Develop Bugs

Boot looping issue

Was messing around with my phone flashing roms to see what I liked best and got too far ahead of myself and forgot to wipe data and cache. Now, I'm stuck in some kind of "boot loop" and can't get back into ClockWorkRecovery(Via root) to perform a restore. My computer just isn't recognizing that I have my phone connected now although it did previously. Is there anything I can do in this situation, or am I basically screwed?
Edit: I solved the issue on my own, it just took lots of playing around and disconnecting/reconnecting before I was able to get back into CWR. If a mod sees this, go ahead and delete this thread it has no purpose.

HELP
Please, i have the same issue
My phone has been bootlooping for a week now, so much i decided to give up.
Please please please tell me how you got back to clockwork and then from there what to do
Thank you so so much in advance

My guess, and this is only a guess, is to try the following.
Assuming you have already flashed the ENG build...
1. Place a new update.zip (clockwork recovery) onto root of the phone's SD card (probably using a card reader, just to be on the safe side).
1.5 Turn the Phone off, if it's on.
2. Hold down Volume Down + Power Button to turn on the phone and boot into the phone's default recovery.
3. Press Volume Up + Power button to get the selectable menu.
4. Select the "Apply update.zip" option (2nd one down).
5. This should boot you into the Clockwork Recovery.
From there, locate the ROM you want to use that's meant for the Slide (like SlidemeRoot 5).
1. Download the ROM.
2. Navigate to the mount menu in clockwork and select the option to mount the card as USB Mass Storage.
3. Plug the phone into the PC (via USB cable).
4. Copy the ROM to the card.
(My trick here is to redownload ROMs. I've seen my phone bootloop when the ROM doesn't download all the way.)
1. Unmount USB.
2. Navigate to the Wipe Data/Factory Reset option.
3. Select Yes from the menu to wipe everything.
4. Locate the install any zip option and install the ROM
5. When that's done, select the reboot option.
From here, you can just leave the phone alone until it boots. If you worry or want to watch, use adb to watch the logs.
1. In command prompt, navigate to where you have ADB installed.
2. type in: adb logcat
3. Enjoy.
For me, the first boot for SlidemeRoot took at least a minute. I could see the logs rolling along, so I just left it alone until the logs slowed down and then stopped. By then, the phone looked like it was ready to go (complete with normal screen, signal, and everything).

I did the same thing, but I havent flashed my rom with the eng build, is there anything I can do, or is my phone hosed? My phone wont boot, and I cant get it to boot up in clockwork, so I cant reflash it...

Failed Root; Stuck in Loop "process com.google.process.gapps has stopped"

Hello and thank you for taking time to read this post.
I attempted to root my At&t Samsung Galaxy S3 today then install tha AOKP Rom, and it back fired due to poor instruction, and poor execution. At the moment my phone, whenever it turns on "inititing swager" (with a pink horse and gears) then gives me a pop-up saying "Unfortunatly the process com.google.process.gapps has been stopped." and "Unfortunately, Setup Wizard has stopped". Whenever I hit ok, the other shows up. I have access to the pull down menu, but can't open any of the links on it. I can also shut it off then get back to the root(hat menu) menu. From which I have tried the option "wipe data/Factory Reset" link, but that changes nothing when I reboot. At this point I am just looking for a way to get it back to factory settings or at least working!
How I got here:
1. Rooted the phone through my computer (successfully it seemed)
-Using this tutorial: /watch?v=bIUA1IxiJzo
2.Started puting AOPK on!
(with this: /watch?v=qzcR-G7EKSw
Look, I know none of you have to help me but any feedback will be greatly appreciated.
P.S. I hav looked through other forums about the gapps error, but the difference is mine is not running to the home screen so I can't go to application manager!

Two suggestions:
1) Put your phone in recovery mode (i.e. where you can do factory resets from), transfer a different ROM image over to the device (I'd use adb to do that from recovery mode), flash it, clear data/cache/etc., reboot the phone, and hope it works.
2) Put the phone in download mode (Vol Down + Home + Power; just like entering recovery, but Vol Down instead of Vol Up), and use Odin to flash a rooted stock image as detailed here; put CWM / TWRP / whatever recovery you want to use on the phone again, and get back to flashing ROM images from there.
In the future, try to be careful of what ROMs you flash... not everything works very well, as you've just discovered.

