So, i decide to root my s3 because i wanted to do some cool stuff. I got odin, got the tar file and tried flashing it. For some reason it didn't work :crying: On odin it gave me a fail. I was in download mode too. So, when i turn on my s3 it is in odin mode but it says "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." i did this in kies and when it was at like 99% it gives me an error. :crying:
so i tried flashing again in odin still fail, but i get on my s3 SV REV CHECK FAIL: Fused 2 > Binary 0. I have no clue what that means, So, i just want my phone to get working again i dont care about rooting anymore. JUST HELP ME FIX IT!!!!:crying:
BTW: I di root my Kindle Fire a while back so i thought I would have experience with this (i kind of do) but i guess I thought wrong.
Was your phone running a stock 4.3 AT&T ROM? What method did you use to try and root the phone?
audit13 said:
Was your phone running a stock 4.3 AT&T ROM? What method did you use to try and root the phone?
Click to expand...
Click to collapse
i think so and i tired using odin and i put the phone in download mode so i could flash the .tar file
Resistance225 said:
i think so and i tired using odin and i put the phone in download mode so i could flash the .tar file
Click to expand...
Click to collapse
Since your phone was running a stock 4.3 ROM, you can't use Odin to install a stock AT&T 4.3 ROM because it doesn't exist. There are leaked ROMs around that you could try flashing.
Alternatively, you could install a custom recovery and install a custom 4.4.2 ROM.
audit13 said:
Since your phone was running a stock 4.3 ROM, you can't use Odin to install a stock AT&T 4.3 ROM because it doesn't exist. There are leaked ROMs around that you could try flashing.
Alternatively, you could install a custom recovery and install a custom 4.4.2 ROM.
Click to expand...
Click to collapse
I will try to do this! Thanks for helping me though, i will keep you updated. :fingers-crossed:
audit13 said:
Since your phone was running a stock 4.3 ROM, you can't use Odin to install a stock AT&T 4.3 ROM because it doesn't exist. There are leaked ROMs around that you could try flashing.
Alternatively, you could install a custom recovery and install a custom 4.4.2 ROM.
Click to expand...
Click to collapse
I installed a recovery and guess what, it started working again! All my data was still there too! Thanks i really appreciate you taking the time to help me! I also was able to succsessfully root it by using the CF auto root .tar file. Once again, thanks a ton!
Resistance225 said:
I installed a recovery and guess what, it started working again! All my data was still there too! Thanks i really appreciate you taking the time to help me! I also was able to succsessfully root it by using the CF auto root .tar file. Once again, thanks a ton!
Click to expand...
Click to collapse
Glad you got it working. We're all here to help.
Related
Hi,
I just got my Galaxy S III and decided to root it. I had done it before. I made a mistake and it wouldn't reboot, so, I had to put the stock rom on the device again. I found the stock rom, which was a 4.0.4 version and flashed it with no problem. But, then, the automatic update installed the 4.1.1 version. Here is when the problem starts: after installation, when I try to go into the recovery mode to clear the cache, the android is dead with a read triangle above it. I don't know what to do since I want to flash a custom rom.
Oh, a small detail that might be important. The stock rom is flashed using ODIN, but the reboot process is so lengthy, I have to remove the battery and then clear the cache before it fully reboots. At this stage (still 4.0.4) there is no problem with recovery mode and everything is fine. It is only after the update to 4.1.1 that the problem starts.
Your helps are much appreciated.:angel:
rezaasl2000 said:
Hi,
I just got my Galaxy S III and decided to root it. I had done it before. I made a mistake and it wouldn't reboot, so, I had to put the stock rom on the device again. I found the stock rom, which was a 4.0.4 version and flashed it with no problem. But, then, the automatic update installed the 4.1.1 version. Here is when the problem starts: after installation, when I try to go into the recovery mode to clear the cache, the android is dead with a read triangle above it. I don't know what to do since I want to flash a custom rom.
Oh, a small detail that might be important. The stock rom is flashed using ODIN, but the reboot process is so lengthy, I have to remove the battery and then clear the cache before it fully reboots. At this stage (still 4.0.4) there is no problem with recovery mode and everything is fine. It is only after the update to 4.1.1 that the problem starts.
Your helps are much appreciated.:angel:
Click to expand...
Click to collapse
So you can esily flash 4.0.4 with no hiccup but then you get the update (kies I assume) and it fails ?
Do you want to be rooted ?
if not just flash the stock 4.1.1 from Sammobile in Odin and update that way to avoid that Kies garbage
hednik said:
So you can esily flash 4.0.4 with no hiccup but then you get the update (kies I assume) and it fails ?
