Develop Bugs

[GUIDE] AT&T CWM-flashable UCALG1 update | no wipe, leaves root and universal search

[GUIDE] AT&T CWM-flashable UCALG1 update | no wipe, leaves root and universal search
I've put together a zip file with the I747UCLG1 AT&T OTA update that can be flashed using CWM. This file
does not trip the flash counter
preserves root
does not include the Google search update to remove universal search
does not wipe /data
does require removing all themes and modifications
Standard disclaimer: I am not responsible if this bricks your phone, destroys your IMEI or kills your kids.
Prerequisites: You have to be on stock I747UCALEM for this to work. It may be rooted, but all the standard AT&T and Samsung bloatware must be there with no modifications. It's okay if some of the apps are frozen with Titanium Backup. You must not have any other mods or themes applied. The updater will check this stuff and abort if anything is wrong. I personally restored a nandroid backup I made right after rooting. If you didn't make one, you can use Odin and the instructions here to go back to stock.
To apply it:
Boot into recovery and make a nandroid backup.
Go back to AT&T UCALEM rooted stock if necessary (see above). If you're already on stock UCALEM but have framework-res.apk modications applied, you can flash this zip to restore framework-res.apk to UCALEM stock.
Make sure CWM recovery from clockworkmod.com is installed. The recovery from Team Epic will not work. You can get a zip file to flash in your current recovery to install v5.8.4.5 from here. Use one of the first two files; the ones that start with "recovery-clockwork". After you flash the zip, restart recovery through the "advanced" menu. Your recovery should say "ClockworkMod Recovery" at the top and not "CWM-based Recovery".
Put one of the zip files from below on your internal or external SD card.
Boot into recovery
Wipe cache and dalvik cache (optional?)
Flash the attached zip
(Optional) Go to Backup and Restore, Advanced Restore and restore the /data from the nandroid backup you made in step 1. If you used a nadroid backup in step 2, this should restore your data and apps. If you used Odin to flash the rooted UCALEM image, this step isn't necessary.
Reboot
Open Settings / Application Manager. Choose All tab. Click on AT&T Software update. Clear "Clear data". If you were getting OTA notifications before, this will prevent them from recurring. After doing this, your phone will know it's up-to-date.
This worked for me. I checked that my flash counter is still at 0 and Google search is still finding local stuff like apps. I still have root.
DOWNLOADS:
I747UCALG1_OTA.zip: This is the full OTA, with kernel and bootloader. You must be using the stock UCALEM kernel for this to work.
I747UCALG1_OTA_No_Bootloader.zip: This is the full OTA without the bootloader.
I747UCALG1_OTA_No_Bootloader_No_Kernel.zip: This is the OTA without the bootloader or the kernel. You can use this if you're already running a non-stock kernel.
I747UCALG1_OTA_Bootloader.zip: This is just the bootloader. You can apply this along with the "no kernel no bootloader" zip above in case you want everything but the kernel.
MODS:
This process requires the stock framework-res.apk, so at this point you'll need to reapply any mods you already applied. Here are some mods that I've rebuilt against LG1. Both are zip files you can apply through recovery.
Tether and Cell Standby Fix: This includes the mod to enable native Bluetooth and WiFi tethering from here and the fix for the incorrect reporting of Cell Standby time from here.
Tether, Cell Standby Fix, Increase Autobrightness: The same as above, but also with a mod to bump up autobrightness levels from here.
No Increasing Ring: This removes the increasing ringtone volume. The mod is from here.
OTHER PIECES:
Kernel: The UCALG1 kernel and kernel modules.
UCLG1 Modem: Just the modem from the OTA.
UCLEM Modem: The modem from the stock UCALEM firmware.
UCALG1 Bootloader
UCALG1 Bootloader (no checks): This is the LG1 bootloader will all the checks for AT&T ROMs removed from the flashing script. This can be flashed even if you're running a non AT&T ROM, but only flash it on AT&T phones!
UCALEM Bootloader
UCALEM Bootloader (no checks): This is the LEM bootloader will all the checks for AT&T ROMs removed from the flashing script. This can be flashed even if you're running a non AT&T ROM, but only flash it on AT&T phones!
LIST OF CHANGES IN OTA:
A full list of the files and partitions changed by the OTA is attached to this post.

Only 10MB? Wonder what they updated... not much need for it for me, Im on AOKP, but downloading anyways, and thanx button hit TWICE LOL
Let us know if it's a lockdown flash...

