New galaxy user, here its a s3 for ATT 4.4.2 i747CUCFNE4. I have rooted using the Cf Auto-Root method.
Along the lines of trying to flash a new task manager apk, (for I had to factory reset my phone because the original task manager was missing) I came across a thread that had s5 apps (settings apk) and tried flashing this apk(don't laugh I know.) Then I couldn't get my phone to boot through the standard setup wizard. So I tried booting into recovery and factory resetting my phone clearing cache, dalvik, and partition.
My biggest problem arose when I chose to format system from ghe recovery.
I know all this can be fixed with odin but I can't find a 4.4.2 os link, I have read I can't simply downgrade my os. A link to a 4.4.2 stock rom thread would be greatly appreciated. I also have the Ktoonsez kernel installed if that makes any difference.
AT&T never released a full 4.4.2 ROM. AT&T released 4.3 and 4.4.2 via OTA updates only.
Since you are on the NE4 bootloader, do not flash anything that will attempt to downgrade the bootloader or the modem. A mismatched modem/bootloader combination may cause other problems.
Have a look here: http://forum.xda-developers.com/showthread.php?t=2789917
Ok I just reviewed your link in your response but just to be clear I'm starting where it says step 3: stock deodex and root and finishing the walkthrough from there?
And also will this reset me to my factory kernel?? Either or it doesnt matter to me I'm still trying to find one that I find suitable.
And I appreciate the speedy response you've been a huge help.
If you just want to get your phone up and running, I would flash Philz and then CM11. Confirm the bootloader and modem then decide if a stock ROM would be best.
I am always paranoid when it comes to flashing bootloaders on the s3 so I prefer to know exactly whan my phone is running.
I have never used the thread I linked because I no longer have an s3 i747m. Infact, I haven't had my s3 for several months.
Ok and my last question is you can flash Philz and CWM 11 through odin?
Nevermind I see it now greatly appreciated
I hope it all goes well. With CM11, you will also need to flash Gapps via CWM as CM11 does not include certain apps such as the Play store.
Now odin wont recoginize or open any of my rom files. Li see the rom im trying to flash by name but when i click open it only opens the next folder instead of initiating the flash. I really just need someone who has a 4.4.2 stock rom in md5 format.(edited or not.)
As a last effort if i get no answer im going to try to downgrade to another os and reupdate to 4.4.2 right after. Ive been searching for days now all i see are guides from how to upgrade to a different os . If it does include 4.4.2 they only posted the update and not the entire rom.
And when i do find someone posting a full rom for 4.4.2 its either not for 747i or its not a md5 file so someone plz help me.
glyph2 said:
Now odin wont recoginize or open any of my rom files. Li see the rom im trying to flash by name but when i click open it only opens the next folder instead of initiating the flash. I really just need someone who has a 4.4.2 stock rom in md5 format.(edited or not.)
As a last effort if i get no answer im going to try to downgrade to another os and reupdate to 4.4.2 right after. Ive been searching for days now all i see are guides from how to upgrade to a different os . If it does include 4.4.2 they only posted the update and not the entire rom.
And when i do find someone posting a full rom for 4.4.2 its either not for 747i or its not a md5 file so someone plz help me.
Click to expand...
Click to collapse
DO NOT downgrade to a bootloader older than your NE4 -- doing so will cause a hard brick.
You did mean i747 instead of 747i, didn't you?
Odin is designed to not flash any stock rom that would install a bootloader than the one on your phone. this is to save you from hard bricking your phone. Since you are on 4.4.2, any stock rom in a .tar.md5 format has an older bootloader than your NE4. As far as I know, the only stock NE4 rom on the forums is in a .zip format for flashing from recovery, it was posted by enewman17. (The thread audit13 linked.) If you tried to flash an older bootloader and baseband package through recovery you will probably hardbrick the phone.
Otherwise, there are roms based on TW in the forums: S3Rx, TMS3KK, Likewise, and others. Some use the stock kernel, others give you an option from their Aroma install. The iBubbler's kernel in a couple of these roms is reported to be excellent.
I'm guessing you pulled your S5 apk from either the S3Rx or Likewise thread.
