[Q&A] [ROOT-METHOD][Odin] P5210 | Samsung Galaxy Tab 3 10.1 - Galaxy Tab 3 Q&A, Help & Troubleshooting

Q&A for [ROOT-METHOD][Odin] P5210 | Samsung Galaxy Tab 3 10.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROOT-METHOD][Odin] P5210 | Samsung Galaxy Tab 3 10.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

has not worked
hello
im super new to this rooting community
i followed the instructions to the letter
but everytime it boots is gets stuck on the samsung screen
it glows so i know its not frozen

bricked p5210
hey guys,
i tried to root my gt-p5210 by flashing through odin 3.07: CF-Auto-Root-santos10wifi-santos10wifixx-gtp5210 zip file
after the flashing the device got stuck into boot samsung boot logo and repeat restarting.
i didn't make a recovery file and that is my mistake :S
i tried to flash original rom the same problem persists and everytime i log to the boot menu and try to wipe cash the tab restarts immidiatly without wipping , i thaught that is cash problem and i flashed twrp and logged into recovery mode and then wipped all my data and cash "dalvik, system,data" i tried to boot a second original firmware but the problem persists and finaly i installed a custom rom .. once again wipped all data and instaled the new custom rom .. and again ... boot stuck on samsung logo!!
please is there anything i can do to revive my tablet?! thank you
my tablet is made in vietnamm refurb in usa.

kasso16 said:
hey guys,
i tried to root my gt-p5210 by flashing through odin 3.07: CF-Auto-Root-santos10wifi-santos10wifixx-gtp5210 zip file
after the flashing the device got stuck into boot samsung boot logo and repeat restarting.
i didn't make a recovery file and that is my mistake :S
i tried to flash original rom the same problem persists and everytime i log to the boot menu and try to wipe cash the tab restarts immidiatly without wipping , i thaught that is cash problem and i flashed twrp and logged into recovery mode and then wipped all my data and cash "dalvik, system,data" i tried to boot a second original firmware but the problem persists and finaly i installed a custom rom .. once again wipped all data and instaled the new custom rom .. and again ... boot stuck on samsung logo!!
please is there anything i can do to revive my tablet?! thank you
my tablet is made in vietnamm refurb in usa.
Click to expand...
Click to collapse
If it has the US stock ROM and it worked fine before you started. You might try this....it's how I upgraded to KitKat and rooted my 5210
Good luck

I did everything as said in the first post to root but now I'm stuck on boot screen, saying samsung galaxy tab3 and not going anywhere

P5220dxubnh1
Hello, how to root for p5220DXUBNH1 running on kitkat.. 4.4.2

Firmware?
The first download link is for the 7.0" tablet. Does it still work on the 10.1" version? I can't find the US version of the firmware on Sam Mobile, so the other option is my only choice...
Thanks in advance!

Related

[Q&A] [HOW-TO] Unbrick Galaxy Tab 3 10.1

Q&A for [HOW-TO] Unbrick Galaxy Tab 3 10.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [HOW-TO] Unbrick Galaxy Tab 3 10.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Brilliant guide
Thanks for taking the time to post this How-to.
I now have a 'Cellular South' Samsung Tab (csc-code XAR). Much better than the boot-loop lump of crap I made earlier.
Is there a simple way to make this Tab into a UK device, either by changing the csc-code and/or changing firmware to uk version?
Cheers!
Bricked Tab 3 P5200
Hi ive managed to brick my Samsung Tab 3 P5200 its stuck on the Samsung Tab 3 Screen after i tried rooting it, how can i fix this as ive only had the thing a hour and its wrecked already? Thanks
This works great!
Just a post to let everyone know this unbricked my GT-P5210 just fine. Only issue I had was once I ran it through ODIN, I had to factory reset it. Factory reset it and everything is smooth now. . Thanks a ton for everyone's help!
THANK YOU
Thank you so much! I thought I had bricked my Tab to death but your guide saved it. I cannot even describe to you how happy I am right now. Thanks again!
root . zip
File not found on server. And your os file has me stuck on the Samsung screen.
After factory reset it worked. Now I need your root file. Your file is down.
Anyone have the root file from the botton of the first post? Thats all I have left to do. Thanks in advance!!!
Still waiting for a updated link.
Wont work.
Hi! Im not much of a good IT but I really need help for those with knowledge about fixing bricked devices, or having boot loop issues. So my Samsung Galaxy Tab 3 10.1 gt p5200, that's right, it's Galaxy Tab 3. Not 2. I really need help on how to fix my Tablet. The issue is that I ACCIDENTALLY installed a wrong kernel on my Tablet. I forgot to read the important NOTE about the kernel that I was gonna install cus it says it was only for Galaxy NOTE 2. And now My galaxy tab is having a boot loop issue like: When I turn on the Tablet, the Samsung Galaxy Tab 3 logo appears for about 15 seconds, then It turns off by itself, and then It gets back on Samsung Galaxy Tab 3 logo after a few seconds after it has turned off. I had already tried to install Stock ROM using Odin but it still doesnt work. So please help me for fixing this problem. I had this for about 3 weeks and I still cant find a solution. :'( NEED HELP! DESPERATELY! :'( I thank you in advance
GT-p5210 stuck on samsung logo
I followed your instructions and it went to samsung logo mode and is stuck there forever...
It is not going forward...Please help
tab 3 4.2.2 stock recovery after 4.4.2
have tryed twrp so many different ones and so many different offical roms and it still wont install 4.2.2 always keeps reboint with samsung tab 3 coming up will this one install ok on uk version off p5210 am at the end off my tether here please help me grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
samsung galaxy tab3 4 4.4.2 to 4.2.2 successful
Thanks for the share wad stuck on 4.4.2 after trying a few roms though it wasn't possible to get back to 4.2.2 but hey presto really delighted thanks again for the share
Big Thanks
Big Thanks for this, i can use now may break device
Help!
QA Bot said:
Q&A for [HOW-TO] Unbrick Galaxy Tab 3 10.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [HOW-TO] Unbrick Galaxy Tab 3 10.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Click to expand...
Click to collapse
Kind of in a predicament here. I tried rooting my WiFi tab 3 10.1 running 4.4.2, successfully flashing TWRP to then flash the .zip file. Unfortunately it got stuck on the Tab screen. Followed the guide to flash the firmware but it only removed TWRP enabling the stock recovery and on the start up, only getting past the tab screen to get stuck on a never ending Samsung screen with the blue light behind it. I let it sit the first time thinking its just re-setting up because of the firmware but an hour in and nothing, that was just wrong. Tried reflashing the firmware but no luck either. Need help please.
What part
What part do I connect the Tab to the PC?

