Related
Hi Dudes and Dudettes.
PLease go easy on me - I am a noob.
Ive been handed a HTC ONE X (International version) that is stuck in aboot loop.
On power on, it simply goed to cyanogen load screen, and stays there forever (till the battery runs out or the phone is powered down)
I dont know what has been done to this phone, but I do know the following:
1. It seems to be rooted (Says UNLOCKED in Fastboot/bootloader screen)
2. Has CWM installed, can access it via Recovery.
3. Can not be restored via Backup/Recovery in CWM.
4. Does not have any roms on the device (tried zip file recovery - doesnt work)
5. Wiping of caches doesnt help.
6. Factory reset doesnt work either.
So I am thinking that I should prolly get a rom on the device and install it.
My question is HOW do I get a ROM on this phone if it is stuck in a loop?
Seem like windows picks it up (its visible in device manager) but doesnt show up as a drive in my computer.
Any help will be greatly appreciated.
Cheers!
heinrichvr said:
Hi Dudes and Dudettes.
PLease go easy on me - I am a noob.
Ive been handed a HTC ONE X (International version) that is stuck in aboot loop.
On power on, it simply goed to cyanogen load screen, and stays there forever (till the battery runs out or the phone is powered down)
I dont know what has been done to this phone, but I do know the following:
1. It seems to be rooted (Says UNLOCKED in Fastboot/bootloader screen)
2. Has CWM installed, can access it via Recovery.
3. Can not be restored via Backup/Recovery in CWM.
4. Does not have any roms on the device (tried zip file recovery - doesnt work)
5. Wiping of caches doesnt help.
6. Factory reset doesnt work either.
So I am thinking that I should prolly get a rom on the device and install it.
My question is HOW do I get a ROM on this phone if it is stuck in a loop?
Seem like windows picks it up (its visible in device manager) but doesnt show up as a drive in my computer.
Any help will be greatly appreciated.
Cheers!
Click to expand...
Click to collapse
flash this custom recovery link
then go into recovery
connect your phone to PC or laptop
select USB mass storage in recovery
copy rom file into sd card
and flash rom in recovery
extract boot.img from rom.zip file in pc or lappy
flash boot.img in fastboot mode
and good to go..!!:good:
Poojan Patel said:
flash this custom recovery link
then go into recovery
connect your phone to PC or laptop
select USB mass storage in recovery
copy rom file into sd card
and flash rom in recovery
extract boot.img from rom.zip file in pc or lappy
flash boot.img in fastboot mode
and good to go..!!:good:
Click to expand...
Click to collapse
Thanks, i am going to try that now.
Not sure how to flash the custom recovery, but sure ill figure it out.
Will let you know.
thanks!
Shot a lot mate!
Its working. Must have been the img file.
Thanks!!!
Hello!
My Oppo Find 7 (international) seems to be bricked.
I'm on stock ROM COS 1.2.5 with stock recovery 1.0
After booting it stuck in the Setup-Wizzard with "settings has stopped"-Loop.
Unfortunately in stock-ROMs the USB-debugging is disabled, so i can't acces via adb fastboot to flash other recoverys.
And cause of the loop i can not enable USB-debugging...
The recovery (stock 1.0) let me only flash 1.2.5, no other ROMs work.
Things that work:
- entering fastboot (but no access via adb as i wrote)
- entering recovery and execute "zip from sd" (while sd means only internal sd here)
- normal boot to the f****** Setup-Assistant, enter PIN. At slect Language the "setting has stopped"-loop starts
- while the device is in loop, i can access the internal and external SD-card via PC, copy and delete files works
Please, has anybody an idea what to do ?
Thanks to all
Marco
Since you can get into fastboot, download a custom recovery, go to fastboot, type
fastboot flash recovery x
Replacing x with the full name and extension of the file, and install a ROM. Alternatively, if you want ColorOS, try downloading 1.2.4i, and installing it through the stock recovery. Then you can update from there
Hmmmm....
