I have an s3, it's broken from what i can tell, it sometimes rings someties outs out calls but it's not fuctioing correcyl. It was completely stock.
Its a rogers i7147m on 4.42 I factory rest it, still not working properly so I tried to use old FW only to realize after i soft bricked it the knox must have locked the bootloader.
I install a Verizon rom (the only one that seemed to work in Odin) and it booted without wifi, I then reinstalled an AT&T FW for specifically for teh i747m and it booted no WIFI I then installed a rooted Rogers i747m via CWR and it wouldn't boot I then tried the rooted FW with Knox and it worked BUT no WIFI, I would at least liek to get wifi on this and use it as a mini tablet,
now I want to try to revert it to a non rooted Rogers to get it all back to normal, the only way i can get a rom into this is via CWM odim fails on boot and all the roms I download are in zip and within them an MD5 which CWM doesn't let me install.
Anytips? I have the stock rom ready to go but it's in odin format
What can i do? And is the wifi issue a kernal issue? how can i at least resolve the wifi problem.
Thanks
Nambi_ said:
I have an s3, it's broken from what i can tell, it sometimes rings someties outs out calls but it's not fuctioing correcyl. It was completely stock.
Its a rogers i7147m on 4.42 I factory rest it, still not working properly so I tried to use old FW only to realize after i soft bricked it the knox must have locked the bootloader.
I install a Verizon rom (the only one that seemed to work in Odin) and it booted without wifi, I then reinstalled an AT&T FW for specifically for teh i747m and it booted no WIFI I then installed a rooted Rogers i747m via CWR and it wouldn't boot I then tried the rooted FW with Knox and it worked BUT no WIFI, I would at least liek to get wifi on this and use it as a mini tablet,
now I want to try to revert it to a non rooted Rogers to get it all back to normal, the only way i can get a rom into this is via CWM odim fails on boot and all the roms I download are in zip and within them an MD5 which CWM doesn't let me install.
Anytips? I have the stock rom ready to go but it's in odin format
What can i do? And is the wifi issue a kernal issue? how can i at least resolve the wifi problem.
Thanks
Click to expand...
Click to collapse
Although this area is for the i9300 s3 I would think installing a Verizon rom on a at&t phone is the cause of all your issues I would think.
Sounds like the efs may be corrupt. Either was this is the wrong section for you. Flashing anything here will brick it.
I will ask a mod to move it.
Also you need a rom zip to flash through CWM
Darke5tShad0w said:
Although this area is for the i9300 s3 I would think installing a Verizon rom on a at&t phone is the cause of all your issues I would think.
Sounds like the efs may be corrupt. Either was this is the wrong section for you. Flashing anything here will brick it.
I will ask a mod to move it.
Also you need a rom zip to flash through CWM
Click to expand...
Click to collapse
Rogers SGH-i747 is nearly identical to AT&T's SGH-i747 - as a matter of fact, I believe they can still use each others' ROMs.
So this is the right spot for it to be.
Look for a d2lte common CWM or a d2att version and you should be okay.
garwynn said:
Rogers SGH-i747 is nearly identical to AT&T's SGH-i747 - as a matter of fact, I believe they can still use each others' ROMs.
So this is the right spot for it to be.
Look for a d2lte common CWM or a d2att version and you should be okay.
Click to expand...
Click to collapse
I am an international user lol so I have no knowledge of US phones lol but good to know.
Related
Well I've been reading about rooting and installing roms on the galaxy note 2 for about 2 weeks now. However, I have the t889v wind mobile variant. which as I have read has a lot of problems attached to it. I don't understand why or how but all I know is that its there. The rooting process as someone explained it to me doesn't seem hard and too different from the t889 version.
But the problems arise in that you install a rom and you run the chance of losing your imei. you have to flash a modem which i hear gives some phones bootloop problems and some not. I also read that the roms have a problem running on the t899v.
Well i guess my question is that, is this a problem that occurs on every t889v or is it just some. If it is only some than what did you guys do wrong? and what are the steps to fix it. Because I really wan't multi-window feature and I don't know how long it will take Wind mobile to push out their updates I'm assuming close to never lol. Therefore I'm more reliant on Roms and rooting but I don't wan't it to the expense of rendering my phone useless.