B-Naughty said:
Let us know if it's a lockdown flash...
Click to expand...
Click to collapse
Doesn't seem to be. I still have my CWM recovery and I was able to flash the KT747 Sammy kernel. The OTA did flash aboot (the bootloader?) though. It tried to flash a new recovery, but I removed that part.

drothenberger said:
Doesn't seem to be. I still have my CWM recovery and I was able to flash the KT747 Sammy kernel. The OTA did flash aboot (the bootloader?) though. It tried to flash a new recovery, but I removed that part.
Click to expand...
Click to collapse
Hmmm... guess we'll just to see what users report, but for the wise, to all, use the zip provided just in case... AND FOLLOW THE OP

when i try to do this I'm getting an error assert failed: apply_patch_check("/system/app/Flipboard.apk" E: error in sdcard/I747UCLG1_OTA.zip

dave1977nj said:
when i try to do this I'm getting an error assert failed: apply_patch_check("/system/app/Flipboard.apk" E: error in sdcard/I747UCLG1_OTA.zip
Click to expand...
Click to collapse
Did you remove Flipboard or install an update?
You have to be on stock UCALEM. The OTA applies binary patches to a bunch of apps (including Flipboard.apk), so they have to be in a specific starting state for the OTA to apply correctly.

drothenberger said:
Did you remove Flipboard or install an update?
You have to be on stock UCALEM. The OTA applies binary patches to a bunch of apps (including Flipboard.apk), so they have to be in a specific starting state for the OTA to apply correctly.
Click to expand...
Click to collapse
yes backed up from day 1 it may have auto updated can someone tell me the stock version # of flipboard or an apk would be great! so i can install it?
Thanks

dave1977nj said:
yes backed up from day 1 it may have auto updated can someone tell me the stock version # of flipboard or an apk would be great! so i can install it?
Thanks
Click to expand...
Click to collapse
Here you go.

drothenberger said:
Here you go.
Click to expand...
Click to collapse
tried that still the same error message need some help please....

Hmm, may want to consider removing the bootloader parts from the CWM until it's verified what exactly our friends at ATT had Samsung add to this. Updating bootloaders never is a good thing when it comes to ATT

dave1977nj said:
tried that still the same error message need some help please....
Click to expand...
Click to collapse
What recovery are you using? Maybe give the CWM 5.8.4.5 a try (in the OP) if you're not already using it.

pinoymutt said:
Hmm, may want to consider removing the bootloader parts from the CWM until it's verified what exactly our friends at ATT had Samsung add to this. Updating bootloaders never is a good thing when it comes to ATT
Click to expand...
Click to collapse
I've put a version without a bootloader in the OP. Worked for me after I flashed stock rooted UCALEM with Odin.

drothenberger said:
I've put a version without a bootloader in the OP. Worked for me after I flashed stock rooted UCALEM with Odin.
Click to expand...
Click to collapse
So if I'm on stock LG1 I flash rooted LEM and then flash your zip? Does your update include the baseband update ?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

mobilehavoc said:
So if I'm on stock LG1 I flash rooted LEM and then flash your zip?
Click to expand...
Click to collapse
I don't think I understand. You're already on UCALG1, but you want to apply the OTA to go from LEM to LG1? Why?
If you do want to do that, you do need to flash the rooted LEM tar through Odin. Then follow the rest of the instructions in the OP.
Does your update include the baseband update ?
Click to expand...
Click to collapse
Yup. It includes everything except the Google search update, recovery, and (optionally) the bootloader.

I"m a bi confused too, but from a different perspective.
I am completely stock; got upgraded today to UCALG1. I am interested in rooting (and then possibly applying a kernel from this forum), but not sure which method I should use based on teh fact I am now on lg1.

Odin back to pure stock working fine.. some of my apps fore close though

drothenberger said:
I've put a version without a bootloader in the OP. Worked for me after I flashed stock rooted UCALEM with Odin.
Click to expand...
Click to collapse
Many thanks! You never know what kind of goodies they like to through in new bootloaders, so better safe than sorry!

ewingr said:
I"m a bi confused too, but from a different perspective.
I am completely stock; got upgraded today to UCALG1. I am interested in rooting (and then possibly applying a kernel from this forum), but not sure which method I should use based on teh fact I am now on lg1.
Click to expand...
Click to collapse
I think there are only two ways to get rooted LG1: Start with rooted LEM and use OTA Rootkeeper to keep root when you apply the OTA or use the method in the OP. In your case, you'd have to Odin back to the rooted LEM to get root, then if you want to go back to LG1, follow the OP steps.

ewingr said:
I"m a bi confused too, but from a different perspective.
I am completely stock; got upgraded today to UCALG1. I am interested in rooting (and then possibly applying a kernel from this forum), but not sure which method I should use based on teh fact I am now on lg1.
Click to expand...
Click to collapse
Depends which method of rooting you want to use. If you are interested in the method that does not trip the counter, then yes you would flash that through ODIN (which will technically revert you back to UCLEM with root injected) and then apply the update in the OP here and in the end you should be on a a rooted UCALG1 w/o a tripped counter.

Anyone wanna pull just the baseband for cwm zip?

