Develop Bugs

[Q] Flashed the stock rom but it is still showing cm 11 splash screen. . .

So, I'm not a complete noob to flashing roms/rooting devices. I flashed cm 11 to my s3, and decided I wanted to go back to stock via Odin. For some reason when I tried to turn on my device it was still showing the cm 11 splash screen and wouldn't proceed any further. It isn't technically bricked. I guess this would be classified as a boot loop to the nth degree. I tired to boot in recovery mode and wipe the cache partition and all user data to the same cm 11 robot taunting me. When I tried the process (flashing stock vi Odin) again to possibly fix whatever might have been a miss, I got the error message on the download screen "secure check fail: sb12." On the download mode screen it also says I am running the official system rom. I don't know what steps I need to take from here to get my phone to actually boot via the stock rom. Has anybody else had this issue or similar? Any help in resolving this would be greatly appreciated.

Is your phone a i747? If you are you running a stock 4.3 bootloader on your i747, you can't use Odin to flash back to stock unless the ROM was specifically designed to be flashed in Odin.
What is shown on the screen in download mode?

audit13 said:
Is your phone a i747? If you are you running a stock 4.3 bootloader on your i747, you can't use Odin to flash back to stock unless the ROM was specifically designed to be flashed in Odin.
What is shown on the screen in download mode?
Click to expand...
Click to collapse
I was under the impression the rom I was attempting to flash was indeed intended for Odin. It is the SGH-I747.
The download screen states,
Product Name: SGH-I747
Custom Binary: Custom
System Status: Official
Qualcom Secure Boot: Enable
Warranty Bit: 1
Bootloader AP SWERV: 2
Here is an added bit of fun, in the midst of the process I accidentally checked "Nand erase all," in Odin at one point.

Based on the information provided, your phone is running a stock ATT 4.3 bootloader. The CM11 splash screen is still showing up because the flash did not actually happen. You're lucky your phone was not bricked in the process of using Odin. I recommend not using Odin to flash a ROM that tries to alter the bootloader.
I recommend flashing a custom recovery such as Philz Touch in Odin and flashing a different KK ROM such as Valudis.
If you want to get back to stock, try this: http://forum.xda-developers.com/showthread.php?t=2658486

audit13 said:
Based on the information provided, your phone is running a stock ATT 4.3 bootloader. The CM11 splash screen is still showing up because the flash did not actually happen. You're lucky your phone was not bricked in the process of using Odin. I recommend not using Odin to flash a ROM that tries to alter the bootloader.
I recommend flashing a custom recovery such as Philz Touch in Odin and flashing a different KK ROM such as Valudis.
If you want to get back to stock, try this: http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
My next question would be how can I move the zip files I download to the internal storage of my phone to flash them through Philz Touch?

Have you tried using kies?
http://forum.xda-developers.com/showthread.php?t=2088809

sjthuss said:
Have you tried using kies?
http://forum.xda-developers.com/showthread.php?t=2088809
Click to expand...
Click to collapse
I did. It said the the device couldn't be updated, or something to that effect.

Kies will not work without a stock recovery or a rooted phone from my experience.
I would be surprised if kies can restore your phone as ATT never released a full 4.3 stock ROM. ATT only made 4.3 available via an OTA update.

audit13 said:
Kies will not work without a stock recovery or a rooted phone from my experience.
I would be surprised if kies can restore your phone as ATT never released a full 4.3 stock ROM. ATT only made 4.3 available via an OTA update.
Click to expand...
Click to collapse
I don't know about AT&T, but I'm on Telus in Canada and I used kies to revert back to stock 4.3 with CWM recovery and phone rooted, and it worked no problem.