I appreciate everyones feedback and guideance. Yeah I meant i747. It gets pretty easy to misread something when all you've been doing was researching roms and guides. And now its back to researching and finding one of the roms you mentioned. Much appreciated everyone I hope u all have a blessed day..
i know this a zip , but maybe could find help in the thread.
http://forum.xda-developers.com/showthread.php?t=2788357
good luck.
"all I can really do, is stay out of my own way and let the will of heaven be done"
Related
ok im used to my htc m8..so i need to be reminded few things..for instance with the m8 updateing firmware is very easy and they have options to keep root and custom recovery and custom rom,only updateing some paritions not all of them..they post modified zip to flash ...my question is does someone have a zip to flash to update firmware to the ne6 on tmobile note 3 ,one that wont include stock recovery ,one i can flash and keep my custom rom and twrp..ive read the usefull thread where member posted several paritions of the NE6 firmware..but im not used to that..am i pose to flash every file he posted serpertly?..not all of them was a zip...one i think was a bin file..isnt odin the only tool we can use with samsung to flash,heard of one more started with an H im sorry cant remember the name..can someone plz fill in the blanks id be gratefull ..from there i would be able to figure the rest out..thank you
re: flashing firmware
lucky_515 said:
ok im used to my htc m8..so i need to be reminded few things..for instance with the m8 updateing firmware is very easy and they have options to keep root and custom recovery and custom rom,only updateing some paritions not all of them..they post modified zip to flash ...my question is does someone have a zip to flash to update firmware to the ne6 on tmobile note 3 ,one that wont include stock recovery ,one i can flash and keep my custom rom and twrp..ive read the usefull thread where member posted several paritions of the NE6 firmware..but im not used to that..am i pose to flash every file he posted serpertly?..not all of them was a zip...one i think was a bin file..isnt odin the only tool we can use with samsung to flash,heard of one more started with an H im sorry cant remember the name..can someone plz fill in the blanks id be gratefull ..from there i would be able to figure the rest out..thank you
Click to expand...
Click to collapse
I really doubt that there is anything like you have described for
the Note 3 device, if there was you would have already found it.
Why not simply do it like everyone else and odin flash the
latest Note 3 N900T official stock firmware and then root
the phone and flash twrp recovery.
Once that's done you will be able to flash any of the current
custom roms available in this forum without any issues.
Good luck!
Misterjunky said:
I really doubt that there is anything like you have described for
the Note 3 device, if there was you would have already found it.
Why not simply do it like everyone else and odin flash the
latest Note 3 N900T official stock firmware and then root
the phone and flash twrp recovery.
Once that's done you will be able to flash any of the current
custom roms available in this forum without any issues.
Good luck!
Click to expand...
Click to collapse
yeah thanks...just wanted to know my options..i wanted to know for sure if this was possible or not..i have downloaded firmware from sammobile tar file flashed via odin .i thought if did this it would wipe all data and be back to stock completly ...weird after doing this alot never changed..lost root...all data was still there even the wallpapper i had before i flashed ...jus had extra stock apps i never saw before and i was still on same firmware when i was done..dont understand why this diddnt work...but anyhow i downloaded the full stock image from a thread...and before i used it wanted make sure i knew all my options im not trying to be dificult or diff from all the rest of you guys...like i said i came from useing htc m8 ...was not used to samsung ways ...kinda forgot alot of things..sorry to waste your time
Now odin wont recoginize or open any of my rom files. Li see the rom im trying to flash by name but when i click open it only opens the next folder instead of initiating the flash. I really just need someone who has a 4.4.2 stock rom in md5 format.(edited or not.)
As a last effort if i get no answer im going to try to downgrade to another os and reupdate to 4.4.2 right after. Ive been searching for days now all i see are guides from how to upgrade to a different os . If it does include 4.4.2 they only posted the update and not the entire rom.
And when i do find someone posting a full rom for 4.4.2 its either not for 747i or its not a md5 file so someone plz help me
glyph2 said:
Now odin wont recoginize or open any of my rom files. Li see the rom im trying to flash by name but when i click open it only opens the next folder instead of initiating the flash. I really just need someone who has a 4.4.2 stock rom in md5 format.(edited or not.)