MCRHAZ said:
Well I've been reading about rooting and installing roms on the galaxy note 2 for about 2 weeks now. However, I have the t889v wind mobile variant. which as I have read has a lot of problems attached to it. I don't understand why or how but all I know is that its there. The rooting process as someone explained it to me doesn't seem hard and too different from the t889 version.
But the problems arise in that you install a rom and you run the chance of losing your imei. you have to flash a modem which i hear gives some phones bootloop problems and some not. I also read that the roms have a problem running on the t899v.
Well i guess my question is that, is this a problem that occurs on every t889v or is it just some. If it is only some than what did you guys do wrong? and what are the steps to fix it. Because I really wan't multi-window feature and I don't know how long it will take Wind mobile to push out their updates I'm assuming close to never lol. Therefore I'm more reliant on Roms and rooting but I don't wan't it to the expense of rendering my phone useless.
Click to expand...
Click to collapse
If you can live with slow data speeds root it, the only thing is you cant go back to stock and NEVER and i mean NEVER flash the T889V modem because youll just screw up your phone
You should be ok with either CWM update zip ROMs or Odin flashable ones that don't include the modem.bin image in their tar file. For those ROMs that do include the modem image, you can repack the ROM to keep only the system and boot.img, (Cygwin's tar binary works well for this.)
As has been said before, flashing modems can get ugly if you make but one mistake.
Darkshado said:
You should be ok with either CWM update zip ROMs or Odin flashable ones that don't include the modem.bin image in their tar file. For those ROMs that do include the modem image, you can repack the ROM to keep only the system and boot.img, (Cygwin's tar binary works well for this.)
As has been said before, flashing modems can get ugly if you make but one mistake.
Click to expand...
Click to collapse
thanks for the replys but, by modem you speak of the t889v modem that has been posted on the developers page that said for canadian users to flash
-and as for data speeds, why do they become slow all of a sudden? and is there any way I can extract the modem from the stock rom on my phone, and then later flash it onto the phone after I flash the custom rom?
MCRHAZ said:
thanks for the replys but, by modem you speak of the t889v modem that has been posted on the developers page that said for canadian users to flash
-and as for data speeds, why do they become slow all of a sudden? and is there any way I can extract the modem from the stock rom on my phone, and then later flash it onto the phone after I flash the custom rom?
Click to expand...
Click to collapse
They become slow because its using the tmobile modem, and if you flash the t899v modem available it will make your phone go into a reboot loop (Happened to two of my note 2), and im not sure if you can get the modem form your stock rom right now
solat said:
They become slow because its using the tmobile modem, and if you flash the t899v modem available it will make your phone go into a reboot loop (Happened to two of my note 2), and im not sure if you can get the modem form your stock rom right now
Click to expand...
Click to collapse
well that's a shame if only there was a way i could just extract my modem and use it...I guess i'll just wait till more brilliant minds fix it. As waiting for wind to update is highly unlikely.
Actually rooting is really easy.
Download the toolkit.
Takes like 2 minutes.
Then you can use some very useful apps like titanium backup / adfree, etc.
Recovery is also useful.
You can use custom roms too. See details here:
http://forum.xda-developers.com/showpost.php?p=35456320&postcount=7
Not too long ago I was on the same boat. I was pissed off when I got my gn2 with wind only to find out there is very little support for it. I read some horrible stories on xda but I can personaly say I didnt lose my imei or bootloop. I used the toolkit to root and then flashed jedi x14. With this particular rom you select the option to retain your modem so you will not be flashing any modems. This is the only rom I am willing to vouch for as I have not tested other ones. Make sure you flash twrp recovery and backup your rom with efs modem and everything before flashing anything. Always wipe before flashing and follow OP. I have not noticed my phone being slower but then again I never bothered checking my speed when my phone was stock either. Good luck
Sent from my SGH-T889 using xda app-developers app
I have had my note 2 for a while and I recommend it.
SGN2. Jedi X14. XDA Premium. Jelly?
solat said:
If you can live with slow data speeds root it, the only thing is you cant go back to stock and NEVER and i mean NEVER flash the T889V modem because youll just screw up your phone
Click to expand...