Do you want to be rooted ?
if not just flash the stock 4.1.1 from Sammobile in Odin and update that way to avoid that Kies garbage
Click to expand...
Click to collapse
Thanks for the reply. I do want to be rooted. Mine is an i747. Can you attach the link so I don't download the wrong one?
rezaasl2000 said:
Thanks for the reply. I do want to be rooted. Mine is an i747. Can you attach the link so I don't download the wrong one?
Click to expand...
Click to collapse
Find your carrier and flash one of these in Odin as they are pre-rooted.
http://forum.xda-developers.com/showthread.php?t=1739426
hednik said:
Find your carrier and flash one of these in Odin as they are pre-rooted.
http://forum.xda-developers.com/showthread.php?t=1739426
Click to expand...
Click to collapse
Thank you so much for the reply. After purchasing my g3 from AT&T, I used the same link you just sent me to flash the device. But it didn't work even though I changed the USB port. It installs SuperSU, but the recovery fails. I will try it one more time before and report back to you.
thanks again.
rezaasl2000 said:
Thank you so much for the reply. After purchasing my g3 from AT&T, I used the same link you just sent me to flash the device. But it didn't work even though I changed the USB port. It installs SuperSU, but the recovery fails. I will try it one more time before and report back to you.
thanks again.
Click to expand...
Click to collapse
It failed again (dead android with a red triangle above it). I have checked the ODIN version, whether the md5 file was downloaded correctly. I'm very frustrated.
rezaasl2000 said:
It failed again (dead android with a red triangle above it). I have checked the ODIN version, whether the md5 file was downloaded correctly. I'm very frustrated.
Click to expand...
Click to collapse
So you can't flash anything 4.1.1 or 4.1.2 ? That's odd that only 4.0.4 works. Does it fail with Kies too ?
What about just rooting using CF-auto root or casual and then flashing a rom ?
hednik said:
So you can't flash anything 4.1.1 or 4.1.2 ? That's odd that only 4.0.4 works. Does it fail with Kies too ?
What about just rooting using CF-auto root or casual and then flashing a rom ?
Click to expand...
Click to collapse
Okay, so, this method didn't work either. I went back to the link you sent me with the pre-rooted version and flashed it. Now, it has the same problem (dead android with red triangle), but RootChecker says that I'm rooted. I don't know what difference that makes.
Any thoughts?
rezaasl2000 said:
Okay, so, this method didn't work either. I went back to the link you sent me with the pre-rooted version and flashed it. Now, it has the same problem (dead android with red triangle), but RootChecker says that I'm rooted. I don't know what difference that makes.
Any thoughts?
Click to expand...
Click to collapse
So cf auto root worked but you can't flash ? You need to install a recovery. Can you flash a custom recovery in Odin or mobile Odin ?
Sent from my SGH-I747 using xda premium
hednik said:
So cf auto root worked but you can't flash ? You need to install a recovery. Can you flash a custom recovery in Odin or mobile Odin ?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
So, I finally figured it out. I used the samsung galaxy s3 toolkit to install the stock firmware and then I updated it on the phone. Next, I went back to the toolkit and installed the most recent version of CWM on it and everything just worked beautifully. I have LiquidSmooth installed and it works just great.
thank you for the help hendik.
:good:
I tired to root my galaxy s3 but ended up bricking it for a while and all i got was the Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. After trying odin so many time i finally got it to work but now i have another issue...i put verizon 4.1 on my phone using odin instead of att. my att sim wont work and i dont know how i am going to get it back to att stock rom so i can use my phone again!!! if anyone know how to reset this please help i just got the phone and now i cant use it because it has Verizon instead of att galaxy s3 stock rom on it.:crying:
pimpjayjay said:
I tired to root my galaxy s3 but ended up bricking it for a while and all i got was the Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. After trying odin so many time i finally got it to work but now i have another issue...i put verizon 4.1 on my phone using odin instead of att. my att sim wont work and i dont know how i am going to get it back to att stock rom so i can use my phone again!!! if anyone know how to reset this please help i just got the phone and now i cant use it because it has Verizon instead of att galaxy s3 stock rom on it.:crying:
Click to expand...
Click to collapse
Did you ever flash android 4.3 on you're phone? (This is important)
Ali7000 said:
Did you ever flash android 4.3 on you're phone? (This is important)
Click to expand...