As a last effort if i get no answer im going to try to downgrade to another os and reupdate to 4.4.2 right after. Ive been searching for days now all i see are guides from how to upgrade to a different os . If it does include 4.4.2 they only posted the update and not the entire rom.
And when i do find someone posting a full rom for 4.4.2 its either not for 747i or its not a md5 file so someone plz help me
Click to expand...
Click to collapse
What bootloader are you on? Enewman17 made an ODIN flashable file for Android 4.3 MJB. I don't think anyone made an ODIN file for Android 4.4.2 NE4 or 4.4.2 NJ1, but I could be wrong. I know there are flashable .zip files for NE4 and NJ1 to update that you flash in TWRP or CWM recovery.
Im running NE4
The latest is NJ1 which was available from AT&T as an OTA update only. You need to unrooted and running stock recovery in order to install the update.
I do not recommend downgrading the bootloader as this would probably brick your phone.
Did you try reinstalling the Samsung drivers?
Q&A for [ROM] I747UCUFNE4_AT&T 4.4.2 Stock ROM & System Dump
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] I747UCUFNE4_AT&T 4.4.2 Stock ROM & System Dump. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
help
i have being trying to update my samsung SGH i747 to version 4.4.2 for a very long time now but with no luck, i just saw your files at when i was doing a research now so i followed it untill i got to your thread here, i am so happy about it.
I will lke to ask you this, i followed some tutorials some months ago and i upgraded my fone (I747) baseband to I747UCUFNE4 also the build number is JSS15J.I747UCUEMJB. The andriod version is currently 4.3 but has 4.4.2 baseband. i will like to ask if i flash your provided file I747UCUFNE4_Stock_Rooted_Deodex or I747UCUFNE4_Stock_Rooted_Odex want i brick my phone?
also i will like to ask with the "Samsung_SGH-I747_4.4.2_OTA_update.zip" file you provided how can i use that to update my phone (if only possible). Should i use odin or via recovery. Thank you
flashable tar via odin for 4.4.2?
Does anyone know if there is a 4.4.2 flashable tar via odin? I was running on 4.3 with 4.4.2 baseband version and I couldn't install custom ROM so I use EZ unlock to unlock the bootloader (stupid me didn't know it only works on Verizon phone) and my phone went into hard brick. I was able to debrick and get into download mode but so far unable to start the phone without the microSDard. Any help would be appreciated. Thanks!
hatboy03 said:
Does anyone know if there is a 4.4.2 flashable tar via odin? I was running on 4.3 with 4.4.2 baseband version and I couldn't install custom ROM so I use EZ unlock to unlock the bootloader (stupid me didn't know it only works on Verizon phone) and my phone went into hard brick. I was able to debrick and get into download mode but so far unable to start the phone without the microSDard. Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
No ODIN tar file for 4.4.2 , Samsung and/or at&t only released it as an OTA update.
---------- Post added at 12:21 PM ---------- Previous post was at 12:17 PM ----------
invisibleguy said:
i have being trying to update my samsung SGH i747 to version 4.4.2 for a very long time now but with no luck, i just saw your files at when i was doing a research now so i followed it untill i got to your thread here, i am so happy about it.
I will lke to ask you this, i followed some tutorials some months ago and i upgraded my fone (I747) baseband to I747UCUFNE4 also the build number is JSS15J.I747UCUEMJB. The andriod version is currently 4.3 but has 4.4.2 baseband. i will like to ask if i flash your provided file I747UCUFNE4_Stock_Rooted_Deodex or I747UCUFNE4_Stock_Rooted_Odex want i brick my phone?
also i will like to ask with the "Samsung_SGH-I747_4.4.2_OTA_update.zip" file you provided how can i use that to update my phone (if only possible). Should i use odin or via recovery. Thank you
Click to expand...
Click to collapse
Flashing the NE4_stock_rooted file shouldn't brick your phone, but don't quote me on it. You use the Samsung_SGH-I747_4.4.2_OTA_update.zip in a custom recovery like clockwork mod.
StoneyJSG said:
No ODIN tar file for 4.4.2 , Samsung and/or at&t only released it as an OTA update.
Click to expand...
Click to collapse
darn it. Thanks.