Click to collapse
Data speeds have nothing to do with rooting and yes you can go back.
CARBON NIGHTLIES. | KROZ BROWN Theme | Crack Flasher
As you'll soon discover, I'm a noob. I stupidly took the OTA update on my Samsung Galaxy S3 T-Mobile T999 from 4.1.2 to 4.3. Since doing so mine and my wife's phone (did the same thing to her also) gets in a mess after being connected to the car stereo bluetooth and prevents outgoing calls unless the phone is rebooted.
So to try to solve this, I rooted the phone and installed CM 11, so now I'm on 4.4.2. This didn't help the issue either and instead is worse at connecting to the bluetooth.
I want to get my phone back to the stock 4.1.2 rom, which I got from sammobile (PDA T999UVDMD5) or at worst back to the 4.3 stock rom (PDA T999UVUEMJC).
This morning I tried to flash T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar using ODIN 307 but it failed almost instantly with an Fail! Auth message.
I also tried to flash CM 10.1 zip on my SD card using ClockworkMod Recovery v 6.0.4.5 but again it failed almost instantly (sorry I didn't take note of the error).
So now I'm back to CM 11. So any suggestions for how to get back to either of the stock roms?
huz666 said:
As you'll soon discover, I'm a noob. I stupidly took the OTA update on my Samsung Galaxy S3 T-Mobile T999 from 4.1.2 to 4.3. Since doing so mine and my wife's phone (did the same thing to her also) gets in a mess after being connected to the car stereo bluetooth and prevents outgoing calls unless the phone is rebooted.
So to try to solve this, I rooted the phone and installed CM 11, so now I'm on 4.4.2. This didn't help the issue either and instead is worse at connecting to the bluetooth.
I want to get my phone back to the stock 4.1.2 rom, which I got from sammobile (PDA T999UVDMD5) or at worst back to the 4.3 stock rom (PDA T999UVUEMJC).
This morning I tried to flash T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar using ODIN 307 but it failed almost instantly with an Fail! Auth message.
I also tried to flash CM 10.1 zip on my SD card using ClockworkMod Recovery v 6.0.4.5 but again it failed almost instantly (sorry I didn't take note of the error).
So now I'm back to CM 11. So any suggestions for how to get back to either of the stock roms?
Click to expand...
Click to collapse
If you are getting errors in both odin and cwm, it sounds like it is a root issue. In other words, it sounds like the apps are being denied access to root and therefor cannot flash. Both odin and cwm are able to generate logs so you can tell the reason for the fail. Personally, I would recommend flasing twrp recovery instead of cwm since it seems to simplify alot and is a little better for our device. Without knowing exactly why the flash is failing, i would just recommend to try and re-root the phone again.
Did you put the phone in Downloading mode before connecting to the Odin ?
Do not try to flash 4.1.2 ever. It will brick your phone.
Perseus71 said:
Did you put the phone in Downloading mode before connecting to the Odin ?
Do not try to flash 4.1.2 ever. It will brick your phone.
Click to expand...
Click to collapse
Yes the phone was in downloading mode. I couldn't find any posts that thought that I would brick my phone for sure by downgrading so I thought I would try. Could I go back to the 4.3 Stock ROM with some degree of confidence?
Yes you can go back to 4.3 Stock.
Perseus71 said:
Yes you can go back to 4.3 Stock.
Click to expand...
Click to collapse
So I'm now back to Stock 4.3 by doing a flash via Odin. I did (stupidly) try to then go back to 4.1.2 again using Odin having put the phone in USB debugging mode first but I still got the same Auth Fail error.
Thanks for all the help.
huz666 said:
So I'm now back to Stock 4.3 by doing a flash via Odin. I did (stupidly) try to then go back to 4.1.2 again using Odin having put the phone in USB debugging mode first but I still got the same Auth Fail error.
Thanks for all the help.
Click to expand...
Click to collapse
You cannot downgrade like that once you have updated to official 4.3 firmware, no offence but why would you try it even after Perseus said not to? Anyway if you want to go back to 4.1.2 so badly just download a 4.1.2 ROM and flash it in recovery
Sent from my SGH-M919 using Tapatalk
serio22 said:
You cannot downgrade like that once you have updated to official 4.3 firmware, no offence but why would you try it even after Perseus said not to? Anyway if you want to go back to 4.1.2 so badly just download a 4.1.2 ROM and flash it in recovery
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
.
