I was on stock, un-rooted firmware version MD5. Went ahead with the official 4.3 upgrade through KIES. Don't like it, want to go back to stock MD5. Trying to ODIN back with official FW file (not the first time I've used this) and when I start, it fails and what is weird is that it appears the bootloader is changed as well from the 4.3 update. It has 2 new lines in the upper left corner (Warranty Bit: 0 and BOOTLOADER RP SWREV: 1) Now, once the ODIN failed, another line, in all red letters on the download screen underneath those previous mentioned lines, states
SW REV CHECK FAIL : Fused 1 > Binary 0. Any ideas? Phone works 100% on this new 4.3 from TMO, just cant seem to ODIN back to 4.1.2. Any help would be super. Thanks!
phoenix98 said:
I was on stock, un-rooted firmware version MD5. Went ahead with the official 4.3 upgrade through KIES. Don't like it, want to go back to stock MD5. Trying to ODIN back with official FW file (not the first time I've used this) and when I start, it fails and what is weird is that it appears the bootloader is changed as well from the 4.3 update. It has 2 new lines in the upper left corner (Warranty Bit: 0 and BOOTLOADER RP SWREV: 1) Now, once the ODIN failed, another line, in all red letters on the download screen underneath those previous mentioned lines, states
SW REV CHECK FAIL : Fused 1 > Binary 0. Any ideas? Phone works 100% on this new 4.3 from TMO, just cant seem to ODIN back to 4.1.2. Any help would be super. Thanks!
Click to expand...
Click to collapse
Is not possible for right now, until devs will create a new root app or something like superSU or I don't know ! :crying: Same to me ...
Your Boot loader is probably secured.
Try Root66 image and get back to UVDMD5 Rooted. From there, use Doc Holiday's thread to get 4.3 upgrade.
As it stands, right now if you flashed the official firmware or OTA, you will not be able to Odin flash any previous firmware. Maybe if you were never rooted....
For now though, you shoukd still be able to flash cwm/twrp and flash another rom. you will be limited to the 4.3 modem, but otherwise should be ok to run a 4.1.2 rom.
We are working on it.
Sent from my T-Mobile MyTouch 3G Slide(HTC Espresso) using Tapatalk 2
I had the same problem
I just had this same problem and was lucky enough to fix it!!!!
vTizzle said:
I just had this same problem and was lucky enough to fix it!!!!
Click to expand...
Click to collapse
How/ What did you do you fix it? I'm stuck in a rut :l
I was trying to few things. But essentially I was trying to get back to a custom recovery so that I can flash a compatible rom. try flashing a recovery in Odin, stay away from the CWM. Flash to TW RP or something like that. I will try to help out more as soon as I get to my laptop
Sent from behind you
vTizzle said:
I was trying to few things. But essentially I was trying to get back to a custom recovery so that I can flash a compatible rom. try flashing a recovery in Odin, stay away from the CWM. Flash to TW RP or something like that. I will try to help out more as soon as I get to my laptop
Sent from behind you
Click to expand...
Click to collapse
Hm... Interestingly enough it worked! I flashed CWM 6.3.0 though, sent me straight into stock hehe :good::good: Though I'm still curious how long until I can root it
Have you tried the auto root course??
Sent from behind you
Boot recovery, then reboot system. It should ssk if you want to root.
Better yet, flash one of our roms. Or, download the supersu zip file from chainfires thread. (Or in my sig, but its not up to date)
---------- Post added at 09:12 PM ---------- Previous post was at 09:11 PM ----------
There are several ways to root. But if you don't get rid of knox iits almost pointless.
Co-author root didn't work, and nor did Root66
I'm on the same boat
Same here,
Mine was rooted, then
I Updated to Factory 4.3
Same red letters and can't get it back,
I want to 'cause it's unstable and
it has weird partition, "emulated/0"
Any Help Please !!
This is why everyone should try to search for information on anything and everything before flashing it to your device. Even if its an official update.
As stated many, many times, once you flash the 4.3 update, you cannot flash older firmware again. Roms are ok, older firmware can brick you. Your weird folder is androids implementation of user profiles if I understand it right. May as well get used to it now, I don't think its going away.
And for those interested, the root66 firmware works fine now as far as I can tell.
If you experience instability, you need to factory reset.
DocHoliday77 said:
This is why everyone should try to search for information on anything and everything before flashing it to your device. Even if its an official update.
As stated many, many times, once you flash the 4.3 update, you cannot flash older firmware again. Roms are ok, older firmware can brick you. Your weird folder is androids implementation of user profiles if I understand it right. May as well get used to it now, I don't think its going away.
And for those interested, the root66 firmware works fine now as far as I can tell.
If you experience instability, you need to factory reset.
Click to expand...
Click to collapse
If I did softbrick it, is there anyway to restore it?
You can try first wiping just dalvik and cache, then try factory reset.
Other ROMs
DocHoliday77 said:
This is why everyone should try to search for information on anything and everything before flashing it to your device. Even if its an official update.