Click to collapse
it already had 4.3 i was trying to root it but the process faild and all i get is the error Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again
pimpjayjay said:
it already had 4.3 i was trying to root it but the process faild and all i get is the error Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again
Click to expand...
Click to collapse
Try these http://forum.xda-developers.com/showthread.php?t=2498233, stock at&t rooted without Knox (Believe me man, better without knox). But they are only leaks of the official firmware. I am not a professional developer so you might wanna create a new thread and ask if it's possible in you're situation.
Ali7000 said:
Try these http://forum.xda-developers.com/showthread.php?t=2498233, stock at&t rooted without Knox (Believe me man, better without knox). But they are only leaks of the official firmware. I am not a professional developer so you might wanna create a new thread and ask if it's possible in you're situation.
Click to expand...
Click to collapse
okay i will look it up and see if it works , thanks.
The Canadian and US phones are pretty similar. Maybe a Canadian rom will work?
You can find official firmware here: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
audit13 said:
The Canadian and US phones are pretty similar. Maybe a Canadian rom will work?
You can find official firmware here: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
Click to expand...
Click to collapse
No it won't work. Since it is a stock rom it most likely will not work, he won't be able to call, text, or use data.
Ali7000 said:
No it won't work. Since it is a stock rom it most likely will not work, he won't be able to call, text, or use data.
Click to expand...
Click to collapse
I wasn't sure if the OP could install some sort of stock firmware to get his phone going and then install the necessary radio.
audit13 said:
I wasn't sure if the OP could install some sort of stock firmware to get his phone going and then install the necessary radio.
Click to expand...
Click to collapse
The best choice for him is to stick to a custom rom until the AT&T 4.3 update releases.
Ali7000 said:
The best choice for him is to stick to a custom rom until the AT&T 4.3 update releases.
Click to expand...
Click to collapse
Wow. it seems as if you got people in here just giving you ODIN TARS to flash. i wouldnt listen/ flash anything than the leaked 4.3 update for att because MOST odin files have bootloader upgrades in them and if you are on 4.3 you will brick trying to restore stock
Andy_nu said:
Wow. it seems as if you got people in here just giving you ODIN TARS to flash. i wouldnt listen/ flash anything than the leaked 4.3 update for att because MOST odin files have bootloader upgrades in them and if you are on 4.3 you will brick trying to restore stock
Click to expand...
Click to collapse
Hah Yah man I've been through a lot sh**.
Sent from my SGH-I747M using XDA Premium 4 mobile app
At&t Tar files
what should i do, the tar file for Verizon still fails but it will go as far as to let my device boot but so i can at least get to recovery mode and then i can reboot it and clear system data but of courses that not what i want because it running Verizon.I is there a way to find the tar file that has at&t on it so i can try to make it work?
Ali7000 said:
Hah Yah man I've been through a lot sh**.
Sent from my SGH-I747M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
what should i do, the tar file for Verizon still fails but it will go as far as to let my device boot but so i can at least get to recovery mode and then i can reboot it and clear system data but of courses that not what i want because it running Verizon.I is there a way to find the tar file that has at&t on it so i can try to make it work?
Based on the OP, the phone is currently running Verizon's 4.1 which leads me to believe the bootloader has not been updated beyond 4.1.2 since recovery mode is accessible; therefore, I think flashing 4.11 or 4.1.2 stock roms would be fine.
As always, it's best to check the installed bootloader before proceeding with any more flashes.
I used the stock firmware from here to downgrade my Bell s3 from stock 4.1.2 to stock 4.1.1.
Stock firmware: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
pimpjayjay said:
what should i do, the tar file for Verizon still fails but it will go as far as to let my device boot but so i can at least get to recovery mode and then i can reboot it and clear system data but of courses that not what i want because it running Verizon.I is there a way to find the tar file that has at&t on it so i can try to make it work?
Click to expand...
Click to collapse
Download the ATT Image
Current I747UCDLK3 (JB 4.1.1)
http://forum.xda-developers.com/showthread.php?t=1739426
audit13 said:
Based on the OP, the phone is currently running Verizon's 4.1 which leads me to believe the bootloader has not been updated beyond 4.1.2 since recovery mode is accessible; therefore, I think flashing 4.11 or 4.1.2 stock roms would be fine.
As always, it's best to check the installed bootloader before proceeding with any more flashes.
I used the stock firmware from here to downgrade my Bell s3 from stock 4.1.2 to stock 4.1.1.
Stock firmware: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
Click to expand...