No O/S - can only boot into download mode
I've got an interesting one. I was prepping my phone for selling, decided to clear out all the memory. Somehow I must have deleted more than I meant to b/c when I restarted the phone, it just hangs on the Samsung screen. I can get into download mode, but not into recovery and nothing ever loads. I tried at least one version of installing CWM but it doesnt look like I can boot into recovery even after the Odin install appears ok. Before the crash, I was running a modded 4.4.2 rom with the bootloader and other things that come with it. Is there anything I can do to get this thing up and running again?
Thanks1
WIFI??
Just tried to flash ODEX version and now my WIFI is not working?
Any suggestions please?
EG777 said:
Just tried to flash ODEX version and now my WIFI is not working?
Any suggestions please?
Click to expand...
Click to collapse
Does the bootloader and modem on your phone match this rom? That could be why wifi won't work. You can check by entering this in a terminal app or adb shell; if they don't end in NE4 it is probably part of your problem:
Code:
getprop ro.bootloader
getprop gsm.version.baseband
If you don't want to mess with the bootloader and modem on your phone you might be able to get everything working by flashing a custom kernel. Try the ktoonsez touchwiz versions with this rom. Just flash the kernel in recovery like you did the rom (no wipes for kernel, just install - although if you find it won't boot maybe try wiping cache and dalvik) and it will overwrite the default one the rom was packaged with. A nandroid backup of boot could revert the kernel if kt causes any problems.
Thank you!
jason2678 said:
Does the bootloader and modem on your phone match this rom? That could be why wifi won't work. You can check by entering this in a terminal app or adb shell; if they don't end in NE4 it is probably part of your problem:
Code:
getprop ro.bootloader
getprop gsm.version.baseband
If you don't want to mess with the bootloader and modem on your phone you might be able to get everything working by flashing a custom kernel. Try the ktoonsez touchwiz versions with this rom. Just flash the kernel in recovery like you did the rom (no wipes for kernel, just install - although if you find it won't boot maybe try wiping cache and dalvik) and it will overwrite the default one the rom was packaged with. A nandroid backup of boot could revert the kernel if kt causes any problems.
Click to expand...
Click to collapse
Now I see what you mean! THANK YOU for your response.
It seems by Bootloader does not match after all as it ends in NJ1.
EG777 said:
Now I see what you mean! THANK YOU for your response.
It seems by Bootloader does not match after all as it ends in NJ1.
Click to expand...
Click to collapse
OK. Either flash the KT kernel, or this ROM https://www.androidfilehost.com/?fid=95784891001613266
Either one should get your phone working right again.
EG777 said:
Now I see what you mean! THANK YOU for your response.
It seems by Bootloader does not match after all as it ends in NJ1.
Click to expand...
Click to collapse
usually it is wise to have bootloader and modem match. if bootloader is NJ1 , then modem needs to match. there's a thread here somewhere.
http://forum.xda-developers.com/showthread.php?t=2941792
here is the link to a flashable nj1 bootloader/modem if you want. PLEASE - make a backup & read read read. good luck.:thumbup:
"all i can really do , is stay out of my own way and let the will of heaven be done"
Help
My galaxy s3 I747 not start.
The phone won't power up or it won't fully boot the rom? Did something happen to the phone that may have caused the issue?
Hey all. I am fairly inexperienced when it comes to rooting, though I have done a few succesfully in the past. I currently have the newest version of TWRP installed on my Samsung I747M. The I747M I have is not from one of the major carriers, but as far as I am aware, the phone is factory network unlocked. Carrier is GCI, in Alaska.
I currently have a 4.4.2 Touchwiz Rom installed and started having problems after I attempted to flash the ROM Dandroid, which is 4.3 (http://forum.xda-developers.com/showthread.php?t=2121506). I had created a backup using TWRP before flashing the ROM and reverted back once I noticed the problem.
The main issue I am experiencing at this time is the Baseband Version, IMEI, and other information related to the modem is showing "Unknown" and features such as wifi will not toggle on.
I had also attempted to flash the most current version of the modem that I was able to find thru Odin. Odin showed the flash as successful. The version I flashed to the phone was I747MUMUEND3: modem_CWM_I747MUMUEND3.zip - 18.80 MB - April 3rd, 2014 (http://forum.xda-developers.com/showthread.php?t=1831898)
At this point, I can still get into recovery, download modem and I am able to boot up the phone and access most all functions. The next step I was going to try was going to be to flash back to stock firmware from sammobile's website (Was using to use the Roger's version of 4.4.2), though I don't want to cause more issues than I can handle or resolve thru software.
