Develop Bugs

[Fix] 4.3 ROMs stuck on splash screen after first reboot

For those of you who keep getting stuck on the splash screen after trying to restart your phone after installing a 4.3 ROM.
My steps were (and I take no credit for this, I can't remember who had said to do this and I wasn't logged in so I couldn't click the thank you button):
*Note* If you were already on the Stock 4.3 ROM you do not want to flash the 4.0.4, 4.1.1 or 4.1.2 Stock ROM since you will brick your phone. The Stock ROM contains the Bootloader which should never be downgraded. Fyi: the Bootloader is not the Baseband, the Baseband is just what Modem you're using.
1. Use Odin to flash the latest stock ROM
2. Enter the stock recovery and do a factory reset and clear the cache (I did both twice just to make sure)
3. Use Odin to flash the stock rooted ROM.
4. Enter the stock recovery and do a factory reset and clear the cache. (This might not be necessary but I did anyways just to make sure)
5. Use Odin to flash a custom recovery (TWRP 2.6.0.0 was the newest recovery when I did this last week)
6. Enter the custom recovery and wipe everything, then flash whatever 4.3 based ROM and then flash GApps if you want.
*Note* It seemed like the phone was hanging on the splash screen after either the initial boot or the first restart (I can't remember which, it's been a week) but it did boot and reboot fine.
I hope this helps out some people since I found it to be quite irritating that I could install a 4.3 ROM and set everything up but when I went to restart it would hang at the splash screen (going into the recovery and clearing the cache/dalvik cache wasn't helping).

Are you basically saying to revert back to stock settings and redo the entire root process again?
Sent from my SGH-I747 using xda app-developers app

bullet2binary said:
Are you basically saying to revert back to stock settings and redo the entire root process again?
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yeah, from what I had read that seemed to be necessary since I had used Odin to update the bootloader (MF1 since my phone is the M variant) by itself when the newest Stock ROM had come out a while ago. I still flashed the newest Stock ROM (same MF1 bootloader for the M variant) but the first time I did it I forgot to enter the Stock Recovery to do a Factory Reset and Clear the Cache and ended up stuck on the splash screen of a 4.3 ROM after flashing a custom recovery. So I needed to reflash back to stock and start over.
Going into the Stock Recovery and doing a Factory Reset and Clearing Cache is necessary and doesn't take much time at all so you may as well do it just to be sure. I also recommend backing up your IMEI if you haven't done it yet.

spongdangly said:
Yeah, from what I had read that seemed to be necessary since I had used Odin to update the bootloader (MF1 since my phone is the M variant) by itself when the newest Stock ROM had come out a while ago. I still flashed the newest Stock ROM (same MF1 bootloader for the M variant) but the first time I did it I forgot to enter the Stock Recovery to do a Factory Reset and Clear the Cache and ended up stuck on the splash screen of a 4.3 ROM after flashing a custom recovery. So I needed to reflash back to stock and start over.
Going into the Stock Recovery and doing a Factory Reset and Clearing Cache is necessary and doesn't take much time at all so you may as well do it just to be sure. I also recommend backing up your IMEI if you haven't done it yet.
Click to expand...
Click to collapse
This seems to have done the job. Running PAC 4.3 right now. I've rebooted successfully once so far.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Exactly what I ended up doing after nothing else was working. After getting it hanging the first time, even flashing 4.2 roms was giving me boot issues. After reverting back to stock and reflashing I'm now running the 9/1 Pac nightly and the 8/31 kt747 kernel.
I'm probably 10+ reboots in without issue and I flashed the kernel separately!

bullet2binary said:
This seems to have done the job. Running PAC 4.3 right now. I've rebooted successfully once so far.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
exodus454 said:
Exactly what I ended up doing after nothing else was working. After getting it hanging the first time, even flashing 4.2 roms was giving me boot issues. After reverting back to stock and reflashing I'm now running the 9/1 Pac nightly and the 8/31 kt747 kernel.
I'm probably 10+ reboots in without issue and I flashed the kernel separately!
Click to expand...
Click to collapse
I'm glad to hear that this seems to be the proper fix. That's odd that you were having trouble with 4.2 ROMs, but then again I'd been running 4.2 ROMs on my phone since they first started rolling out. It's kind of annoying that everyone's S3 seems to be slightly different then the next.

Yeah this was a weird one all right. Just glad this post had a solution
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

glad i found this otherwise my first noob post would have truly been a noob move. Thanks wouldn't have guessed that fix for a few days at least.
verified it works. but it did require some weird time dealing with a bootloop issue on stock recoveries. had to find a .tar version of CWM to flash via odin for the final result.

