Hi, my tablet is not detected by odin while in recovery mode
I have a gt-n5110 running 4.1.2 and I'm trying to flash the recovery to remove the retail demo. . .
drivers are installed on my pc and its detected while booted up however my recovery <3e> options after holding down power/volume up are:
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
I have even tried installing from my sd card and nothing why is odin not detecting it? please help
thx :/
Grrrrrr!!!
Just figured it out. . . all instructions refer to holding power and volume up to get into download mode however that gets you into recovery but I just found that power and volume down goes to download mode
Thx anyways
Related
Okay so I have in my posession a Iconia A100 and it gets stuck at the white Acer logo. If I hold Vol Up & Power itll say:
Erasing Cache before SD Update...
SD update cmd: recovery
--update_package=SDCARD:uodate.zip
Booting recovery kernel image
It'll just hang there forever. I've tried putting a copy of stock ROM on the Sdcard and renaming it update.zip and it'll just hang there also.
Ive tried the reset button and nothing.
I really dont know what else to try, I'm new with messing with a A100.
The tab was fine, and was powered down normally and now it wont start.
Sent from my SGH-T989 using Tapatalk 2
Make sure you rename it to "update" (zip is the extension, not a part of the name). Also, make sure the file is placed in the root of your external SD card. If this still doesn't work, you could try resetting the tab via the pinhole.
Have you tried a factory reset? Note you will loose all your data on the internal.
With the tablet off, press the volume up (rocker farthest from the corner) and the power button until it vibrates, then release the power button and switch the screen lock back and forth until 'erasing user data' comes up (make sure the volume rocker gets held throughout the process).
Theonew, i tried that before and nothing.
Romman0, I just tried what you said and once Erasing user data pops up, it says something underneath it, and it goes off, vibrates and goes right back to the white Acer logo. It does all of this in less than 5 seconds...
Thanks for the suggestions so far guys
Im still stuck /:
Edit: it says erasing cache under erasing user data and then reboots quickly
Sent from my SGH-T989 using Tapatalk 2
i have the similar problem,
Erasing Cache before SD Update...
SD update cmd: recovery
--update_package=SDCARD:update.zip
Booting recovery kernel image
but don't install noting, i can enter in recovery, but i get a dead android with a red triangle, can navigate with VOL keys, but I can not select anything, dont work, when i press HOME in red triangle i get recovery with this menssage
Android system recovery <3e>
Android system recovery utility
rebbot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
__________________________________________
E:/dev/block/mmcblk1 does not exist
Finding update package...
E:failed to mount /mnt/sdcard (No such file or directory)
E:Can't mount /mnt/sdcard/update.zip
Instalation aborted
i think recovery is damaged
solution?
Howd you boot into recovery? & Im glad Im not the only one but it sucks that you have that problem too.
Sent from my SGH-T989 using Tapatalk 2
For boot in recovery
Make it
On landscape position press volume down + power and hold it
Landscape keys represetation
/.....lockscreen.........volume(-)....volume(+).............................................................................../
/ /
P
O
W
E
R
/
/
/
/
/....................................................................................................................................................../
rollidark said:
i have the similar problem,
Erasing Cache before SD Update...
SD update cmd: recovery
--update_package=SDCARD:update.zip
Booting recovery kernel image
but don't install noting, i can enter in recovery, but i get a dead android with a red triangle, can navigate with VOL keys, but I can not select anything, dont work, when i press HOME in red triangle i get recovery with this menssage
Android system recovery <3e>
Android system recovery utility
rebbot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
__________________________________________
E:/dev/block/mmcblk1 does not exist
Finding update package...
E:failed to mount /mnt/sdcard (No such file or directory)
E:Can't mount /mnt/sdcard/update.zip
Instalation aborted
i think recovery is damaged
solution?
Click to expand...
Click to collapse
It failed because it cannot see your SD Card. Check that it is freshly formatted (FAT32) and is inserted completely. Also make sure that your device is charged, it might turn the card slot off to save power.
Hello everyone,
I got my AT&T HTC M9 yesterday with 1.32.502.9. I unlocked the bootloader and installed TWRP successfully. I tried Installing Android Revolution 4.1 and didn't noticed the installation failed. When I restarted the phone it got stuck on the HTC logo. Someone after messing with the phone I ended up loosing TWRP and I'm back to the stock recovery with only these options:
reboot system now
apply updates from ADB
wipe data/fatory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
apply from phone storage
apply from sd card
My phone is stuck at the logo screen and I cannot sideload or flash anything from the SD memory card or phone storage. My phone gives me an error when I try to flash from the SD card and my computer now does not detect my M9 (all drivers were installed previously as well as the SDK)
I don't want to do anything else yet because I'm afraid I will make things worse. Could any body advice me on how to fix my phone?