Any advice on how to proceed would be greatly appreciated or even just how to get the modem/wifi features functional again would be helpful. I'm just as happy staying on my current ROM at this point if I can get the phone fully functional again.
It's possible that the rom is not compatible with the kk modem and bootloader.
Flash cm12.1 to see if your imei comes back.
audit13 said:
It's possible that the rom is not compatible with the kk modem and bootloader.
Flash cm12.1 to see if your imei comes back.
Click to expand...
Click to collapse
Forgot to mention, this is something I did try. I attempted to flash Cyanogen Mod 12.1 (Download: cm-12.1-20151017-NIGHTLY-d2att.zip (286.76 MB) ) and most recent nightly build & the most recent stable release (CM11) (Download: cm-11-20140210-SNAPSHOT-M3-d2att.zip (194.37 MB) ). When flashing these, I transferred the downloaded ZIP file to the internal storage of the phone in the root directory and attempted to run an install from TWRP. Both installs failed.
Since the phone is an i747m, I recommend flashing back to stock using Odin 3.07 and stock ROM file from here: http://www.sammobile.com/firmwares/database/SGH-I747M/
The i747m versions are interchangeable between Rogers, Telus, and Bell.
After flashing back to stock, install TWRP using Odin 3007 from here: https://dl.twrp.me/d2att/twrp-2.8.7.0-d2att.img.tar
Create a nandroid backup using TWRP and then try to flash a custom ROM again.
audit13 said:
Since the phone is an i747m, I recommend flashing back to stock using Odin 3.07 and stock ROM file from here: URL REMOVED FROM QUOTE DUE TO NEW USER LIMITATIONS
The i747m versions are interchangeable between Rogers, Telus, and Bell.
After flashing back to stock, install TWRP using Odin 3007 from here: URL REMOVED FROM QUOTE DUE TO NEW USER LIMITATIONS
Create a nandroid backup using TWRP and then try to flash a custom ROM again.
Click to expand...
Click to collapse
I'll give that a shot when I get home. Stock firmware was one of my next thoughts. I have it downloading at the measly 15 Kbps offered for free from sammobile so hopefully should be done by the time I get home & update this thread with any progress.
Another possibility is a custom kernel, if you are wishing to stay with TouchWiz and not wanting to upgrade your bootloader and modem past 4.3.
Some of the 4.4.2 TW roms will run on 4.3 bootloader and modems using one of ibuddler's kernels or ktoonsez's TW kernel. This was discussed most in the Likewise ROM thread and links to the various versions of ibuddler's kernel may be found there. It may have also been discussed in TMS3KK thread. The ktoonsez kernel can be found in its own thread.
But, you may really want to consider a newer ROM in order to change to something with the stagefright fixes. I think any of these may require the latest 4.4.2 bootloader and modem. (What say you @audit13?)
dawgdoc said:
Another possibility is a custom kernel, if you are wishing to stay with TouchWiz and not wanting to upgrade your bootloader and modem past 4.3.
Some of the 4.4.2 TW roms will run on 4.3 bootloader and modems using one of ibuddler's kernels or ktoonsez's TW kernel. This was discussed most in the "http://forum.xda-developers.com/showthread.php?t=2725192"Likewise ROM thread and links to the various versions of ibuddler's kernel may be found there. It may have also been discussed in http://forum.xda-developers.com/showthread.php?t=2725750" TMS3KK thread. The http://forum.xda-developers.com/showthread.php?t=1756776" ktoonsez kernel can be found in its own thread.
But, you may really want to consider a newer ROM in order to change to something with the stagefright fixes. I think any of these may require the latest 4.4.2 bootloader and modem. (What say you @audit13?)
Click to expand...
Click to collapse
I'm not opposed to any of this. Mostly just trying to slim down this phone to the basics as much as I can and am quite open to any recommendations. Main thing I want to maximize is battery life & simplicity since this is for my wife and those are her major wants in a phone. I figure any kind of ROM that just covers the basics should cover my bases & would prefer one with a darker/black skin to maximize battery life w/ the OLED screen. I am in the process of flashing to the Roger's stock ROM as I type this w/ my fingers crossed.