Still Stuck at Splash Screen after trying to upgrade to 4.3
Background:
I had been running task's rom since 4.1.x. Upgraded to 4.2 with not problems and I kept the rom current. Tried to upgrade to 4.3 and that is where the problems started. It appeared to work, saw that Google was updating a number of apps but then then I kept getting error messages regarding various about various processes stopping unexpectedly. Rebooted the phone and it came up with Task's kernel splash screen where it remains frozen.
I can get into TWRP (v2.3.3.1) recovery and into Download mode.
I have tried wiping Cache and Dalvik Cache
I have wiped System
I have done a Factory Reset
I have Formatted Data
I have used Odin twice to get back to stock (I747UCDLK3) and both times it says "passed."
When I try to reboot it, however, it comes back to Task's Kernel splash screen (I do not see the Samsung screen)
Any help or suggestions would be great.
UPDATED: Found an older update from April and was able to restore it. Still wondering why 4.3 wouldn't take.

This Works
I was skeptical, but this actually works! Now running Task's 4.3 on my bell i747m without any problems!
Thanks for the tip OP :good:

spongdangly said:
For those of you who keep getting stuck on the splash screen after trying to restart your phone after installing a 4.3 ROM.
My steps were (and I take no credit for this, I can't remember who had said to do this and I wasn't logged in so I couldn't click the thank you button):
1. Use Odin to flash the latest stock ROM
2. Enter the stock recovery and do a factory reset and clear the cache (I did both twice just to make sure)
3. Use Odin to flash the stock rooted ROM.
4. Enter the stock recovery and do a factory reset and clear the cache. (This might not be necessary but I did anyways just to make sure)
5. Use Odin to flash a custom recovery (TWRP 2.6.0.0 was the newest recovery when I did this last week)
6. Enter the custom recovery and wipe everything, then flash whatever 4.3 based ROM and then flash GApps if you want.
*Note* It seemed like the phone was hanging on the splash screen after either the initial boot or the first restart (I can't remember which, it's been a week) but it did boot and reboot fine.
I hope this helps out some people since I found it to be quite irritating that I could install a 4.3 ROM and set everything up but when I went to restart it would hang at the splash screen (going into the recovery and clearing the cache/dalvik cache wasn't helping).
I hope I posted this in the right section but apologies if it's not.
Click to expand...
Click to collapse
If this works you're a life saver! I've been posting around 4.3 threads about this for weeks and no one came up with a decent answer....
Tried reflashing stock with root but didn't work... i'll try your way, see if that works
Gonna try this tonight!!!
Thanks!

I posted in the CM thread about this, but thought I would pass it along.. I didn't have to go back to stock non-rooted. What I did:
I odin'd Mr. Robinson's LK3 rooted
Factory reset from the 3e recovery
Rebooted
Odin'd twrp
Restored nandroid of CM
Good to go.

Solved
Thanks, also works for i727 skyrocket

wont this brick people phones flashing back 4.1.1 stock ? im on stock 4.3 stuck on samsung galaxy s3 logo meaning flashing back to latest stock rom using odin 4.1.2? 4.3 stock rom or 4.3 custom roms?

Kastro1784 said:
wont this brick people phones flashing back 4.1.1 stock ? im on stock 4.3 stuck on samsung galaxy s3 logo meaning flashing back to latest stock rom using odin 4.1.2? 4.3 stock rom or 4.3 custom roms?
Click to expand...
Click to collapse
spongdangly said:
1. Use Odin to flash the latest stock ROM
Click to expand...
Click to collapse
If you were already on the Stock 4.3 ROM you do not want to flash the 4.0.4, 4.1.1 or 4.1.2 Stock ROM since you will brick your phone.
I'll add a note to the OP about not attempting to downgrade to an older Stock ROM though.

spongdangly said:
If you were already on the Stock 4.3 ROM you do not want to flash the 4.0.4, 4.1.1 or 4.1.2 Stock ROM since you will brick your phone.
I'll add a note to the OP about not attempting to downgrade to an older Stock ROM though.
Click to expand...
Click to collapse
what framware did you flash to get 4.3 back working ? a leaked 4.3 Rom with no root ? thien reflash the stock 4.3 ?