[Q] Official 4.3 Upgrade Issues

I was on stock, un-rooted firmware version MD5. Went ahead with the official 4.3 upgrade through KIES. Don't like it, want to go back to stock MD5. Trying to ODIN back with official FW file (not the first time I've used this) and when I start, it fails and what is weird is that it appears the bootloader is changed as well from the 4.3 update. It has 2 new lines in the upper left corner (Warranty Bit: 0 and BOOTLOADER RP SWREV: 1) Now, once the ODIN failed, another line, in all red letters on the download screen underneath those previous mentioned lines, states
SW REV CHECK FAIL : Fused 1 > Binary 0. Any ideas? Phone works 100% on this new 4.3 from TMO, just cant seem to ODIN back to 4.1.2. Any help would be super. Thanks!

phoenix98 said:
I was on stock, un-rooted firmware version MD5. Went ahead with the official 4.3 upgrade through KIES. Don't like it, want to go back to stock MD5. Trying to ODIN back with official FW file (not the first time I've used this) and when I start, it fails and what is weird is that it appears the bootloader is changed as well from the 4.3 update. It has 2 new lines in the upper left corner (Warranty Bit: 0 and BOOTLOADER RP SWREV: 1) Now, once the ODIN failed, another line, in all red letters on the download screen underneath those previous mentioned lines, states
SW REV CHECK FAIL : Fused 1 > Binary 0. Any ideas? Phone works 100% on this new 4.3 from TMO, just cant seem to ODIN back to 4.1.2. Any help would be super. Thanks!
Click to expand...
Click to collapse
Is not possible for right now, until devs will create a new root app or something like superSU or I don't know ! :crying: Same to me ...

Your Boot loader is probably secured.
Try Root66 image and get back to UVDMD5 Rooted. From there, use Doc Holiday's thread to get 4.3 upgrade.

As it stands, right now if you flashed the official firmware or OTA, you will not be able to Odin flash any previous firmware. Maybe if you were never rooted....
For now though, you shoukd still be able to flash cwm/twrp and flash another rom. you will be limited to the 4.3 modem, but otherwise should be ok to run a 4.1.2 rom.
We are working on it.
Sent from my T-Mobile MyTouch 3G Slide(HTC Espresso) using Tapatalk 2

I had the same problem
I just had this same problem and was lucky enough to fix it!!!!

vTizzle said:
I just had this same problem and was lucky enough to fix it!!!!
Click to expand...
Click to collapse
How/ What did you do you fix it? I'm stuck in a rut :l

I was trying to few things. But essentially I was trying to get back to a custom recovery so that I can flash a compatible rom. try flashing a recovery in Odin, stay away from the CWM. Flash to TW RP or something like that. I will try to help out more as soon as I get to my laptop
Sent from behind you

vTizzle said:
I was trying to few things. But essentially I was trying to get back to a custom recovery so that I can flash a compatible rom. try flashing a recovery in Odin, stay away from the CWM. Flash to TW RP or something like that. I will try to help out more as soon as I get to my laptop
Sent from behind you
Click to expand...
Click to collapse
Hm... Interestingly enough it worked! I flashed CWM 6.3.0 though, sent me straight into stock hehe :good::good: Though I'm still curious how long until I can root it

Have you tried the auto root course??
Sent from behind you

Boot recovery, then reboot system. It should ssk if you want to root.
Better yet, flash one of our roms. Or, download the supersu zip file from chainfires thread. (Or in my sig, but its not up to date)
---------- Post added at 09:12 PM ---------- Previous post was at 09:11 PM ----------
There are several ways to root. But if you don't get rid of knox iits almost pointless.

Co-author root didn't work, and nor did Root66

I'm on the same boat
Same here,
Mine was rooted, then
I Updated to Factory 4.3
Same red letters and can't get it back,
I want to 'cause it's unstable and
it has weird partition, "emulated/0"
Any Help Please !!

This is why everyone should try to search for information on anything and everything before flashing it to your device. Even if its an official update.
As stated many, many times, once you flash the 4.3 update, you cannot flash older firmware again. Roms are ok, older firmware can brick you. Your weird folder is androids implementation of user profiles if I understand it right. May as well get used to it now, I don't think its going away.
And for those interested, the root66 firmware works fine now as far as I can tell.
If you experience instability, you need to factory reset.

DocHoliday77 said:
This is why everyone should try to search for information on anything and everything before flashing it to your device. Even if its an official update.
As stated many, many times, once you flash the 4.3 update, you cannot flash older firmware again. Roms are ok, older firmware can brick you. Your weird folder is androids implementation of user profiles if I understand it right. May as well get used to it now, I don't think its going away.
And for those interested, the root66 firmware works fine now as far as I can tell.
If you experience instability, you need to factory reset.
Click to expand...
Click to collapse
If I did softbrick it, is there anyway to restore it?

You can try first wiping just dalvik and cache, then try factory reset.