Thank you for responding so quickly! I am attempting the first method, however i am not sure how to transfer a different rom image(im assuming the adb stands for Android Debug Bridge). I was using the internal SD, but I can plug it the phone into my computer, and it says no drivers found for this device, where before it recognized the phone. Once I get that I can clear the other data and restart.
Your help is very appreciated!
smelenchuk said:
Two suggestions:
1) Put your phone in recovery mode (i.e. where you can do factory resets from), transfer a different ROM image over to the device (I'd use adb to do that from recovery mode), flash it, clear data/cache/etc., reboot the phone, and hope it works.
2) Put the phone in download mode (Vol Down + Home + Power; just like entering recovery, but Vol Down instead of Vol Up), and use Odin to flash a rooted stock image as detailed here; put CWM / TWRP / whatever recovery you want to use on the phone again, and get back to flashing ROM images from there.
In the future, try to be careful of what ROMs you flash... not everything works very well, as you've just discovered.
Click to expand...
Click to collapse

Gapps loop
How can I post a doubt in XDA forum?

What custom recovery is on your phone? I suggest installing Philz Touch via Odin if possible and then flash a new rom from an external SD card.

phone bricked? stuck at "this build is for.." screen

hi guys,
today i made a huge mistake. i was trying to deinstall the cm9 by just wiping my phone. accidentaly i made a "system wipe" with my recovery. now my phone ist stuck in the "this build is for development purposes only" screen. i tried to reboot into recovery via the aio kit - error: device not found. (led not flashing, not even when i connect it to the "normal" loading adapter). i just read another thread which ended in sending the device back to htc. i wonder if there is any possibility to safe my phone from that.
greetz bow111

Are you able to acces the Bootloader by closing the phone and restart it by keeping pressed at same time VOLUME DOWN + POWER ?
Be careful: Do NOT press volume UP!, Do not hold Volume Down for too long!
Once you are in the bootloader you should be able to:
A:Go into recovery and repair it from there in you have the ROM on your SD card.
B:If you are unable to acces recovery mode from bootloader, try to use the All In One Tool and flash the TWRP Recovery (the one in the right part of the window) also, note that there are too version, CDMA and GSM, if you have a sim card flash GSM, if you do not have a simcard use CDMA.
Let me know how it went

rzarectha said:
Are you able to acces the Bootloader by closing the phone and restart it by keeping pressed at same time VOLUME DOWN + POWER ?
Be careful: Do NOT press volume UP!, Do not hold Volume Down for too long!
Once you are in the bootloader you should be able to:
A:Go into recovery and repair it from there in you have the ROM on your SD card.
B:If you are unable to acces recovery mode from bootloader, try to use the All In One Tool and flash the TWRP Recovery (the one in the right part of the window) also, note that there are too version, CDMA and GSM, if you have a sim card flash GSM, if you do not have a simcard use CDMA.
Let me know how it went
Click to expand...
Click to collapse
ok. my phone just quick restarted. it directly went back to the "htc quietly brilliant" screen. pressing volume down + power button for a few seconds doesnt work to get into bootloader. i tried it serveral times. im not even able to turn the phone off. holding the power button only wont help at all.
thanks for ur help.
edit: i feel.. pranked now it worked and i went from bootloader to recovery (twrp already installed). can u tell me what to do now? thanks a lot already

Hm,
Well since you cant remove the battery on this phone, id suggest to just let it finish with what it has left off of the battery. once it is closed try to recharge it and then try to boot in recovery, ofc you might not be able to do this today, depends how much battery you had left when the problem started, but it's a chance, also if it's rooted you bootloader will be unlocked so i doubt HTC will grant you warranty for it (not 100% about this though). let us know if you manage to do any progress with it after you manage to make it close.
cheers

rzarectha said:
Hm,
Well since you cant remove the battery on this phone, id suggest to just let it finish with what it has left off of the battery. once it is closed try to recharge it and then try to boot in recovery, ofc you might not be able to do this today, depends how much battery you had left when the problem started, but it's a chance, also if it's rooted you bootloader will be unlocked so i doubt HTC will grant you warranty for it (not 100% about this though). let us know if you manage to do any progress with it after you manage to make it close.
cheers
Click to expand...
Click to collapse
i just edited my post. managed to get into recovery (twrp). what do i have to do now?

Download a new rom and transfer it to your sd card, then flash it from your recovery.