Kastro1784 said:
what framware did you flash to get 4.3 back working ? a leaked 4.3 Rom with no root ? thien reflash the stock 4.3 ?
Click to expand...
Click to collapse
When I had done this back in August, I flashed the Rogers 4.1.2 Stock ROM since that was the latest stock firmware at the time and I have a Canadian S3.
If you had already flashed or been on the Stock AT&T 4.3 ROM, I'd recommend reflashing the latest Stock AT&T 4.3 ROM and following the instructions in the OP. Just make sure that you don't attempt to flash an older version of the Stock ROM that you were already on since you will brick your phone. The Stock ROM contains the bootloader and that cannot be downgraded. I don't have an American S3 since I'm Canadian so I don't know which 4.3 bootloader is the newest although I'm sure a quick search would answer that for you.

spongdangly said:
When I had done this back in August, I flashed the Rogers 4.1.2 Stock ROM since that was the latest stock firmware at the time and I have a Canadian S3.
If you had already flashed or been on the Stock AT&T 4.3 ROM, I'd recommend reflashing the latest Stock AT&T 4.3 ROM and following the instructions in the OP. Just make sure that you don't attempt to flash an older version of the Stock ROM that you were already on since you will brick your phone. The Stock ROM contains the bootloader and that cannot be downgraded. I don't have an American S3 since I'm Canadian so I don't know which 4.3 bootloader is the newest although I'm sure a quick search would answer that for you.
Click to expand...
Click to collapse
There is no latest Stock AT&T 4.3 ROM right now to reflash if you're already on the Stock AT&T 4.3 ROM. We cannot keep telling people this. If so, tell us how, because no one has, as of yet.
I've seen entirely too many posts telling people who are having trouble or phone is soft bricked on the Stock AT&T 4.3 ROM to flash or Odin back to stock. Then when asked how, the discussion ends.
That's also one of the reasons why I refuse to upgrade to 4.3 right now. At least I can still Odin back to stock as an option if something does goes wrong, but who am I to tell anyone to stay away from the latest toy, I mean update?

shortydoggg said:
There is no latest Stock AT&T 4.3 ROM right now to reflash if you're already on the Stock AT&T 4.3 ROM. We cannot keep telling people this. If so, tell us how, because no one has, as of yet.
I've seen entirely too many posts telling people who are having trouble or phone is soft bricked on the Stock AT&T 4.3 ROM to flash or Odin back to stock. Then when asked how, the discussion ends.
That's also one of the reasons why I refuse to upgrade to 4.3 right now. At least I can still Odin back to stock as an option if something does goes wrong, but who am I to tell anyone to stay away from the latest toy, I mean update?
Click to expand...
Click to collapse
I'm sorry that I'm unable to help. As I had mentioned I have a Canadian Rogers phone (since I'm in Canada) so I don't know what's going on with the AT&T Stock 4.3 ROMs other then the fact that lots of people are having problems.
If you never flashed or did an OTA update to 4.3 then I'd suggest flashing the Stock 4.1.2 ROM. That or try what Ozark_8125 did since it saves you a couple steps (just make sure that LK3 isn't an older ROM than the one you were on).
If you're unsure what bootloader is currently on your phone and your phone is rooted I'd highly recommend downloading one of the many Root Check apps from the Play Store to verify which bootloader you're currently on.
*Note* I don't know which bootloader is for the 4.1.2 AT&T ROM nor do I know which bootloader came with the 4.3 ROMs. I'm sure a simple search would answer that for you.
Ozark_8125 said:
I posted in the CM thread about this, but thought I would pass it along.. I didn't have to go back to stock non-rooted. What I did:
I odin'd Mr. Robinson's LK3 rooted
Factory reset from the 3e recovery
Rebooted
Odin'd twrp
Restored nandroid of CM
Good to go.
Click to expand...
Click to collapse

Samsung fixed my phone free thanks for the help
Sent from my SAMSUNG-SGH-I747 using Tapatalk

[Q] Help!! ROM flashing problems

Before I get to the point let me explain what happened. I attempted to root my S3. It did work up until I got to the point where I was ready to flash a ROM and it didn't work. I received the "status 7" error on CWM and I receive an error on TWRP that means the same thing. So what I did since I couldn't restore from a backup that I would get bootloops from, I attempted to install a ROM that was .tar or md5.tar through ODIN which only worked for original firmware (given in the screenshot). I have managed to install this ROM on my phone through TWRP but unfortunately it is for TMobile and somehow my AT&T service works on it. Here is a screenshot of the phone. I have tried flashing "aokp_task650_d2lte_kitkat_6.3.2014" that is made for the AT&T S3 but no matter what I try to flash it will not flash. I have already tried doing the "ASSERTS" method but it did not work. Can someone please help me fix this issue??? :/