Other ROMs
DocHoliday77 said:
This is why everyone should try to search for information on anything and everything before flashing it to your device. Even if its an official update.
As stated many, many times, once you flash the 4.3 update, you cannot flash older firmware again. Roms are ok, older firmware can brick you. Your weird folder is androids implementation of user profiles if I understand it right. May as well get used to it now, I don't think its going away.
And for those interested, the root66 firmware works fine now as far as I can tell.
If you experience instability, you need to factory reset.
Click to expand...
Click to collapse
Thank you Doc , It has been said ..Over and over and over.. OTA 4.3 update means you cannot flash older firmware again! I was one of the lucky that waited and installed you ROM and it has been stable . I placed a few Mods like Apps For 4.3 TW
For those just refused to READ and have NOT done a OTA update to 4.3 Like DocHoliday77 and and many have said .. here goes one more time..
WARNING!!!
If you have NOT updated via the official firmware or OTA update, it is highly recommended that you do NOT do so at this time!
You can still run these roms and gain every advantage, with none of the problems!
There so many other 4.3 ROMs to play with DocHolidays, Sarahai, mrRobinson and now aamir123. . YOu just to READ before run in head first into the OTA.

I have been trying to keep up with all the 4.3 update stuff but its just so hard with 15 different threads and it being updated everyday. I stupidly updated OTA 4.3 before coming on here and reading and it blows! Samsung is stupid for releasing such a unpolished update. But besides the point, I have been having a problem with out going calls, and battery life. When I will press to call someone the call ends instantly and I have to restart phone for it to allow me to call out. Has anyone else had this problem?
Also, are we any closer to getting 4.3 rooted? I know developers are having problems with Knox etc? If not is there anything I can do to make this update better or do I just have to suck it up? Thanks for the help guys.
I alrdy talked to people at samsung and complained beyond belief, but I dont think the out sourced help desk person understood me.

I made it !!
How ?
1. Uninstall KNOX with Titanium.
2. Flash CWM twice (first one failed), Now I have CWM.
3. Download T999UVDMD5 (Deodexed)
4. Flash it via CWM.
5. Voilà !!
Now It has the partition as it comes from Factory !.
It's there a version similar to this one, running on Android 4.3 (Stock Deodexed, Without KNOX) ?

DocHoliday77 said:
You can try first wiping just dalvik and cache, then try factory reset.
Click to expand...
Click to collapse
So I have a question Doc, I know I posted about this in the CM11 unofficial thread as well, but I am running your Non-Knox, CiQ free version and I have CWM installed, and I'm perfectly rooted after I updated SuperSU from the Play Store, but when I try to CWM Flash a rom it throws an error about the ro.bootloader and it lists out all the older bootloaders. So what I guess I'm getting to is what would it take to use the new bootloaders with any of the ROMs?

bentheexo said:
So I have a question Doc, I know I posted about this in the CM11 unofficial thread as well, but I am running your Non-Knox, CiQ free version and I have CWM installed, and I'm perfectly rooted after I updated SuperSU from the Play Store, but when I try to CWM Flash a rom it throws an error about the ro.bootloader and it lists out all the older bootloaders. So what I guess I'm getting to is what would it take to use the new bootloaders with any of the ROMs?
Click to expand...
Click to collapse
If you have updated to official 4.3 by any means then don't try to downgrade your boot loader and rom as it may brick device
If you have not taken official update then it depends what is your current boot loader and what rom you are trying to flash
So if you are sure that you haven't gone for official update then you flash dmd5 firmware then try to flash rom
Be sure before doing anything
Sent from my SGH-T999 using Tapatalk

[Q] Plz Help 4.3 down to 4.1.2. rooted tried a few

So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon

mentorkyrom said:
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
Click to expand...
Click to collapse
The 4.3 OTA installed a locked bootloader, which will prevent you from ODIN'ing back to a previous version. you can flash any ROM you would like from recovery, you CANNOT downgrade the bootloader. As of right now, if you have knox, you are stuck with it.
You are extremely lucky that you didn't brick your phone by using odin to flash a non-4.3 tar. I wouldnt try again.
My advice is, remain rooted with a custom recovery, and find a ROM to your liking, and flash that.
I have also heard that we cannot flash custom kernels on the knox (MK3) bootloader as well, but I havent verified that.

eletendre84 said:
The 4.3 OTA installed a locked bootloader, which will prevent you from ODIN'ing back to a previous version. you can flash any ROM you would like from recovery, you CANNOT downgrade the bootloader. As of right now, if you have knox, you are stuck with it.
You are extremely lucky that you didn't brick your phone by using odin to flash a non-4.3 tar. I wouldnt try again.
My advice is, remain rooted with a custom recovery, and find a ROM to your liking, and flash that.
I have also heard that we cannot flash custom kernels on the knox (MK3) bootloader as well, but I havent verified that.
Click to expand...
Click to collapse
Thank you for the response. Is CyanogenMod an option then? If I go to CM could I flash back a stock 4.3 rom in the future?
As an added bonus question does CM allow wifi tethering?
Again thank you for the response.

mentorkyrom said:
Thank you for the response. Is CyanogenMod an option then? If I go to CM could I flash back a stock 4.3 rom in the future?
As an added bonus question does CM allow wifi tethering?
Again thank you for the response.
Click to expand...
Click to collapse
CM is certainly an option. In fact, its what i am running now. CM11 12-24. Runs great. You can always odin the stock mk3 tar and go back to stock unrooted, at any time.
in order to flash cm11 you MUST be on TWRP 2.6.3.1 or CWM 6.0.4.5 or newer or the assert check will fail.
not sure on the tethering, but im pretty sure it definitely works on cm10.2 and i think it does on 11 as well, but dont quote me on that.