Positive! At this moment i learned that USB-debugging is needed for adb-access on a booted device, not for fastboot-access
Yes, i could flash TWRP via fastboot (puuhh, not bricked)
THANKS !!
Now i can mess around the "settings has closed"-Loop, wich is still in place.
(No wiping fixes the problem, even 1.2.1 nor 1.2.3 or whatever)
But i'm on the road again and can check out fixes.
Thanks again!!
That's weird. Did you ever install custom ROMs before having this issue?
Did you try formatting System in TWRP? But be careful, when you format System you have to install stock Color OS BEFORE rebooting your device. That means stay in TWRP after you format and install the ROM, then reboot.
Hello everyone,
I got my AT&T HTC M9 yesterday with 1.32.502.9. I unlocked the bootloader and installed TWRP successfully. I tried Installing Android Revolution 4.1 and didn't noticed the installation failed. When I restarted the phone it got stuck on the HTC logo. Someone after messing with the phone I ended up loosing TWRP and I'm back to the stock recovery with only these options:
reboot system now
apply updates from ADB
wipe data/fatory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
apply from phone storage
apply from sd card
My phone is stuck at the logo screen and I cannot sideload or flash anything from the SD memory card or phone storage. My phone gives me an error when I try to flash from the SD card and my computer now does not detect my M9 (all drivers were installed previously as well as the SDK)
I don't want to do anything else yet because I'm afraid I will make things worse. Could any body advice me on how to fix my phone?
Thank you!
I was able to fix it.
Admin: Please delete this thread. Thank you!
tchan said:
I was able to fix it.
Admin: Please delete this thread. Thank you!
Click to expand...
Click to collapse
@tchan how did you fix it? I am in the same situation myself.
MightyRaith said:
@tchan how did you fix it? I am in the same situation myself.
Click to expand...
Click to collapse
You have to switch to the download mode on your M9 and use the fastboot command to flash a custom recovery (TWRP2050 worked for me). Make sure your SDK is up to date and you download and install all the HTC drivers for the M9.
This might help: http://forum.xda-developers.com/one-m9/general/guide-root-install-twrp-htc-one-m9-t3061133
tchan said:
You have to switch to the download mode on your M9 and use the fastboot command to flash a custom recovery (TWRP2050 worked for me). Make sure your SDK is up to date and you download and install all the HTC drivers for the M9.
This might help: http://forum.xda-developers.com/one-m9/general/guide-root-install-twrp-htc-one-m9-t3061133
Click to expand...
Click to collapse
Sadly I cannot enter download mode or recovery mode the phone simply reboots I had TWRP installed with LeeDroid and everything was peachy now I can't do a single thing with it lol.
MightyRaith said:
Sadly I cannot enter download mode or recovery mode the phone simply reboots I had TWRP installed with LeeDroid and everything was peachy now I can't do a single thing with it lol.
Click to expand...
Click to collapse
Shut the phone off,wait 10 seconds then hold volume down and start button. After a few seconds, it wil vibrate, release the buttons and it should start in donwload mode (black background).
MightyRaith said:
Sadly I cannot enter download mode or recovery mode the phone simply reboots I had TWRP installed with LeeDroid and everything was peachy now I can't do a single thing with it lol.
Click to expand...
Click to collapse
Turn on you phone and wait about 10 seconds after seeing the HTC logo. Hold down the volume up button and power button for a few seconds until the phone vibrates, as soon as that happens switch to the volume down button and power button that should put the phone in "download mode." Connect your phone to your PC. On your command prompt you can type "fastboot devices" to check and make sure your phone is good to go. After that, you should be able to flash TWRP which in turn would allow you to flash a custom rom and fix your phone.
tchan said:
Hello everyone,
I got my AT&T HTC M9 yesterday with 1.32.502.9. I unlocked the bootloader and installed TWRP successfully. I tried Installing Android Revolution 4.1 and didn't noticed the installation failed. When I restarted the phone it got stuck on the HTC logo. Someone after messing with the phone I ended up loosing TWRP and I'm back to the stock recovery with only these options:
reboot system now
apply updates from ADB
wipe data/fatory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
apply from phone storage
apply from sd card
My phone is stuck at the logo screen and I cannot sideload or flash anything from the SD memory card or phone storage. My phone gives me an error when I try to flash from the SD card and my computer now does not detect my M9 (all drivers were installed previously as well as the SDK)
I don't want to do anything else yet because I'm afraid I will make things worse. Could any body advice me on how to fix my phone?