Thanks for the advice. I think I'll just quit while I'm only slightly behind now and remain on 4.3 Stock. I appreciate everyone's help and suggestions.
Downgrade from CM11 4.4.2 to 4.3 on I747
I went from 4.3 stock to CM11 on my i747 but i didnt like the update. So i am trying to go back to 4.3 however whenever i try to install the 4.3 zip file thru twrp or CWM, it fails. As far as i know there is no odin file for going back. I tried to flash rogers 4.3 file through odin (thinking i would flash at&t modem later) but that also failed.
I would appreciate any help on how to install 4.3 once 4.4.2 has been installed on an i747
You seriously need to do some reading
Sent from my SGH-T999 using Tapatalk
nitagro said:
I went from 4.3 stock to CM11 on my i747 but i didnt like the update. So i am trying to go back to 4.3 however whenever i try to install the 4.3 zip file thru twrp or CWM, it fails. As far as i know there is no odin file for going back. I tried to flash rogers 4.3 file through odin (thinking i would flash at&t modem later) but that also failed.
I would appreciate any help on how to install 4.3 once 4.4.2 has been installed on an i747
Click to expand...
Click to collapse
For One, you are on the wrong forum. This is for T-Mobile's S3 not AT&T. Second, Like @passtheknowledge said, you really need to do significant research and reading here on XDA.
Perseus71 said:
For One, you are on the wrong forum. This is for T-Mobile's S3 not AT&T. Second, Like @passtheknowledge said, you really need to do significant research and reading here on XDA.
Click to expand...
Click to collapse
I was up all night reading and trying all the suggestions that have been posted so far. Nothing worked. I would appreciate if someone can throw some light on what might be wrong.
nitagro said:
I was up all night reading and trying all the suggestions that have been posted so far. Nothing worked. I would appreciate if someone can throw some light on what might be wrong.
Click to expand...
Click to collapse
Please Read through this Thread. For Future Reference, all Odin Files for S3 in general are looked up by unique Keyword Root66. That thread is the right place for you to post errors or issues. If there's no 4.3 image for your phone there, you can post a request as well.
For your immediate Problem, there is a an alternate ATT StockMod Rom by @saranhai Please see this thread. Pay particular attention to the mandatory requirement of flashing a particular modem beforehand.
I have a wind t889v, I am stuck on stock after taking a 4.3 OTA update, i rooted and flashed the 4.1.1 modem from here http://forum.xda-developers.com/showthread.php?t=2061031 so that i could unlock my phone, but now I am stuck with this old modem since there is no link there for the 4.3 version. Does anyone have a link to the wind t889v 4.3 modem?
EDIT: I am going to try flashing a stock 4.3 wind rom for now, but how can i upload files to my phone? I have installed kies and kies3 but neither seem to detect it, and windows explorer does not show my phones storage. I have had to transfer files through my mega cloud folder in order to get them on my phone, but that is going to be a pain in the ass for a 907mb rom...
And my next question: How do I know what roms are flashable for the t889v after taking that stupid 4.3 update? I found this guide but its for a verizon note 2. I am rooted and I am hoping there is some customized odin flashable firmware for me
nodyarg said:
I have a wind t889v, I am stuck on stock after taking a 4.3 OTA update, i rooted and flashed the 4.1.1 modem from here http://forum.xda-developers.com/showthread.php?t=2061031 so that i could unlock my phone, but now I am stuck with this old modem since there is no link there for the 4.3 version. Does anyone have a link to the wind t889v 4.3 modem?
EDIT: I am going to try flashing a stock 4.3 wind rom for now, but how can i upload files to my phone? I have installed kies and kies3 but neither seem to detect it, and windows explorer does not show my phones storage. I have had to transfer files through my mega cloud folder in order to get them on my phone, but that is going to be a pain in the ass for a 907mb rom...
And my next question: How do I know what roms are flashable for the t889v after taking that stupid 4.3 update? I found this guide but its for a verizon note 2. I am rooted and I am hoping there is some customized odin flashable firmware for me
Click to expand...