eletendre84 said:
CM is certainly an option. In fact, its what i am running now. CM11 12-24. Runs great. You can always odin the stock mk3 tar and go back to stock unrooted, at any time.
in order to flash cm11 you MUST be on TWRP 2.6.3.1 or CWM 6.0.4.5 or newer or the assert check will fail.
not sure on the tethering, but im pretty sure it definitely works on cm10.2 and i think it does on 11 as well, but dont quote me on that.
Click to expand...
Click to collapse
Tethering is available on CM11 just like it was on 10.2; would strongly recommend latest Philz Touch Recovery over either TWRP or CWM though. Although it is based on CWM, it has proven to be pretty much the superior recovery option for flashing any Android build number, plus it is highly customizable.
Philz Touch Recovery

this is how to downgrade
mentorkyrom said:
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
Click to expand...
Click to collapse
do a factory data reset then use odin auto root from computer ok...... after boot u will get a security message supersu will be unfortunately stopping this is ok..... then u will need to download the supersu.app to root of sd then manually install this will update it and now u can turn off knox and have root... then go to market and download odin mobile then flash your .tar file u want and you will be good to go 4.1.2 doesn't have knox and has a unlocked bootloader so have fun bro this method may work for other phones

smuther22 said:
do a factory data reset then use odin auto root from computer ok...... after boot u will get a security message supersu will be unfortunately stopping this is ok..... then u will need to download the supersu.app to root of sd then manually install this will update it and now u can turn off knox and have root... then go to market and download odin mobile then flash your .tar file u want and you will be good to go 4.1.2 doesn't have knox and has a unlocked bootloader so have fun bro this method may work for other phones
Click to expand...
Click to collapse
Do you realize that this thread hasn't been used in a couple of months? I would assume the author has no more need of advice based on the inactivity. Also, once Knox is installed, it is on the phone to stay. PERIOD. NO DOWNGRADING POSSIBLE VIA ODIN. Custom ROMs of any build are fine via custom recovery, but any attempt to change the bootloader will trigger Knox and brick the phone. Dangerous info to be posting here, especially since someone else who doesn't know better might try this.

[Q] No carrier/SIM support after 4.3 stock restore

My ATT SGH-i747 was rooted and running 4.4.2 until an OTA this past weekend soft-bricked the phone. Phone would boot to a blank screen but still allowed access to download and recovery modes, thankfully.
With help from this awesome forum, and a stock 4.3 flash via ODIN, thanks to enewman17's epic efforts and thread , the phone is back, but now won't recognize the SIM - and baseband version is "unknown" - I suspect I need to now go up to 4.4.2 to get the hw recognized by the sw. Went to ATT and they put a new SIM in but to no avail
CWM recovery is gone, but I can reload that easily enough...
Do I need to just flash the modem, or is the bootloader involved too?
Is there a single flash or .zip that will get the ROM (incl CSC and Modem) up to 4.4.2 in one shot?
I never really wanted to go this deep but here I am so now I'm looking for advice or direction as there are so many directions to look... thanks in advance!

Mismatch in firmware
Digging deeper, using Phone Info *Samsung*, I have noted the following
bootloader version: I747UCUFNJ1
baseband version: <blank>
pda version: I747UCUEMJB
csc version: I747ATTEMJB
skip a bit...
modem version: <blank>
hardware revision: <blank>
mobile operator name: <blank>
mobile network code: <blank>
So it would seem I have a mis-match of versions, where it seems all should be the same..
Would it be safe to flash to MJB following this thread?
http://forum.xda-developers.com/galaxy-s3-att/general/ucuemjb-to-ucufne4-firmware-update-t2808654

OCTANEJUNKIE said:
My ATT SGH-i747 was rooted and running 4.4.2 until an OTA this past weekend soft-bricked the phone. Phone would boot to a blank screen but still allowed access to download and recovery modes, thankfully.
With help from this awesome forum, and a stock 4.3 flash via ODIN, thanks to enewman17's epic efforts and thread , the phone is back, but now won't recognize the SIM - and baseband version is "unknown" - I suspect I need to now go up to 4.4.2 to get the hw recognized by the sw. Went to ATT and they put a new SIM in but to no avail
CWM recovery is gone, but I can reload that easily enough...
Do I need to just flash the modem, or is the bootloader involved too?
Is there a single flash or .zip that will get the ROM (incl CSC and Modem) up to 4.4.2 in one shot?
I never really wanted to go this deep but here I am so now I'm looking for advice or direction as there are so many directions to look... thanks in advance!
Click to expand...
Click to collapse
Your modem (baseband) appears to have been compromised in the process of downgrading from Kitkat. You could try either of the following solutions...
1) Flash the UCUEMJB modem via custom recovery to return you to complete stock 4.3. You can see the modem file here ....
https://www.androidfilehost.com/?fid=23269279319197285
2) Do a complete stock restore to 4.4.2. You can find the stock update zip via the following thread ...
http://forum.xda-developers.com/galaxy-s3-att/general/ucuemjb-to-ucufne4-firmware-update-t2808654
If you can reflash the 4.3MJB modem, you can check to see if you can get an OTA update to 4.4.2. Using Option 2 requires you to be on complete stock 4.3 so this may not work if you currently don't have the baseband/modem. I would strongly advise you stick to the custom recovery flashable files for now and avoid Odin. You would, however, need to restore custom recovery via Odin.
Hope this works for you.

