Hello, I am currently rooted and have CWM 6.0.4.3. installed. I'm on CM11 but want to go back to stock.. Is there an easy way to keep root and go back to stock. Want stock for a few functions that ROMS dont seem to be offering but can keep root and CWM ??
Thanks.
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
DeathNotice said:
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
Click to expand...
Click to collapse
Ok perfect, thats what I was looking for. Phone btw is S3 - d2att - SGH i747) Sounds good to install the stock rom and re-root.. I'm sure its here but I have searched everywhere to find a tutorial on this and I cannot find a straight answer.
Would you mind giving me the steps or pointing me to a thread that explains how to and has the files in need to download ?
audit13 said:
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Click to expand...
Click to collapse
Do you know if there is a step by step on this somewhere ? I dont mind going back to complete stock.. I can just re-root and flash CWM after.
OR
Maybe you could just answer the bigger question : the reason I want to go back to stock is I need to use MHL/HDMI which CM11 doesnt support. I dont want to go back to stock, I would rather even go to another ROM that supports mhl/hdmi.. but if I have to go to stock, than so be it.?
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
audit13 said:
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
Click to expand...
Click to collapse
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
robberrobbie said:
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
Click to expand...
Click to collapse
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
audit13 said:
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
Click to expand...
Click to collapse
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
robberrobbie said:
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
Click to expand...
Click to collapse
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
audit13 said:
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
Click to expand...
Click to collapse
Ok thanks, I will do that. 1 thing I'm not quite sure of is the bootloader situation ? In the first tutorial there is a note : Flashing a prior bootloader can hard/soft brick your device. How do I know ?
I see the steps as:
Extract tar file you downloaded.
Use Odin, put phone into download mode [with phone off, hold vol. down + home + power ], connect to computer and open Odin.
once in odin click the PDA field and select the tar file
Leave Auto Reboot and F. Reset Time checked.
click start and when done let phone reboot.
If you just want a stock, rooted phone with no custom recovery, no plans to flash custom roms, etc. then you can stop HERE.
For my situation, is it just that easy ?
Before flashing, verify the version of your bootloader.
audit13 said:
Before flashing, verify the version of your bootloader.
Click to expand...
Click to collapse
OK I have made an effort to go read and figure out how to find out what version of bootloader on my own.. But i cannot find ? Any chance you know... And could help?
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Hey. I got the i747m. As for what was the last stock ROM I had, can't say. I know when I bought the phone it was ICS and I had received and update to jellybean.. But them went to cm10. The tutorial I followed told me had me back everything up, which I did. Have it in a file somewhere on my comp, would that tell me ?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Ariesdroid said:
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have not seen a stock mf1 ROM that can be flashed in CWM. You could use mobile Odin to flash back to stock and then flash Philz Touch via desktop Odin later.
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
audit13 said:
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Click to expand...
Click to collapse
Hey there Audit, Sorry to bother you again, I just dont know how to move forward from here and neeeeeed some help.
I have been reading for days and days have not found a straight answer for my issue and I dont want to just go ahead and start flashing when I dont know if its the right method ?
I dont know how to get back to stock from where I'm at, I dont know how to figure out what bootloader I have (you asked me)
I have found a couple links on XDA that I can follow, I'm just not sure if they apply to my situation ?
This is a pretty detailed response/tutorial, but I dont know if I can just go ahead with this or not ?
http://forum.xda-developers.com/showthread.php?t=2186967
This is also very detailed: http://forum.xda-developers.com/showthread.php?t=1739426
Any help would be greatly appreciated !
robberrobbie said:
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
Click to expand...
Click to collapse
If you are sure you have the Rogers i747m and you have never loaded a stock Rogers 4.3 ROM onto your phone, you could use desktop Odin to flash a pre-rooted 4.1.2 ROM from here: http://forum.xda-developers.com/showthread.php?t=1739426.
Flashing the pre-rooted 4.1.2 ROM will return the phone to completely stock, wipe out all installed apps and data, and you will have root. I do not recommend flashing the Rogers 4.3 pre-rooted ROM from the link.
Once you are able to boot into the phone and set things up, you can flash Philz Touch from Odin which will give you a custom recovery on a rooted stock 4.1.2 ROM.
Related
Hey guys,
I'm trying to go back to a stock Touchwiz ROM from CyanogenMod 10.2. My only problem is, I can't Odin back to a stock from because the only Odin compatible file I have is 4.1.1 which my phone will no longer go to since my baseband was updated after trying a former 4.3 ROM.