audit13 said:
Based on the information provided, your phone is running a stock ATT 4.3 bootloader. The CM11 splash screen is still showing up because the flash did not actually happen. You're lucky your phone was not bricked in the process of using Odin. I recommend not using Odin to flash a ROM that tries to alter the bootloader.
I recommend flashing a custom recovery such as Philz Touch in Odin and flashing a different KK ROM such as Valudis.
If you want to get back to stock, try this: http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
So, I know there is a "thanks," button but I feel like that would be a little too informal for how much I appreciate your help! I downloaded ADB to move the rom (I went with AOKP because it was the first one that worked) to my phone, flashed it using TWRP and...BAM! We are back in business. Thanks for the direction, I thought I had a nice, new, shiny brick on my hands for about two days.

sjthuss said:
I don't know about AT&T, but I'm on Telus in Canada and I used kies to revert back to stock 4.3 with CWM recovery and phone rooted, and it worked no problem.
Click to expand...
Click to collapse
Canadian carriers use the i747m while att users get the i747.
The Canadian carriers did release a full 4.3 ROM unlike att who did not.

[Q] i317 still on 4.1.2... :( SOLVED!

my work requires encryption. i was on slimkatv22 at the time and had to encrypt. as encryption kept failing, i went back to stock. way back to stock.
so i'm running
JZO54K.I317UCAMH3 ROM
TEAMWIN Recovery
I317UCUCNE5 Bootloader
with Root and Busybox installed.
everytime i try to update via device update, it downloads, reboots and runs TWRP, I decrypt using password, reboots and the update fails with "Update Interrupted" message.
Is there a way to update ROM and keep encryption?

You can't OTA stock ROMs without stock recovery.

xBkKx said:
You can't OTA stock ROMs without stock recovery.
Click to expand...
Click to collapse
Thanks for your response. I tried updating ROM via ODIN and was not successful. Always got stuck in boot logo after i flashed new ROM.
Is there a stock recovery I should flash over TWRP to try?
Thanks for your help.

I have never used encryption so I can't really help if there are specifics around that. What exactly are you trying to install through Odin? If it's the firmware such as THIS it should overwrite the custom recovery with the stock one. If the stock ROM isn't booting you might have to boot into recovery and factory reset/wipe dalvik cache. This is my first Samsung phone so if nothing helps someone else who'd like to offer their assistance would probably be more knowledgeable.

I was going back to stock, which I guess, was mostly successful. however, I've not been able to install new ROM, namely 4.4.2 I317UCUCNE5. so if I install from your link, that should overwrite custom recovery and allow me to upgrade to 4.4.2 ROM either OTA or via Odin?

Maybe? Using the OTA always tells me there isn't an update (cause I'm on T-Mobile I guess?) and I haven't seen any files to update to Kitkat firmware through Odin

http://forum.xda-developers.com/showthread.php?t=2618447
i'm going to try this.
thanks,

miserly said:
http://forum.xda-developers.com/showthread.php?t=2618447
i'm going to try this.
thanks,
Click to expand...
Click to collapse
haven't had time to try. tbutbut i noticed that foxfi doesn't work even though i'm rooted. i searched for tether and doesn't seem to be a working solution for a free app.

SOLVED
finally got around to following the directions from dicksteele and voila! i'm on 4.4.2!
thanks all!
m

[Q] need help finding i747 4.4.2 stock rom

New galaxy user, here its a s3 for ATT 4.4.2 i747CUCFNE4. I have rooted using the Cf Auto-Root method.
Along the lines of trying to flash a new task manager apk, (for I had to factory reset my phone because the original task manager was missing) I came across a thread that had s5 apps (settings apk) and tried flashing this apk(don't laugh I know.) Then I couldn't get my phone to boot through the standard setup wizard. So I tried booting into recovery and factory resetting my phone clearing cache, dalvik, and partition.
My biggest problem arose when I chose to format system from ghe recovery.
I know all this can be fixed with odin but I can't find a 4.4.2 os link, I have read I can't simply downgrade my os. A link to a 4.4.2 stock rom thread would be greatly appreciated. I also have the Ktoonsez kernel installed if that makes any difference.