Click to collapse
i wouldnt flash the bootloader just to to be safe though. id flash the recovery from the root forum and then install a cm or aosp ROM.
or open the tar and make sure there are not bootloader related files i forgot all of them but one is mbl. something and 1,2,3 theres a post on here how to check i just dont know where
As you'll soon discover, I'm a noob. I stupidly took the OTA update on my Samsung Galaxy S3 T-Mobile T999 from 4.1.2 to 4.3. Since doing so mine and my wife's phone (did the same thing to her also) gets in a mess after being connected to the car stereo bluetooth and prevents outgoing calls unless the phone is rebooted.
So to try to solve this, I rooted the phone and installed CM 11, so now I'm on 4.4.2. This didn't help the issue either and instead is worse at connecting to the bluetooth.
I want to get my phone back to the stock 4.1.2 rom, which I got from sammobile (PDA T999UVDMD5) or at worst back to the 4.3 stock rom (PDA T999UVUEMJC).
This morning I tried to flash T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar using ODIN 307 but it failed almost instantly with an Fail! Auth message.
I also tried to flash CM 10.1 zip on my SD card using ClockworkMod Recovery v 6.0.4.5 but again it failed almost instantly (sorry I didn't take note of the error).
So now I'm back to CM 11. So any suggestions for how to get back to either of the stock roms?
huz666 said:
As you'll soon discover, I'm a noob. I stupidly took the OTA update on my Samsung Galaxy S3 T-Mobile T999 from 4.1.2 to 4.3. Since doing so mine and my wife's phone (did the same thing to her also) gets in a mess after being connected to the car stereo bluetooth and prevents outgoing calls unless the phone is rebooted.
So to try to solve this, I rooted the phone and installed CM 11, so now I'm on 4.4.2. This didn't help the issue either and instead is worse at connecting to the bluetooth.
I want to get my phone back to the stock 4.1.2 rom, which I got from sammobile (PDA T999UVDMD5) or at worst back to the 4.3 stock rom (PDA T999UVUEMJC).
This morning I tried to flash T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar using ODIN 307 but it failed almost instantly with an Fail! Auth message.
I also tried to flash CM 10.1 zip on my SD card using ClockworkMod Recovery v 6.0.4.5 but again it failed almost instantly (sorry I didn't take note of the error).
So now I'm back to CM 11. So any suggestions for how to get back to either of the stock roms?
Click to expand...
Click to collapse
If you are getting errors in both odin and cwm, it sounds like it is a root issue. In other words, it sounds like the apps are being denied access to root and therefor cannot flash. Both odin and cwm are able to generate logs so you can tell the reason for the fail. Personally, I would recommend flasing twrp recovery instead of cwm since it seems to simplify alot and is a little better for our device. Without knowing exactly why the flash is failing, i would just recommend to try and re-root the phone again.
Did you put the phone in Downloading mode before connecting to the Odin ?
Do not try to flash 4.1.2 ever. It will brick your phone.
Perseus71 said:
Did you put the phone in Downloading mode before connecting to the Odin ?
Do not try to flash 4.1.2 ever. It will brick your phone.
Click to expand...
Click to collapse
Yes the phone was in downloading mode. I couldn't find any posts that thought that I would brick my phone for sure by downgrading so I thought I would try. Could I go back to the 4.3 Stock ROM with some degree of confidence?
Yes you can go back to 4.3 Stock.
Perseus71 said:
Yes you can go back to 4.3 Stock.
Click to expand...
Click to collapse
So I'm now back to Stock 4.3 by doing a flash via Odin. I did (stupidly) try to then go back to 4.1.2 again using Odin having put the phone in USB debugging mode first but I still got the same Auth Fail error.
Thanks for all the help.
huz666 said:
So I'm now back to Stock 4.3 by doing a flash via Odin. I did (stupidly) try to then go back to 4.1.2 again using Odin having put the phone in USB debugging mode first but I still got the same Auth Fail error.
Thanks for all the help.
Click to expand...
Click to collapse
You cannot downgrade like that once you have updated to official 4.3 firmware, no offence but why would you try it even after Perseus said not to? Anyway if you want to go back to 4.1.2 so badly just download a 4.1.2 ROM and flash it in recovery
Sent from my SGH-M919 using Tapatalk
serio22 said:
You cannot downgrade like that once you have updated to official 4.3 firmware, no offence but why would you try it even after Perseus said not to? Anyway if you want to go back to 4.1.2 so badly just download a 4.1.2 ROM and flash it in recovery
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
.
Thanks for the advice. I think I'll just quit while I'm only slightly behind now and remain on 4.3 Stock. I appreciate everyone's help and suggestions.