Thank you!
Click to expand...
Click to collapse
please be patient
I don`t have m9 now but if you do this solution,maybe your phone boot up again ( this solution works on m8 )
I don`t think your phone bricked or damaged memory
you can do this solution,maybe your phone fixed !
1- charge your phone then update the htc usb driver and adb tools
2- then boot to the bootloader and flash the latest twrp recovery again ( don`t forgot do erase cache)
3- download other rom like viper rom then copy it on the flash memory ( to install rom with otg cable and flash memory)
4-do full wipe ( internal and external memory - system - cache - dalvik cache)
5- install rom from flash memory and do full wipe again in aroma installer
6- then restart your phone and wait to phone boot up again
7- if don`t boot up,go to the bootloader and flash boot.img from rom ( you should extract rom to see it )
after all you can s-off your phone if you like
good work:good:
my_android said:
please be patient
I don`t have m9 now but if you do this solution,maybe your phone boot up again ( this solution works on m8 )
I don`t think your phone bricked or damaged memory
you can do this solution,maybe your phone fixed !
1- charge your phone then update the htc usb driver and adb tools
2- then boot to the bootloader and flash the latest twrp recovery again ( don`t forgot do erase cache)
3- download other rom like viper rom then copy it on the flash memory ( to install rom with otg cable and flash memory)
4-do full wipe ( internal and external memory - system - cache - dalvik cache)
5- install rom from flash memory and do full wipe again in aroma installer
6- then restart your phone and wait to phone boot up again
7- if don`t boot up,go to the bootloader and flash boot.img from rom ( you should extract rom to see it )
after all you can s-off your phone if you like
good work:good:
Click to expand...
Click to collapse
Thanks for replying but I was able to fix my phone a few hours after. Those are the right steps but you're missing some details. HTC has now changed things a bit and added the "download mode." Flashing in bootloader does not work any more.
Glad your all sorted !
Me 2 help !!!!
tchan said:
Hello everyone,
I got my AT&T HTC M9 yesterday with 1.32.502.9. I unlocked the bootloader and installed TWRP successfully. I tried Installing Android Revolution 4.1 and didn't noticed the installation failed. When I restarted the phone it got stuck on the HTC logo. Someone after messing with the phone I ended up loosing TWRP and I'm back to the stock recovery with only these options:
reboot system now
apply updates from ADB
wipe data/fatory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
apply from phone storage
apply from sd card
My phone is stuck at the logo screen and I cannot sideload or flash anything from the SD memory card or phone storage. My phone gives me an error when I try to flash from the SD card and my computer now does not detect my M9 (all drivers were installed previously as well as the SDK)
I don't want to do anything else yet because I'm afraid I will make things worse. Could any body advice me on how to fix my phone?
Thank you!
Click to expand...
Click to collapse
Everytime i try to send commands its does not respond , adb devices=NOTHING adb get-state=NOTHING
what did u flash ? When i reboot it only shows a red triangle with a exclamation point and now my computer does not detect my m9
Also have tried to start the RUU from the htc website with no luck it only goes as far a the accept licseing
May be you have to update adb/fastboot or your Htc's drivers...
tchan said:
Hello everyone,
I got my AT&T HTC M9 yesterday with 1.32.502.9. I unlocked the bootloader and installed TWRP successfully. I tried Installing Android Revolution 4.1 and didn't noticed the installation failed. When I restarted the phone it got stuck on the HTC logo. Someone after messing with the phone I ended up loosing TWRP and I'm back to the stock recovery with only these options:
reboot system now
apply updates from ADB
wipe data/fatory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
apply from phone storage
apply from sd card
My phone is stuck at the logo screen and I cannot sideload or flash anything from the SD memory card or phone storage. My phone gives me an error when I try to flash from the SD card and my computer now does not detect my M9 (all drivers were installed previously as well as the SDK)
I don't want to do anything else yet because I'm afraid I will make things worse. Could any body advice me on how to fix my phone?