AT&T never released a full 4.4.2 ROM. AT&T released 4.3 and 4.4.2 via OTA updates only.
Since you are on the NE4 bootloader, do not flash anything that will attempt to downgrade the bootloader or the modem. A mismatched modem/bootloader combination may cause other problems.
Have a look here: http://forum.xda-developers.com/showthread.php?t=2789917

Ok I just reviewed your link in your response but just to be clear I'm starting where it says step 3: stock deodex and root and finishing the walkthrough from there?
And also will this reset me to my factory kernel?? Either or it doesnt matter to me I'm still trying to find one that I find suitable.
And I appreciate the speedy response you've been a huge help.

If you just want to get your phone up and running, I would flash Philz and then CM11. Confirm the bootloader and modem then decide if a stock ROM would be best.
I am always paranoid when it comes to flashing bootloaders on the s3 so I prefer to know exactly whan my phone is running.
I have never used the thread I linked because I no longer have an s3 i747m. Infact, I haven't had my s3 for several months.

Ok and my last question is you can flash Philz and CWM 11 through odin?
Nevermind I see it now greatly appreciated

I hope it all goes well. With CM11, you will also need to flash Gapps via CWM as CM11 does not include certain apps such as the Play store.

Now odin wont recoginize or open any of my rom files. Li see the rom im trying to flash by name but when i click open it only opens the next folder instead of initiating the flash. I really just need someone who has a 4.4.2 stock rom in md5 format.(edited or not.)
As a last effort if i get no answer im going to try to downgrade to another os and reupdate to 4.4.2 right after. Ive been searching for days now all i see are guides from how to upgrade to a different os . If it does include 4.4.2 they only posted the update and not the entire rom.
And when i do find someone posting a full rom for 4.4.2 its either not for 747i or its not a md5 file so someone plz help me.

glyph2 said:
Now odin wont recoginize or open any of my rom files. Li see the rom im trying to flash by name but when i click open it only opens the next folder instead of initiating the flash. I really just need someone who has a 4.4.2 stock rom in md5 format.(edited or not.)
As a last effort if i get no answer im going to try to downgrade to another os and reupdate to 4.4.2 right after. Ive been searching for days now all i see are guides from how to upgrade to a different os . If it does include 4.4.2 they only posted the update and not the entire rom.
And when i do find someone posting a full rom for 4.4.2 its either not for 747i or its not a md5 file so someone plz help me.
Click to expand...
Click to collapse
DO NOT downgrade to a bootloader older than your NE4 -- doing so will cause a hard brick.
You did mean i747 instead of 747i, didn't you?
Odin is designed to not flash any stock rom that would install a bootloader than the one on your phone. this is to save you from hard bricking your phone. Since you are on 4.4.2, any stock rom in a .tar.md5 format has an older bootloader than your NE4. As far as I know, the only stock NE4 rom on the forums is in a .zip format for flashing from recovery, it was posted by enewman17. (The thread audit13 linked.) If you tried to flash an older bootloader and baseband package through recovery you will probably hardbrick the phone.
Otherwise, there are roms based on TW in the forums: S3Rx, TMS3KK, Likewise, and others. Some use the stock kernel, others give you an option from their Aroma install. The iBubbler's kernel in a couple of these roms is reported to be excellent.
I'm guessing you pulled your S5 apk from either the S3Rx or Likewise thread.

I appreciate everyones feedback and guideance. Yeah I meant i747. It gets pretty easy to misread something when all you've been doing was researching roms and guides. And now its back to researching and finding one of the roms you mentioned. Much appreciated everyone I hope u all have a blessed day..

i know this a zip , but maybe could find help in the thread.
http://forum.xda-developers.com/showthread.php?t=2788357
good luck.
"all I can really do, is stay out of my own way and let the will of heaven be done"

[Q] Questions about going back to stock.