Can anyone link me to a 4.3 ROM that I can flash in Odin? I'm asking because most of the ROM's I'm finding that are 4.3 require you to be on a TW ROM before flashing their ROM. Thanks.
n_alvarez2007 said:
Hey guys,
I'm trying to go back to a stock Touchwiz ROM from CyanogenMod 10.2. My only problem is, I can't Odin back to a stock from because the only Odin compatible file I have is 4.1.1 which my phone will no longer go to since my baseband was updated after trying a former 4.3 ROM.
Can anyone link me to a 4.3 ROM that I can flash in Odin? I'm asking because most of the ROM's I'm finding that are 4.3 require you to be on a TW ROM before flashing their ROM. Thanks.
Click to expand...
Click to collapse
Go to http://www.sammobile.com/firmwares/and put in your phone info and download the stock file.
Satstalker said:
Go to http://www.sammobile.com/firmwares/and put in your phone info and download the stock file.
Click to expand...
Click to collapse
This link is useless for me as it does not have a 4.3 stock rom listed in their official firmwares. They have only up to 4.1.2 which I cannot Odin back to since my baseband was already updated.
n_alvarez2007 said:
This link is useless for me as it does not have a 4.3 stock rom listed in their official firmwares. They have only up to 4.1.2 which I cannot Odin back to since my baseband was already updated.
Click to expand...
Click to collapse
Maybe there is no update for your carrier yet! A thanks would be nice for trying to help you. But hey next time i wont even reply
|ROM|Bootloader|Kernel|Modem| AT&T Official 4.3 MJB |24 Nov 2013| There you go all stock. make sure you hit the thanks button for everyone (not my files I just found them)
You cant flash this in odin but can use TWRP or CWM. will get you back all stock. Good luck...
theramsey3 said:
|ROM|Bootloader|Kernel|Modem| AT&T Official 4.3 MJB |24 Nov 2013| There you go all stock. make sure you hit the thanks button for everyone (not my files I just found them)
You cant flash this in odin but can use TWRP or CWM. will get you back all stock. Good luck...
Click to expand...
Click to collapse
Do I have to be on a stock rom to use this? I'm currently on Quantum V3 and I don't have access to a stock rom to revert to since my baseband was updated.
n_alvarez2007 said:
Do I have to be on a stock rom to use this? I'm currently on Quantum V3 and I don't have access to a stock rom to revert to since my baseband was updated.
Click to expand...
Click to collapse
No you don't have to be on the stock rom to use that, but the bootloaders are for 4.3 so if you haven't updated yet this will update you.
You can flash any rom you want to as long as you do not mess with the bootloader you will be OK. I do not know if this work on anything besides an at&t phone using it on anything else is done so at your own risk just the same as using it.
What about the recovery? any way to get a stock recovery image?
I tired to root my galaxy s3 but ended up bricking it for a while and all i got was the Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. After trying odin so many time i finally got it to work but now i have another issue...i put verizon 4.1 on my phone using odin instead of att. my att sim wont work and i dont know how i am going to get it back to att stock rom so i can use my phone again!!! if anyone know how to reset this please help i just got the phone and now i cant use it because it has Verizon instead of att galaxy s3 stock rom on it.:crying:
pimpjayjay said:
I tired to root my galaxy s3 but ended up bricking it for a while and all i got was the Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. After trying odin so many time i finally got it to work but now i have another issue...i put verizon 4.1 on my phone using odin instead of att. my att sim wont work and i dont know how i am going to get it back to att stock rom so i can use my phone again!!! if anyone know how to reset this please help i just got the phone and now i cant use it because it has Verizon instead of att galaxy s3 stock rom on it.:crying:
Click to expand...
Click to collapse
Did you ever flash android 4.3 on you're phone? (This is important)
Ali7000 said:
Did you ever flash android 4.3 on you're phone? (This is important)
Click to expand...
Click to collapse
it already had 4.3 i was trying to root it but the process faild and all i get is the error Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again
pimpjayjay said:
it already had 4.3 i was trying to root it but the process faild and all i get is the error Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again
Click to expand...
Click to collapse
Try these http://forum.xda-developers.com/showthread.php?t=2498233, stock at&t rooted without Knox (Believe me man, better without knox). But they are only leaks of the official firmware. I am not a professional developer so you might wanna create a new thread and ask if it's possible in you're situation.