Thank you!
Click to expand...
Click to collapse
I cant enter recovery mood or download mode adb is not reconized i even tryed adb get-state and nothing shows up
tried to sideload and when its done is say e:veracation failed then show this screen again
You're best sending it to htc.
Sent from my HTC One M9 using Tapatalk
Latest TWRP recovery and root for Lenovo a7000 marshmallow firmware.
Download and unzip TWRP and SP Flash tool on PC.
Copy the SuperSU.-v71zip in your phone which you will find in the TWRP .zip file.
Run SP flash tool and In the menu Option tab, go to Download, and put a tick in the DA DL All with Checksum".
choose scatter in the TWRP folder and then select "Download only" and click download.
Now power off the phone and connect the USB cable.
The process will start and after completion, a box will appear with done written on it.
Then Boot into recovery (Power + half a second the two volume buttons).
Now you are on TWRP RECOVERY.
For Rooting: Now select install zip and then navigate to SuperSU-v2.71.zip
reboot.
Download TWRP Recovery 3.0.2-1:click here
Download Latest SP Flash Tool: click here
NOTE: IF YOU ARE USING THIS FOR CUSTOM ROM THEN UNTICK THE BOOT.img IN SPFLASH TOOL WHILE FLASHING THE TWRP OTHERWISE YOUR DEVICE COULD BE IN BOOT LOOP STATE. (FLASH STOCK ROM TO FIX)
FOR STOCK ROM NO NEED TO UNCHECK
Yeah! ☺ Will be trying it later. Thanks for the link.
What about 'CWM Recovery' ?
If one succeeds with this TWRP and rooting, then I think one can change TWRP to CWM using flashify or Rashr, provided he/she should confirm that the 'CWM Recovery' will work on Lenovo A 7000 a with android 6.0 OS. But I do not know if the 'CWM' recovery thatwas used earlier when we were on android 5.0, will still work with android 6.0 or not. Can anybody confirm?
this is working men thanks:angel:
Like a charm
Sent from my Lenovo A7000-a using XDA-Developers mobile app
Lenovo A7000 Marshmallow STOCK FIRMWARE
Flash via spflash tool
http://forum.xda-developers.com/android/development/lenovo-a7000-as223160405-row-andoid-6-0-t3360467/post66404777#post66404777
Does backup and restore works on this twrp?
milankumarn said:
Does backup and restore works on this twrp?
Click to expand...
Click to collapse
Yes it support backup and restore.
Worked for me. Thanks a lot!
I have a big problem ...
Few days ago My phone give me option to update to android 6.0 .(Lenovo a7000)
Downloading update package and press update.
When i press update ,phone is immediatly reboot to twrp and thats it .... That all
Nothing happening... rebooting phone and then get message ,update failing and update package automaticaly erased from phone.
Is anything i doing wrong ?
Thanks ,
Regards from Slovenia
Flashed the recovery as instructed, but when I boot into recovery and select Install, Supersu. Zip does not show up even though it is on the phone.
Please help
chabot said:
I have a big problem ...
Few days ago My phone give me option to update to android 6.0 .(Lenovo a7000)
Downloading update package and press update.
When i press update ,phone is immediatly reboot to twrp and thats it .... That all
Nothing happening... rebooting phone and then get message ,update failing and update package automaticaly erased from phone.
Is anything i doing wrong ?
Thanks ,
Regards from Slovenia
Click to expand...
Click to collapse
Use the stock rom found here to go back to factory settings using the stock marshmallow rom. Make sure that you flash using SP Flash Tool as instructed in the link. This will replace TWRP with stock recovery.