[Q] Galaxy Tab S "Bricked"? after installing customer rom

Hello Guys,
Need your help.
I have flashed hundreds of roms on my android phones and tablets, but this time something new happened to me:
After installing a t700 Rom using twrp recovery, my tablet got stuck at boot logo, doesn't matter how many resets i try, it never goes beyond the black and whit samsung boot logo!
I have tried to reset using kies, flashed a stock firmware with Odin, etc ect ect, nothing! its still stuck at boot logo.
One curious thing happened, after flashing sock firmwares for the second or third time, the Samsung sounds stops halfway, and then it goes back to the Samsung logo.
Any ideas on how to get out of this nightmare?
Thank you!!
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Samsung Galaxy Tab S
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
Galaxy Tab S Q&A, Help & Troubleshooting
Good luck!
black_coder said:
Hello Guys,
Need your help.
I have flashed hundreds of roms on my android phones and tablets, but this time something new happened to me:
After installing a t700 Rom using twrp recovery, my tablet got stuck at boot logo, doesn't matter how many resets i try, it never goes beyond the black and whit samsung boot logo!
I have tried to reset using kies, flashed a stock firmware with Odin, etc ect ect, nothing! its still stuck at boot logo.
One curious thing happened, after flashing sock firmwares for the second or third time, the Samsung sounds stops halfway, and then it goes back to the Samsung logo.
Any ideas on how to get out of this nightmare?
Thank you!!
Click to expand...
Click to collapse
1. Load up your PC the original stock firmware, which corresponds to your Tab original Region CSC-code according to the model number and serial number of your Tab. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
2. Flash your Tab by Odin c original stock firmware from p.1
Regards
I have seen this before when a tablet gets stuck on the Samsung logo, what you need to do is after flashing your stock firmware using odin, you then need to get into stock recovery and wipe cache and factory reset from within stock recovery and then reboot.

need HELP with "firmware upgrade encountered an issue"