Larry2999 said:
Your modem (baseband) appears to have been compromised in the process of downgrading from Kitkat. You could try either of the following solutions...
1) Flash the UCUEMJB modem via custom recovery to return you to complete stock 4.3. You can see the modem file here ....
https://www.androidfilehost.com/?fid=23269279319197285
2) Do a complete stock restore to 4.4.2. You can find the stock update zip via the following thread ...
http://forum.xda-developers.com/galaxy-s3-att/general/ucuemjb-to-ucufne4-firmware-update-t2808654
If you can reflash the 4.3MJB modem, you can check to see if you can get an OTA update to 4.4.2. Using Option 2 requires you to be on complete stock 4.3 so this may not work if you currently don't have the baseband/modem. I would strongly advise you stick to the custom recovery flashable files for now and avoid Odin. You would, however, need to restore custom recovery via Odin.
Hope this works for you.
Click to expand...
Click to collapse
Thanks for the detailed reply with links, Larry :good:
So I guess my plan of actions will be
1) re-install custom recovery w CWM to my external SD card as was previous
-do I *need* later version of CWM? Previous one of mine was 6.0.2.3, IIRC, that is what I can easily flash back to the phone
2) install .zip (from https://www.androidfilehost.com/?fid=23269279319197285) via CWM
If that doesn't work, I was interested in the S3Rx ROM vs. a stock 4.4.2 ROM - is there any way to go straight to a custom 4.4.2 ROM or should I get the modem working in 4.3 first?
Lastly, Where can I find a later version of a CW Recovery Touch .tar to flash via ODIN? (third stoopid noob question in this post, I know...)

Attempt to flash d2att_I747UCUEMJB_bootloader_modem_4.3.zip via CWM Recovery FAILED with Status 7, Installation aborted...
Bootloader version: I747UCUFNJ1
Baseband version: <blank>
Blank stare into space...

OCTANEJUNKIE said:
Attempt to flash d2att_I747UCUEMJB_bootloader_modem_4.3.zip via CWM Recovery FAILED with Status 7, Installation aborted...
Bootloader version: I747UCUFNJ1
Baseband version: <blank>
Blank stare into space...
Click to expand...
Click to collapse
You aren't the first to have this issue. This is why I am still on NE4 and did not take the OTA to NJ1. The update is pointless anyway, all it does is patch the kernel so towelroot won't work anymore aside from updating the bootloader.
Since your bootloader is NJ1, that is your firmware which cannot be downgraded. If you try, you will brick. You have to work with NJ1 files here only. Sure you can flash older modems, but stick to NJ1. I suggest using ODIN to flash a custom recovery, then use enewman17's NJ1 .zip file in said recovery to reflash all the NJ1 stuff. Then do a complete factory reset. You might need to flash stock recovery to do the hard factory data reset, as I am not sure if it can be done in CWM or TWRP.
In the future, I suggest freezing the update and not upgrading until people on here do it and report how it's working or rather not working in this case.

StoneyJSG said:
You aren't the first to have this issue. This is why I am still on NE4 and did not take the OTA to NJ1. The update is pointless anyway, all it does is patch the kernel so towelroot won't work anymore aside from updating the bootloader.
Since your bootloader is NJ1, that is your firmware which cannot be downgraded. If you try, you will brick. You have to work with NJ1 files here only. Sure you can flash older modems, but stick to NJ1. I suggest using ODIN to flash a custom recovery, then use enewman17's NJ1 .zip file in said recovery to reflash all the NJ1 stuff. Then do a complete factory reset. You might need to flash stock recovery to do the hard factory data reset, as I am not sure if it can be done in CWM or TWRP.
In the future, I suggest freezing the update and not upgrading until people on here do it and report how it's working or rather not working in this case.
Click to expand...
Click to collapse
Thanks for the response, Stoney :good:
I have CWM and TeamEpic v5 on external SD, so a version of custom recovery is there (CWM 6.0.2.3) - but do you have a link to enewman17's NJ1 .zip /recovery?
As far as freezing the updates in the future, yes. I tried to keep the OTA push from happening, apparently not ardently enough :crying:

OCTANEJUNKIE said:
Thanks for the response, Stoney :good:
I have CWM and TeamEpic v5 on external SD, so a version of custom recovery is there (CWM 6.0.2.3) - but do you have a link to enewman17's NJ1 .zip /recovery?
As far as freezing the updates in the future, yes. I tried to keep the OTA push from happening, apparently not ardently enough :crying:
Click to expand...
Click to collapse
Not a problem, glad to help when I can. I THINK this is the link you need: http://forum.xda-developers.com/galaxy-s3-att/general/ucufne4-to-ucufnj1-update-t2941792
You might want to post in that thread asking if it works when you are already on NJ1 though, or get a hold of enewman17 via PM or something.

