Click to collapse
I am running 4.4.2 on my S3 (AOKP Task650) but unfortunately I am receiving some battery drain. Is there a Kernel I could use to prevent this and save more battery? Which Kernel do you recommend most? Also I am having issues with my Data. I get "E" for edge in a 4G LTE area? Is there a radio that I can flash or APN for this to fix that problem?
dreammaster252 said:
I am running 4.4.2 on my S3 (AOKP Task650) but unfortunately I am receiving some battery drain. Is there a Kernel I could use to prevent this and save more battery? Which Kernel do you recommend most? Also I am having issues with my Data. I get "E" for edge in a 4G LTE area? Is there a radio that I can flash or APN for this to fix that problem?
Click to expand...
Click to collapse
just to confirm, you re on ucuemjb bootloader, and installed/running Task650 4.4.4 rom 7.21.2014 (at this writing thats the latest update for the rom)
right?
sorry last time i tried to flash task650 rom, i got errors concerning the bootloader, went back to CM11 which has been my go-to-go rom and everything works fine, after you respond i will flash and get back to you on the network issues
thanks
I have an s3, it's broken from what i can tell, it sometimes rings someties outs out calls but it's not fuctioing correcyl. It was completely stock.
Its a rogers i7147m on 4.42 I factory rest it, still not working properly so I tried to use old FW only to realize after i soft bricked it the knox must have locked the bootloader.
I install a Verizon rom (the only one that seemed to work in Odin) and it booted without wifi, I then reinstalled an AT&T FW for specifically for teh i747m and it booted no WIFI I then installed a rooted Rogers i747m via CWR and it wouldn't boot I then tried the rooted FW with Knox and it worked BUT no WIFI, I would at least liek to get wifi on this and use it as a mini tablet,
now I want to try to revert it to a non rooted Rogers to get it all back to normal, the only way i can get a rom into this is via CWM odim fails on boot and all the roms I download are in zip and within them an MD5 which CWM doesn't let me install.
Anytips? I have the stock rom ready to go but it's in odin format
What can i do? And is the wifi issue a kernal issue? how can i at least resolve the wifi problem.
Thanks
Nambi_ said:
I have an s3, it's broken from what i can tell, it sometimes rings someties outs out calls but it's not fuctioing correcyl. It was completely stock.
Its a rogers i7147m on 4.42 I factory rest it, still not working properly so I tried to use old FW only to realize after i soft bricked it the knox must have locked the bootloader.
I install a Verizon rom (the only one that seemed to work in Odin) and it booted without wifi, I then reinstalled an AT&T FW for specifically for teh i747m and it booted no WIFI I then installed a rooted Rogers i747m via CWR and it wouldn't boot I then tried the rooted FW with Knox and it worked BUT no WIFI, I would at least liek to get wifi on this and use it as a mini tablet,
now I want to try to revert it to a non rooted Rogers to get it all back to normal, the only way i can get a rom into this is via CWM odim fails on boot and all the roms I download are in zip and within them an MD5 which CWM doesn't let me install.
Anytips? I have the stock rom ready to go but it's in odin format
What can i do? And is the wifi issue a kernal issue? how can i at least resolve the wifi problem.
Thanks
Click to expand...
Click to collapse
Although this area is for the i9300 s3 I would think installing a Verizon rom on a at&t phone is the cause of all your issues I would think.
Sounds like the efs may be corrupt. Either was this is the wrong section for you. Flashing anything here will brick it.
I will ask a mod to move it.
Also you need a rom zip to flash through CWM
Darke5tShad0w said:
Although this area is for the i9300 s3 I would think installing a Verizon rom on a at&t phone is the cause of all your issues I would think.
Sounds like the efs may be corrupt. Either was this is the wrong section for you. Flashing anything here will brick it.
I will ask a mod to move it.
Also you need a rom zip to flash through CWM
Click to expand...
Click to collapse
Rogers SGH-i747 is nearly identical to AT&T's SGH-i747 - as a matter of fact, I believe they can still use each others' ROMs.
So this is the right spot for it to be.
Look for a d2lte common CWM or a d2att version and you should be okay.
garwynn said:
Rogers SGH-i747 is nearly identical to AT&T's SGH-i747 - as a matter of fact, I believe they can still use each others' ROMs.
So this is the right spot for it to be.
Look for a d2lte common CWM or a d2att version and you should be okay.
Click to expand...
Click to collapse
I am an international user lol so I have no knowledge of US phones lol but good to know.
Hi everyone I hope this is not a repetition of some old thread (I tried but couldn't find though).
I was using my note 2 (T889) on stock 4.3 which i previously flashed via odine. A couple of days ago i came by this good looking kitkat based rom ( eZKAT v2.0 ) and went on to try it. the rom flashed flawlessly and after flashing my modem i got the signals as well but the wifi was not working. tried using dr. ketans wifi patch but didnt get the wifi to working. Anyhow, I decided to go back to 4.3 via odine. The odine flashing completed successfully but i got stuck on T-mobiles boot screen for hours.
Is there anything called "you cant go back to 4.3 from 4.4.2"? If yes, then whats the way around? I really need to go back to the stock.
Thanks.
zetrixNoob said:
Hi everyone I hope this is not a repetition of some old thread (I tried but couldn't find though).
I was using my note 2 (T889) on stock 4.3 which i previously flashed via odine. A couple of days ago i came by this good looking kitkat based rom ( eZKAT v2.0 ) and went on to try it. the rom flashed flawlessly and after flashing my modem i got the signals as well but the wifi was not working. tried using dr. ketans wifi patch but didnt get the wifi to working. Anyhow, I decided to go back to 4.3 via odine. The odine flashing completed successfully but i got stuck on T-mobiles boot screen for hours.
Is there anything called "you cant go back to 4.3 from 4.4.2"? If yes, then whats the way around? I really need to go back to the stock.
Thanks.
Click to expand...
Click to collapse
I had this problem on my Note also. Downgrading versions of Android requires a data wipe. You will need to reflash your 4.4 ROM then backup your data if you want. Save your backup to your computer then install the 4.3 image.
Sent from my Nexus 7
EverDawn4 said:
I had this problem on my Note also. Downgrading versions of Android requires a data wipe. You will need to reflash your 4.4 ROM then backup your data if you want. Save your backup to your computer then install the 4.3 image.
Sent from my Nexus 7
Click to expand...
Click to collapse
I already tried that but still the booting stuck on the t-mobile logo. I read somewhere that locked bootloader don't let you downgrade to previous version. Is this true?
In that case. Try finding a 4.3 rom that's close to stock.
Sent from my Nexus 7
The locked bootloader is always in stock firmwares i.e 4.3 for the Note 2 but not in custom roms meaning u can even install Lollipop custom on it & downgrade smoothly, i have done that many times. The problem is 4.3 stock firmware has locked bootloader hence downgrading still keeps u in 4.3 bootloader even if u remove all the KNOX files.
Stuck trying to downgrade from custom 5.1.1 to stock 4.3
Hi, i have a problem like this, upgrade to a custom 5.1.1 and then sell the phone, the new owner wants to have it stock, i try to downgrade to 4.3 but i cant, in odin i set the phone to flash it but seems like it doesn`t recognize the phone and i dont know why, so, i decided to try in recovery mode installing from the sd card but the sistem abort, so, i don`t know what to do, i`ll appreciates any help, sorry for my english, i do my best. (i have root access before upgrated to 5.1.1).