Thank you!
I was able to fix it.
Admin: Please delete this thread. Thank you!
tchan said:
I was able to fix it.
Admin: Please delete this thread. Thank you!
Click to expand...
Click to collapse
@tchan how did you fix it? I am in the same situation myself.
MightyRaith said:
@tchan how did you fix it? I am in the same situation myself.
Click to expand...
Click to collapse
You have to switch to the download mode on your M9 and use the fastboot command to flash a custom recovery (TWRP2050 worked for me). Make sure your SDK is up to date and you download and install all the HTC drivers for the M9.
This might help: http://forum.xda-developers.com/one-m9/general/guide-root-install-twrp-htc-one-m9-t3061133
tchan said:
You have to switch to the download mode on your M9 and use the fastboot command to flash a custom recovery (TWRP2050 worked for me). Make sure your SDK is up to date and you download and install all the HTC drivers for the M9.
This might help: http://forum.xda-developers.com/one-m9/general/guide-root-install-twrp-htc-one-m9-t3061133
Click to expand...
Click to collapse
Sadly I cannot enter download mode or recovery mode the phone simply reboots I had TWRP installed with LeeDroid and everything was peachy now I can't do a single thing with it lol.
MightyRaith said:
Sadly I cannot enter download mode or recovery mode the phone simply reboots I had TWRP installed with LeeDroid and everything was peachy now I can't do a single thing with it lol.
Click to expand...
Click to collapse
Shut the phone off,wait 10 seconds then hold volume down and start button. After a few seconds, it wil vibrate, release the buttons and it should start in donwload mode (black background).
MightyRaith said:
Sadly I cannot enter download mode or recovery mode the phone simply reboots I had TWRP installed with LeeDroid and everything was peachy now I can't do a single thing with it lol.
Click to expand...
Click to collapse
Turn on you phone and wait about 10 seconds after seeing the HTC logo. Hold down the volume up button and power button for a few seconds until the phone vibrates, as soon as that happens switch to the volume down button and power button that should put the phone in "download mode." Connect your phone to your PC. On your command prompt you can type "fastboot devices" to check and make sure your phone is good to go. After that, you should be able to flash TWRP which in turn would allow you to flash a custom rom and fix your phone.
tchan said:
Hello everyone,
I got my AT&T HTC M9 yesterday with 1.32.502.9. I unlocked the bootloader and installed TWRP successfully. I tried Installing Android Revolution 4.1 and didn't noticed the installation failed. When I restarted the phone it got stuck on the HTC logo. Someone after messing with the phone I ended up loosing TWRP and I'm back to the stock recovery with only these options:
reboot system now
apply updates from ADB
wipe data/fatory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
apply from phone storage
apply from sd card
My phone is stuck at the logo screen and I cannot sideload or flash anything from the SD memory card or phone storage. My phone gives me an error when I try to flash from the SD card and my computer now does not detect my M9 (all drivers were installed previously as well as the SDK)
I don't want to do anything else yet because I'm afraid I will make things worse. Could any body advice me on how to fix my phone?
Thank you!
Click to expand...
Click to collapse
please be patient
I don`t have m9 now but if you do this solution,maybe your phone boot up again ( this solution works on m8 )
I don`t think your phone bricked or damaged memory
you can do this solution,maybe your phone fixed !
1- charge your phone then update the htc usb driver and adb tools
2- then boot to the bootloader and flash the latest twrp recovery again ( don`t forgot do erase cache)
3- download other rom like viper rom then copy it on the flash memory ( to install rom with otg cable and flash memory)
4-do full wipe ( internal and external memory - system - cache - dalvik cache)
5- install rom from flash memory and do full wipe again in aroma installer
6- then restart your phone and wait to phone boot up again
7- if don`t boot up,go to the bootloader and flash boot.img from rom ( you should extract rom to see it )
after all you can s-off your phone if you like
good work:good:
my_android said:
please be patient
I don`t have m9 now but if you do this solution,maybe your phone boot up again ( this solution works on m8 )
I don`t think your phone bricked or damaged memory
you can do this solution,maybe your phone fixed !