Click to collapse
all roms are flashable while on the 4.3 bootloader. you will need to install a custom recovery (CWM, TWRP, etc). here is a link to the modem: http://forum.xda-developers.com/showthread.php?t=2554226 you can flash this in said recovery
mattlowry said:
all roms are flashable while on the 4.3 bootloader. you will need to install a custom recovery (CWM, TWRP, etc). here is a link to the modem: http://forum.xda-developers.com/showthread.php?t=2554226 you can flash this in said recovery
Click to expand...
Click to collapse
Oh alright, I suppose I can give it a shot. But I have been told its not possible to flash anything other than stock factory 4.3, for example here:
Baenwort said:
If your phone has factory 4.3 you can not downgrade to a lower version as the KNOX functionality that is built into the 4.3 bootloader will prevent the flashing of a prior version.
You can still root with stock factory 4.3 but you'll need to either trip the KNOX counter or use one of the more involved methods. Is there a reason you are trying to flash such an early version?
Click to expand...
Click to collapse
I have already rooted with saferoot, can i just flash the recovery and then custom images as normal?
nodyarg said:
Oh alright, I suppose I can give it a shot. But I have been told its not possible to flash anything other than stock factory 4.3, for example here:
I have already rooted with saferoot, can i just flash the recovery and then custom images as normal?
Click to expand...
Click to collapse
what that is referring to is the bootloader. which currently can not be downgraded. install a custom recovery and you can flash rom zips not images. most roms do not have a bootloader in the zip so there will be no conflict
mattlowry said:
what that is referring to is the bootloader. which currently can not be downgraded. install a custom recovery and you can flash rom zips not images. most roms do not have a bootloader in the zip so there will be no conflict
Click to expand...
Click to collapse
thanks you were right, i used the unified android toolkit to install twrp and it worked. so can i just flash any rom for the t889? because i believe i read that only touchwiz roms work. if thats true i havent seen many roms that i can use.
nodyarg said:
thanks you were right, i used the unified android toolkit to install twrp and it worked. so can i just flash any rom for the t889? because i believe i read that only touchwiz roms work. if thats true i havent seen many roms that i can use.
Click to expand...
Click to collapse
N7105, i317, and SGH-T889 ROMs are usually OK. Don't flash another device's modem. There is a whole mess of ROM options out there.
Make certain your APN is correct in other carrier designated ROMs. Don't flash recovery from automated recovery installers as they will not put the correct version in unless you are on a ROM with the correct build prop settings for the SGH-T889 (if your using a Tmo US device).
Hastily spouted for your befuddlement
Coug76 said:
N7105, i317, and SGH-T889 ROMs are usually OK. Don't flash another device's modem. There is a whole mess of ROM options out there.
Make certain your APN is correct in other carrier designated ROMs. Don't flash recovery from automated recovery installers as they will not put the correct version in unless you are on a ROM with the correct build prop settings for the SGH-T889 (if your using a Tmo US device).
Hastily spouted for your befuddlement
Click to expand...
Click to collapse
So I flashed DN3, it was for n7105, its an AROMA installer. I jsut realized that thats what you meant when you said dont flash automated installers. It required that i flash an n7105 modem to complete the installation. Can i fix my build.prop after? How do i flash this rom without using AROMA? aaah
EDIT: I am going to try to flash the wind 4.1.1 t889v over top of this using mobile odin since my modem doesnt work now.
nodyarg said:
So I flashed DN3, it was for n7105, its an AROMA installer. I jsut realized that thats what you meant when you said dont flash automated installers. It required that i flash an n7105 modem to complete the installation. Can i fix my build.prop after? How do i flash this rom without using AROMA? aaah
EDIT: I am going to try to flash the wind 4.1.1 t889v over top of this using mobile odin since my modem doesnt work now.
Click to expand...
Click to collapse
I was more referring to ROM Manager and Goo Manager. ROMs that flash modems are atypical. Usually they leave you with a choice to install one of a couple choices or leave it as is. Sometimes they don't.
You may be able to find the 4.3 modem appropriate to your device around here somewhere. That will work much better than the 4.1.1 if you can get it to stick.