As stated many, many times, once you flash the 4.3 update, you cannot flash older firmware again. Roms are ok, older firmware can brick you. Your weird folder is androids implementation of user profiles if I understand it right. May as well get used to it now, I don't think its going away.
And for those interested, the root66 firmware works fine now as far as I can tell.
If you experience instability, you need to factory reset.
Click to expand...
Click to collapse
Thank you Doc , It has been said ..Over and over and over.. OTA 4.3 update means you cannot flash older firmware again! I was one of the lucky that waited and installed you ROM and it has been stable . I placed a few Mods like Apps For 4.3 TW
For those just refused to READ and have NOT done a OTA update to 4.3 Like DocHoliday77 and and many have said .. here goes one more time..
WARNING!!!
If you have NOT updated via the official firmware or OTA update, it is highly recommended that you do NOT do so at this time!
You can still run these roms and gain every advantage, with none of the problems!
There so many other 4.3 ROMs to play with DocHolidays, Sarahai, mrRobinson and now aamir123. . YOu just to READ before run in head first into the OTA.
I have been trying to keep up with all the 4.3 update stuff but its just so hard with 15 different threads and it being updated everyday. I stupidly updated OTA 4.3 before coming on here and reading and it blows! Samsung is stupid for releasing such a unpolished update. But besides the point, I have been having a problem with out going calls, and battery life. When I will press to call someone the call ends instantly and I have to restart phone for it to allow me to call out. Has anyone else had this problem?
Also, are we any closer to getting 4.3 rooted? I know developers are having problems with Knox etc? If not is there anything I can do to make this update better or do I just have to suck it up? Thanks for the help guys.
I alrdy talked to people at samsung and complained beyond belief, but I dont think the out sourced help desk person understood me.
I made it !!
How ?
1. Uninstall KNOX with Titanium.
2. Flash CWM twice (first one failed), Now I have CWM.
3. Download T999UVDMD5 (Deodexed)
4. Flash it via CWM.
5. Voilà !!
Now It has the partition as it comes from Factory !.
It's there a version similar to this one, running on Android 4.3 (Stock Deodexed, Without KNOX) ?
DocHoliday77 said:
You can try first wiping just dalvik and cache, then try factory reset.
Click to expand...
Click to collapse
So I have a question Doc, I know I posted about this in the CM11 unofficial thread as well, but I am running your Non-Knox, CiQ free version and I have CWM installed, and I'm perfectly rooted after I updated SuperSU from the Play Store, but when I try to CWM Flash a rom it throws an error about the ro.bootloader and it lists out all the older bootloaders. So what I guess I'm getting to is what would it take to use the new bootloaders with any of the ROMs?
bentheexo said:
So I have a question Doc, I know I posted about this in the CM11 unofficial thread as well, but I am running your Non-Knox, CiQ free version and I have CWM installed, and I'm perfectly rooted after I updated SuperSU from the Play Store, but when I try to CWM Flash a rom it throws an error about the ro.bootloader and it lists out all the older bootloaders. So what I guess I'm getting to is what would it take to use the new bootloaders with any of the ROMs?
Click to expand...
Click to collapse
If you have updated to official 4.3 by any means then don't try to downgrade your boot loader and rom as it may brick device
If you have not taken official update then it depends what is your current boot loader and what rom you are trying to flash
So if you are sure that you haven't gone for official update then you flash dmd5 firmware then try to flash rom
Be sure before doing anything
Sent from my SGH-T999 using Tapatalk
Related
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
mentorkyrom said:
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
Click to expand...
Click to collapse
The 4.3 OTA installed a locked bootloader, which will prevent you from ODIN'ing back to a previous version. you can flash any ROM you would like from recovery, you CANNOT downgrade the bootloader. As of right now, if you have knox, you are stuck with it.
You are extremely lucky that you didn't brick your phone by using odin to flash a non-4.3 tar. I wouldnt try again.
My advice is, remain rooted with a custom recovery, and find a ROM to your liking, and flash that.
I have also heard that we cannot flash custom kernels on the knox (MK3) bootloader as well, but I havent verified that.
eletendre84 said:
The 4.3 OTA installed a locked bootloader, which will prevent you from ODIN'ing back to a previous version. you can flash any ROM you would like from recovery, you CANNOT downgrade the bootloader. As of right now, if you have knox, you are stuck with it.
You are extremely lucky that you didn't brick your phone by using odin to flash a non-4.3 tar. I wouldnt try again.
My advice is, remain rooted with a custom recovery, and find a ROM to your liking, and flash that.
I have also heard that we cannot flash custom kernels on the knox (MK3) bootloader as well, but I havent verified that.
Click to expand...
Click to collapse
Thank you for the response. Is CyanogenMod an option then? If I go to CM could I flash back a stock 4.3 rom in the future?
As an added bonus question does CM allow wifi tethering?
Again thank you for the response.
mentorkyrom said:
Thank you for the response. Is CyanogenMod an option then? If I go to CM could I flash back a stock 4.3 rom in the future?
As an added bonus question does CM allow wifi tethering?
Again thank you for the response.
Click to expand...
Click to collapse
CM is certainly an option. In fact, its what i am running now. CM11 12-24. Runs great. You can always odin the stock mk3 tar and go back to stock unrooted, at any time.
in order to flash cm11 you MUST be on TWRP 2.6.3.1 or CWM 6.0.4.5 or newer or the assert check will fail.
not sure on the tethering, but im pretty sure it definitely works on cm10.2 and i think it does on 11 as well, but dont quote me on that.
eletendre84 said:
CM is certainly an option. In fact, its what i am running now. CM11 12-24. Runs great. You can always odin the stock mk3 tar and go back to stock unrooted, at any time.
in order to flash cm11 you MUST be on TWRP 2.6.3.1 or CWM 6.0.4.5 or newer or the assert check will fail.
not sure on the tethering, but im pretty sure it definitely works on cm10.2 and i think it does on 11 as well, but dont quote me on that.
Click to expand...
Click to collapse
Tethering is available on CM11 just like it was on 10.2; would strongly recommend latest Philz Touch Recovery over either TWRP or CWM though. Although it is based on CWM, it has proven to be pretty much the superior recovery option for flashing any Android build number, plus it is highly customizable.
Philz Touch Recovery
this is how to downgrade
mentorkyrom said:
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
Click to expand...
Click to collapse
do a factory data reset then use odin auto root from computer ok...... after boot u will get a security message supersu will be unfortunately stopping this is ok..... then u will need to download the supersu.app to root of sd then manually install this will update it and now u can turn off knox and have root... then go to market and download odin mobile then flash your .tar file u want and you will be good to go 4.1.2 doesn't have knox and has a unlocked bootloader so have fun bro this method may work for other phones
smuther22 said:
do a factory data reset then use odin auto root from computer ok...... after boot u will get a security message supersu will be unfortunately stopping this is ok..... then u will need to download the supersu.app to root of sd then manually install this will update it and now u can turn off knox and have root... then go to market and download odin mobile then flash your .tar file u want and you will be good to go 4.1.2 doesn't have knox and has a unlocked bootloader so have fun bro this method may work for other phones
Click to expand...
Click to collapse
Do you realize that this thread hasn't been used in a couple of months? I would assume the author has no more need of advice based on the inactivity. Also, once Knox is installed, it is on the phone to stay. PERIOD. NO DOWNGRADING POSSIBLE VIA ODIN. Custom ROMs of any build are fine via custom recovery, but any attempt to change the bootloader will trigger Knox and brick the phone. Dangerous info to be posting here, especially since someone else who doesn't know better might try this.
I think i Have bricked my phone I was on the new 4.4 I flashed back to [ROM][RESTORE][5-12-13]Back to UNROOTED Stock with Auto Flash Count Reset .. And then was taking the OTA back to 4.3. When it rebooted it gets stuck on the Samsung note2 screen and sits there. I can't get intoo any kind of recovery it brings up the connect to kies screen that says Firmware Upgrade encountered an issue connect to kies. I have tried flashing recovery again with odin to no avail I have also tried flashing the unbrick.tar file that is floating aroung here. I cant get anything to flash everything fails. I can get into download mode.. PLEASE HELP!!!!
jyerly said:
I think i Have bricked my phone I was on the new 4.4 I flashed back to [ROM][RESTORE][5-12-13]Back to UNROOTED Stock with Auto Flash Count Reset .. And then was taking the OTA back to 4.3. When it rebooted it gets stuck on the Samsung note2 screen and sits there. I can't get intoo any kind of recovery it brings up the connect to kies screen that says Firmware Upgrade encountered an issue connect to kies. I have tried flashing recovery again with odin to no avail I have also tried flashing the unbrick.tar file that is floating aroung here. I cant get anything to flash everything fails. I can get into download mode.. PLEASE HELP!!!!
Click to expand...
Click to collapse
Looks like your having the same issue I was having. Check the 4.4 update thread about rwilco's modified restore. The one with the sboot or boot.ini in it works. Trust me It works I just got my phone back to 4.3 then back up to 4.4. If u have any questions pm me.
puffyjello said:
Looks like your having the same issue I was having. Check the 4.4 update thread about rwilco's modified restore. The one with the sboot or boot.ini in it works. Trust me It works I just got my phone back to 4.3 then back up to 4.4. If u have any questions pm me.
Click to expand...
Click to collapse
puffyjello,
what version of Odin did you use? reboot checked/unchecked?
ive used three different versions and have been unsuccessful in getting out of the samsung logo screen.
im having the same problems as the OP.
thanks for the help!!!
arichter35 said:
puffyjello,
what version of Odin did you use? reboot checked/unchecked?
ive used three different versions and have been unsuccessful in getting out of the samsung logo screen.
im having the same problems as the OP.
thanks for the help!!!
Click to expand...
Click to collapse
If it's the Samsung screen u need to go into factory recovery and do a factory reset. If u stuck at the note 2 screen u need to use odin and use the modified restore that was posted on the 4.4 update discussion thread. i think i used odin 3.4 or something. Ill turn my computer on to see.
---------- Post added at 04:25 AM ---------- Previous post was at 04:11 AM ----------
arichter35 said:
puffyjello,
what version of Odin did you use? reboot checked/unchecked?
ive used three different versions and have been unsuccessful in getting out of the samsung logo screen.
im having the same problems as the OP.
thanks for the help!!!
Click to expand...
Click to collapse
ok to make things short as possible. i dont want this discussion to get out of hand and i will be as helpful as possible. I was stuck on the samsung note 2 screen. i couldnt get past it. tried everything for like 2 days and then rwilco12 posted his modified 4.3 restore on page 50 of the Note II - the 4.4.2 update - discussion thread. all i did was flash that through Odin3 v3.04. just reboot checked on PDA. nothing else. when it rebooted it took a while but it booted to the samsung screen that changes colors. it stuck there so what i did was reboot into recovery mode and did a factory reset. after that it booted into 4.3 no problems.
---------- Post added at 05:06 AM ---------- Previous post was at 04:25 AM ----------
arichter35 said:
puffyjello,
what version of Odin did you use? reboot checked/unchecked?
ive used three different versions and have been unsuccessful in getting out of the samsung logo screen.
im having the same problems as the OP.
thanks for the help!!!
Click to expand...
Click to collapse
Any progress?
puffyjello said:
Looks like your having the same issue I was having. Check the 4.4 update thread about rwilco's modified restore. The one with the sboot or boot.ini in it works. Trust me It works I just got my phone back to 4.3 then back up to 4.4. If u have any questions pm me.
Click to expand...
Click to collapse
Up and running thank you!
jyerly said:
Up and running thank you!
Click to expand...
Click to collapse
Your welcome. Glad i could help. what about you arichter35??
It worked!
Thank you!!
If I go back to mc2 through billards file to get all the ota's in order will go through the same bs? If so, I will use the other method that was posted using the ota 4.4.2 file on XDA...
I appreciate all the help!
Sent from my SPH-L900 using XDA Free mobile app
arichter35 said:
It worked!
Thank you!!
If I go back to mc2 through billards file to get all the ota's in order will go through the same bs? If so, I will use the other method that was posted using the ota 4.4.2 file on XDA...
I appreciate all the help!
Sent from my SPH-L900 using XDA Free mobile app
Click to expand...
Click to collapse
Honestly I'm not quite sure. What u could do is use billards mc2 then ota to 4.3 and when u reboot if u soft brick again just use the modified restore again. If u want to try it go ahead no harm in trying. i might try it later but chances are its going to fail anyways. Since downgrading from 4.4 is what caused the problem in the first place.
puffyjello said:
Honestly I'm not quite sure. What u could do is use billards mc2 then ota to 4.3 and when u reboot if u soft brick again just use the modified restore again. If u want to try it go ahead no harm in trying. i might try it later but chances are its going to fail anyways. Since downgrading from 4.4 is what caused the problem in the first place.
Click to expand...
Click to collapse
Puffyjello,
I simply flashed the OTA 4.4.2 in stock recovery and rebooted to the update no problem. No new Odin's of MK4 or anything, just flashed the OTA after i used your method to unbrick.
I then Odin'd Philz, flashed SuperSu and now im rooted and on 4.4.2, no problems.
Again, thanks for the help with the 'unbricking'!
arichter35 said:
Puffyjello,
I simply flashed the OTA 4.4.2 in stock recovery and rebooted to the update no problem. No new Odin's of MK4 or anything, just flashed the OTA after i used your method to unbrick.
I then Odin'd Philz, flashed SuperSu and now im rooted and on 4deeded problems.
Again, thanks for the help with the 'unbricking'!
Click to expand...
Click to collapse
Np. And what I thought u meant was going back to mc2 from 4.4 then ota to 4.3 and see if it bricks again. I wasnt sure if it would. Ne ways I'm glad everything's fixed. And I hope anybody that has this problem follows what fixed our phones. you guys take care. Running stock deodexed ne2 and loving it. Can't wait to try out their s5feat rom when they release it.
Does the LJC_Stock_With_Count_Reset[FINAL].zip still work after ota 4.4.2 ?
This to me is the best back to unrooted stock. It resores the LJC PIT, kernel, and modem. Compared to all the other stock roms; I find this one read and writes easier with QPST & CDMA-ws.
Im currently running stock rooted MC2 with stock LJ1 baseband.
In my opinion so far this is the recipe for this phone. Oldest basebands seem to have better battery life. I'm not really sure if the newer modems are actually faster causing the battery to drain faster, or generate more compression and share more detailed information with big brother which would also cause it to slow down.
I have this theory the manufacturers purposely slow peoples equipment down with the OTA after the first couple years to motivate them to buy the newer model flagships that supports the same software more efficiently. maybe I'm just crazy but can someone please try the back to LJC stock unrooted. and let me know if it works better than the back to stock MC2.
plus it could possibly be better doing all the OTA to 4.4.2 from an older stock rom.
Rooted/Flashed my phone a long time. Constant bugs and errors. I really don't remember what all I did but I think I almost have it completely unrooted and back to stock. However, I can't update OTA. I've reflashed using this file, http://forum.xda-developers.com/showthread.php?t=2658486. Fixed just about all my issues and I actually have a lot of space on my phone. When I try to do the OTA Update, it doesn't install the update. Once it boots into recovery mode to install the update it gives an error. Can someone help my to 100% fully get my phone back to stock and be able to install OTA updates? I'm clueless.
First, did the 4.4.2 ota fail after a certain percentage? If so you may actually be partially updated already. If so, flashing MJB firmware/bootloader will hard brick.
Install and open Terminal Emulator and enter this:
getprop ro.bootloader
If it says MJB, you are still on 4.3 and can refresh that. If it says NE4, do not flash MJB!
If you can still flash MJB, there is a thread in General (I think that's where) that has the Odin flashable firmware package. Flash that with Odin and factory reset. Then try the OTA.
Factory resetting with stock recovery installed will wipe internal sd card, so back up first!
There are also a few threads in General that can help you update if the OTA continues to fail.
I'm unrooted. At least im pretty sure of that. I cant run superu anumore and root checker says im not rooted. Can I still access the terminal without being rooted. I know I had clockeork mod recovery. I also had used cyanogen mod at one point. Now I have the stock recovery but when I boot into recovery I get an error. I will post the error and install percentage as soon as the ota update downloads.
Yes, you can still run getprop w/o root. Just install terminal emulator by jackpal from the play store.
Yeah it said I747UCUEMJB. Like I said my recovery gives me an error. When I try flashing at all with odin it fails. Trying to install the ota update now. After it fails ill give the error recovery gives me. OTA update fails at 24%
Ok, booting into Android system recovery gives me a no command error than it shows the list of options. When I go to reboot system now, it gives me a no command error as well. Download mode used to give me an error, might only show up when attempting to flash something. However, these are the details of my ODIN Mode right now.
Product Name: SGH-I747
Custom Binary Download: Yes (1 Counts)
Current Binary Custom
System Status: Custom
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOADER RP SWREV: 2
When you try to flash the firmware with Odin, what does it say in the message box?
Have you tried flashing TWRP via Odin?
A lot of people seem to be having issues with the OTA failing at 20-something percent. No idea why though. I know some found that their firmware was partially updated afterwards though, which is why they couldn't flash with Odin. Need to know what odin says about the failure to know for sure though.
You might need to factory reset btw.
I've already did a factory reset when I flashed this latest rom from that thread I posted.
Point me in the right direction of the firmware I need. I've got AT&T btw.
Try MJB firmware again. Im assuming that's what you tried to flash with odin earlier right? When/if it fails again, copy the text from the message box and paste it here.
So you want me to try flashing using Odin with that firmware I provided in that link? Like I said, ODIN on the pc gives me an error. I'll provide the error later when I get off work. Before I just put the firmware on my sd card, went into refovery mode and installed it from there.
From what I can see that is for flashing in recovery only. Of in only flashes .tar and .tar.md5 files.
This is the stock MJB firmware you can use in Odin:
http://www.androidfilehost.com/?fid=23329332407590581
Its from enewman17 in his how to update thread here (step 4):
http://forum.xda-developers.com/showthread.php?p=53563776
If you still want to update to 4.4.2, that thread has had a pretty good success rate from what I've seen.
Let me know if you have any ither questions about this.
I'll try ut as soon as I get home from work and posy my results. Thanks for the help so far!
Wow I think one of the reasons I couldn't use ODIN after trying to unroot, is because I never had turned on USB Debugging mode. You wanted me to just go through Step 4 for right now right? Just to get back to stock 4.3 AT&T S3 like right out the box?
Thanks so much Doc. After following step 4 on that thread I was able to Ota update!
DocHoliday77 said:
From what I can see that is for flashing in recovery only. Of in only flashes .tar and .tar.md5 files.
This is the stock MJB firmware you can use in Odin:
http://www.androidfilehost.com/?fid=23329332407590581
Its from enewman17 in his how to update thread here (step 4):
http://forum.xda-developers.com/showthread.php?p=53563776
If you still want to update to 4.4.2, that thread has had a pretty good success rate from what I've seen.
Let me know if you have any ither questions about this.
Click to expand...
Click to collapse
Been using my newly updated S3 and now the Touchwiz Home stops on startup and resets my default app settings repeatedly. Not sure what's the deal, tried suggestions on diff sites and am trying a factory restore, wipe date, and wipe cache partition. Any clue how to fix this?
PS: Seen in Android System Recovery it says KOT49H.I747UFNE4. Should that be I747UCEMJB since that's what mine is and recovery still gives me no command when I start it up?
You said you had updated with the OTA so NE4 would be correct.
As for recovery, if you want to keep stock recovery, enewman17 has it available in one of his threads (in development section I think). Redland that by itself and it ought to be good to go.
Otherwise, use Odin to flash TWRP recovery.
Factory reset should take care of the launcher/home issue you mentioned. You may not be able to though since it sounds like recovery is corrupted. Fix recovery as I said above and then try the reset.
If you factory reset with stock recovery installed, it will wipe your internal sd card. With custom recovery it will not.
You could also try clearing data for Touchwiz Home in application management.
I am having issues updating OTA too. It gets to 100% and then says my phone will reboot in 5 seconds, then it reboots and some at&t logo with a % counter comes up, that gets to 100% then it reboots into Android and it still says 4.3...what am I doing wrong? Anyone have any advice? Many thanks if so.
Thats a new one for me...how exactly are you going about updating? Are you using one of the threads here? Have you recently modified anything?
DocHoliday77 said:
Thats a new one for me...how exactly are you going about updating? Are you using one of the threads here? Have you recently modified anything?
Click to expand...
Click to collapse
I am trying to update by going to settings --> more --> about device --> software update. Not using a thread, no. I was rooted and uninstalled google books and newsstand then unrooted and did a factory reset in stock recovery because I found out that if you are rooted the OTA update won't take. I am 100% bone stock now except for the 2 bloatware apps I uninstalled. I have since reinstalled them via the play store , but I hear they need to be system apps?
They do, but they also need to be the same versions that were originally included. If you get them from the store they'll be updated and will cause the ota to fail.
Hey, sup?
I need your help, I'm trying to go back to stock firmware on my i747, currently I'm running CM11 latest snapshot.
Background: Some time ago, I accidently erased my imei. Took the phone to a guy who restored it but the phone doesn't work with 3G now, only 2G. So I wanted to try going back to stock firmware to see if that fixes the issue.
I tried downloading the CUEMJB file from here, but it doesn't work (keeps looping the same page) http://androidromupdate.com/att-samsung-galaxy-s3-sgh-i747-odin-stock-firmware/
Can you help me? Also, it is safe what I'm trying to do?
Thank you!
Triple check to make sure the imei displayed in About Device matches exactly to the one on the sticker under the battery.
If it does, and after you get stock working again, PM me and I can probably help.
As for the looping, do you mean the Web page? Just get the stock files from enewman17's thread. It's either in General or Development, can't remember for sure. Probably General.
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Triple check to make sure the imei displayed in About Device matches exactly to the one on the sticker under the battery.
If it does, and after you get stock working again, PM me and I can probably help.
As for the looping, do you mean the Web page? Just get the stock files from enewman17's thread. It's either in General or Development, can't remember for sure. Probably General.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Thank you. Yes the IMEI matches.
I was able to download the file.
Unfortunately, the thing didn't went ok. After flashing my phone is unresponsive, black screen, no more boot
If I connect it to the computer at this point, it tries to search for a QHSUSB_DLOAD driver. Not sure what is that, I think I bricked my phone.
I've seen some guides for unbricking by placing a sd card in the phone at boot but so far it haven't worked
Going to one of the 4.4.2 bootloaders and modems for your device may fix the issue, maybe without going back to stock. But I do recall that a return to stock has been required by many. If you are on newer bootloader and modem than 4.3, do not use a 4.3 (MJB) file no matter the source. As Doc said use one of the releases by enewman17 that you can flash in your custom recovery, NE4 is here. enewman17 also has threads for MJB, NJ1, and NJ2 stock ROMs; all of these are flashed in a custom recovery. With the i747 I have continually seen it recommended that you upgrade bootloader and modem sequentially, that is upgrade to NE4 before going to NJ1, and NJ1 before going to NJ2. I can provide links to enewmans other threads if necessary.
BTW, the 4.3 release was not a full rom, it was an update/patch. Files I have seen run 100 mb or less. If that is the file you want, and can use w/o bricking your device see this thread http://forum.xda-developers.com/showthread.php?t=2722660 Only use it if you are on 4.1.1, 4.1.2, or 4.3 bootloader and modem.
Another way to get a 4.3 Odin flashable update is here. You must be on 4.1.1 or 4.1.2 bootloader and modem to use this as instructed.
dawgdoc said:
Going to one of the 4.4.2 bootloaders and modems for your device may fix the issue, maybe without going back to stock. But I do recall that a return to stock has been required by many. If you are on newer bootloader and modem than 4.3, do not use a 4.3 (MJB) file no matter the source. As Doc said use one of the releases by enewman17 that you can flash in your custom recovery, NE4 is here. enewman17 also has threads for MJB, NJ1, and NJ2 stock ROMs; all of these are flashed in a custom recovery. With the i747 I have continually seen it recommended that you upgrade bootloader and modem sequentially, that is upgrade to NE4 before going to NJ1, and NJ1 before going to NJ2. I can provide links to enewmans other threads if necessary.
BTW, the 4.3 release was not a full rom, it was an update/patch. Files I have seen run 100 mb or less. If that is the file you want, and can use w/o bricking your device see this thread http://forum.xda-developers.com/showthread.php?t=2722660 Only use it if you are on 4.1.1, 4.1.2, or 4.3 bootloader and modem.
Another way to get a 4.3 Odin flashable update is here. You must be on 4.1.1 or 4.1.2 bootloader and modem to use this as instructed.
Click to expand...
Click to collapse
Thank you very much.
But I'm with a phone that doesn't boot now. What would you recommend to do if there's something to bring it back
Alright! I just tried the SD card method w/ one of the files in the threads linked. Phone boots!
So it seems my bootloader is bad right?
japi2000 said:
Thank you very much.
But I'm with a phone that doesn't boot now. What would you recommend to do if there's something to bring it back
Click to expand...
Click to collapse
Can you get into recovery? If so you can flash the appropriate stock rom by enewman17.
Do you recall what bootloader and modem you were on? If you have TWRP as your recovery there are terminal commands you can use within the recovery to determine your bl/modem versions. This may also hold true for CWM and Philz Recoveries, but I don't know for certain.
If you can not get to recovery you may need to put a debrick image on an external sdcard to boot and then restore your device.
dawgdoc said:
Can you get into recovery? If so you can flash the appropriate stock rom by enewman17.
Do you recall what bootloader and modem you were on? If you have TWRP as your recovery there are terminal commands you can use within the recovery to determine your bl/modem versions. This may also hold true for CWM and Philz Recoveries, but I don't know for certain.
If you can not get to recovery you may need to put a debrick image on an external sdcard to boot and then restore your device.
Click to expand...
Click to collapse
Yes sir. With the SD card method I managed to boot the phone. Yay!
I don't recall bootloader and modem unfortunately. I know I was using CM11 one of the latest snapshots for d2lte.
I have access to download mode. Screen reads bootloader RP SWREV:2
I have access to recovery (its a basic one though). Reads Android system recovery <3e>
What do you recommend from here?
japi2000 said:
Yes sir. With the SD card method I managed to boot the phone. Yay!
I don't recall bootloader and modem unfortunately. I know I was using CM11 one of the latest snapshots for d2lte.
I have access to download mode. Screen reads bootloader RP SWREV:2
I have access to recovery (its a basic one though). Reads Android system recovery <3e>
What do you recommend from here?
Click to expand...
Click to collapse
That is the stock recovery. If you were successfully running one of the latest CM11 snapshots, you were probably on one of the three 4.4.2 bootloaders ( and modems ), they are NE4, NJ1, and NJ2. This would explain why the MJB (4.3) image you downloaded and flashed would soft brick your phone. It looks like that flash may be responsible for you being back on stock recovery, at best guess. Before anything else, do a factory reset from the stock recovery. This is frequently necessary to boot when going from a CM/AOSP LP rom back to stock.
Since you can get to download mode, I think the best bet would be to install a custom recovery. TWRP for the i747 is here, the top image is flashable with Odin while in download mode. Remember not to reboot from Odin. Instead remove the cable, pull the battery, then boot straight to recovery. Once you have TWRP loaded, boot into recovery and use the terminal emulator in it to determine bootloader and modem with these commands:
Code:
getprop ro.bootloader
getprop | grep version.baseband
Once you know the version of bootloader and modem you had been on, reflash that version from TWRP you will probably need the file on an external sdcard to do so. After this you can flash your rom of choice from TWRP, stock or otherwise. Since you were having imei issues go with one of enewman's stock roms, as @DocHoliday77 suggested. He can then help you with the imei issues if still necessary. Any other ideas Doc?
Ok, so
Bootloader = I747UCUEMJB
I don't get anything when running getprop | grep version.baseband in the recovery.
This is what I've done so far.
Booted w/ the sdcard trick (bootloader in the sdcard).
Installed twrp
Installed the following files:
AT&T_I747UCUEMJB.zip
d2att_I747UCUEMJB_bootloader.zip
d2att_I747UCUEMJB_modem.zip
d2att_Kernel_Stock_init.d_4_3_MJB_v1.0.zip
That brought the phone to life again (w/ stock 4.3). Then I flashed CM12 from the recovery. All went ok.
Problem is, I still don't have 3G connectivity, only edge.
What would you recommend try next?
Thank you
Alright, I was able to upgrade to UCUFNJ1 for both the bootloader and baseband. Still no 3G. Ideas?
Pm me. As I said before, if the imei is correct, I might be able to help. I can't do it here though because it's against forum rules to post the info publicly. (Too many people want it for illegal use).
When you pm me, include your current bootloader and baseband. (Just so I don't have to keep coming back here for reference). Also include how it was lost and if you know how it was restored.
I know you've already posted some of this, but I get lots of PM's so it'll help me keep track of everything without going back and forth between here and there.
Also, you need to be stock for this to work, so don't flash anything else just yet.
Glad to hear you got it running again BTW!
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Pm me. As I said before, if the imei is correct, I might be able to help. I can't do it here though because it's against forum rules to post the info publicly. (Too many people want it for illegal use).
When you pm me, include your current bootloader and baseband. (Just so I don't have to keep coming back here for reference). Also include how it was lost and if you know how it was restored.
I know you've already posted some of this, but I get lots of PM's so it'll help me keep track of everything without going back and forth between here and there.
Also, you need to be stock for this to work, so don't flash anything else just yet.
Glad to hear you got it running again BTW!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Alright thank you
Alright, I'm happy to say that with the help of our fellow DocHoliday77 I was able to solve the issue !
Thanks everyone!
Glad you have it working.
Way to go Doc.
Damn japi2000. You did that quick good job.
Thank you!
I can't believe I went from a almost dead phone to a fully working one in only a few days, even with the 3G/4G working again !
This forum and people are amazing! Thank you!
I was rooted on OB7 with chainfire and the stock recovery image or whatever, it's been several years, well I used superSU and unrooted the phone and it still wouldn't let me do OTA. So tonight I downloaded the OF5 Rom and updated through Odin, Now it's telling me my device status is official and it's currently downloading the next update... The issue I am wondering about now is... Since it will OTA, I want to put UN7 on my phone and I don't want to update past PJ1, will it let me stop the updates?
Curtai said:
I was rooted on OB7 with chainfire and the stock recovery image or whatever, it's been several years, well I used superSU and unrooted the phone and it still wouldn't let me do OTA. So tonight I downloaded the OF5 Rom and updated through Odin, Now it's telling me my device status is official and it's currently downloading the next update... The issue I am wondering about now is... Since it will OTA, I want to put UN7 on my phone and I don't want to update past PJ1, will it let me stop the updates?
Click to expand...
Click to collapse
You got some OTA updates to go to get to PJ1 but there's a better way. You could get the PJ1 stock tar from the stock tar thread in general forum and upgrade through Odin again.
OTA is sequential patch updates. Stock tar is full updates. I'd recommend factory reset before flashing the marshmallow update to save time on initial boot optimization.
To answer your question about stopping the updates, turn off auto update feature in Settings when you get to PJ1. Follow the ROM OP to install once you get to PJ1- however you choose.
Note: Since your bootloader is now updated beyond OB7, keep in mind you cannot use Odin to flash full tars OB7 or lower. You cannot downgrade the bootloader but it's still possible to run older ROMs. I only recommend full stock tars no older than OG5.
Sent from my SM-N920P using Tapatalk
samep said:
You got some OTA updates to go to get to PJ1 but there's a better way. You could get the PJ1 stock tar from the stock tar thread in general forum and upgrade through Odin again.
OTA is sequential patch updates. Stock tar is full updates. I'd recommend factory reset before flashing the marshmallow update to save time on initial boot optimization.
To answer your question about stopping the updates, turn off auto update feature in Settings when you get to PJ1. Follow the ROM OP to install once you get to PJ1- however you choose.
Note: Since your bootloader is now updated beyond OB7, keep in mind you cannot use Odin to flash full tars OB7 or lower. You cannot downgrade the bootloader but it's still possible to run older ROMs. I only recommend full stock tars no older than OG5.
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
So, now I am on PJ1 and I don't know how to put TWRP on my phone, I want to put tx_dbs_tx's UN7 hybrid on my phone and I am having issues both finding and putting TWRP on my phone... and I can't find a download or anything for it...
I've downloaded 2 different versions of twrp and used odin to put them on but I think I am doing something wrong because it isn't booting into twrp
Curtai said:
I was rooted on OB7 with chainfire and the stock recovery image or whatever, it's been several years, well I used superSU and unrooted the phone and it still wouldn't let me do OTA. So tonight I downloaded the OF5 Rom and updated through Odin, Now it's telling me my device status is official and it's currently downloading the next update... The issue I am wondering about now is... Since it will OTA, I want to put UN7 on my phone and I don't want to update past PJ1, will it let me stop the updates?
Click to expand...
Click to collapse
and of course I was missing a step... nobody said uncheck auto reboot and it kept keeping the bootloader locked
got it done now and I managed to get the custom rom installed... or at least I think it's working
Curtai said:
and of course I was missing a step... nobody said uncheck auto reboot and it kept keeping the bootloader locked
got it done now and I managed to get the custom rom installed... or at least I think it's working
Click to expand...
Click to collapse
Oh your talking about installing twrp? Yeah you have to not let it reboot. And when is done pull battery and boot into recovery to get it to stick. Obviously you figured it out. But just saying. I think earlier versions you didn't need to do that but now you do.
Glad you got it going. How you like the Rom? Running smooth for me.
ROM is good
Well I obviously got it going and didn't read the first couple posts after the install and didn't notice the SMS issue so I had that problem and I can't find a lot of the menu options that I had with the OB7 original I've been running for about 18 months... It's pretty smooth now and I'm wondering how fast it will fill up my internal memory I like that it's almost 20 gigs free.. for a while I was running on less than 6 I need to find an efficient way to use my external SD card... Other than that the options are neat but it seems really bloated all the extra Google apps make me sick even though I never use them... I've got titanium backup and am freezing them and will probably uninstall them soon... I want a small ROM that I can customize myself or apps that are easily removed or whatever half the apps I don't want are in ROM which is a pain to remove or I just don't know how to unless I use TB
Wow that's a novel sorry but yeah that's my ramblings for the next week I guess... Now I'm gonna hit the rack...