Hi there,
i had CM 10.3 on my n7100 installed. After the display was broken and a repair service fixed it, they removed everything back to stock and installed the newest firmware with knox. So i tried to remove knox and root again, but after many hours of try and failure with many tutorials and forum posts im out of ideas.
The note 2 is stuck in the first boot screen. I tried to flash cwm in odin in different versions, everytime its stuck in the boot sceen. Same with stock rom.
Emergency repair in kies ends with error. The only thing i still can is to enter download mode.
Please help me. :crying:
Related
Hey guys! I didnt to anything odd to the phone . It was on Stock rom. I was just trying to Titanium backup my old files from a custom rom. just applications. and suddenly phone shut down . the I could go in recovery mode and tried to wipe data , reset phone and boot up again. After that phone stuck on samsung logo. and then I tried to recover stock rom via Odin but odin failed to flash it and I left stuck on download mode. I tried many more. And then it hard bricked (((
Ive been reading forums for any help but they always say JTAG.
I dont have any JTAG opportunity around. In sprint forum, theres a thread talkin about debrickin without jtag using Linux terminal. However I couldnt find any solution fo my att
PLEASE HELPP TO RESCUE MY PHONNEEE (
Hey guys, I'm in deep!!! I returned my Note 2 back to stock and made the mistake of doing the AT&T OTA update. When I tried to install a recovery I got the Samsung logo and it's been there ever sense. I've tried to flash, via Odin (multiple versions) the I317UCAMA4 and the I317UCALJ2 firmwares and I still get the samsung logo. When the flash is finished I take the battery out and try to get into recovery mode but it always gets stuck at the Samsung logo. I don't know what else to do. I hope this doesn't mean that the phone is useless; I've bricked and unbricked the phone on multiple occasions. But this time its different. Any help would be appreciated.
Never mind. I found the solution here:
http://forum.xda-developers.com/galaxy-note-2-att/help/stuck-boot-odin-flash-to-stock-t2949408
Hi, my sister's GT-I9195 got bricked suddenly some days after she OTA upgraded to 4.4.2. As I live in another city, she left the phone thinking it was dead for months.
I noticed it could enter download mode and left it charging then tried every alternative method I found through Odin by flashing different firmwares, and the unbricking guide for BL v1. All of them ended in bootloop, even if I flash a recovery tool like Philz Touch it does not enter the recovery I've just installed, it shows a blue message on top of screen and bootloop again.
I know it is bootloader ap swrev: 2, then I can only flash firmwares with v2 bootloader, but the one recommended is UBUBNE2, and this one has not get me out of bootloop to. The phone is still Knox 0x0 but I don't know if it may help in the question.
If anyone has a light over this I would be very grateful cause I'm stuck now.
vitor6496 said:
Hi, my sister's GT-I9195 got bricked suddenly some days after she OTA upgraded to 4.4.2. As I live in another city, she left the phone thinking it was dead for months.
I noticed it could enter download mode and left it charging then tried every alternative method I found through Odin by flashing different firmwares, and the unbricking guide for BL v1. All of them ended in bootloop, even if I flash a recovery tool like Philz Touch it does not enter the recovery I've just installed, it shows a blue message on top of screen and bootloop again.
I know it is bootloader ap swrev: 2, then I can only flash firmwares with v2 bootloader, but the one recommended is UBUBNE2, and this one has not get me out of bootloop to. The phone is still Knox 0x0 but I don't know if it may help in the question.
If anyone has a light over this I would be very grateful cause I'm stuck now.
Click to expand...
Click to collapse
Hi all, I think have the some problem.
Tried flash several Roms and recovery images (CWN) but the phone stills bootloop.
With ODIN flash dive succes or pass message but same issue after reboot .
When enter in downloading mode i get some information..... "WRITE POTECTION:ENABLED" ,how can i disable this protection ?
AV and firewall disabled.
Any ideas ?
Hi all !
So two days ago i wanted to update my Sm-t310 to 4.4.2 from the tab itsself, but it wasn't possible, because i had rooted it before. So i tried to remove my root and then something happened and my tab got stuck in firmware upgrade encountered an issue. please select recovery mode in kies & try again charging battery screen.. i looked for solutions with both kies and odin, but they get stuck at 7% while flashing????? Nothing seems to work, i tried it even through the philz recovery mode after wiping cache and deleting cache partition, but it only gets stuck at the boot loop and then when i try to flash it with odin it gets stuck on system.img at about 7%... I really don't know what to do :crying: Please help me, I am desperate !
Hi,
This thread is being moved to your own dedicated forum, where the experts may be able to help you better.
Good luck!
benzomarie said:
Hi all !
So two days ago i wanted to update my Sm-t310 to 4.4.2 from the tab itsself, but it wasn't possible, because i had rooted it before. So i tried to remove my root and then something happened and my tab got stuck in firmware upgrade encountered an issue. please select recovery mode in kies & try again charging battery screen.. i looked for solutions with both kies and odin, but they get stuck at 7% while flashing????? Nothing seems to work, i tried it even through the philz recovery mode after wiping cache and deleting cache partition, but it only gets stuck at the boot loop and then when i try to flash it with odin it gets stuck on system.img at about 7%... I really don't know what to do :crying: Please help me, I am desperate !
Click to expand...
Click to collapse
Since you mentioned that you still have your Philz custom recovery, have you tried flashing a rom. It may or may not work, but it is worth a shot.
I normally find a way around some android issues but sort of lost this time so iI need some help please!
Tablet is (was?) rooted and running cm12 plus twarp before the issue. It was running fine other than using a lot of battery.
So after replacing a battery my Note 8 N5110 started a boot loop and sometimes TWARP starts but does not work and it gets back to the boot loop!
I tried first re-load TWARP via odin and it passed but it was still in the bootloop so I tried load the stock firmware via Odin and I am getting failed with a
I have attached a picture of Twarp right before it fails, a picture of Odin with a failed attempt to load the stock firmware and the message I get on the Note 8 custom firmware screen.
Thanks in advance!!!
For the record I found a way out, the only thing that worked on my case was initialize the Tab using Samsung KIES.
Awesome software thanks Samsung, it saved my day and now....back to root and CM13 again
Hello glad you got it working. is it hard to replace the battery in these?