Downgrade from CM11 4.4.2 to 4.3 on I747
I went from 4.3 stock to CM11 on my i747 but i didnt like the update. So i am trying to go back to 4.3 however whenever i try to install the 4.3 zip file thru twrp or CWM, it fails. As far as i know there is no odin file for going back. I tried to flash rogers 4.3 file through odin (thinking i would flash at&t modem later) but that also failed.
I would appreciate any help on how to install 4.3 once 4.4.2 has been installed on an i747
You seriously need to do some reading
Sent from my SGH-T999 using Tapatalk
nitagro said:
I went from 4.3 stock to CM11 on my i747 but i didnt like the update. So i am trying to go back to 4.3 however whenever i try to install the 4.3 zip file thru twrp or CWM, it fails. As far as i know there is no odin file for going back. I tried to flash rogers 4.3 file through odin (thinking i would flash at&t modem later) but that also failed.
I would appreciate any help on how to install 4.3 once 4.4.2 has been installed on an i747
Click to expand...
Click to collapse
For One, you are on the wrong forum. This is for T-Mobile's S3 not AT&T. Second, Like @passtheknowledge said, you really need to do significant research and reading here on XDA.
Perseus71 said:
For One, you are on the wrong forum. This is for T-Mobile's S3 not AT&T. Second, Like @passtheknowledge said, you really need to do significant research and reading here on XDA.
Click to expand...
Click to collapse
I was up all night reading and trying all the suggestions that have been posted so far. Nothing worked. I would appreciate if someone can throw some light on what might be wrong.
nitagro said:
I was up all night reading and trying all the suggestions that have been posted so far. Nothing worked. I would appreciate if someone can throw some light on what might be wrong.
Click to expand...
Click to collapse
Please Read through this Thread. For Future Reference, all Odin Files for S3 in general are looked up by unique Keyword Root66. That thread is the right place for you to post errors or issues. If there's no 4.3 image for your phone there, you can post a request as well.
For your immediate Problem, there is a an alternate ATT StockMod Rom by @saranhai Please see this thread. Pay particular attention to the mandatory requirement of flashing a particular modem beforehand.
Hello, I am currently rooted and have CWM 6.0.4.3. installed. I'm on CM11 but want to go back to stock.. Is there an easy way to keep root and go back to stock. Want stock for a few functions that ROMS dont seem to be offering but can keep root and CWM ??
Thanks.
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
DeathNotice said:
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
Click to expand...
Click to collapse
Ok perfect, thats what I was looking for. Phone btw is S3 - d2att - SGH i747) Sounds good to install the stock rom and re-root.. I'm sure its here but I have searched everywhere to find a tutorial on this and I cannot find a straight answer.
Would you mind giving me the steps or pointing me to a thread that explains how to and has the files in need to download ?
audit13 said:
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Click to expand...
Click to collapse
Do you know if there is a step by step on this somewhere ? I dont mind going back to complete stock.. I can just re-root and flash CWM after.
OR
Maybe you could just answer the bigger question : the reason I want to go back to stock is I need to use MHL/HDMI which CM11 doesnt support. I dont want to go back to stock, I would rather even go to another ROM that supports mhl/hdmi.. but if I have to go to stock, than so be it.?
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
audit13 said:
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
Click to expand...
Click to collapse
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
robberrobbie said:
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
Click to expand...
Click to collapse
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
audit13 said:
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
Click to expand...
Click to collapse
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
robberrobbie said:
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
Click to expand...
Click to collapse
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
audit13 said:
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
Click to expand...
Click to collapse
Ok thanks, I will do that. 1 thing I'm not quite sure of is the bootloader situation ? In the first tutorial there is a note : Flashing a prior bootloader can hard/soft brick your device. How do I know ?
I see the steps as:
Extract tar file you downloaded.
Use Odin, put phone into download mode [with phone off, hold vol. down + home + power ], connect to computer and open Odin.
once in odin click the PDA field and select the tar file
Leave Auto Reboot and F. Reset Time checked.
click start and when done let phone reboot.
If you just want a stock, rooted phone with no custom recovery, no plans to flash custom roms, etc. then you can stop HERE.
For my situation, is it just that easy ?
Before flashing, verify the version of your bootloader.
audit13 said:
Before flashing, verify the version of your bootloader.
Click to expand...
Click to collapse
OK I have made an effort to go read and figure out how to find out what version of bootloader on my own.. But i cannot find ? Any chance you know... And could help?