Hastily spouted for your befuddlement
Coug76 said:
I was more referring to ROM Manager and Goo Manager. ROMs that flash modems are atypical. Usually they leave you with a choice to install one of a couple choices or leave it as is. Sometimes they don't.
You may be able to find the 4.3 modem appropriate to your device around here somewhere. That will work much better than the 4.1.1 if you can get it to stick.
Hastily spouted for your befuddlement
Click to expand...
Click to collapse
I flashed the wind 4.1.1 modem with mobile odin but i still have a "no network" icon. ill try to find a 4.3 wind modem and flash that. hopefully i havent bricked my modem, i thought this rom would be cross compatible. damn...
EDIT: I used mattlowry's 4.3 wind modem above, but still "no network" icon (the one that looks like a no smoking sign. not really sure what to do now. i was told this rom would work but i guess not. hopefully if i flash back to a t889v firmware i can get my modem working again....
any advice?
nodyarg said:
I flashed the wind 4.1.1 modem with mobile odin but i still have a "no network" icon. ill try to find a 4.3 wind modem and flash that. hopefully i havent bricked my modem, i thought this rom would be cross compatible. damn...
EDIT: I used mattlowry's 4.3 wind modem above, but still "no network" icon (the one that looks like a no smoking sign. not really sure what to do now. i was told this rom would work but i guess not. hopefully if i flash back to a t889v firmware i can get my modem working again....
any advice?
Click to expand...
Click to collapse
You could mobile Odin the stock image from sammobile or the root66 to flash everything but the bootloader. Kies recovery could maybe work. T889V is stubborn with modems IIRC. Teshx had problems with this very problem quite sometime ago IIRC.
This fits in my "this is a problem" category, backup and save your data.
Hastily spouted for your befuddlement
Coug76 said:
You could mobile Odin the stock image from sammobile or the root66 to flash everything but the bootloader. Kies recovery could maybe work. T889V is stubborn with modems IIRC. Teshx had problems with this very problem quite sometime ago IIRC.
This fits in my "this is a problem" category, backup and save your data.
Hastily spouted for your befuddlement
Click to expand...
Click to collapse
yeah i did some wiping in recovery and managed to soft brick my phone, then using pc odin to flahs a stock image got my phone back to life and showed signal bars again, then i flashed the custom recovery back on. so at least i know i can save my modem when i do this again. i then tried replacing the modem.bin files in the dn3 istall zip with t889v modem.bin files, tried reflashing it with the new modem.bins but it still gives me the no network symbol instead of signal bars.
Before I get to the point let me explain what happened. I attempted to root my S3. It did work up until I got to the point where I was ready to flash a ROM and it didn't work. I received the "status 7" error on CWM and I receive an error on TWRP that means the same thing. So what I did since I couldn't restore from a backup that I would get bootloops from, I attempted to install a ROM that was .tar or md5.tar through ODIN which only worked for original firmware (given in the screenshot). I have managed to install this ROM on my phone through TWRP but unfortunately it is for TMobile and somehow my AT&T service works on it. Here is a screenshot of the phone. I have tried flashing "aokp_task650_d2lte_kitkat_6.3.2014" that is made for the AT&T S3 but no matter what I try to flash it will not flash. I have already tried doing the "ASSERTS" method but it did not work. Can someone please help me fix this issue??? :/
dreammaster252 said:
Before I get to the point let me explain what happened. I attempted to root my S3. It did work up until I got to the point where I was ready to flash a ROM and it didn't work. I received the "status 7" error on CWM and I receive an error on TWRP that means the same thing. So what I did since I couldn't restore from a backup that I would get bootloops from, I attempted to install a ROM that was .tar or md5.tar through ODIN which only worked for original firmware (given in the screenshot). I have managed to install this ROM on my phone through TWRP but unfortunately it is for TMobile and somehow my AT&T service works on it. Here is a screenshot of the phone. I have tried flashing "aokp_task650_d2lte_kitkat_6.3.2014" that is made for the AT&T S3 but no matter what I try to flash it will not flash. I have already tried doing the "ASSERTS" method but it did not work. Can someone please help me fix this issue??? :/
Click to expand...