SOLVED!
enewman17 posted NJ1 modem .zip here, and now me has modem and cellular service again!
Question: can I update the thread tag from [Q] to [SOLVED] myself?

Try editing your original post.

audit13 said:
Try editing your original post.
Click to expand...
Click to collapse
Yup... Done [emoji222] [emoji222] [emoji222]

[Q] Help with going back to stock (from CM11)

Hey, sup?
I need your help, I'm trying to go back to stock firmware on my i747, currently I'm running CM11 latest snapshot.
Background: Some time ago, I accidently erased my imei. Took the phone to a guy who restored it but the phone doesn't work with 3G now, only 2G. So I wanted to try going back to stock firmware to see if that fixes the issue.
I tried downloading the CUEMJB file from here, but it doesn't work (keeps looping the same page) http://androidromupdate.com/att-samsung-galaxy-s3-sgh-i747-odin-stock-firmware/
Can you help me? Also, it is safe what I'm trying to do?
Thank you!

Triple check to make sure the imei displayed in About Device matches exactly to the one on the sticker under the battery.
If it does, and after you get stock working again, PM me and I can probably help.
As for the looping, do you mean the Web page? Just get the stock files from enewman17's thread. It's either in General or Development, can't remember for sure. Probably General.
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Triple check to make sure the imei displayed in About Device matches exactly to the one on the sticker under the battery.
If it does, and after you get stock working again, PM me and I can probably help.
As for the looping, do you mean the Web page? Just get the stock files from enewman17's thread. It's either in General or Development, can't remember for sure. Probably General.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Thank you. Yes the IMEI matches.
I was able to download the file.
Unfortunately, the thing didn't went ok. After flashing my phone is unresponsive, black screen, no more boot
If I connect it to the computer at this point, it tries to search for a QHSUSB_DLOAD driver. Not sure what is that, I think I bricked my phone.
I've seen some guides for unbricking by placing a sd card in the phone at boot but so far it haven't worked

Going to one of the 4.4.2 bootloaders and modems for your device may fix the issue, maybe without going back to stock. But I do recall that a return to stock has been required by many. If you are on newer bootloader and modem than 4.3, do not use a 4.3 (MJB) file no matter the source. As Doc said use one of the releases by enewman17 that you can flash in your custom recovery, NE4 is here. enewman17 also has threads for MJB, NJ1, and NJ2 stock ROMs; all of these are flashed in a custom recovery. With the i747 I have continually seen it recommended that you upgrade bootloader and modem sequentially, that is upgrade to NE4 before going to NJ1, and NJ1 before going to NJ2. I can provide links to enewmans other threads if necessary.
BTW, the 4.3 release was not a full rom, it was an update/patch. Files I have seen run 100 mb or less. If that is the file you want, and can use w/o bricking your device see this thread http://forum.xda-developers.com/showthread.php?t=2722660 Only use it if you are on 4.1.1, 4.1.2, or 4.3 bootloader and modem.
Another way to get a 4.3 Odin flashable update is here. You must be on 4.1.1 or 4.1.2 bootloader and modem to use this as instructed.

dawgdoc said:
Going to one of the 4.4.2 bootloaders and modems for your device may fix the issue, maybe without going back to stock. But I do recall that a return to stock has been required by many. If you are on newer bootloader and modem than 4.3, do not use a 4.3 (MJB) file no matter the source. As Doc said use one of the releases by enewman17 that you can flash in your custom recovery, NE4 is here. enewman17 also has threads for MJB, NJ1, and NJ2 stock ROMs; all of these are flashed in a custom recovery. With the i747 I have continually seen it recommended that you upgrade bootloader and modem sequentially, that is upgrade to NE4 before going to NJ1, and NJ1 before going to NJ2. I can provide links to enewmans other threads if necessary.
BTW, the 4.3 release was not a full rom, it was an update/patch. Files I have seen run 100 mb or less. If that is the file you want, and can use w/o bricking your device see this thread http://forum.xda-developers.com/showthread.php?t=2722660 Only use it if you are on 4.1.1, 4.1.2, or 4.3 bootloader and modem.
Another way to get a 4.3 Odin flashable update is here. You must be on 4.1.1 or 4.1.2 bootloader and modem to use this as instructed.
Click to expand...
Click to collapse
Thank you very much.
But I'm with a phone that doesn't boot now. What would you recommend to do if there's something to bring it back

Alright! I just tried the SD card method w/ one of the files in the threads linked. Phone boots!
So it seems my bootloader is bad right?

