Hey guys, I'm in deep!!! I returned my Note 2 back to stock and made the mistake of doing the AT&T OTA update. When I tried to install a recovery I got the Samsung logo and it's been there ever sense. I've tried to flash, via Odin (multiple versions) the I317UCAMA4 and the I317UCALJ2 firmwares and I still get the samsung logo. When the flash is finished I take the battery out and try to get into recovery mode but it always gets stuck at the Samsung logo. I don't know what else to do. I hope this doesn't mean that the phone is useless; I've bricked and unbricked the phone on multiple occasions. But this time its different. Any help would be appreciated.
Never mind. I found the solution here:
http://forum.xda-developers.com/galaxy-note-2-att/help/stuck-boot-odin-flash-to-stock-t2949408
Related
Hi, I am new in this forum, and I hope someone can help me. My phone is Samsung Note 2 N7100
I tried to install a new OS and it works. Suddenly, my phone reboot a automatically, and then it stuck on the Samsung LOGO.
What's worse, i can't get into recovery mode (I made a screen shot here when i getting into and it has been attached below) so that i can't do anything else.
dgwufan said:
Hi, I am new in this forum, and I hope someone can help me. My phone is Samsung Note 2 N7100
I tried to install a new OS and it works. Suddenly, my phone reboot a automatically, and then it stuck on the Samsung LOGO.
What's worse, i can't get into recovery mode (I made a screen shot here when i getting into and it has been attached below) so that i can't do anything else.
Click to expand...
Click to collapse
Ouch, that's out of my knowledge range
Good luck....i know that feeling when you brick your phone. Makes you want to build a time machine and go back 30 minutes before you screwed up.
u can go to download mode right ? just flash back stock firmware..
Hi there,
i had CM 10.3 on my n7100 installed. After the display was broken and a repair service fixed it, they removed everything back to stock and installed the newest firmware with knox. So i tried to remove knox and root again, but after many hours of try and failure with many tutorials and forum posts im out of ideas.
The note 2 is stuck in the first boot screen. I tried to flash cwm in odin in different versions, everytime its stuck in the boot sceen. Same with stock rom.
Emergency repair in kies ends with error. The only thing i still can is to enter download mode.
Please help me. :crying:
Hello Guys,
Need your help.
I have flashed hundreds of roms on my android phones and tablets, but this time something new happened to me:
After installing a t700 Rom using twrp recovery, my tablet got stuck at boot logo, doesn't matter how many resets i try, it never goes beyond the black and whit samsung boot logo!
I have tried to reset using kies, flashed a stock firmware with Odin, etc ect ect, nothing! its still stuck at boot logo.
One curious thing happened, after flashing sock firmwares for the second or third time, the Samsung sounds stops halfway, and then it goes back to the Samsung logo.
Any ideas on how to get out of this nightmare?
Thank you!!
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Samsung Galaxy Tab S
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
Galaxy Tab S Q&A, Help & Troubleshooting
Good luck!
black_coder said:
Hello Guys,
Need your help.
I have flashed hundreds of roms on my android phones and tablets, but this time something new happened to me:
After installing a t700 Rom using twrp recovery, my tablet got stuck at boot logo, doesn't matter how many resets i try, it never goes beyond the black and whit samsung boot logo!
I have tried to reset using kies, flashed a stock firmware with Odin, etc ect ect, nothing! its still stuck at boot logo.
One curious thing happened, after flashing sock firmwares for the second or third time, the Samsung sounds stops halfway, and then it goes back to the Samsung logo.
Any ideas on how to get out of this nightmare?
Thank you!!
Click to expand...
Click to collapse
1. Load up your PC the original stock firmware, which corresponds to your Tab original Region CSC-code according to the model number and serial number of your Tab. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
2. Flash your Tab by Odin c original stock firmware from p.1
Regards
I have seen this before when a tablet gets stuck on the Samsung logo, what you need to do is after flashing your stock firmware using odin, you then need to get into stock recovery and wipe cache and factory reset from within stock recovery and then reboot.
okay guys I found a few threads on this topic but none of the links for downloads work. I tried to root my phone and when it rebooted it hung up on the Samsung logo I can get into download mode but I could not access the Android menu from the start screen by holding the volume up button I have tried to flash every possibility through ODIN and have had no luck my samsung Knox has the number one next to it so I know its stripped is there any software at all out there to get my phone working again I don't care about the warranty or the operating system I just want to be able to use my phone if somebody can send me a link or two for the correct software for odin software it would be greatly appreciated and I have tried the usual two regular firmware versions and I've had no luck please help and my phone is an SGH-I317 at&t samsung galaxy note 2
flash recovery through ODIN
then try troubleshooting from there.
factory default etc
Please, somebody help me... I have a SM-T705m which I have rooted with android kit kat. After some months I got updated to the Lollipop and it was running ok, but it wasn't updating via OTA anymore.
Well, it happens that today I reset the tablet to the factory mode to sell it, but it was without unrooting, and then it got stuck on the screen saying "just a sec". I went further and tried to download some versions of the firmware and install it on the Odin3 without knowing exactly the number of the version Cause I couldn't turn on the gadget to look. I just got any firmware with the name of my model and my location (Brazil) on the site Sammobile.com....
But bang.... Now I can't turn it on because it is looping on the logo screen.... I tried to download the lollipop firmware and the kit kat..... Could somebody help me? it is looping and I need to sell it tomorrow. I would really appreciate it.
Boot to recovery POWER + VOL UP then factory reset.
Reflash the stock LL firmware.