Click to collapse
The hybrid firmware thing shouldn't really happen but for some reason, cross flashing between T999 (T-Mobile) & i747 (AT&T) sometimes happens without necessarily causing a brick. I would suggest you do a complete stock restore to AT&T 4.3JB firmware (UCUEMJB). Thereafter, you can go back to flashing your preferred custom ROM. Since you appear to be able to get to TWRP, you can first, from custom recovery, remove all existing firmware including OS and then reinstall the stock firmware. It appears the bootloader is still UCUEMJB so flashing AT&T stock firmware shouldn't be a problem. Please see the thread below for 4.3 stock restore...
http://forum.xda-developers.com/showthread.php?t=2658486
Larry2999 said:
The hybrid firmware thing shouldn't really happen but for some reason, cross flashing between T999 (T-Mobile) & i747 (AT&T) sometimes happens without necessarily causing a brick. I would suggest you do a complete stock restore to AT&T 4.3JB firmware (UCUEMJB). Thereafter, you can go back to flashing your preferred custom ROM. Since you appear to be able to get to TWRP, you can first, from custom recovery, remove all existing firmware including OS and then reinstall the stock firmware. It appears the bootloader is still UCUEMJB so flashing AT&T stock firmware shouldn't be a problem. Please see the thread below for 4.3 stock restore...
http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
So in this case, I just flash everything that it gives me correct? Is the stock ROM still rooted? If it is not then what rooting process do you suggest I go through? If it is a rooted ROM. Then do you recommend I unroot it and root it again or take some other alternative method? I really appreciate your help
dreammaster252 said:
So in this case, I just flash everything that it gives me correct? Is the stock ROM still rooted? If it is not then what rooting process do you suggest I go through? If it is a rooted ROM. Then do you recommend I unroot it and root it again or take some other alternative method? I really appreciate your help
Click to expand...
Click to collapse
It's a complete stock image which will take you to as near factory condition as you can get. This means it is unrooted. You would need to re-root after (successful) firmware installation. Prior to flashing the firmware, please remember to use custom recovery to remove all existing firmware including OS. Once you've restored the firmware, there are several ways to root but my preferred method is SafeRoot. You can find the download links and instructions to SafeRoot in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2565758
You can also try Option 2 in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2538991
Larry2999 said:
It's a complete stock image which will take you to as near factory condition as you can get. This means it is unrooted. You would need to re-root after (successful) firmware installation. Prior to flashing the firmware, please remember to use custom recovery to remove all existing firmware including OS. Once you've restored the firmware, there are several ways to root but my preferred method is SafeRoot. You can find the download links and instructions to SafeRoot in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2565758
You can also try Option 2 in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2538991
Click to expand...
Click to collapse
I am running 4.4.2 on my S3 (AOKP Task650) but unfortunately I am receiving some battery drain. Is there a Kernel I could use to prevent this and save more battery? Which Kernel do you recommend most? Also I am having issues with my Data. I get "E" for edge in a 4G LTE area? Is there a radio that I can flash or APN for this to fix that problem?
dreammaster252 said:
I am running 4.4.2 on my S3 (AOKP Task650) but unfortunately I am receiving some battery drain. Is there a Kernel I could use to prevent this and save more battery? Which Kernel do you recommend most? Also I am having issues with my Data. I get "E" for edge in a 4G LTE area? Is there a radio that I can flash or APN for this to fix that problem?
Click to expand...
Click to collapse
just to confirm, you re on ucuemjb bootloader, and installed/running Task650 4.4.4 rom 7.21.2014 (at this writing thats the latest update for the rom)
right?
sorry last time i tried to flash task650 rom, i got errors concerning the bootloader, went back to CM11 which has been my go-to-go rom and everything works fine, after you respond i will flash and get back to you on the network issues
thanks
Ive unrooted my phone via the super user app but I still have the Liquid Smooth ROM. From everything I read I was under the impression it would reboot completely stock
How do get it back to stock ROM!? I have been searching everywhere and nothing?
I want to get my OTA updates as I haven't used this phone since last year. I don't have access to a computer as NY charger bit the dust and I'm working the next 2 weeks in a remote location with no WiFi (I have data though)
Can any on help me, I'm slightly desperate as this Liquid Smooth ROM lags horrible, reboots if I try to use the front camera (in any app!) and is missing a lot of simple stock features like the messaging app lol,
Oy what have I done am I stuck with this or is there a way to reroot without a PC so I can flash a stock ROM?!