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Hey. I got the i747m. As for what was the last stock ROM I had, can't say. I know when I bought the phone it was ICS and I had received and update to jellybean.. But them went to cm10. The tutorial I followed told me had me back everything up, which I did. Have it in a file somewhere on my comp, would that tell me ?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Ariesdroid said:
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have not seen a stock mf1 ROM that can be flashed in CWM. You could use mobile Odin to flash back to stock and then flash Philz Touch via desktop Odin later.
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
audit13 said:
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Click to expand...
Click to collapse
Hey there Audit, Sorry to bother you again, I just dont know how to move forward from here and neeeeeed some help.
I have been reading for days and days have not found a straight answer for my issue and I dont want to just go ahead and start flashing when I dont know if its the right method ?
I dont know how to get back to stock from where I'm at, I dont know how to figure out what bootloader I have (you asked me)
I have found a couple links on XDA that I can follow, I'm just not sure if they apply to my situation ?
This is a pretty detailed response/tutorial, but I dont know if I can just go ahead with this or not ?
http://forum.xda-developers.com/showthread.php?t=2186967
This is also very detailed: http://forum.xda-developers.com/showthread.php?t=1739426
Any help would be greatly appreciated !
robberrobbie said:
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
Click to expand...
Click to collapse
If you are sure you have the Rogers i747m and you have never loaded a stock Rogers 4.3 ROM onto your phone, you could use desktop Odin to flash a pre-rooted 4.1.2 ROM from here: http://forum.xda-developers.com/showthread.php?t=1739426.
Flashing the pre-rooted 4.1.2 ROM will return the phone to completely stock, wipe out all installed apps and data, and you will have root. I do not recommend flashing the Rogers 4.3 pre-rooted ROM from the link.
Once you are able to boot into the phone and set things up, you can flash Philz Touch from Odin which will give you a custom recovery on a rooted stock 4.1.2 ROM.
Phone was rooted with a custom rom and custom recovery. I tried to do the OTA update to get the latest version of Android Stock and it failed. I downloaded Odin and tried to flash stock recovery and now its stuck in Download Mode.
I have tried all these roms with no success
https://rwilco12.com/downloads.php?dir=Files/Devices/Samsung Galaxy S3 (SPH-L710)/Stock ROMs/
I've tried 4-5 different versions of odin as well and everything fails.
If anyone could help me I'd really appreciate it. Thanks!
cwa82 said:
Phone was rooted with a custom rom and custom recovery. I tried to do the OTA update to get the latest version of Android Stock and it failed. I downloaded Odin and tried to flash stock recovery and now its stuck in Download Mode.
I have tried all these roms with no success
https://rwilco12.com/downloads.php?dir=Files/Devices/Samsung Galaxy S3 (SPH-L710)/Stock ROMs/
I've tried 4-5 different versions of odin as well and everything fails.
If anyone could help me I'd really appreciate it. Thanks!
Click to expand...
Click to collapse
Holy cow. You cannot OTA update with custom ROM and recovery. Not possible. You need Odin with the whole stock ROM (which is KitKat). Ugh
You would have to flash the entire stock .tar in Odin.... Why? It's KitKat... 4.4.2. no security patches.
Flash TWRP and whatever custom ROM you were on.
No backup? It's difficult to help that
madbat99 said:
Holy cow. You cannot OTA update with custom ROM and recovery. Not possible. You need Odin with the whole stock ROM (which is KitKat). Ugh
You would have to flash the entire stock .tar in Odin.... Why? It's KitKat... 4.4.2. no security patches.
Flash TWRP and whatever custom ROM you were on.
No backup? It's difficult to help that
Click to expand...
Click to collapse
i do have a backup
If I could just get TWRP working I would be all set and minimum be back where I started.
I was able to fix the phone.
I installed Kies3Setup
I ran all the updates and then I uninstalled it.
I downloaded L710VPUDNJ2_L710SPRDNJ2_L710VPUDNJ2_HOME.tar.md5
I successfully loaded it in PDA with Odin3v185
hopefully this helps someone else who's stuck in download mode with a Sprint Galaxy s3
cwa82 said:
I was able to fix the phone.
I installed Kies3Setup
I ran all the updates and then I uninstalled it.
I downloaded L710VPUDNJ2_L710SPRDNJ2_L710VPUDNJ2_HOME.tar.md5
I successfully loaded it in PDA with Odin3v185
hopefully this helps someone else who's stuck in download mode with a Sprint Galaxy s3
Click to expand...
Click to collapse
Good job