dreammaster252 said:
Before I get to the point let me explain what happened. I attempted to root my S3. It did work up until I got to the point where I was ready to flash a ROM and it didn't work. I received the "status 7" error on CWM and I receive an error on TWRP that means the same thing. So what I did since I couldn't restore from a backup that I would get bootloops from, I attempted to install a ROM that was .tar or md5.tar through ODIN which only worked for original firmware (given in the screenshot). I have managed to install this ROM on my phone through TWRP but unfortunately it is for TMobile and somehow my AT&T service works on it. Here is a screenshot of the phone. I have tried flashing "aokp_task650_d2lte_kitkat_6.3.2014" that is made for the AT&T S3 but no matter what I try to flash it will not flash. I have already tried doing the "ASSERTS" method but it did not work. Can someone please help me fix this issue??? :/
Click to expand...
Click to collapse
The hybrid firmware thing shouldn't really happen but for some reason, cross flashing between T999 (T-Mobile) & i747 (AT&T) sometimes happens without necessarily causing a brick. I would suggest you do a complete stock restore to AT&T 4.3JB firmware (UCUEMJB). Thereafter, you can go back to flashing your preferred custom ROM. Since you appear to be able to get to TWRP, you can first, from custom recovery, remove all existing firmware including OS and then reinstall the stock firmware. It appears the bootloader is still UCUEMJB so flashing AT&T stock firmware shouldn't be a problem. Please see the thread below for 4.3 stock restore...
http://forum.xda-developers.com/showthread.php?t=2658486

Larry2999 said:
The hybrid firmware thing shouldn't really happen but for some reason, cross flashing between T999 (T-Mobile) & i747 (AT&T) sometimes happens without necessarily causing a brick. I would suggest you do a complete stock restore to AT&T 4.3JB firmware (UCUEMJB). Thereafter, you can go back to flashing your preferred custom ROM. Since you appear to be able to get to TWRP, you can first, from custom recovery, remove all existing firmware including OS and then reinstall the stock firmware. It appears the bootloader is still UCUEMJB so flashing AT&T stock firmware shouldn't be a problem. Please see the thread below for 4.3 stock restore...
http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
So in this case, I just flash everything that it gives me correct? Is the stock ROM still rooted? If it is not then what rooting process do you suggest I go through? If it is a rooted ROM. Then do you recommend I unroot it and root it again or take some other alternative method? I really appreciate your help

dreammaster252 said:
So in this case, I just flash everything that it gives me correct? Is the stock ROM still rooted? If it is not then what rooting process do you suggest I go through? If it is a rooted ROM. Then do you recommend I unroot it and root it again or take some other alternative method? I really appreciate your help
Click to expand...
Click to collapse
It's a complete stock image which will take you to as near factory condition as you can get. This means it is unrooted. You would need to re-root after (successful) firmware installation. Prior to flashing the firmware, please remember to use custom recovery to remove all existing firmware including OS. Once you've restored the firmware, there are several ways to root but my preferred method is SafeRoot. You can find the download links and instructions to SafeRoot in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2565758
You can also try Option 2 in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2538991

Larry2999 said:
It's a complete stock image which will take you to as near factory condition as you can get. This means it is unrooted. You would need to re-root after (successful) firmware installation. Prior to flashing the firmware, please remember to use custom recovery to remove all existing firmware including OS. Once you've restored the firmware, there are several ways to root but my preferred method is SafeRoot. You can find the download links and instructions to SafeRoot in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2565758
You can also try Option 2 in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2538991
Click to expand...
Click to collapse
I am running 4.4.2 on my S3 (AOKP Task650) but unfortunately I am receiving some battery drain. Is there a Kernel I could use to prevent this and save more battery? Which Kernel do you recommend most? Also I am having issues with my Data. I get "E" for edge in a 4G LTE area? Is there a radio that I can flash or APN for this to fix that problem?

dreammaster252 said:
I am running 4.4.2 on my S3 (AOKP Task650) but unfortunately I am receiving some battery drain. Is there a Kernel I could use to prevent this and save more battery? Which Kernel do you recommend most? Also I am having issues with my Data. I get "E" for edge in a 4G LTE area? Is there a radio that I can flash or APN for this to fix that problem?
Click to expand...
Click to collapse
just to confirm, you re on ucuemjb bootloader, and installed/running Task650 4.4.4 rom 7.21.2014 (at this writing thats the latest update for the rom)
right?
sorry last time i tried to flash task650 rom, i got errors concerning the bootloader, went back to CM11 which has been my go-to-go rom and everything works fine, after you respond i will flash and get back to you on the network issues
thanks

[Q] S3 locked after 4.4.2 OTA

Here is what happened, i downloaded the OTA from AT&T, unrooted my phone and installed the update. It went all the way through, rebooted and that's where it stops. As soon as the AT&T welcome screen comes up the phone just freezes. When i plug it to my PC the phone is not recognized. Kies says it can't connect to the device. I'm able to get into download mode and odin seems to find the phone. But in download mode there is no option to reboot or anything. It only says "custom" on all options.
Can anybody help?