Ali7000 said:
Try these http://forum.xda-developers.com/showthread.php?t=2498233, stock at&t rooted without Knox (Believe me man, better without knox). But they are only leaks of the official firmware. I am not a professional developer so you might wanna create a new thread and ask if it's possible in you're situation.
Click to expand...
Click to collapse
okay i will look it up and see if it works , thanks.
The Canadian and US phones are pretty similar. Maybe a Canadian rom will work?
You can find official firmware here: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
audit13 said:
The Canadian and US phones are pretty similar. Maybe a Canadian rom will work?
You can find official firmware here: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
Click to expand...
Click to collapse
No it won't work. Since it is a stock rom it most likely will not work, he won't be able to call, text, or use data.
Ali7000 said:
No it won't work. Since it is a stock rom it most likely will not work, he won't be able to call, text, or use data.
Click to expand...
Click to collapse
I wasn't sure if the OP could install some sort of stock firmware to get his phone going and then install the necessary radio.
audit13 said:
I wasn't sure if the OP could install some sort of stock firmware to get his phone going and then install the necessary radio.
Click to expand...
Click to collapse
The best choice for him is to stick to a custom rom until the AT&T 4.3 update releases.
Ali7000 said:
The best choice for him is to stick to a custom rom until the AT&T 4.3 update releases.
Click to expand...
Click to collapse
Wow. it seems as if you got people in here just giving you ODIN TARS to flash. i wouldnt listen/ flash anything than the leaked 4.3 update for att because MOST odin files have bootloader upgrades in them and if you are on 4.3 you will brick trying to restore stock
Andy_nu said:
Wow. it seems as if you got people in here just giving you ODIN TARS to flash. i wouldnt listen/ flash anything than the leaked 4.3 update for att because MOST odin files have bootloader upgrades in them and if you are on 4.3 you will brick trying to restore stock
Click to expand...
Click to collapse
Hah Yah man I've been through a lot sh**.
Sent from my SGH-I747M using XDA Premium 4 mobile app
At&t Tar files
what should i do, the tar file for Verizon still fails but it will go as far as to let my device boot but so i can at least get to recovery mode and then i can reboot it and clear system data but of courses that not what i want because it running Verizon.I is there a way to find the tar file that has at&t on it so i can try to make it work?
Ali7000 said:
Hah Yah man I've been through a lot sh**.
Sent from my SGH-I747M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
what should i do, the tar file for Verizon still fails but it will go as far as to let my device boot but so i can at least get to recovery mode and then i can reboot it and clear system data but of courses that not what i want because it running Verizon.I is there a way to find the tar file that has at&t on it so i can try to make it work?
Based on the OP, the phone is currently running Verizon's 4.1 which leads me to believe the bootloader has not been updated beyond 4.1.2 since recovery mode is accessible; therefore, I think flashing 4.11 or 4.1.2 stock roms would be fine.
As always, it's best to check the installed bootloader before proceeding with any more flashes.
I used the stock firmware from here to downgrade my Bell s3 from stock 4.1.2 to stock 4.1.1.
Stock firmware: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
pimpjayjay said:
what should i do, the tar file for Verizon still fails but it will go as far as to let my device boot but so i can at least get to recovery mode and then i can reboot it and clear system data but of courses that not what i want because it running Verizon.I is there a way to find the tar file that has at&t on it so i can try to make it work?
Click to expand...
Click to collapse
Download the ATT Image
Current I747UCDLK3 (JB 4.1.1)
http://forum.xda-developers.com/showthread.php?t=1739426
audit13 said:
Based on the OP, the phone is currently running Verizon's 4.1 which leads me to believe the bootloader has not been updated beyond 4.1.2 since recovery mode is accessible; therefore, I think flashing 4.11 or 4.1.2 stock roms would be fine.
As always, it's best to check the installed bootloader before proceeding with any more flashes.
I used the stock firmware from here to downgrade my Bell s3 from stock 4.1.2 to stock 4.1.1.
Stock firmware: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
Click to expand...
Click to collapse
i wouldnt flash the bootloader just to to be safe though. id flash the recovery from the root forum and then install a cm or aosp ROM.
or open the tar and make sure there are not bootloader related files i forgot all of them but one is mbl. something and 1,2,3 theres a post on here how to check i just dont know where
So, i decide to root my s3 because i wanted to do some cool stuff. I got odin, got the tar file and tried flashing it. For some reason it didn't work :crying: On odin it gave me a fail. I was in download mode too. So, when i turn on my s3 it is in odin mode but it says "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." i did this in kies and when it was at like 99% it gives me an error. :crying:
so i tried flashing again in odin still fail, but i get on my s3 SV REV CHECK FAIL: Fused 2 > Binary 0. I have no clue what that means, So, i just want my phone to get working again i dont care about rooting anymore. JUST HELP ME FIX IT!!!!:crying:
BTW: I di root my Kindle Fire a while back so i thought I would have experience with this (i kind of do) but i guess I thought wrong.