Just to add, no over clocking or anything of that nature is desired. If I remember correctly I ended up putting the ktoonsez kernel on one of my handsets, either this Galaxy S3 or my Galaxy S5, though I can't recall which since it was so long ago.
Alright! So progress! Wifi, Baseband version, IMEI and all other missing information restored & now works w/ stock rom flash. In process of reflashing TWRP now.
Let us know what happens.
Still all good with TWRP installed. Have not flashed back on a custom ROM yet. After reviewing some of the above recommendations, I am kind of liking the looks & features of TMS3KK (http://forum.xda-developers.com/showthread.php?t=2725750) and feel it would suit my needs.
I factory reset, cleared cache, and cleared Dalvik thru TWRP & then made a back up. Prior to this, I confirmed everything was still working normally w/ phone fully loaded after TWRP was installed.
One of the things mentioned on the installation instructions for that ROM is the following:
---
Do not mix and match 4.3 firmware (bootloaders/modem) with the new 4.4.2 ones. You will hard brick and I warned you. This works the same as any 4.3 or ND8port ROM with 4.3 firmware and it can use the new 4.4.2 ones also.
Link to recovery flashable i747 and i747M 4.4.2 bootloader and modem packages: http://forum.xda-developers.com/gala...hable-t2856914
---
How would I go about confirming my current bootloader/modem versions to make sure they are both 4.4.2 before flashing this ROM? At the link provided, those files/links to the files were removed because they were causing some bricked devices per a note at the top of that thread. Here's a link to the thread I am referencing since the above link looks to be broken. (http://forum.xda-developers.com/gal...mware-ne4-ne6-nf2-recovery-flashable-t2856914)
If you flashed the latest stock rom, you are running the latest 4.4.2 bootoader and modem.
You can download and run the Samsung phone info app from the play store to confirm this.
You should be good to flash any d2lte or d2att rom.
I recommend not flashing any modem or bootoader from this point forward unless the bootoader and modem are newer than the currently installed botloader and modem. Also, the botloader and modem must be matched to each other.
audit13 said:
If you flashed the latest stock rom, you are running the latest 4.4.2 bootoader and modem.
You can download and run the Samsung phone info app from the play store to confirm this.
You should be good to flash any d2lte or d2att rom.
I recommend not flashing any modem or bootoader from this point forward unless the bootoader and modem are newer than the currently installed botloader and modem. Also, the botloader and modem must be matched to each other.
Click to expand...
Click to collapse
Thank you so much for the help and information. I guess I never realized that the bootloader & modem were installed w/ the stock rom as I always have flashed those separately through Odin when needed. Definitely good information to have and not easy information to find. I have successfully got my custom ROM on there and am now fine-tuning it for the wife.
fodor362 said:
Thank you so much for the help and information. I guess I never realized that the bootloader & modem were installed w/ the stock rom as I always have flashed those separately through Odin when needed. Definitely good information to have and not easy information to find. I have successfully got my custom ROM on there and am now fine-tuning it for the wife.
Click to expand...
Click to collapse
Glad to hear the phone is running well.
I've heard it said "Happy wife, Happy life."
Hey, sup?
I need your help, I'm trying to go back to stock firmware on my i747, currently I'm running CM11 latest snapshot.
Background: Some time ago, I accidently erased my imei. Took the phone to a guy who restored it but the phone doesn't work with 3G now, only 2G. So I wanted to try going back to stock firmware to see if that fixes the issue.
I tried downloading the CUEMJB file from here, but it doesn't work (keeps looping the same page) http://androidromupdate.com/att-samsung-galaxy-s3-sgh-i747-odin-stock-firmware/
Can you help me? Also, it is safe what I'm trying to do?
Thank you!
Triple check to make sure the imei displayed in About Device matches exactly to the one on the sticker under the battery.
If it does, and after you get stock working again, PM me and I can probably help.
As for the looping, do you mean the Web page? Just get the stock files from enewman17's thread. It's either in General or Development, can't remember for sure. Probably General.
