[Q] Galaxy Tab S "Bricked"? after installing customer rom - Galaxy Tab S Q&A, Help & Troubleshooting

Hello Guys,
Need your help.
I have flashed hundreds of roms on my android phones and tablets, but this time something new happened to me:
After installing a t700 Rom using twrp recovery, my tablet got stuck at boot logo, doesn't matter how many resets i try, it never goes beyond the black and whit samsung boot logo!
I have tried to reset using kies, flashed a stock firmware with Odin, etc ect ect, nothing! its still stuck at boot logo.
One curious thing happened, after flashing sock firmwares for the second or third time, the Samsung sounds stops halfway, and then it goes back to the Samsung logo.
Any ideas on how to get out of this nightmare?
Thank you!!

Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Samsung Galaxy Tab S
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
Galaxy Tab S Q&A, Help & Troubleshooting
Good luck!

black_coder said:
Hello Guys,
Need your help.
I have flashed hundreds of roms on my android phones and tablets, but this time something new happened to me:
After installing a t700 Rom using twrp recovery, my tablet got stuck at boot logo, doesn't matter how many resets i try, it never goes beyond the black and whit samsung boot logo!
I have tried to reset using kies, flashed a stock firmware with Odin, etc ect ect, nothing! its still stuck at boot logo.
One curious thing happened, after flashing sock firmwares for the second or third time, the Samsung sounds stops halfway, and then it goes back to the Samsung logo.
Any ideas on how to get out of this nightmare?
Thank you!!
Click to expand...
Click to collapse
1. Load up your PC the original stock firmware, which corresponds to your Tab original Region CSC-code according to the model number and serial number of your Tab. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
2. Flash your Tab by Odin c original stock firmware from p.1
Regards

I have seen this before when a tablet gets stuck on the Samsung logo, what you need to do is after flashing your stock firmware using odin, you then need to get into stock recovery and wipe cache and factory reset from within stock recovery and then reboot.

Related

[Q&A] [ROOT-METHOD][Odin] P5210 | Samsung Galaxy Tab 3 10.1

Q&A for [ROOT-METHOD][Odin] P5210 | Samsung Galaxy Tab 3 10.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROOT-METHOD][Odin] P5210 | Samsung Galaxy Tab 3 10.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
has not worked
hello
im super new to this rooting community
i followed the instructions to the letter
but everytime it boots is gets stuck on the samsung screen
it glows so i know its not frozen
bricked p5210
hey guys,
i tried to root my gt-p5210 by flashing through odin 3.07: CF-Auto-Root-santos10wifi-santos10wifixx-gtp5210 zip file
after the flashing the device got stuck into boot samsung boot logo and repeat restarting.
i didn't make a recovery file and that is my mistake :S
i tried to flash original rom the same problem persists and everytime i log to the boot menu and try to wipe cash the tab restarts immidiatly without wipping , i thaught that is cash problem and i flashed twrp and logged into recovery mode and then wipped all my data and cash "dalvik, system,data" i tried to boot a second original firmware but the problem persists and finaly i installed a custom rom .. once again wipped all data and instaled the new custom rom .. and again ... boot stuck on samsung logo!!
please is there anything i can do to revive my tablet?! thank you
my tablet is made in vietnamm refurb in usa.
kasso16 said:
hey guys,
i tried to root my gt-p5210 by flashing through odin 3.07: CF-Auto-Root-santos10wifi-santos10wifixx-gtp5210 zip file
after the flashing the device got stuck into boot samsung boot logo and repeat restarting.
i didn't make a recovery file and that is my mistake :S
i tried to flash original rom the same problem persists and everytime i log to the boot menu and try to wipe cash the tab restarts immidiatly without wipping , i thaught that is cash problem and i flashed twrp and logged into recovery mode and then wipped all my data and cash "dalvik, system,data" i tried to boot a second original firmware but the problem persists and finaly i installed a custom rom .. once again wipped all data and instaled the new custom rom .. and again ... boot stuck on samsung logo!!
please is there anything i can do to revive my tablet?! thank you
my tablet is made in vietnamm refurb in usa.
Click to expand...
Click to collapse
If it has the US stock ROM and it worked fine before you started. You might try this....it's how I upgraded to KitKat and rooted my 5210
Good luck
I did everything as said in the first post to root but now I'm stuck on boot screen, saying samsung galaxy tab3 and not going anywhere
P5220dxubnh1
Hello, how to root for p5220DXUBNH1 running on kitkat.. 4.4.2
Firmware?
The first download link is for the 7.0" tablet. Does it still work on the 10.1" version? I can't find the US version of the firmware on Sam Mobile, so the other option is my only choice...
Thanks in advance!