Was your phone running a stock 4.3 AT&T ROM? What method did you use to try and root the phone?
audit13 said:
Was your phone running a stock 4.3 AT&T ROM? What method did you use to try and root the phone?
Click to expand...
Click to collapse
i think so and i tired using odin and i put the phone in download mode so i could flash the .tar file
Resistance225 said:
i think so and i tired using odin and i put the phone in download mode so i could flash the .tar file
Click to expand...
Click to collapse
Since your phone was running a stock 4.3 ROM, you can't use Odin to install a stock AT&T 4.3 ROM because it doesn't exist. There are leaked ROMs around that you could try flashing.
Alternatively, you could install a custom recovery and install a custom 4.4.2 ROM.
audit13 said:
Since your phone was running a stock 4.3 ROM, you can't use Odin to install a stock AT&T 4.3 ROM because it doesn't exist. There are leaked ROMs around that you could try flashing.
Alternatively, you could install a custom recovery and install a custom 4.4.2 ROM.
Click to expand...
Click to collapse
I will try to do this! Thanks for helping me though, i will keep you updated. :fingers-crossed:
audit13 said:
Since your phone was running a stock 4.3 ROM, you can't use Odin to install a stock AT&T 4.3 ROM because it doesn't exist. There are leaked ROMs around that you could try flashing.
Alternatively, you could install a custom recovery and install a custom 4.4.2 ROM.
Click to expand...
Click to collapse
I installed a recovery and guess what, it started working again! All my data was still there too! Thanks i really appreciate you taking the time to help me! I also was able to succsessfully root it by using the CF auto root .tar file. Once again, thanks a ton!
Resistance225 said:
I installed a recovery and guess what, it started working again! All my data was still there too! Thanks i really appreciate you taking the time to help me! I also was able to succsessfully root it by using the CF auto root .tar file. Once again, thanks a ton!
Click to expand...
Click to collapse
Glad you got it working. We're all here to help.
Hey guys, I've been searching for a couple hours now and have came up empty handed.
I'm trying to find a stock rooted ROM for my Sasktel i747m (baseband/bootloader= MF1] . I already have the Odin-able version but i don't have access to a computer for a few days so i am looking for a flashable zip that i can flash in cwm recovery? I know these type of zips exist for the us carriers....but has anyone made one for the Canadian versions???
any help or links would be great..
AGAIN, I'M LOOKING FOR A FLASHABLE STOCK ROOTED ZIP FOR sasktel I747M (BASEBAND MF1) THAT I CAN FLASH IN CWM 6.0.4.7 RECOVERY...NOT ODIN.
Thanks!
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Not sure if mobile Odin will help: http://forum.xda-developers.com/showthread.php?t=1347899
Pre-rooted ROMs: http://forum.xda-developers.com/showthread.php?t=1739426
did you ever solve this issue? I was wondering the same thing, wanting to flash back to rogers 4.1.1/2 and them back to Quantum to fix the minor LTE issue. I was considering mobile ODIN.
jmah10 said:
did you ever solve this issue? I was wondering the same thing, wanting to flash back to rogers 4.1.1/2 and them back to Quantum to fix the minor LTE issue. I was considering mobile ODIN.
Click to expand...
Click to collapse
Do you have the i747m? If you do, you can try flashing a stock ROM from sammobile. Not sure if you can use Odin with a 4.3 bootloader.
audit13 said:
Do you have the i747m? If you do, you can try flashing a stock ROM from sammobile. Not sure if you can use Odin with a 4.3 bootloader.
Click to expand...
Click to collapse
yep, i'm on the i747m with the LK4 bootloader, so I think that's 4.1.1? Ideally, I was hoping to just use CWM to flash everything - stock rom, then back to quantum, but I hadn't found a flashable version of stock rom for CWM yet. I will check out sammobile, though, thanks.
I never did find a zip...I ended up odining back and then making sure i made a stock rooted nandroid before going back to aosp...