Factory reset usually solves most boot hangups. It will wipe your internal sd if you have stock recovery though.

i can't find any option to do a factory reset. I flashed Philz touch with odin, it said it passed. Tried a factory reset but it still freezes at the AT&T homescreen.
Any other way to do a factory reset?

Why'd you re-root BEFORE installing the update? Is there a particular reason? From what I've read on here, towelroot will easily root it afterwards.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app

keithfrombm said:
Why'd you re-root BEFORE installing the update? Is there a particular reason? From what I've read on here, towelroot will easily root it afterwards.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
I took root off the phone since most of the time root stops OTA updates. Then i downloaded and installed the update. I had plans to root it again after the update.

Hello there. I also attempted the 4.4.2 OTA from stock 4.3, and now I'm having this exact same issue. The device had TWRP recovery installed, so I re-installed the stock recovery. It was also rooted and a few system files were edited (lock sounds, hosts file), I reverted all the changes, did a full unroot via SuperSU and proceeded with the OTA. It seemed successful until it tried to boot.. it now freezes on the AT&T logo, as the OP mentioned. I installed TWRP recovery again via Odin so I could back up all the data from the phone and do a factory reset. Unfortunately, this did not fix the freezing. I've attempted reverting back to the latest official Odin .tar (4.1.1), which I've now learned is not possible since the 4.3 update and its locked bootloader. It would seem that the only thing that would do the trick now would be an Odin-flashable 4.4.2 tar. For now, I've installed CyanogenMod as a temporary solution.

I dunno if it has been tested yet but this is a TWRP/CWM flashable zip which also preserves root.
http://forum.xda-developers.com/showpost.php?p=53539462&postcount=5

It didnt work. I am currently uploading two more attempts now and will post the links in that thread as soon as they are ready.

this worked for me
Hi All, Just wanted to share a solution that worked for me. I was in the same boat. OTA update locked phone on ATT screen. Used steps 2 and 6 from link below and now have 4.4.2 running on my phone. Happy flashing.
http://forum.xda-developers.com/showthread.php?p=53574211

Stuck on first samsung note screen

Thanks for reading.
I was on stock rooted 4.3. I went back to complete stock 4.1 using odin in order to update to 4.4. i started with the first update and installed fine but wouldnt boot past the first samsung note screen. I tried to get into recovery but no success. I can get into download mode. What else can I do to get the phone booted.
thanks!

koarthur84 said:
Thanks for reading.
I was on stock rooted 4.3. I went back to complete stock 4.1 using odin in order to update to 4.4. i started with the first update and installed fine but wouldnt boot past the first samsung note screen. I tried to get into recovery but no success. I can get into download mode. What else can I do to get the phone booted.
thanks!
Click to expand...
Click to collapse
Download this and flash in odin in the ap or pda slot
http://d-h.st/iVH

terpin32 said:
Download this and flash in odin in the ap or pda slot
http://d-h.st/iVH
Click to expand...
Click to collapse
Thank You

similar
i was running slimrom 6.8 and it was working just fine. then my work email required that i encrypt the phone. phone would not encrypt. went back to stock 4.1.2 and encrypted and was running successfully. decided to OTA update and back stuck to bootscreen.
i tried other bootloaders, but this is the only that has worked. will repeat going to stock, encrypt. no more ota for me!
unless someone knows if there is an encryption friendly rom out there?

miserly said:
i was running slimrom 6.8 and it was working just fine. then my work email required that i encrypt the phone. phone would not encrypt. went back to stock 4.1.2 and encrypted and was running successfully. decided to OTA update and back stuck to bootscreen.
i tried other bootloaders, but this is the only that has worked. will repeat going to stock, encrypt. no more ota for me!
unless someone knows if there is an encryption friendly rom out there?
Click to expand...
Click to collapse
Just do the 4.4.2 updated rom like a stock touchwiz or maybe a cm rom would be able to