Afterwards, you can reinstall TWRP and root,etc.
Sent from my Lenovo K50-t5 using XDA-Developers mobile app
after flashing and rooting i format my sdcard as internal and i notice that no zip/img file appear on twrp. has anyone encounter the same problem?
Unable to Root!
Flashed the recovery as instructed, but when I boot into recovery and select Install, Supersu. Zip does not show up even though it is on the phone. It shows the folder but not as a Zip file.
Please help
dan_daniel04 said:
Flashed the recovery as instructed, but when I boot into recovery and select Install, Supersu. Zip does not show up even though it is on the phone. It shows the folder but not as a Zip file.
Please help
Click to expand...
Click to collapse
I think you have place the supersu zip in external and locating in internal.
I have tested the recovery and it's working fine
Thanks :good::good::good::good:
Hello any way to root without flashing twrp?
PB1974 said:
Flashed the recovery as instructed, but when I boot into recovery and select Install, Supersu. Zip does not show up even though it is on the phone.
Please help
Click to expand...
Click to collapse
I think you have copied the SuperSU-v71.zip in external storage and in TWRP you are searching in internal storage.If it is so the paste it in internal or change storage selection at the time of installing zip.
And paste the zip in root of the storage not in any folder.
As i can see this is your 1st post.
I think this will help you.
Mounting issue with TWRP
After switching sdcard as internal storage. The file manager only shows the ext. Sdcard so from where we can access the internal Sdcard to put that Supersu.zip.And the TWRP only mount only internal Sdcard. Not able to mount ext. Sdcard plz. Help!
Hey can i flash this supersu.zip via twrp 3.02-1?
Couple hours ago i flashed supersu.zip from lenovo a7000 indonesia group, and all i got was bootloop. Is it possible that with this supersu i could get another bootloop? Thanks
Hello friends
I had a problem with the mini z11, I have a hard brick.
I wonder if there is any recovery rom, or if the official serves me.
I can flash by nubia Toolstudio?
the terminal does not turn black screen on or enters recovery, flash a rom confusion mini z9.
I need help please, if you recognize the terminal QHUSB_BULK is hope.
Thank you for your interest, Greetings
Still a little bit early for Z11 Mini...
Did you unlock bootloader, rooted and installed some recovery?
Bricked device nubia z11 mini
Hi Guys,
I was looking to update the Nubia to v 2.04 from 1.40 so I used flashify to flash the stock recovery (worked earlier) but the system went dead.
I used tool studio to get the recovery back but now it is not reading my internal storage where the files are kept, it suggest mount error with system, data etc .... so what could be a way forward?
pratikbr9 said:
Hi Guys,
I was looking to update the Nubia to v 2.04 from 1.40 so I used flashify to flash the stock recovery (worked earlier) but the system went dead.
I used tool studio to get the recovery back but now it is not reading my internal storage where the files are kept, it suggest mount error with system, data etc .... so what could be a way forward?
Click to expand...
Click to collapse
Just flash twrp from pc and go to recovery
Then mount usb storage and copy the rom.zip and flash it
moha07 said:
Just flash twrp from pc and go to recovery
Then mount usb storage and copy the rom.zip and flash it
Click to expand...
Click to collapse
Now I have flashed rom v 1.32 , it is showing splash screen but it hangs at "Be Yourself screen", adb is also not detecting the device to install twrp through pc. Please share some detailed guideline.
pratikbr9 said:
Now I have flashed rom v 1.32 , it is showing splash screen but it hangs at "Be Yourself screen", adb is also not detecting the device to install twrp through pc. Please share some detailed guideline.
Click to expand...
Click to collapse
Follow this guide to flash twrp, use the vendor id from below guide
https://forum.xda-developers.com/android/development/recovery-unofficial-twrp-3-0-2-zte-t3550995
Then u flash the rom.