So, I'm not a complete noob to flashing roms/rooting devices. I flashed cm 11 to my s3, and decided I wanted to go back to stock via Odin. For some reason when I tried to turn on my device it was still showing the cm 11 splash screen and wouldn't proceed any further. It isn't technically bricked. I guess this would be classified as a boot loop to the nth degree. I tired to boot in recovery mode and wipe the cache partition and all user data to the same cm 11 robot taunting me. When I tried the process (flashing stock vi Odin) again to possibly fix whatever might have been a miss, I got the error message on the download screen "secure check fail: sb12." On the download mode screen it also says I am running the official system rom. I don't know what steps I need to take from here to get my phone to actually boot via the stock rom. Has anybody else had this issue or similar? Any help in resolving this would be greatly appreciated.
Is your phone a i747? If you are you running a stock 4.3 bootloader on your i747, you can't use Odin to flash back to stock unless the ROM was specifically designed to be flashed in Odin.
What is shown on the screen in download mode?
audit13 said:
Is your phone a i747? If you are you running a stock 4.3 bootloader on your i747, you can't use Odin to flash back to stock unless the ROM was specifically designed to be flashed in Odin.
What is shown on the screen in download mode?
Click to expand...
Click to collapse
I was under the impression the rom I was attempting to flash was indeed intended for Odin. It is the SGH-I747.
The download screen states,
Product Name: SGH-I747
Custom Binary: Custom
System Status: Official
Qualcom Secure Boot: Enable
Warranty Bit: 1
Bootloader AP SWERV: 2
Here is an added bit of fun, in the midst of the process I accidentally checked "Nand erase all," in Odin at one point.
Based on the information provided, your phone is running a stock ATT 4.3 bootloader. The CM11 splash screen is still showing up because the flash did not actually happen. You're lucky your phone was not bricked in the process of using Odin. I recommend not using Odin to flash a ROM that tries to alter the bootloader.
I recommend flashing a custom recovery such as Philz Touch in Odin and flashing a different KK ROM such as Valudis.
If you want to get back to stock, try this: http://forum.xda-developers.com/showthread.php?t=2658486
audit13 said:
Based on the information provided, your phone is running a stock ATT 4.3 bootloader. The CM11 splash screen is still showing up because the flash did not actually happen. You're lucky your phone was not bricked in the process of using Odin. I recommend not using Odin to flash a ROM that tries to alter the bootloader.
I recommend flashing a custom recovery such as Philz Touch in Odin and flashing a different KK ROM such as Valudis.
If you want to get back to stock, try this: http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
My next question would be how can I move the zip files I download to the internal storage of my phone to flash them through Philz Touch?
Have you tried using kies?
http://forum.xda-developers.com/showthread.php?t=2088809
sjthuss said:
Have you tried using kies?
http://forum.xda-developers.com/showthread.php?t=2088809
Click to expand...
Click to collapse
I did. It said the the device couldn't be updated, or something to that effect.
Kies will not work without a stock recovery or a rooted phone from my experience.
I would be surprised if kies can restore your phone as ATT never released a full 4.3 stock ROM. ATT only made 4.3 available via an OTA update.
audit13 said:
Kies will not work without a stock recovery or a rooted phone from my experience.
I would be surprised if kies can restore your phone as ATT never released a full 4.3 stock ROM. ATT only made 4.3 available via an OTA update.
Click to expand...
Click to collapse
I don't know about AT&T, but I'm on Telus in Canada and I used kies to revert back to stock 4.3 with CWM recovery and phone rooted, and it worked no problem.
audit13 said:
Based on the information provided, your phone is running a stock ATT 4.3 bootloader. The CM11 splash screen is still showing up because the flash did not actually happen. You're lucky your phone was not bricked in the process of using Odin. I recommend not using Odin to flash a ROM that tries to alter the bootloader.
I recommend flashing a custom recovery such as Philz Touch in Odin and flashing a different KK ROM such as Valudis.
If you want to get back to stock, try this: http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
So, I know there is a "thanks," button but I feel like that would be a little too informal for how much I appreciate your help! I downloaded ADB to move the rom (I went with AOKP because it was the first one that worked) to my phone, flashed it using TWRP and...BAM! We are back in business. Thanks for the direction, I thought I had a nice, new, shiny brick on my hands for about two days.
sjthuss said:
I don't know about AT&T, but I'm on Telus in Canada and I used kies to revert back to stock 4.3 with CWM recovery and phone rooted, and it worked no problem.
Click to expand...
Click to collapse
Canadian carriers use the i747m while att users get the i747.
The Canadian carriers did release a full 4.3 ROM unlike att who did not.