I'm assuming you have the i747 from AT&T.
Unrooting simply removes your administrator access to system files and apps that need root access to be fully functional, that's all.
What bootloader is on your phone? If the phone has a 4.1.2 bootloader or lower, the easiest way to get back to stock would be to flash a stock AT&T ROM from sammobile. com using Odin and I recommend living with the phone in its current state until your get access to a PC and charger.
If your bootloader is 4.3 or higher, you cannot flash a stock AT&T ROM using Odin because AT&T naver released a full ROM that can be flashed that way. You'll confirm your bootloader and follow the appropriate thread to get as close to stock as possible.
I keep mentioning the bootloader because flashing the wrong bootloader/modem combination could hard brick your phone.
audit13 said:
I'm assuming you have the i747 from AT&T.
Unrooting simply removes your administrator access to system files and apps that need root access to be fully functional, that's all.
What bootloader is on your phone? If the phone has a 4.1.2 bootloader or lower, the easiest way to get back to stock would be to flash a stock AT&T ROM from sammobile. com using Odin and I recommend living with the phone in its current state until your get access to a PC and charger.
If your bootloader is 4.3 or higher, you cannot flash a stock AT&T ROM using Odin because AT&T naver released a full ROM that can be flashed that way. You'll confirm your bootloader and follow the appropriate thread to get as close to stock as possible.
I keep mentioning the bootloader because flashing the wrong bootloader/modem combination could hard brick your phone.
Click to expand...
Click to collapse
I attached an image does that help as far as boot loader goes? I'm not sure how to check it. I have the I747M on virgin mobile Canada. Att ROMs have usually worked perfectly. So if my boot loader is compatible I can flash a stock ROM with Odin without rerooting?
Since you have an i747m, the safest and easiest way to restore to completely stock would be to wait until you can flash a stock 4.3 ROM via Odin. Do not attempt to flash anything older than 4.3.
Custom AT&T ROMs will work on your i747m but I don't recommend using stock AT&T ROMs on an i747m. Also, do not flash AT&T modems or bootloaders onto an i747m as this will probably brick your phone.
audit13 said:
Since you have an i747m, the safest and easiest way to restore to completely stock would be to wait until you can flash a stock 4.3 ROM via Odin. Do not attempt to flash anything older than 4.3.
Custom AT&T ROMs will work on your i747m but I don't recommend using stock AT&T ROMs on an i747m. Also, do not flash AT&T modems or bootloaders onto an i747m as this will probably brick your phone.
Click to expand...
Click to collapse
Okay that first part sounds simple enough for me.
But what would be a preferable stock ROM to flash if not ATT (assuming you say this because my phone is Virgin Mobile Canada) If I remember correctly I had flashed a ATT stock ROM a long time ago and ended up with no service and security issues that I eventually fixed but were a pain in the arse to figure out. I don't know if I've ever come across a Virgin Mobile ROM. I believe they are a sub company of Bell btw.
Go to sammobile.com and flash any mk5 firmware you want for the i747m. You can choose from Rogers, Bell, and Telus.
I have cross-flashed a Rogers ROM onto a Telus Phone and a Telus ROM onto a Bell phone.
Based on my own experience, all i747m ROMs for Canadian carriers appear to be the same except for carrier customisations.
audit13 said:
Go to sammobile.com and flash any mk5 firmware you want for the i747m. You can choose from Rogers, Bell, and Telus.
I have cross-flashed a Rogers ROM onto a Telus Phone and a Telus ROM onto a Bell phone.
Based on my own experience, all i747m ROMs for Canadian carriers appear to be the same except for carrier customisations.
Click to expand...
Click to collapse
Okay! Perfect this is a lot more straight forward than I anticipated, thank you SO much!!
When flashing the ROM with Odin, uncheck everything except f.reset time. When the flash is complete, you will see the word "reset" in the status window. When you see reset, remove the USB cable, remove the battery, replace the battery, boot into recovery, and wipe cache, data, Dalvik, and reboot.