1- charge your phone then update the htc usb driver and adb tools
2- then boot to the bootloader and flash the latest twrp recovery again ( don`t forgot do erase cache)
3- download other rom like viper rom then copy it on the flash memory ( to install rom with otg cable and flash memory)
4-do full wipe ( internal and external memory - system - cache - dalvik cache)
5- install rom from flash memory and do full wipe again in aroma installer
6- then restart your phone and wait to phone boot up again
7- if don`t boot up,go to the bootloader and flash boot.img from rom ( you should extract rom to see it )
after all you can s-off your phone if you like
good work:good:
Click to expand...
Click to collapse
Thanks for replying but I was able to fix my phone a few hours after. Those are the right steps but you're missing some details. HTC has now changed things a bit and added the "download mode." Flashing in bootloader does not work any more.
Glad your all sorted !
Me 2 help !!!!
tchan said:
Hello everyone,
I got my AT&T HTC M9 yesterday with 1.32.502.9. I unlocked the bootloader and installed TWRP successfully. I tried Installing Android Revolution 4.1 and didn't noticed the installation failed. When I restarted the phone it got stuck on the HTC logo. Someone after messing with the phone I ended up loosing TWRP and I'm back to the stock recovery with only these options:
reboot system now
apply updates from ADB
wipe data/fatory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
apply from phone storage
apply from sd card
My phone is stuck at the logo screen and I cannot sideload or flash anything from the SD memory card or phone storage. My phone gives me an error when I try to flash from the SD card and my computer now does not detect my M9 (all drivers were installed previously as well as the SDK)
I don't want to do anything else yet because I'm afraid I will make things worse. Could any body advice me on how to fix my phone?
Thank you!
Click to expand...
Click to collapse
Everytime i try to send commands its does not respond , adb devices=NOTHING adb get-state=NOTHING
what did u flash ? When i reboot it only shows a red triangle with a exclamation point and now my computer does not detect my m9
Also have tried to start the RUU from the htc website with no luck it only goes as far a the accept licseing
May be you have to update adb/fastboot or your Htc's drivers...
tchan said:
Hello everyone,
I got my AT&T HTC M9 yesterday with 1.32.502.9. I unlocked the bootloader and installed TWRP successfully. I tried Installing Android Revolution 4.1 and didn't noticed the installation failed. When I restarted the phone it got stuck on the HTC logo. Someone after messing with the phone I ended up loosing TWRP and I'm back to the stock recovery with only these options:
reboot system now
apply updates from ADB
wipe data/fatory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
apply from phone storage
apply from sd card
My phone is stuck at the logo screen and I cannot sideload or flash anything from the SD memory card or phone storage. My phone gives me an error when I try to flash from the SD card and my computer now does not detect my M9 (all drivers were installed previously as well as the SDK)
I don't want to do anything else yet because I'm afraid I will make things worse. Could any body advice me on how to fix my phone?
Thank you!
Click to expand...
Click to collapse
I cant enter recovery mood or download mode adb is not reconized i even tryed adb get-state and nothing shows up
tried to sideload and when its done is say e:veracation failed then show this screen again
You're best sending it to htc.
Sent from my HTC One M9 using Tapatalk
I rooted my phone. But accidentally deleted my OS. Before flashing with a new ROM, i wiped off the cache/system/Dalvik cache.
When i tried flashing my device, i got some failure. So, i tried to reboot my device.
But, now i am not able to get into bootloader mode. The device is stuck at home screen with HTC logo and is unresponsive. Nor the power button is working to shut it off. I have to wait to get the battery drained.
Also, Vol Dwn+Power is not working to move it to Fastboot mode, so dat i can recover with my TWRP backup.
Also, i have seen that when the device is powered off, i can access the storage using USB, but can't access it when it is powered ON.
I thought of trying flashing RUU but for that i guess i need USB access to device while it is powered ON.
Please suggest me how to resolve this issue.
Thanks in advance
GeekyNitish said:
I rooted my phone. But accidentally deleted my OS. Before flashing with a new ROM, i wiped off the cache/system/Dalvik cache.
When i tried flashing my device, i got some failure. So, i tried to reboot my device.
But, now i am not able to get into bootloader mode. The device is stuck at home screen with HTC logo and is unresponsive. Nor the power button is working to shut it off. I have to wait to get the battery drained.
Also, Vol Dwn+Power is not working to move it to Fastboot mode, so dat i can recover with my TWRP backup.
Also, i have seen that when the device is powered off, i can access the storage using USB, but can't access it when it is powered ON.
I thought of trying flashing RUU but for that i guess i need USB access to device while it is powered ON.