Hello fellow community!
On first place i want to excuse myself for my bad English!!
I have soft bricked T-Mobile (USA) Samsung Galaxy S4 and everything i found in the web DIDN'T help me to recover my phone...
Here is my history for what i did to bring this condition of my phone.
I was on Original T-Mobile 4.4.2 Stock ROM working normal without any issues. But 2 or 3 months ago i was curious about installing on my phone CUSTOM " CYANOGENmod" rom 5.x.x NIGHTY edition. At all installing on that custom ROM was without problems and phone for this 2~3 months works flawlessly "normal"... all this time i updates every day this custom theme and I'm understand this is NIGHTY but at the end i was kind tired from this NOT exactly real and fully functioned replica of custom ROM and get decision to restore my ORIGINAL status of the phone and put latest (4.4.4) Stock ROM. 1st i download 4.4.4 ROM "M919UVUFNK2_M919TMBFNK2_M919UVUFNK2_HOME.tar.md5" for my T-Mobile phone. I put in in DOWNLOAD mode. Connect phone to my computer.. and Start ODIN3 v3.10.6 ( didn't install Samsung drivers because i already have installed them !! ). In AP i put latest ROM... checked was ONLY options Auto Reboot and F. Reset Time ... NO Re-Partition was checked or pit file wasn't given !! Jus i hit the SATRT and receive that !...
everything was fine till the end !!! Flashing stops on try to flash hidden.img.ext4 with error and FAIL all process !!!
I CANT understand where is my problem and what i can do to flash my phone normally?
Please community help me to solve this problem..
1 year ago i have almost the same problem but with the same error "firmware upgrade encountered an issue" and remember here on XDA DEVELOPERS i read the guide how to recovery phone after that but TBH i cant find this guide now with all my searching attempts..
Please for HELP!
and Thank you in Advance for your support!!..
Cheers!
Not 100% sure but you needed to do a factory reset before flashing stock firmware.
You can't flash kitkat over lollipop before doing factory reset because they are two different firmwares.
Try doing a factory reset and flashing again, if it fails pull battery, replace battery and go straight into download mode, connect to pc and flash again with odin.
Sometimes the double flash can be successful.
Good luck.
Pp.
thank you for replay!! but I [SOLVED] my problems!!!
iceBringer said:
thank you for replay!! but I [SOLVED] my problems!!!
Click to expand...
Click to collapse
Would be nice if you could share your solution for others that may have the same problem

Bricked Samsung Galaxy Tab 3 8.0 Please help!!

Hi all !
So two days ago i wanted to update my Sm-t310 to 4.4.2 from the tab itsself, but it wasn't possible, because i had rooted it before. So i tried to remove my root and then something happened and my tab got stuck in firmware upgrade encountered an issue. please select recovery mode in kies & try again charging battery screen.. i looked for solutions with both kies and odin, but they get stuck at 7% while flashing????? Nothing seems to work, i tried it even through the philz recovery mode after wiping cache and deleting cache partition, but it only gets stuck at the boot loop and then when i try to flash it with odin it gets stuck on system.img at about 7%... I really don't know what to do :crying: Please help me, I am desperate !
Hi,
This thread is being moved to your own dedicated forum, where the experts may be able to help you better.
Good luck!
benzomarie said:
Hi all !
So two days ago i wanted to update my Sm-t310 to 4.4.2 from the tab itsself, but it wasn't possible, because i had rooted it before. So i tried to remove my root and then something happened and my tab got stuck in firmware upgrade encountered an issue. please select recovery mode in kies & try again charging battery screen.. i looked for solutions with both kies and odin, but they get stuck at 7% while flashing????? Nothing seems to work, i tried it even through the philz recovery mode after wiping cache and deleting cache partition, but it only gets stuck at the boot loop and then when i try to flash it with odin it gets stuck on system.img at about 7%... I really don't know what to do :crying: Please help me, I am desperate !
Click to expand...
Click to collapse
Since you mentioned that you still have your Philz custom recovery, have you tried flashing a rom. It may or may not work, but it is worth a shot.

GT N7100 no start error. No recovery. No Logo

Hello. I have been using Note 2 GT N7100 for over 3 years now. Have rooted the phone and was running a Crdroid custom ROM on it. It did not give me any problem. Nor did I update the ROM since it was running good.
Suddenly yesterday it got stuck on the Samsung logo. Tried restarting it, but it didn't move ahead of the logo.
Today, it shows a grey and white screen. Fully blurred and can't see the Samsung logo too.
Tried going into the recovery mode, but same grey screen appears.
If I take it in download mode, it goes there. But when I try to install any stock ROM, it doesn't work. It shows failed in Odin.
Please help what can be the possible problem?
If any more information is needed, I will provide it.
Any ROM to install or custom recovery?
Please guide what to do?
Also, I am sorry if there is already some post like this. Please let me know
Thanks in Advance!
http://forum.xda-developers.com/showthread.php?t=2154890
Read this guide to fix soft brick
Sent from my SM-N910C
harsh09046 said:
http://forum.xda-developers.com/showthread.php?t=2154890
Read this guide to fix soft brick
Sent from my SM-N910C
Click to expand...
Click to collapse
Hey thanks for the quick reply. Will try and get back to you.
Need a valid link for Recovery Package
[I moved this post to this section that's more apropriate http://forum.xda-developers.com/showthread.php?t=2154890 ]
Hi guys,
Is there a link for the Recovery Package/ROM ? (the one above doens't work)
My phone is stuck on the boot logo and I need to fix it... (I'm a bit noobish..)
I've had already downloaded those files but i'm not sure that there are the correct files to use in the step 4 of this tutorial (Recovery Package/ROM).
- N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5
- N7100XXUFND3_N7100OXAFND3_XEF.zip
Thank you a lot !
Mimo_0

Categories

Resources