Hey guys,
I was running Cyanogenmod 11 for a while which I installed using the automatic tool online. During the summer I flashed Dirty Unicorns but I have issues with the camera and random rebooting. I just got a Galaxy Gear for Christmas and I've read that its only compatible with touchwiz roms.
I'm trying to go back to stock and I am ok with losing my root access.
I have an SGH-1747m on Baseband I747MVLUEMK5 and my service provider is Bell. The android version is 4.4.4 currently. Whats the easiest method to do this? I've read some concerning information that going back to an earlier version of android will soft brick your phone, but I believe the most current Bell firmware is still in Jelly Bean.
Is it as easy as downloading the correct firmware and flashing it using Clockworkmod Recovery?
Thanks

You should download the stock ROM from sammobile.com and flash it in Odin to get back to stock.

audit13 said:
You should download the stock ROM from sammobile.com and flash it in Odin to get back to stock.
Click to expand...
Click to collapse
The latest version available for my baseband is 4.3. Will I run into problems going from 4.4.4 to 4.3?

Flashing in Odin will flash everything, including the bootloader and modem.

audit13 said:
Flashing in Odin will flash everything, including the bootloader and modem.
Click to expand...
Click to collapse
Thanks. So if I'm understanding correctly I just flash the latest firmware released by my carrier (4.4.2)? Is there anything else to watch out for when choosing the firmware?
Also, before flashing should I make a backup with Clockwork Recovery or any other program? Will Clockwork Recovery still be present after flashing with ODIN?

ZombieLee said:
Thanks. So if I'm understanding correctly I just flash the latest firmware released by my carrier (4.4.2)? Is there anything else to watch out for when choosing the firmware?
Also, before flashing should I make a backup with Clockwork Recovery or any other program? Will Clockwork Recovery still be present after flashing with ODIN?
Click to expand...
Click to collapse
Yes, flash the latest firmware for your phone. Be sure it's firmware for the i747m and not anything else. Always make a backup if you ever screw up or want to go back to where you are now. You will lose everything by flashing the stock firmware with ODIN, even clockwork mod recovery.

Thanks. When I made a backup before going to Dirty Unicorns I used Clockwork Recovery. If Clockwork will be deleted by flashing with ODIN, how would I utilize that backup if I needed it? Should I use another program to back up?
EDIT: I flashed it and everything went smoothly. Sincere thanks to everyone who gave me help!

[Q] APN not listed and cannot add

I was on CM 10.2.1
I upgraded to CM11 - I get no wireless data. My phone works but I have no APNs and I could not add them.
I tried SlimKat 9.0 same issue with the APN
I upgraded my CWM to 6.4.0.7 as I heard that caused issues when upgrading to CM11.
I bought Mobile Odin and flashed that way as I thought it might help.
Ive done the following to fix my APN
1) Loaded an old one from working CM 10.2.1
2) Run Root Tweak with the fix APN for CM11 checked
3) Done the airplane mode trick
4) Attempt to add one manually
Does anyone know why this is happening and more importantly how to correct this issue?
Yes I did pore through other threads on how to fix this but no avail.
Thank you

What is your bootloader and modem? Do you get data if you re-install your previous ROM?

audit13 said:
What is your bootloader and modem? Do you get data if you re-install your previous ROM?
Click to expand...
Click to collapse
Bootloader = I747UCDLK3
Modem = I747UCDLK3
Yes I get data when I load a backup of CM 10.2.1
Thanks

Data does not work on ROMs beyond cm10.2 because your bootloader and modem to too old.
I recommend flashing back to stock 4.1.1, sim unlock your phone if it is not already sim unlocked, and run OTA updates to at least 4.3, then install recovery and CM11.