Please suggest me how to resolve this issue.
Thanks in advance
Click to expand...
Click to collapse
Hi Guys,
I sorted out the issue. Thanks to various information available which i need to put in together to fix.
FIrst of all, the good thing is that i had the TWRP recovery.
I was able to move into Fastboot mode once the device is switched off.
Steps i followed::
1) Place the TWRP backup in the sd card in the proper directory structure.
TWRP -> BACKUPS-> [phone's serial number] -> ROMName
2) Volume up+power button to shut it off.
3) Volume Down+power button to move to Fastboot mode.
4) Select Recovery. You will be moved to TWRP manager.
5) Select Restore there and select the proper recovery folder which u had copied in the sd card.
6) You are done!! BINGO
For those who don't have TWRP backup, they can flash it with a proper ROM available by simply placing the ROM zip in the sd card, wipe the cache from TWRP manager. Select Install from TWRP manager and select the ROM zip and you are done flashing with the new ROM.
While trying to flash a ROM , I formatted the system partition through TWRP and accidentally rebooted the phone. I was running MIUI 7 in the phone previously. I have TWRP backup of system and boot but the phone is stuck at bootlogo and power button volume down combo fires factory mode. I guess I deleted both the recovery and the OS. Phone is getting charged , as the battery indicator is displayed when plugged. Is there anyway to recover my A1?
Sorry if the question is a repeat. Any help would be appreciated.
FridayEagle said:
While trying to flash a ROM , I formatted the system partition through TWRP and accidentally rebooted the phone. I was running MIUI 7 in the phone previously. I have TWRP backup of system and boot but the phone is stuck at bootlogo and power button volume down combo fires factory mode. I guess I deleted both the recovery and the OS. Phone is getting charged , as the battery indicator is displayed when plugged. Is there anyway to recover my A1?
Sorry if the question is a repeat. Any help would be appreciated.
Click to expand...
Click to collapse
yo man,
first of all for getting into recovery mode is ; power off your device > wait few seconds > then press power + volume up button, there you go.
then, if youve wiped your device's system partitions via twrp , nothin to worry, just download any rom, put it to your sd card, reboot recovery, wipe everything except sd card, choose downloaded zip to flash, swipe to confirm, once the flashing rom completes reboot your device. :good:
Merry Christmas to everyone!
I was trying to flash a new ROM to my X800 with TWRP v. 2.8.7.0 but by mustake i wipe the internal memory!
After that somhow i erase the TWRP also!!
So now i have only the stock recovery mode and i have stuck in the recovery screen because the phone is empty i suppose...
How can i save it and load a new ROM ??
When i press vol- & power i see the penguin icon and i hear a sound from my laptop but it is recognized as a non-defined android device...
Any help??
sakout said:
Merry Christmas to everyone!
I was trying to flash a new ROM to my X800 with TWRP v. 2.8.7.0 but by mustake i wipe the internal memory!
After that somhow i erase the TWRP also!!
So now i have only the stock recovery mode and i have stuck in the recovery screen because the phone is empty i suppose...
How can i save it and load a new ROM ??
When i press vol- & power i see the penguin icon and i hear a sound from my laptop but it is recognized as a non-defined android device...
Any help??
Click to expand...
Click to collapse
After many tries i manage to reload TWRP 3.0.2-0
I download a ROM ( 1523510744_X1_X800-CN-FN-BEXCNFN5902803208S-5.9.028S ) and i try to install it from the install menu.
When the operation finishes and try to reboot system the phone enter again in Recovery mode...
Any help?
sakout said:
After many tries i manage to reload TWRP 3.0.2-0
I download a ROM ( 1523510744_X1_X800-CN-FN-BEXCNFN5902803208S-5.9.028S ) and i try to install it from the install menu.
When the operation finishes and try to reboot system the phone enter again in Recovery mode...
Any help?
Click to expand...
Click to collapse
Try to install original CN 20s from here: https://www.mediafire.com/file/3ktjygl15282hr6/X1_X800-CN-FN-BEXCNFN5902012221S-5.9.020S.zip/file
It will erase everithing! also recovery! so you will need to install TWRP again after this. It contains also firmware!
Here is also Cuoco92's tool v2: https://www.mediafire.com/file/6hs8fr17bioxxf9/Le1Pro_CN_CUOCO92_TOOLS_v2.7z/file
For transfering files to phone you can use an OTG cable +USB stick or through adb: https://www.themefoxx.com/2018/06/adb-file-copy-android.html