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Triple check to make sure the imei displayed in About Device matches exactly to the one on the sticker under the battery.
If it does, and after you get stock working again, PM me and I can probably help.
As for the looping, do you mean the Web page? Just get the stock files from enewman17's thread. It's either in General or Development, can't remember for sure. Probably General.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Thank you. Yes the IMEI matches.
I was able to download the file.
Unfortunately, the thing didn't went ok. After flashing my phone is unresponsive, black screen, no more boot
If I connect it to the computer at this point, it tries to search for a QHSUSB_DLOAD driver. Not sure what is that, I think I bricked my phone.
I've seen some guides for unbricking by placing a sd card in the phone at boot but so far it haven't worked
Going to one of the 4.4.2 bootloaders and modems for your device may fix the issue, maybe without going back to stock. But I do recall that a return to stock has been required by many. If you are on newer bootloader and modem than 4.3, do not use a 4.3 (MJB) file no matter the source. As Doc said use one of the releases by enewman17 that you can flash in your custom recovery, NE4 is here. enewman17 also has threads for MJB, NJ1, and NJ2 stock ROMs; all of these are flashed in a custom recovery. With the i747 I have continually seen it recommended that you upgrade bootloader and modem sequentially, that is upgrade to NE4 before going to NJ1, and NJ1 before going to NJ2. I can provide links to enewmans other threads if necessary.
BTW, the 4.3 release was not a full rom, it was an update/patch. Files I have seen run 100 mb or less. If that is the file you want, and can use w/o bricking your device see this thread http://forum.xda-developers.com/showthread.php?t=2722660 Only use it if you are on 4.1.1, 4.1.2, or 4.3 bootloader and modem.
Another way to get a 4.3 Odin flashable update is here. You must be on 4.1.1 or 4.1.2 bootloader and modem to use this as instructed.
dawgdoc said:
Going to one of the 4.4.2 bootloaders and modems for your device may fix the issue, maybe without going back to stock. But I do recall that a return to stock has been required by many. If you are on newer bootloader and modem than 4.3, do not use a 4.3 (MJB) file no matter the source. As Doc said use one of the releases by enewman17 that you can flash in your custom recovery, NE4 is here. enewman17 also has threads for MJB, NJ1, and NJ2 stock ROMs; all of these are flashed in a custom recovery. With the i747 I have continually seen it recommended that you upgrade bootloader and modem sequentially, that is upgrade to NE4 before going to NJ1, and NJ1 before going to NJ2. I can provide links to enewmans other threads if necessary.
BTW, the 4.3 release was not a full rom, it was an update/patch. Files I have seen run 100 mb or less. If that is the file you want, and can use w/o bricking your device see this thread http://forum.xda-developers.com/showthread.php?t=2722660 Only use it if you are on 4.1.1, 4.1.2, or 4.3 bootloader and modem.
Another way to get a 4.3 Odin flashable update is here. You must be on 4.1.1 or 4.1.2 bootloader and modem to use this as instructed.
Click to expand...
Click to collapse
Thank you very much.
But I'm with a phone that doesn't boot now. What would you recommend to do if there's something to bring it back
Alright! I just tried the SD card method w/ one of the files in the threads linked. Phone boots!
So it seems my bootloader is bad right?
japi2000 said:
Thank you very much.
But I'm with a phone that doesn't boot now. What would you recommend to do if there's something to bring it back
Click to expand...
Click to collapse
Can you get into recovery? If so you can flash the appropriate stock rom by enewman17.
Do you recall what bootloader and modem you were on? If you have TWRP as your recovery there are terminal commands you can use within the recovery to determine your bl/modem versions. This may also hold true for CWM and Philz Recoveries, but I don't know for certain.
If you can not get to recovery you may need to put a debrick image on an external sdcard to boot and then restore your device.
dawgdoc said:
Can you get into recovery? If so you can flash the appropriate stock rom by enewman17.
Do you recall what bootloader and modem you were on? If you have TWRP as your recovery there are terminal commands you can use within the recovery to determine your bl/modem versions. This may also hold true for CWM and Philz Recoveries, but I don't know for certain.
If you can not get to recovery you may need to put a debrick image on an external sdcard to boot and then restore your device.
Click to expand...