audit13 said:
Data does not work on ROMs beyond cm10.2 because your bootloader and modem to too old.
I recommend flashing back to stock 4.1.1, sim unlock your phone if it is not already sim unlocked, and run OTA updates to at least 4.3, then install recovery and CM11.
Click to expand...
Click to collapse
Thanks for the quick reply. That sounds hard. From what I'm reading going back is treacherous.
So these are the steps.
1. Load this firmware via ODIN -> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.zip -- What about gapps? Is that in this zip?
2. Run triangle away. (Do I need to do this?)
3. Contact my carrier to unlock my sim. (If this is carrier unlocking ie taking my att phone to Sprint etc, why is this needed?)
4. Get OTA updates. Will this come automagically because I'm on 4.1.1 and does it matter if my flash counter is gt 1?
5. Root phone via Odin with this file CF-Auto-Root-d2att-d2uc-samsungsghi747.tar.md5.
6. Install CWM if it went away when I went back to firmware - Of course it would because I'll factory reset my phone in step 1.
7. Flash away to a 4.4.4 Rom
Did I miss anything?
Step 4 is the one that scares me -- That one is out of my control. Either I get the OTA or I dont. Anyway I can "request" the OTA?
Thanks again
Be Well

From your custom ROM, run triangle away to reset counter and change things back to official.
Now flash back to stock 4.1.1 using Odin. If your phone does not boot, you need to get into recovery, do a factory reset, and reboot the phone and go through the set up routine.
After loading stock 4.1.1, do this to sim unlock your phone for free: http://forum.xda-developers.com/showthread.php?t=2529200. If you have a code from ATT, you must be running a stock ROM or a custom ROM that is based on a stock Samsung ROM in order to enter the unlock code.
You must be on a stock ROM in order to take OTA updates. OTA updates are the safest way to obtain an updated bootloader and modem.
After updating to 4.3, you cannot downgrade the bootloader as doing so may brick the phone.
The choice is yours in terms of what you want to do. As you found out, some ROMs will not function properly without an updated bootloader and modem. Mixing modem and bootloader versions may also result in a bricked phone.

audit13 said:
From your custom ROM, run triangle away to reset counter and change things back to official.
Now flash back to stock 4.1.1 using Odin. If your phone does not boot, you need to get into recovery, do a factory reset, and reboot the phone and go through the set up routine.
After loading stock 4.1.1, do this to sim unlock your phone for free: http://forum.xda-developers.com/showthread.php?t=2529200. If you have a code from ATT, you must be running a stock ROM or a custom ROM that is based on a stock Samsung ROM in order to enter the unlock code.
You must be on a stock ROM in order to take OTA updates. OTA updates are the safest way to obtain an updated bootloader and modem.
After updating to 4.3, you cannot downgrade the bootloader as doing so may brick the phone.
The choice is yours in terms of what you want to do. As you found out, some ROMs will not function properly without an updated bootloader and modem. Mixing modem and bootloader versions may also result in a bricked phone.
Click to expand...
Click to collapse
To stick with 10.2 or not to that is the question. Everytime I flash or do anything like this on my phone - I get a small lump in my throat knowing I'm dancing in the razors edge of bricking it.

I know how you feel, but I've done it enough times and just accept the fact that I may brick the phone. Jtag service would cost me around $75 so I'm willing to take the chance. I'd be less willing if the phone still has warranty.
Flashing back to stock and running OTA updates is the safest route.
If you don't sim unlock while on stock 4.1.1 and you want to sim unlock your phone in the future, you will need to be on a stock or virtually stock ROM in order to enter the unlock code.

Used ODIN to go back to stock 4.1.1.
Got the OTA update to 4.3
I have my MMS and cellular data back
I'll stick on stock, unrooted 4.3 for a minute.
I should be available to root and update to CM11 or SlimKat or any 4.4 rom whenever I so desire and still keep cellular data.
My baseband is I747UCUEMJB. How can I find out my bootloader and modem versions on UNROOTED device?
Your help is much appreciated and your instructions were flawless.