UCUFNE4 to UCUFNJ1 update 16 gig AT&T I747

The development for the AT&T I747 has been discontinued by the developer. Thank you for your support.
WARNING: YOU COULD BRICK YOUR PHONE
UCUFNJ1 4.4.2 incremental update contains firmware.... bootloaders and modem baseband.
MUST BE ON UCUFNE4 FIRMWARE TO CONTINUE!!! Guide can be found here. http://forum.xda-developers.com/gal...are-update-t2808654/post53984772#post53984772
This is the perfect time to use this update to return your S3 to stock for resale or whatever. Download and save these files for when you are ready to return your phone to stock.
*This is a rooted NE4 system.img, stock recovery.img and boot.img. The install script will format system and factory data reset. /media is safe.*
1. Flash restore zip in a custom recovery. CWM, TWRP, Philz. https://www.androidfilehost.com/?fid=95784891001611561
2. Boot your phone and go through setup.
3. Use triangle away and clear your counter. http://forum.xda-developers.com/galaxy-s2/orig-development/2014-01-15-triangleaway-v3-26-t1494114
4. *Optional* If you want a clean un-rooted phone for the update do this now! , Go into SuperSu >settings>full unroot.
5. Reboot your phone.
6. Search for the OTA in the about settings, download and let the phone update.
Or download this and place in the root of your phones internal storage. Reboot into recovery and select the update from update.zip https://www.androidfilehost.com/?fid=95784891001611091
Advanced users.
The original OTA cfg file. https://www.androidfilehost.com/?fid=95784891001611092
.cfg file goes in root/cache/fota
Rename the .cfg extension to .zip and you can rename it update.zip yourself or you can actually flash it in a custom recovery once renamed. if you choose not to use the stock recovery to update.
*You will loose root during the update* But the bootloader is not locked so you can still Odin your favorite recovery and flash SuperSU.
TWRP 2.8.1.0 Odin tar. http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.8.1.0-d2att.tar
SuperSU http://download.chainfire.eu/589/SuperSU/UPDATE-SuperSU-v2.16.zip?retrieve_file=1
Once you flash your favorite recovery via Odin, you need to be ready to hold the Volume Up, Power and Home button combo when Odin reboots your phone. If you don't catch it, once the OS boots it will replace recovery with the stock version. Once SuperSU is installed your recovery will stick.​
Flashable Rooted NJ1 system.img and boot.img
MD5: 6df80e42df56ddf90512f4162e645cb3
Download: https://www.androidfilehost.com/?fid=95784891001613266
Flashable NJ1 Bootloaders and modem. *Must be on NE4 bootloaders prior to flashing.*
Download: https://www.androidfilehost.com/?fid=95832962473396872

Thanks enewman for writing this up.

Doing Vice Versa Method?
Just to be clear, what if my galaxy s3 is on UCUFNJ1 and I want to go back to UCUFNE4, I can still ODIN the custom recovery and flash SuperSU?
Galaxy S3 I747
Baseband: I747UCUFNJ1

For the advanced users, should we be able to install the update without any issues? I saw in another thread that someone had installed but now their phone will not boot past the Samsung logo to anything other than a black screen.
Also, do we know what this update contains yet? Other than new bootloaders, removal of root, etc.

mattsternc said:
For the advanced users, should we be able to install the update without any issues? I saw in another thread that someone had installed but now their phone will not boot past the Samsung logo to anything other than a black screen.
Also, do we know what this update contains yet? Other than new bootloaders, removal of root, etc.
Click to expand...
Click to collapse
You know if your not wanting to return your phone to stock I really wouldn't mess with this update. Far as the user who couldn't boot... Idk I wasn't there to watch them update. This whole mess with the S3 is exhausting. We haven't got a real Odin release so I'm woking with what I can extract from my phone after updating. The system.img in ne4 zip is 100% stock except for root. So I know the update worked because I did it. Also not sure what was updated either... The kernel yes... Firmware yes, all the system apps get patched so without decompiling ne4 and nj1 apps and comparing them afraid I have no idea what the update fixes or improves.

Thanks for all you do for us S3 owners, enewman17.
If we upgrade to the new NJ1 firmware, and then flash your latest SRX Rom, I assume we cannot then use your "restore.zip" to once again go back to NE4 stock since we would be on NJ1 bootloader? If so, is there a way to go back to NJ1 stock if we later want to sell our phone?

OKAstro said:
Thanks for all you do for us S3 owners, enewman17.
If we upgrade to the new NJ1 firmware, and then flash your latest SRX Rom, I assume we cannot then use your "restore.zip" to once again go back to NE4 stock since we would be on NJ1 bootloader? If so, is there a way to go back to NJ1 stock if we later want to sell our phone?
Click to expand...
Click to collapse
I have the nj1 system dump, I'll get it uploaded so anyone who updates can restore back to stock.

enewman17 said:
I have the nj1 system dump, I'll get it uploaded so anyone who updates can restore back to stock.
Click to expand...
Click to collapse
Thanks again my man.

Towelroot no longer works after the NJ1 update. Can the CF-AutoRoot still be used? The only version at http://autoroot.chainfire.eu/ says it's for 4.0.4.

Ark42 said:
Towelroot no longer works after the NJ1 update. Can the CF-AutoRoot still be used? The only version at http://autoroot.chainfire.eu/ says it's for 4.0.4.
Click to expand...
Click to collapse
Not sure if it still works but read the op you can Odin a custom recovery then flash super su.

enewman17 said:
Not sure if it still works but read the op you can Odin a custom recovery then flash super su.
Click to expand...
Click to collapse
Yeah, I saw that, but I never had a custom recovery before, that I know of at least, and I suspect a lot of other people finding this thread in the coming days are going to be in the same boat as me. They just want SuperSU so their favorite 1 or 2 apps that require SU can continue to work.
Has anybody tried CF-AutoRoot yet on the NJ1 4.4.2?

Ark42 said:
Yeah, I saw that, but I never had a custom recovery before, that I know of at least, and I suspect a lot of other people finding this thread in the coming days are going to be in the same boat as me. They just want SuperSU so their favorite 1 or 2 apps that require SU can continue to work.
Has anybody tried CF-AutoRoot yet on the NJ1 4.4.2?
Click to expand...
Click to collapse
Agreed! I'm the same boat as you.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Ark42 said:
Yeah, I saw that, but I never had a custom recovery before, that I know of at least, and I suspect a lot of other people finding this thread in the coming days are going to be in the same boat as me. They just want SuperSU so their favorite 1 or 2 apps that require SU can continue to work.
Has anybody tried CF-AutoRoot yet on the NJ1 4.4.2?
Click to expand...
Click to collapse
Tell you what, when I get home from work I will try cfauto root and see if it works.

enewman17 said:
Not sure if it still works but read the op you can Odin a custom recovery then flash super su.
Click to expand...
Click to collapse
I can confirm this as a root method for NJ1. You were exactly right regarding immediately booting into recovery after installing TWRP thru Odin. The files provided in your links (TWRP 2.8.1.0 Odin tar. http://techerrata.com/file/twrp2/d2a....1.0-d2att.tar and
SuperSU http://download.chainfire.eu/589/Sup...etrieve_file=1)
worked exactly as stated.
A BIG thanks to you. I can't live without AdAway, TiBackup and Xposed anymore! The few days without root left me a little grumpy.
And regarding the NJ1 update as a whole...I THINK the baseband upgrade IS an actual upgrade. Since NE4, I always thought Wifi operated was somewhat choppy/throttled. THIS looks to have been improved back to ICS "standards". Re: voice, I've had a handful of dropped calls, broken up calls, and choppy data in low signal areas over the past few months on with NE4. Initial observations (albeit a tad premature) lead me to believe that this has improved as well based on a weeks worth of data use and a few calls in a "controlled" environment (the area and physical structure of my work office complex is not cellular signal friendly to begin with) I have also noticed that boot-up time has improved a bit as well. Thanks again for your efforts with the ATT GS3!

I flashed CF-Auto ROOT via Odin without success, unable to gain root access. Followed your instructions via TWRP and flashed SuperSu 2.16, my SGS3-i747 is properly rooted and functioning perfectly on UCUFNJ1. As always, thank you very kindly for all your valuable time, effort, hard work and guidance. Be well, sir!

mwrobe1 said:
I can confirm this as a root method for NJ1. You were exactly right regarding immediately booting into recovery after installing TWRP thru Odin. The files provided in your links (TWRP 2.8.1.0 Odin tar. http://techerrata.com/file/twrp2/d2a....1.0-d2att.tar and
SuperSU http://download.chainfire.eu/589/Sup...etrieve_file=1)
worked exactly as stated.
Click to expand...
Click to collapse
What version of Odin do we need to flash that TWRP, or do you have a link handy?
I've seen quite a lot of different Odins out there and don't want to brick my phone by using the wrong one.
Any pitfalls to watch out for if using TWRP for the first time? I'm sure there is going to be a bunch of people having to do this now that both CF-AutoRoot and TowelRoot doesn't work anymore.
For me, personally, I just use root for AdFree and to edit the font fallback order to properly support Japanese instead of Chinese glyphs on shared Han-unified Unicode codepoints.

Ark42 said:
What version of Odin do we need to flash that TWRP, or do you have a link handy?
I've seen quite a lot of different Odins out there and don't want to brick my phone by using the wrong one.
Any pitfalls to watch out for if using TWRP for the first time? I'm sure there is going to be a bunch of people having to do this now that both CF-AutoRoot and TowelRoot doesn't work anymore.
For me, personally, I just use root for AdFree and to edit the font fallback order to properly support Japanese instead of Chinese glyphs on shared Han-unified Unicode codepoints.
Click to expand...
Click to collapse
Use Odin 3.0.7
Not really any pitfalls to TWRP. It has an easy clean user interface and it works.
Once you have flash Super Su, in my how to ne4 update there is a flashable stock recovery. You just flash it with TWRP and once you reboot, stock recovery will be back on you phone.

Hi enewman17,
Thanks for your posts and work. I'm hoping you can help me get the new NJ1 update installed and rooted.
Here's where I'm at: AT&T SGS3 on rooted stock NE4, installed using your guides from back in June this year.
The OTA NJ1 update downloaded but failed to install (as did the NE4 OTA back then, I assume because I was rooted).
My phone still has the TWRP recovery from the previous update, so I was hoping I could install using the original OTA cfg file download from the "advanced" section in your OP so as to avoid factory reset, etc.
I downloaded the file, renamed to update.zip, and copied to my SD card. However, when I boot into TWRP and try to install it, I get an error after the system check, something like "assert failed ro.secure==1". I guess I'm doing something wrong, maybe I'm mistaken about how the original OTA is supposed to work?
Again, I'm trying to end up with a stock, but rooted, NJ1 firmware but hopefully without having to reset/lose data and settings on the phone. I don't really care right now about resale or making it look like I haven't messed with it.
Thanks for any help you can provide! Let me know if I can provide any additional details.

I am actually looking to do the exact same thing. Currently rooted, with a lot of the AT&T apps frozen via Titanium Backup.
Hope there is some way to accomplish this without returning to stock!
Thanks in advance!
Bob2014 said:
Hi enewman17,
Thanks for your posts and work. I'm hoping you can help me get the new NJ1 update installed and rooted.
Here's where I'm at: AT&T SGS3 on rooted stock NE4, installed using your guides from back in June this year.
The OTA NJ1 update downloaded but failed to install (as did the NE4 OTA back then, I assume because I was rooted).
My phone still has the TWRP recovery from the previous update, so I was hoping I could install using the original OTA cfg file download from the "advanced" section in your OP so as to avoid factory reset, etc.
I downloaded the file, renamed to update.zip, and copied to my SD card. However, when I boot into TWRP and try to install it, I get an error after the system check, something like "assert failed ro.secure==1". I guess I'm doing something wrong, maybe I'm mistaken about how the original OTA is supposed to work?
Again, I'm trying to end up with a stock, but rooted, NJ1 firmware but hopefully without having to reset/lose data and settings on the phone. I don't really care right now about resale or making it look like I haven't messed with it.
Thanks for any help you can provide! Let me know if I can provide any additional details.
Click to expand...
Click to collapse

Bob2014 said:
Hi enewman17,
Thanks for your posts and work. I'm hoping you can help me get the new NJ1 update installed and rooted.
Here's where I'm at: AT&T SGS3 on rooted stock NE4, installed using your guides from back in June this year.
The OTA NJ1 update downloaded but failed to install (as did the NE4 OTA back then, I assume because I was rooted).
My phone still has the TWRP recovery from the previous update, so I was hoping I could install using the original OTA cfg file download from the "advanced" section in your OP so as to avoid factory reset, etc.
I downloaded the file, renamed to update.zip, and copied to my SD card. However, when I boot into TWRP and try to install it, I get an error after the system check, something like "assert failed ro.secure==1". I guess I'm doing something wrong, maybe I'm mistaken about how the original OTA is supposed to work?
Again, I'm trying to end up with a stock, but rooted, NJ1 firmware but hopefully without having to reset/lose data and settings on the phone. I don't really care right now about resale or making it look like I haven't messed with it.
Thanks for any help you can provide! Let me know if I can provide any additional details.
Click to expand...
Click to collapse
I'll get my stock rooted system dump up later so you can flash in TWRP or CWM.
Do you guys want it packaged with the stock recovery?
mattsternc said:
I am actually looking to do the exact same thing. Currently rooted, with a lot of the AT&T apps frozen via Titanium Backup.
Hope there is some way to accomplish this without returning to stock!
Thanks in advance!
Click to expand...
Click to collapse