Stuck at samsung logo, no firmware will take.

Hey guys, I'm in deep!!! I returned my Note 2 back to stock and made the mistake of doing the AT&T OTA update. When I tried to install a recovery I got the Samsung logo and it's been there ever sense. I've tried to flash, via Odin (multiple versions) the I317UCAMA4 and the I317UCALJ2 firmwares and I still get the samsung logo. When the flash is finished I take the battery out and try to get into recovery mode but it always gets stuck at the Samsung logo. I don't know what else to do. I hope this doesn't mean that the phone is useless; I've bricked and unbricked the phone on multiple occasions. But this time its different. Any help would be appreciated.
Never mind. I found the solution here:
http://forum.xda-developers.com/galaxy-note-2-att/help/stuck-boot-odin-flash-to-stock-t2949408

[Q] Need Help [email protected]! Samsung Logo Hangs

okay guys I found a few threads on this topic but none of the links for downloads work. I tried to root my phone and when it rebooted it hung up on the Samsung logo I can get into download mode but I could not access the Android menu from the start screen by holding the volume up button I have tried to flash every possibility through ODIN and have had no luck my samsung Knox has the number one next to it so I know its stripped is there any software at all out there to get my phone working again I don't care about the warranty or the operating system I just want to be able to use my phone if somebody can send me a link or two for the correct software for odin software it would be greatly appreciated and I have tried the usual two regular firmware versions and I've had no luck please help and my phone is an SGH-I317 at&t samsung galaxy note 2
flash recovery through ODIN
then try troubleshooting from there.
factory default etc

Need help Samsung Tab 3 T210R Stuck in Samsung Loop

I am no expert like some of you in the community and I am not novice, I've rooted/installed Roms/ unbricked devices before. I purchased a Samsung Tab 3 T210R that was stuck in the Samsung loop. Upon receiving the Tab 3 I reset to default and wipe cache, it then restated and took me to the set up process if the device (like logging into my Samsung acct, setting up date/time) but it would freeze through the process. So, I then I followed everything stated in this thread http://forum.xda-developers.com/showthread.php?t=2459734 ..after following the steps in the thread I got a "kernel panic" message. I followed the task a second & third time using the first two links in Sammobile (Canada and Cellular South), the device now stays in the Samsung loop and sometimes shows a pixelated/ distorted Samsung logo.
Since I bought the device on eBay "as-is", I don't know what Android version was installed, but from the looks of it, it may have been a stock rom. I do know the model number is T210R 8 GB WiFi. I hope you guys can guide me and explain how to fix this issue. I would truly appreciate your help!
I forgot to mention after rebooting it to wipe cache/reset there's a message in red that reads " E: failed to verify whole-file"
Thanks in advance!

My Galaxy Tab 3 P5210 doesn't start !!!

Hi, this is my second post so sorry if this doesn't the place and sorry for my English.
I want ask you for help because my Galaxy Tab 3 P5210 doesn't pass the logo. When I connect the charger, doesn't appear the battery icon , only appears samsung galaxy tab 3 's logo and when I turn on it, the logo is frozen.
I tried unbrick with Odin, with all versions, more than 20 different firmwares, flashing customs recovery ...but nothing. Odin, flash all *.tar.md5 without problem, but when my tablet reboot, appears samsung galaxy tab 3 's logo again. I can't get the system arrives. Neither arrives to recovery ....
I don't know that I can do more. Helpp pleaseee !!!:crying:
I've got the same problem, but no one ever replies!
Flash custom recovery and format all folders and Odin back with stock ROM
Sent from my SM-T211 using Tapatalk

Categories

Resources