ddunleavy2 said:
Used ODIN to go back to stock 4.1.1.
Got the OTA update to 4.3
I have my MMS and cellular data back
I'll stick on stock, unrooted 4.3 for a minute.
I should be available to root and update to CM11 or SlimKat or any 4.4 rom whenever I so desire and still keep cellular data.
My baseband is I747UCUEMJB. How can I find out my bootloader and modem versions on UNROOTED device?
Your help is much appreciated and your instructions were flawless.
Click to expand...
Click to collapse
In a terminal or adb shell you can enter this to check your bootloader:
Code:
getprop ro.bootloader
In a terminal or adb shell you can enter this to check your modem (should match the baseband your phone reports in About):
Code:
getprop gsm.version.baseband
I don't believe either of these commands require root unless stock has getprop locked down tighter that AOSP ROMs; I just entered them in a user shell.
There are a couple of firmware updates for your device beyond MJB, NE4 and NJ1. Some users, myself included, had GPS problems that were a bit of a pain to fix on newer 4.4 AOSP based ROMs with the MJB firmware, but data was ok with MJB. Also, you'll need newer firmware if you decide to test drive the lollipop alphas that are floating around. There are custom recovery flashable firmware updates on XDA from a trusted developer if you decide you need that, or you might want to take a couple more OTAs if you're more comfortable going that route. You're already on MJB so there's no going back

The terminal worked
Bootloader and baseband = I747UCUEMJB
What???? I might need more updates for all the roms out there.....ugggh.
"There are custom recovery flashable firmware updates on XDA from a trusted developer if you decide you need that, or you might want to take a couple more OTAs if you're more comfortable going that route."
If I decide to use these flashable firmware updates on XDA from a trusted developer or OTA its same as this: going forward and NEVER going backward when getting firmware updates?, yes?

yes. downgrading bootloader will almost certainly cause a brick.
"all i can really do , is stay out of my own way and let the will of heaven be done"
---------- Post added at 10:09 PM ---------- Previous post was at 10:07 PM ----------
audit13 said:
Data does not work on ROMs beyond cm10.2 because your bootloader and modem to too old.
I recommend flashing back to stock 4.1.1, sim unlock your phone if it is not already sim unlocked, and run OTA updates to at least 4.3, then install recovery and CM11.
Click to expand...
Click to collapse
+1
"all i can really do , is stay out of my own way and let the will of heaven be done"

You guys are on point.
Last night I received another OTA to 4.4.2.
Baseband now at NE4.
Thanks again for taking the time to answer all this -- Really really appreciate it.
EDIT: Can I still use this to root my phone via ODIN or is there a different process for this baseband?
CF-Auto-Root-d2att-d2uc-samsungsghi747.tar.md5
I load this into ODIN, plug my phone in download mode and root away. Does either the file I use change or do I have to use something other than ODIN?
Thanks again

To get root, I would flash a custom recovery and flash supersu from recovery, then let supersu disable know.
The file you named looks to be outdated as it refers to the s3 as d2att. Since unified builds were released, the s3 is now referred to as the d2lte.

I have ROM Manager installed. It has an option to "Flash Clockworkmod Recovery". I just tried it and it failed and I think thats because I dont have root. In the past I've had to root my phone via ODIN, then flash custom recovery then MOD away.
In the past I rooted the S3 via ODIN. With this new 4.4.2 version do I still root via ODIN provide I find the correct file because -> CF-Auto-Root-d2att-d2uc-samsungsghi747.tar.md5 this one is probably for a 4.1.1 version phone?

I would not flash anything for the d2att at this point.
Try this:
Download the latest tar.md5 file from here: https://goo.im/devs/philz_touch/CWM_...Edition/d2lte/
Download supersu zip from here and place it onto an external SD card or copy it to the phone's internal storage: http://download.chainfire.eu/695/SuperSU/
In Odin, uncheck everything except f.reset time. Flash Philz. When you see reset in the status window, remove USB cable, pull battery, replace battery, boot into recovery, flash supersu, reboot.

I am fairly certain that AOSP, or at least CM, de-unified in the past few months. Not that it matters much, other than for the confusion it causes.