If u have the ROM in the SD card just flash it and reboot other wise as he mentioned above
Sent from my One V using xda premium

Ok, last night i went to sleep.
You now need to find a way to put a ROM on your SD card. whatever ROM you choose make sure you have the correct kernel for it (in every post for ROMs you will find a download link to the correct kernel aswell).
So what you do now (after you have the ROM .zip file on your SD card and your Kernel file in your PC) is:
-Put your phone into Bootloader, Select fast boot and connect the USB cable, and make sure it tells on your phone "FASTBOOT USB"
-Then in All in One select "Flash Kernel" and browse to the correct Kernel, and flash it.
-Reboot your phone in Recovery mode, you have the option in the fastboot screen.
-In the Recovery menu select Factory Reset -> Wipe System.
-While still in recovery go to "Install update from SD card" (or something similar) and choose the ROM .zip file, wait for it to be flashed
-reboot your phone (1st boot is always a bit slower, could take up to 5 minutes).
-after you get to your main screen, reboot the phone again and flash a Google Apps (gapps) .zip file. You will find the correct version from your ROM in the official thread of the ROM. You DO NOT run a factory reset, wipe system or anything like that for flashing Gapps.
Good luck.

got my phone working again. additionally i tried to "re-stock" my phone via a ruu.exe. now i have a new problem ( -.- ;D). my phone wont connect to wlan. it always hangs on "authenticating with wifi (dont know if translated it the right way)". some has an idea how to solve that problem?
p.s. sry for answering this late. had to do a lot of stuff for my finals :/
edit: was a problem with my router

flash a proper kernel
Sent from my One V

Issue with reinstall CyanogenMod 12 Latest Release Galaxy Note 2 - Reboot loop TWRP

Good Day,
Thanks for taking the time to read my posting.
I am running a Galaxy Note 2 with TWRP v2.8.7.0. Previously, had been running CyanogenMod 12 Latest Release from 2015-11-17.
Had an issue with the phone rebooting, went into TWRP to clear Cache/Davlik Cache, seen an error after this with /Data partition not being mounted(phone was encrypted). Proceeded to go into TWRP and Format Data then reinstall the ZIP listed above from an external SD card, successfully completed installation of ZIP file for CyanogenMod 12. When I reboot the device from TWRP, through Reboot->System, keeps rebooting back into TWRP and not into CyanogenMod.
I have connected the device to a Windows computer, confirmed that I can see it connected through USB. When I issue abd devices, I see the ##### recovery listed for the device, but if I issue fastboot devices, no device is listed.
Any recommendations for what could be done to reinstall the CyanogenMod build on my device so that it can boot properly would be greatly appreciated.
Thanks to everyone on the community for the support, education and feedback over the years and for all the hard work that you do, cheers to you.

Maybe flash back to a completely stock rom, confirm that everything works, flash twrp, and cm again?

I was thinking about recovery to stock recovery when I read your post .
Tried the stock recovery using Odin3-v3.07 pointing to CF-Auto-Root-t0ltetmo-t0ltetmo-sght889.tar.md5(1/20/2015), this appeared to complete from Odin, but the phone still went into a reboot loop into CyanogenMod, but never fully started up, thereafter.
Went to the autoroot.chainfire.eu site, downloaded the latest stock recovery for device.
Pulled the battery, back into TWRP, select Wipe/Factory reset from TWRP. Installed Samsung Kies onto desktop, ran Odin3-v3.10.6 pointing AP to CF-Auto-Root-t0ltetmo-t0ltetmo-sght889.tar.md5 dated from 3/31/2016. Then went to phone and go to download mode (turn off first, press and hold following buttons: vol down + home + power). Then Press Up Volume key to get into Download mode, then connect it to PC via USB. Device shown in Odin under ID:COM. On Option uncheck “Repartition”. After reboot, phone boot into IMG for CyanogenMod. Confirmed access to phone thereafter.
Thanks for the feedback, hope this helps someone down the line, if they run into the same issue.

Accidentally formatted system partition. Now stuck at bootlogo

While trying to flash a ROM , I formatted the system partition through TWRP and accidentally rebooted the phone. I was running MIUI 7 in the phone previously. I have TWRP backup of system and boot but the phone is stuck at bootlogo and power button volume down combo fires factory mode. I guess I deleted both the recovery and the OS. Phone is getting charged , as the battery indicator is displayed when plugged. Is there anyway to recover my A1?
Sorry if the question is a repeat. Any help would be appreciated.

FridayEagle said:
While trying to flash a ROM , I formatted the system partition through TWRP and accidentally rebooted the phone. I was running MIUI 7 in the phone previously. I have TWRP backup of system and boot but the phone is stuck at bootlogo and power button volume down combo fires factory mode. I guess I deleted both the recovery and the OS. Phone is getting charged , as the battery indicator is displayed when plugged. Is there anyway to recover my A1?
Sorry if the question is a repeat. Any help would be appreciated.
Click to expand...
Click to collapse
yo man,
first of all for getting into recovery mode is ; power off your device > wait few seconds > then press power + volume up button, there you go.
then, if youve wiped your device's system partitions via twrp , nothin to worry, just download any rom, put it to your sd card, reboot recovery, wipe everything except sd card, choose downloaded zip to flash, swipe to confirm, once the flashing rom completes reboot your device. :good: