Develop Bugs

[Fix] 4.3 ROMs stuck on splash screen after first reboot

For those of you who keep getting stuck on the splash screen after trying to restart your phone after installing a 4.3 ROM.
My steps were (and I take no credit for this, I can't remember who had said to do this and I wasn't logged in so I couldn't click the thank you button):
*Note* If you were already on the Stock 4.3 ROM you do not want to flash the 4.0.4, 4.1.1 or 4.1.2 Stock ROM since you will brick your phone. The Stock ROM contains the Bootloader which should never be downgraded. Fyi: the Bootloader is not the Baseband, the Baseband is just what Modem you're using.
1. Use Odin to flash the latest stock ROM
2. Enter the stock recovery and do a factory reset and clear the cache (I did both twice just to make sure)
3. Use Odin to flash the stock rooted ROM.
4. Enter the stock recovery and do a factory reset and clear the cache. (This might not be necessary but I did anyways just to make sure)
5. Use Odin to flash a custom recovery (TWRP 2.6.0.0 was the newest recovery when I did this last week)
6. Enter the custom recovery and wipe everything, then flash whatever 4.3 based ROM and then flash GApps if you want.
*Note* It seemed like the phone was hanging on the splash screen after either the initial boot or the first restart (I can't remember which, it's been a week) but it did boot and reboot fine.
I hope this helps out some people since I found it to be quite irritating that I could install a 4.3 ROM and set everything up but when I went to restart it would hang at the splash screen (going into the recovery and clearing the cache/dalvik cache wasn't helping).

Are you basically saying to revert back to stock settings and redo the entire root process again?
Sent from my SGH-I747 using xda app-developers app

bullet2binary said:
Are you basically saying to revert back to stock settings and redo the entire root process again?
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yeah, from what I had read that seemed to be necessary since I had used Odin to update the bootloader (MF1 since my phone is the M variant) by itself when the newest Stock ROM had come out a while ago. I still flashed the newest Stock ROM (same MF1 bootloader for the M variant) but the first time I did it I forgot to enter the Stock Recovery to do a Factory Reset and Clear the Cache and ended up stuck on the splash screen of a 4.3 ROM after flashing a custom recovery. So I needed to reflash back to stock and start over.
Going into the Stock Recovery and doing a Factory Reset and Clearing Cache is necessary and doesn't take much time at all so you may as well do it just to be sure. I also recommend backing up your IMEI if you haven't done it yet.

spongdangly said:
Yeah, from what I had read that seemed to be necessary since I had used Odin to update the bootloader (MF1 since my phone is the M variant) by itself when the newest Stock ROM had come out a while ago. I still flashed the newest Stock ROM (same MF1 bootloader for the M variant) but the first time I did it I forgot to enter the Stock Recovery to do a Factory Reset and Clear the Cache and ended up stuck on the splash screen of a 4.3 ROM after flashing a custom recovery. So I needed to reflash back to stock and start over.
Going into the Stock Recovery and doing a Factory Reset and Clearing Cache is necessary and doesn't take much time at all so you may as well do it just to be sure. I also recommend backing up your IMEI if you haven't done it yet.
Click to expand...
Click to collapse
This seems to have done the job. Running PAC 4.3 right now. I've rebooted successfully once so far.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Exactly what I ended up doing after nothing else was working. After getting it hanging the first time, even flashing 4.2 roms was giving me boot issues. After reverting back to stock and reflashing I'm now running the 9/1 Pac nightly and the 8/31 kt747 kernel.
I'm probably 10+ reboots in without issue and I flashed the kernel separately!

bullet2binary said:
This seems to have done the job. Running PAC 4.3 right now. I've rebooted successfully once so far.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
exodus454 said:
Exactly what I ended up doing after nothing else was working. After getting it hanging the first time, even flashing 4.2 roms was giving me boot issues. After reverting back to stock and reflashing I'm now running the 9/1 Pac nightly and the 8/31 kt747 kernel.
I'm probably 10+ reboots in without issue and I flashed the kernel separately!
Click to expand...
Click to collapse
I'm glad to hear that this seems to be the proper fix. That's odd that you were having trouble with 4.2 ROMs, but then again I'd been running 4.2 ROMs on my phone since they first started rolling out. It's kind of annoying that everyone's S3 seems to be slightly different then the next.

Yeah this was a weird one all right. Just glad this post had a solution
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

glad i found this otherwise my first noob post would have truly been a noob move. Thanks wouldn't have guessed that fix for a few days at least.
verified it works. but it did require some weird time dealing with a bootloop issue on stock recoveries. had to find a .tar version of CWM to flash via odin for the final result.

Still Stuck at Splash Screen after trying to upgrade to 4.3
Background:
I had been running task's rom since 4.1.x. Upgraded to 4.2 with not problems and I kept the rom current. Tried to upgrade to 4.3 and that is where the problems started. It appeared to work, saw that Google was updating a number of apps but then then I kept getting error messages regarding various about various processes stopping unexpectedly. Rebooted the phone and it came up with Task's kernel splash screen where it remains frozen.
I can get into TWRP (v2.3.3.1) recovery and into Download mode.
I have tried wiping Cache and Dalvik Cache
I have wiped System
I have done a Factory Reset
I have Formatted Data
I have used Odin twice to get back to stock (I747UCDLK3) and both times it says "passed."
When I try to reboot it, however, it comes back to Task's Kernel splash screen (I do not see the Samsung screen)
Any help or suggestions would be great.
UPDATED: Found an older update from April and was able to restore it. Still wondering why 4.3 wouldn't take.

This Works
I was skeptical, but this actually works! Now running Task's 4.3 on my bell i747m without any problems!
Thanks for the tip OP :good:

spongdangly said:
For those of you who keep getting stuck on the splash screen after trying to restart your phone after installing a 4.3 ROM.
My steps were (and I take no credit for this, I can't remember who had said to do this and I wasn't logged in so I couldn't click the thank you button):
1. Use Odin to flash the latest stock ROM
2. Enter the stock recovery and do a factory reset and clear the cache (I did both twice just to make sure)
3. Use Odin to flash the stock rooted ROM.
4. Enter the stock recovery and do a factory reset and clear the cache. (This might not be necessary but I did anyways just to make sure)
5. Use Odin to flash a custom recovery (TWRP 2.6.0.0 was the newest recovery when I did this last week)
6. Enter the custom recovery and wipe everything, then flash whatever 4.3 based ROM and then flash GApps if you want.
*Note* It seemed like the phone was hanging on the splash screen after either the initial boot or the first restart (I can't remember which, it's been a week) but it did boot and reboot fine.
I hope this helps out some people since I found it to be quite irritating that I could install a 4.3 ROM and set everything up but when I went to restart it would hang at the splash screen (going into the recovery and clearing the cache/dalvik cache wasn't helping).
I hope I posted this in the right section but apologies if it's not.
Click to expand...
Click to collapse
If this works you're a life saver! I've been posting around 4.3 threads about this for weeks and no one came up with a decent answer....
Tried reflashing stock with root but didn't work... i'll try your way, see if that works
Gonna try this tonight!!!
Thanks!

I posted in the CM thread about this, but thought I would pass it along.. I didn't have to go back to stock non-rooted. What I did:
I odin'd Mr. Robinson's LK3 rooted
Factory reset from the 3e recovery
Rebooted
Odin'd twrp
Restored nandroid of CM
Good to go.

Solved
Thanks, also works for i727 skyrocket

wont this brick people phones flashing back 4.1.1 stock ? im on stock 4.3 stuck on samsung galaxy s3 logo meaning flashing back to latest stock rom using odin 4.1.2? 4.3 stock rom or 4.3 custom roms?

Kastro1784 said:
wont this brick people phones flashing back 4.1.1 stock ? im on stock 4.3 stuck on samsung galaxy s3 logo meaning flashing back to latest stock rom using odin 4.1.2? 4.3 stock rom or 4.3 custom roms?
Click to expand...
Click to collapse
spongdangly said:
1. Use Odin to flash the latest stock ROM
Click to expand...
Click to collapse
If you were already on the Stock 4.3 ROM you do not want to flash the 4.0.4, 4.1.1 or 4.1.2 Stock ROM since you will brick your phone.
I'll add a note to the OP about not attempting to downgrade to an older Stock ROM though.

spongdangly said:
If you were already on the Stock 4.3 ROM you do not want to flash the 4.0.4, 4.1.1 or 4.1.2 Stock ROM since you will brick your phone.
I'll add a note to the OP about not attempting to downgrade to an older Stock ROM though.
Click to expand...
Click to collapse
what framware did you flash to get 4.3 back working ? a leaked 4.3 Rom with no root ? thien reflash the stock 4.3 ?

Kastro1784 said:
what framware did you flash to get 4.3 back working ? a leaked 4.3 Rom with no root ? thien reflash the stock 4.3 ?
Click to expand...
Click to collapse
When I had done this back in August, I flashed the Rogers 4.1.2 Stock ROM since that was the latest stock firmware at the time and I have a Canadian S3.
If you had already flashed or been on the Stock AT&T 4.3 ROM, I'd recommend reflashing the latest Stock AT&T 4.3 ROM and following the instructions in the OP. Just make sure that you don't attempt to flash an older version of the Stock ROM that you were already on since you will brick your phone. The Stock ROM contains the bootloader and that cannot be downgraded. I don't have an American S3 since I'm Canadian so I don't know which 4.3 bootloader is the newest although I'm sure a quick search would answer that for you.

spongdangly said:
When I had done this back in August, I flashed the Rogers 4.1.2 Stock ROM since that was the latest stock firmware at the time and I have a Canadian S3.
If you had already flashed or been on the Stock AT&T 4.3 ROM, I'd recommend reflashing the latest Stock AT&T 4.3 ROM and following the instructions in the OP. Just make sure that you don't attempt to flash an older version of the Stock ROM that you were already on since you will brick your phone. The Stock ROM contains the bootloader and that cannot be downgraded. I don't have an American S3 since I'm Canadian so I don't know which 4.3 bootloader is the newest although I'm sure a quick search would answer that for you.
Click to expand...
Click to collapse
There is no latest Stock AT&T 4.3 ROM right now to reflash if you're already on the Stock AT&T 4.3 ROM. We cannot keep telling people this. If so, tell us how, because no one has, as of yet.
I've seen entirely too many posts telling people who are having trouble or phone is soft bricked on the Stock AT&T 4.3 ROM to flash or Odin back to stock. Then when asked how, the discussion ends.
That's also one of the reasons why I refuse to upgrade to 4.3 right now. At least I can still Odin back to stock as an option if something does goes wrong, but who am I to tell anyone to stay away from the latest toy, I mean update?

shortydoggg said:
There is no latest Stock AT&T 4.3 ROM right now to reflash if you're already on the Stock AT&T 4.3 ROM. We cannot keep telling people this. If so, tell us how, because no one has, as of yet.
I've seen entirely too many posts telling people who are having trouble or phone is soft bricked on the Stock AT&T 4.3 ROM to flash or Odin back to stock. Then when asked how, the discussion ends.
That's also one of the reasons why I refuse to upgrade to 4.3 right now. At least I can still Odin back to stock as an option if something does goes wrong, but who am I to tell anyone to stay away from the latest toy, I mean update?
Click to expand...
Click to collapse
I'm sorry that I'm unable to help. As I had mentioned I have a Canadian Rogers phone (since I'm in Canada) so I don't know what's going on with the AT&T Stock 4.3 ROMs other then the fact that lots of people are having problems.
If you never flashed or did an OTA update to 4.3 then I'd suggest flashing the Stock 4.1.2 ROM. That or try what Ozark_8125 did since it saves you a couple steps (just make sure that LK3 isn't an older ROM than the one you were on).
If you're unsure what bootloader is currently on your phone and your phone is rooted I'd highly recommend downloading one of the many Root Check apps from the Play Store to verify which bootloader you're currently on.
*Note* I don't know which bootloader is for the 4.1.2 AT&T ROM nor do I know which bootloader came with the 4.3 ROMs. I'm sure a simple search would answer that for you.
Ozark_8125 said:
I posted in the CM thread about this, but thought I would pass it along.. I didn't have to go back to stock non-rooted. What I did:
I odin'd Mr. Robinson's LK3 rooted
Factory reset from the 3e recovery
Rebooted
Odin'd twrp
Restored nandroid of CM
Good to go.
Click to expand...
Click to collapse

Samsung fixed my phone free thanks for the help
Sent from my SAMSUNG-SGH-I747 using Tapatalk

[Q] Trying to downgrade from 4.4.2 (Cyanagenmod 11) to 4.1.2 stock (T999UVDMD5)

As you'll soon discover, I'm a noob. I stupidly took the OTA update on my Samsung Galaxy S3 T-Mobile T999 from 4.1.2 to 4.3. Since doing so mine and my wife's phone (did the same thing to her also) gets in a mess after being connected to the car stereo bluetooth and prevents outgoing calls unless the phone is rebooted.
So to try to solve this, I rooted the phone and installed CM 11, so now I'm on 4.4.2. This didn't help the issue either and instead is worse at connecting to the bluetooth.
I want to get my phone back to the stock 4.1.2 rom, which I got from sammobile (PDA T999UVDMD5) or at worst back to the 4.3 stock rom (PDA T999UVUEMJC).
This morning I tried to flash T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar using ODIN 307 but it failed almost instantly with an Fail! Auth message.
I also tried to flash CM 10.1 zip on my SD card using ClockworkMod Recovery v 6.0.4.5 but again it failed almost instantly (sorry I didn't take note of the error).
So now I'm back to CM 11. So any suggestions for how to get back to either of the stock roms?

huz666 said:
As you'll soon discover, I'm a noob. I stupidly took the OTA update on my Samsung Galaxy S3 T-Mobile T999 from 4.1.2 to 4.3. Since doing so mine and my wife's phone (did the same thing to her also) gets in a mess after being connected to the car stereo bluetooth and prevents outgoing calls unless the phone is rebooted.
So to try to solve this, I rooted the phone and installed CM 11, so now I'm on 4.4.2. This didn't help the issue either and instead is worse at connecting to the bluetooth.
I want to get my phone back to the stock 4.1.2 rom, which I got from sammobile (PDA T999UVDMD5) or at worst back to the 4.3 stock rom (PDA T999UVUEMJC).
This morning I tried to flash T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar using ODIN 307 but it failed almost instantly with an Fail! Auth message.
I also tried to flash CM 10.1 zip on my SD card using ClockworkMod Recovery v 6.0.4.5 but again it failed almost instantly (sorry I didn't take note of the error).
So now I'm back to CM 11. So any suggestions for how to get back to either of the stock roms?
Click to expand...
Click to collapse
If you are getting errors in both odin and cwm, it sounds like it is a root issue. In other words, it sounds like the apps are being denied access to root and therefor cannot flash. Both odin and cwm are able to generate logs so you can tell the reason for the fail. Personally, I would recommend flasing twrp recovery instead of cwm since it seems to simplify alot and is a little better for our device. Without knowing exactly why the flash is failing, i would just recommend to try and re-root the phone again.

Did you put the phone in Downloading mode before connecting to the Odin ?
Do not try to flash 4.1.2 ever. It will brick your phone.

Perseus71 said:
Did you put the phone in Downloading mode before connecting to the Odin ?
Do not try to flash 4.1.2 ever. It will brick your phone.
Click to expand...
Click to collapse
Yes the phone was in downloading mode. I couldn't find any posts that thought that I would brick my phone for sure by downgrading so I thought I would try. Could I go back to the 4.3 Stock ROM with some degree of confidence?

Yes you can go back to 4.3 Stock.

Perseus71 said:
Yes you can go back to 4.3 Stock.
Click to expand...
Click to collapse
So I'm now back to Stock 4.3 by doing a flash via Odin. I did (stupidly) try to then go back to 4.1.2 again using Odin having put the phone in USB debugging mode first but I still got the same Auth Fail error.
Thanks for all the help.

huz666 said:
So I'm now back to Stock 4.3 by doing a flash via Odin. I did (stupidly) try to then go back to 4.1.2 again using Odin having put the phone in USB debugging mode first but I still got the same Auth Fail error.
Thanks for all the help.
Click to expand...
Click to collapse
You cannot downgrade like that once you have updated to official 4.3 firmware, no offence but why would you try it even after Perseus said not to? Anyway if you want to go back to 4.1.2 so badly just download a 4.1.2 ROM and flash it in recovery
Sent from my SGH-M919 using Tapatalk

serio22 said:
You cannot downgrade like that once you have updated to official 4.3 firmware, no offence but why would you try it even after Perseus said not to? Anyway if you want to go back to 4.1.2 so badly just download a 4.1.2 ROM and flash it in recovery
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
.
Thanks for the advice. I think I'll just quit while I'm only slightly behind now and remain on 4.3 Stock. I appreciate everyone's help and suggestions.

Downgrade from CM11 4.4.2 to 4.3 on I747
I went from 4.3 stock to CM11 on my i747 but i didnt like the update. So i am trying to go back to 4.3 however whenever i try to install the 4.3 zip file thru twrp or CWM, it fails. As far as i know there is no odin file for going back. I tried to flash rogers 4.3 file through odin (thinking i would flash at&t modem later) but that also failed.
I would appreciate any help on how to install 4.3 once 4.4.2 has been installed on an i747

You seriously need to do some reading
Sent from my SGH-T999 using Tapatalk

nitagro said:
I went from 4.3 stock to CM11 on my i747 but i didnt like the update. So i am trying to go back to 4.3 however whenever i try to install the 4.3 zip file thru twrp or CWM, it fails. As far as i know there is no odin file for going back. I tried to flash rogers 4.3 file through odin (thinking i would flash at&t modem later) but that also failed.
I would appreciate any help on how to install 4.3 once 4.4.2 has been installed on an i747
Click to expand...
Click to collapse
For One, you are on the wrong forum. This is for T-Mobile's S3 not AT&T. Second, Like @passtheknowledge said, you really need to do significant research and reading here on XDA.

Perseus71 said:
For One, you are on the wrong forum. This is for T-Mobile's S3 not AT&T. Second, Like @passtheknowledge said, you really need to do significant research and reading here on XDA.
Click to expand...
Click to collapse
I was up all night reading and trying all the suggestions that have been posted so far. Nothing worked. I would appreciate if someone can throw some light on what might be wrong.

nitagro said:
I was up all night reading and trying all the suggestions that have been posted so far. Nothing worked. I would appreciate if someone can throw some light on what might be wrong.
Click to expand...
Click to collapse
Please Read through this Thread. For Future Reference, all Odin Files for S3 in general are looked up by unique Keyword Root66. That thread is the right place for you to post errors or issues. If there's no 4.3 image for your phone there, you can post a request as well.
For your immediate Problem, there is a an alternate ATT StockMod Rom by @saranhai Please see this thread. Pay particular attention to the mandatory requirement of flashing a particular modem beforehand.

[Q] n7100 wont start after any restart

ok guys please i need a help.
I have a note n7100 i rooted since i purchased and i used to flash it with omega ROM always since 4.1.2 to 4.3.
one day i decided to try another rom so i pick up the hurricane 4.3. i flashed the ROM and it worked fine till i just rebooted the device.
once i rebooted it wont start again and stuck on the N-7100 logo. i wipe the cache and do factory rest but it wont start.
all data are gone. i had to flash again using the side-load option. to make it short since i flashed the hurricane 4.3 ROM over the Omega ROM 4.3
i have this problem i tried many time to flash it again and it will always work fine till i reboot then it wont work again. i tried to flash it with Omega 4.1.2 ROM and it worked fine even i reboot my device. but if i upgrade to 4.3 with any ROM it wont restart after rebooting. do i have a rooting problem, why its like this? i need to know a solution. its very strange that all 4.3 ROMs will work fine but once i reboot the device it wont restart and all data will be gone.
please HELP, i did not ask for your help guys till i have tried all ways.
once again ( i used to have 4.3 ROM on my n7100 and it was working fine till i decided to use the Hurricane ROM)

What is your current bootloader version? If you are using old bootloader (4.1) it will cause problem on new firmware (4.3). In this case you need to update your bootloader (mj5 is the best).
Sent from my GT-N7100 using Tapatalk

congminh1709 said:
What is your current bootloader version? If you are using old bootloader (4.1) it will cause problem on new firmware (4.3). In this case you need to update your bootloader (mj5 is the best).
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
I did already update my bootloader to md5. And it was same issue.

congminh1709 said:
What is your current bootloader version? If you are using old bootloader (4.1) it will cause problem on new firmware (4.3). In this case you need to update your bootloader (mj5 is the best).
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
I checked the version of the installed boot loader and i found it Mj5 and its the same thing. could it be due to the installed my rom via TWRP instead of Philiz....

[Q] ATT Note 2 Rooted - Unroot to stock ROM

I have tried to search and find info on this but am lost as to how to accomplish.
I am currently rooted and running the SlimRom 4.4.4 and wish to unroot and arrive at the current stock ATT rom which is 4.4.2 I believe.
I have installed the 4.1 stock rom listed on SamsMobile and it fails when I do this. In searching I think I have read that the problem is with a lated version of the boot loader not being able to go back to older versions on Android.
Is this true and is there any work around?
Thanks much!

Ok flash the 4.1.1 in odin like you did and if it doesnt boot the first time do a factory reset and let it boot for 5 mins if it doesn't still flash this and let me know if it works
http://d-h.st/qDY

[Q] Stock Note 2 Issues

I will do whatever it takes to see if my data is still there. Then I need to get my warranty replacement.
I have a completely stock Note II (AT&T SGH-i317) that I believe is at 4.3 Jelly Bean I317UCUBMK6 (or ***MJ4, I don't know the difference). OTA firmware updates have never worked for my phone since I took it out of the box. Samsung/AT&T have no download link to an official 4.3 that I could use with ODIN to reflash[?] my phone.
I have had connector and battery issues for a while and suddenly last week my phone just hung at the AT&T carrier screen when I turned it on. I tried recovery mode>clear the cache and rebooting to no avail. In recovery it had told me it was unable to mount the EFS. I also saw online that there were, in fact, old leaked roms (4.3) from before 4.3 was released. Can I "flash"[?] to one of these from 4.3 not-leaked official? Again, not trying to lose any data...
I also saw this thread and didn't know if it would help:
http://forum.xda-developers.com/showthread.php?t=2589891
Thanks and I will seriously buy you a beer or other preferred beverage/donation if you can help.

Were you rooted when this happened or want to be rooted cuz if you download a stock att rom and flash though odin it should keep everything you have on there

terpin32 said:
Were you rooted when this happened or want to be rooted cuz if you download a stock att rom and flash though odin it should keep everything you have on there
Click to expand...
Click to collapse
That's the thing though--I attempted to use ODIN with the stock 4.1.2 ROM and it failed. Then I remembered I had 4.3 installed. I can't find a stock AT&T ROM for 4.3 anywhere!

talonreaper said:
That's the thing though--I attempted to use ODIN with the stock 4.1.2 ROM and it failed. Then I remembered I had 4.3 installed. I can't find a stock AT&T ROM for 4.3 anywhere!
Click to expand...
Click to collapse
That's y the 4.1.2 wont boot download this and flash this via odin
http://d-h.st/DGZ