Click to collapse
Yes sir. With the SD card method I managed to boot the phone. Yay!
I don't recall bootloader and modem unfortunately. I know I was using CM11 one of the latest snapshots for d2lte.
I have access to download mode. Screen reads bootloader RP SWREV:2
I have access to recovery (its a basic one though). Reads Android system recovery <3e>
What do you recommend from here?
japi2000 said:
Yes sir. With the SD card method I managed to boot the phone. Yay!
I don't recall bootloader and modem unfortunately. I know I was using CM11 one of the latest snapshots for d2lte.
I have access to download mode. Screen reads bootloader RP SWREV:2
I have access to recovery (its a basic one though). Reads Android system recovery <3e>
What do you recommend from here?
Click to expand...
Click to collapse
That is the stock recovery. If you were successfully running one of the latest CM11 snapshots, you were probably on one of the three 4.4.2 bootloaders ( and modems ), they are NE4, NJ1, and NJ2. This would explain why the MJB (4.3) image you downloaded and flashed would soft brick your phone. It looks like that flash may be responsible for you being back on stock recovery, at best guess. Before anything else, do a factory reset from the stock recovery. This is frequently necessary to boot when going from a CM/AOSP LP rom back to stock.
Since you can get to download mode, I think the best bet would be to install a custom recovery. TWRP for the i747 is here, the top image is flashable with Odin while in download mode. Remember not to reboot from Odin. Instead remove the cable, pull the battery, then boot straight to recovery. Once you have TWRP loaded, boot into recovery and use the terminal emulator in it to determine bootloader and modem with these commands:
Code:
getprop ro.bootloader
getprop | grep version.baseband
Once you know the version of bootloader and modem you had been on, reflash that version from TWRP you will probably need the file on an external sdcard to do so. After this you can flash your rom of choice from TWRP, stock or otherwise. Since you were having imei issues go with one of enewman's stock roms, as @DocHoliday77 suggested. He can then help you with the imei issues if still necessary. Any other ideas Doc?
Ok, so
Bootloader = I747UCUEMJB
I don't get anything when running getprop | grep version.baseband in the recovery.
This is what I've done so far.
Booted w/ the sdcard trick (bootloader in the sdcard).
Installed twrp
Installed the following files:
AT&T_I747UCUEMJB.zip
d2att_I747UCUEMJB_bootloader.zip
d2att_I747UCUEMJB_modem.zip
d2att_Kernel_Stock_init.d_4_3_MJB_v1.0.zip
That brought the phone to life again (w/ stock 4.3). Then I flashed CM12 from the recovery. All went ok.
Problem is, I still don't have 3G connectivity, only edge.
What would you recommend try next?
Thank you
Alright, I was able to upgrade to UCUFNJ1 for both the bootloader and baseband. Still no 3G. Ideas?
Pm me. As I said before, if the imei is correct, I might be able to help. I can't do it here though because it's against forum rules to post the info publicly. (Too many people want it for illegal use).
When you pm me, include your current bootloader and baseband. (Just so I don't have to keep coming back here for reference). Also include how it was lost and if you know how it was restored.
I know you've already posted some of this, but I get lots of PM's so it'll help me keep track of everything without going back and forth between here and there.
Also, you need to be stock for this to work, so don't flash anything else just yet.
Glad to hear you got it running again BTW!
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Pm me. As I said before, if the imei is correct, I might be able to help. I can't do it here though because it's against forum rules to post the info publicly. (Too many people want it for illegal use).
When you pm me, include your current bootloader and baseband. (Just so I don't have to keep coming back here for reference). Also include how it was lost and if you know how it was restored.
I know you've already posted some of this, but I get lots of PM's so it'll help me keep track of everything without going back and forth between here and there.
Also, you need to be stock for this to work, so don't flash anything else just yet.
Glad to hear you got it running again BTW!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Alright thank you
Alright, I'm happy to say that with the help of our fellow DocHoliday77 I was able to solve the issue !
Thanks everyone!
Glad you have it working.
Way to go Doc.
Damn japi2000. You did that quick good job.
Thank you!
I can't believe I went from a almost dead phone to a fully working one in only a few days, even with the 3G/4G working again !
This forum and people are amazing! Thank you!