japi2000 said:
Thank you very much.
But I'm with a phone that doesn't boot now. What would you recommend to do if there's something to bring it back
Click to expand...
Click to collapse
Can you get into recovery? If so you can flash the appropriate stock rom by enewman17.
Do you recall what bootloader and modem you were on? If you have TWRP as your recovery there are terminal commands you can use within the recovery to determine your bl/modem versions. This may also hold true for CWM and Philz Recoveries, but I don't know for certain.
If you can not get to recovery you may need to put a debrick image on an external sdcard to boot and then restore your device.

dawgdoc said:
Can you get into recovery? If so you can flash the appropriate stock rom by enewman17.
Do you recall what bootloader and modem you were on? If you have TWRP as your recovery there are terminal commands you can use within the recovery to determine your bl/modem versions. This may also hold true for CWM and Philz Recoveries, but I don't know for certain.
If you can not get to recovery you may need to put a debrick image on an external sdcard to boot and then restore your device.
Click to expand...
Click to collapse
Yes sir. With the SD card method I managed to boot the phone. Yay!
I don't recall bootloader and modem unfortunately. I know I was using CM11 one of the latest snapshots for d2lte.
I have access to download mode. Screen reads bootloader RP SWREV:2
I have access to recovery (its a basic one though). Reads Android system recovery <3e>
What do you recommend from here?

japi2000 said:
Yes sir. With the SD card method I managed to boot the phone. Yay!
I don't recall bootloader and modem unfortunately. I know I was using CM11 one of the latest snapshots for d2lte.
I have access to download mode. Screen reads bootloader RP SWREV:2
I have access to recovery (its a basic one though). Reads Android system recovery <3e>
What do you recommend from here?
Click to expand...
Click to collapse
That is the stock recovery. If you were successfully running one of the latest CM11 snapshots, you were probably on one of the three 4.4.2 bootloaders ( and modems ), they are NE4, NJ1, and NJ2. This would explain why the MJB (4.3) image you downloaded and flashed would soft brick your phone. It looks like that flash may be responsible for you being back on stock recovery, at best guess. Before anything else, do a factory reset from the stock recovery. This is frequently necessary to boot when going from a CM/AOSP LP rom back to stock.
Since you can get to download mode, I think the best bet would be to install a custom recovery. TWRP for the i747 is here, the top image is flashable with Odin while in download mode. Remember not to reboot from Odin. Instead remove the cable, pull the battery, then boot straight to recovery. Once you have TWRP loaded, boot into recovery and use the terminal emulator in it to determine bootloader and modem with these commands:
Code:
getprop ro.bootloader
getprop | grep version.baseband
Once you know the version of bootloader and modem you had been on, reflash that version from TWRP you will probably need the file on an external sdcard to do so. After this you can flash your rom of choice from TWRP, stock or otherwise. Since you were having imei issues go with one of enewman's stock roms, as @DocHoliday77 suggested. He can then help you with the imei issues if still necessary. Any other ideas Doc?

Ok, so
Bootloader = I747UCUEMJB
I don't get anything when running getprop | grep version.baseband in the recovery.
This is what I've done so far.
Booted w/ the sdcard trick (bootloader in the sdcard).
Installed twrp
Installed the following files:
AT&T_I747UCUEMJB.zip
d2att_I747UCUEMJB_bootloader.zip
d2att_I747UCUEMJB_modem.zip
d2att_Kernel_Stock_init.d_4_3_MJB_v1.0.zip
That brought the phone to life again (w/ stock 4.3). Then I flashed CM12 from the recovery. All went ok.
Problem is, I still don't have 3G connectivity, only edge.
What would you recommend try next?
Thank you

Alright, I was able to upgrade to UCUFNJ1 for both the bootloader and baseband. Still no 3G. Ideas?

Pm me. As I said before, if the imei is correct, I might be able to help. I can't do it here though because it's against forum rules to post the info publicly. (Too many people want it for illegal use).
When you pm me, include your current bootloader and baseband. (Just so I don't have to keep coming back here for reference). Also include how it was lost and if you know how it was restored.
I know you've already posted some of this, but I get lots of PM's so it'll help me keep track of everything without going back and forth between here and there.
Also, you need to be stock for this to work, so don't flash anything else just yet.
Glad to hear you got it running again BTW!
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Pm me. As I said before, if the imei is correct, I might be able to help. I can't do it here though because it's against forum rules to post the info publicly. (Too many people want it for illegal use).
When you pm me, include your current bootloader and baseband. (Just so I don't have to keep coming back here for reference). Also include how it was lost and if you know how it was restored.
I know you've already posted some of this, but I get lots of PM's so it'll help me keep track of everything without going back and forth between here and there.
Also, you need to be stock for this to work, so don't flash anything else just yet.
Glad to hear you got it running again BTW!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Alright thank you

Alright, I'm happy to say that with the help of our fellow DocHoliday77 I was able to solve the issue !
Thanks everyone!

Glad you have it working.
Way to go Doc.

Damn japi2000. You did that quick good job.

Thank you!
I can't believe I went from a almost dead phone to a fully working one in only a few days, even with the 3G/4G working again !
This forum and people are amazing! Thank you!