Before flashing the rom, wipe everything expect internal storage and sd card
Need persist.img
Hi,
Have got to know persist.img is corrupt. Hence, flashing is happening but no booting even twrp is not helping. Persist.img is usually found in fastboot img of the rom which helps to install rom in fastboot mode. Kindly do let me know if I can find fastboot.img of Nubia z11 mini.
Thank you
Hello guys,
i have the same brick mode as the op.
The system doesn't recognize the mobile, it only shows it as QHUSB_BULK and it keeps disconnecting.
What are the steps to follow from the pc?
I found somewhere one software called one click unbrick but when i try to install the drivers with it it says that "the system policy has been modified to reject unsigned drivers".
If i can take it to the place where the phone is recognized as a storage from the pc then i can take it from there.
Thanks
Unbrick and downgrade
I once brick my nubia the same way. BUT NOW ITS ALIVE AND WORKS FINE (sulking why didn't I bought the ZUK 2 even though at the time i bought z11mini they were similarly priced)
UNBRICKING:-
ALL you have to do is download the same firmware which was installed prior to the rom to which you downgraded to [ simply put if you had v2.40 running before and tried to install v1.40 then download the v2.40 rom for flashing), once downloaded {USE A PC OR MAC TO DOWNLOAD THE ROM OR ELSE IT MIGHT GET CORRUPT} copy it to the root of an sd card(2gb upto 32gb; sdxc cards may not work), insert the sd card into the phone , then press and hold the power button until the phone reboots, as soon as you see the bootlogo press and hold vol- and power keys simultaneously, you wold boot into nubia recovery now select update from sd card confirm and let it install as soon as update finishes your phone will boot back up normally. [UP TILL THIS POINT NO FILES WOULD BE LOST].
NOW YOUR PHONE WILL BE WORKING AGAIN.
DOWNGRADING:-
YOU DON'T NEED ANY EXTERNAL SOFTWARE FOR THIS
JUST DOWNLOAD THE ROM U WANT TO INSTALL AND PLACE INTO SD CARD AS ABOVE.
TAKE A BACKUP AND SAVE ON A PC, ANOTHER PHONE OR ANOTHER SD CARD{not the same one} OR ANYWHERE ELSE SAFE cause after this everything inside your phone will be DELETED.
BOOT INTO RECOVERY as STATED ABOVE.
-ATTENTION- DON'T install the rom as yet.
FIRST WIPE cache and data.
SECOND- INSTALL THE ROM SIMILARLY AS PRESCRIBED ABOVE.
THE SYSTEM WILL INSTALL AND REBOOT.
ENJOY{but why are you so eager to downgrade your system, i was once as well but after downgrade to lollipop.....nothing......performance was same as on Marshmallow.
ADVICE- for some reason the ota updater never shows any new updates, you will have to download updated roms from nubia website to install using recovery{the app has option to apply local update but it does nothing and gets stuck on nubia logo, u will have to restart your phone after that}, as long as you are installing updates u don't need to wipe data and cache and also your files will remain intact. BUT TO THIS ONLY EXCEPTION IS V2.06, on this you do not need to wipe data and cache but the rom itself will wipe all data on your phone so be careful. :good:
NUBIA Z11 mini is Dead
pratikbr9 said:
Hi Guys,
I was looking to update the Nubia to v 2.04 from 1.40 so I used flashify to flash the stock recovery (worked earlier) but the system went dead.
I used tool studio to get the recovery back but now it is not reading my internal storage where the files are kept, it suggest mount error with system, data etc .... so what could be a way forward?
Click to expand...
Click to collapse
I Have the same problem in my Nubia z11 mini , its already dead only it recognize when it connected to PC as QHSUSB_BULK ,
i have tried to flash through QFIL but no use ,
View attachment 4753025
pratikbr9 said:
Now I have flashed rom v 1.32 , it is showing splash screen but it hangs at "Be Yourself screen", adb is also not detecting the device to install twrp through pc. Please share some detailed guideline.
Click to expand...
Click to collapse
Please tell me how to flash TWRP with this condition my device recognize only QHSUSB_BULK in the device manager ,
NO boot loader and recovery mode