I have the G2 Sprint variant. I rooted with Stumo and decided it isnt worth it. I have a ZVC TOT AND DLL as well as LG Flash tool. COM is set to 41 on PC but nothing happens after I click start and unplug, plug back in. Can someone tell me what is wrong? This method has always worked for me.
Related
In order for my D852 to work with wind i was told to use LG Flash Tool and download the a D852 dll and use a D852G tot file.
My phone says it's from telus.
when i first started to flash my phone using those 2 file, i thought it would have been easier but instead i got into a Factory Reset 2
I tried to redo the flash but now im unable to do so. I can still get into download mode, and when i turn on the phone is automatically goes into Firmware update without having to hold the volume up button.
Here is the thread
http://forums.redflagdeals.com/can-lg-g3-d852-work-wind-mobilicity-1720993/2/#post23713657
carlos1984
My phone now read's as a D852G on the buttom of flashing firmware update and now i tried every possible method of making it work..
http://imgur.com/a/9GAel
Try using the LG PC suite from the LG website to restore it...Once you get it back, root it and flash a custom rom like Fulmics if you want stock.
My phone on Fulmics 2.7 works on Wind.
So today I wanted to update my LG G3 (D855) 16 Gb model to 6.0 with the flash tool, bcs my phone was very buggy with the lollipop update. I did everything like it was said on a tutorial and downloaded the .kdz file. After starting to flash it I got a problem, maybe a big one even. The flash tool can't connect to my phone anymore and the process is stuck on 19% on the update firmware screen. I haven't unplugged it yes and I am kinda scared to do it. What should I do? I have red that I should maybe change the USB port from 3.0 to 2.0 but I don't know if I should unplug my phone just like that or turn it of for now?
Please help me!
Hi everyone,
It's been some time since I last came here.
I am facing a problem in my LG G3 and was wondering if anyone here can help me.
My phone is D855 was on V21A, Global ROM, rooted. I was thinking about updating to 6.0, so I used Autorec to flash TWRP to backup everything before the update. After Autorec I used terminal emulator (as I always do) to reboot into recovery. And then, the phone kinda died. The screen is always black, no LED blink nothing.
When I connect the phone to the PC it gets recognized as AndroidNet USB port.
I look through the forums for solution and came across this:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
I opened up the phone and did the short-wire and my phone got recognized as Qualcom 9008. I used the tool named: BoardDiag and it could copy stuff to my phone.
However, the issue that I faced was that I could not locate the TOT file of V21A. I tried the TOT of V10E and it did not work.
I tried following the method of LGExtract tool to turn the KDZ file to TOT but that did not work either. What happened is that the tool turn the KDZ to CAB and then when I try to extract the CAB it says that it is corrupted. Tried another KDZ from another source and the same result.
What I need now is one of two things:
Either the TOT file of Global V21a
or a working method for KDZ to TOT conversion.
Thanks for any suggestions.
[UPDATE]
I tried renaming the KDZ to TOT but it could not be extracted to the right MBN files.
I am facing the same problem with my LG G3 D850. I flashed a D851 Variant version of the rom and after fixing the hard brick part i am stuck flashing the .tot file because its considering my phone as D851 model. I tried to flash the LGUP_8974.dll to try to fix it and nothing.
Dr.Alani said:
Hi everyone,
It's been some time since I last came here.
I am facing a problem in my LG G3 and was wondering if anyone here can help me.
My phone is D855 was on V21A, Global ROM, rooted. I was thinking about updating to 6.0, so I used Autorec to flash TWRP to backup everything before the update. After Autorec I used terminal emulator (as I always do) to reboot into recovery. And then, the phone kinda died. The screen is always black, no LED blink nothing.
When I connect the phone to the PC it gets recognized as AndroidNet USB port.
I look through the forums for solution and came across this:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
I opened up the phone and did the short-wire and my phone got recognized as Qualcom 9008. I used the tool named: BoardDiag and it could copy stuff to my phone.
However, the issue that I faced was that I could not locate the TOT file of V21A. I tried the TOT of V10E and it did not work.
I tried following the method of LGExtract tool to turn the KDZ file to TOT but that did not work either. What happened is that the tool turn the KDZ to CAB and then when I try to extract the CAB it says that it is corrupted. Tried another KDZ from another source and the same result.
What I need now is one of two things:
Either the TOT file of Global V21a
or a working method for KDZ to TOT conversion.
Thanks for any suggestions.
[UPDATE]
I tried renaming the KDZ to TOT but it could not be extracted to the right MBN files.
Click to expand...
Click to collapse
Same problem here.
did you find a solution????
Please HELP
.....
I used the same short-wire method and flashed the only TOT I could find, which was 10E. However, this time I flashed the system partition as well. In the guide it says it would take a long time so don't do it. I did it anyway. It took reeeeeeeeeaaaaalllllly long time. Over 4 hours.
After finishing flashing I place back the battery as indicated in the guide and the phone restarted and was stuck at LG screen. I connected it to the computer and it was finally recognized as an LG Android phone.
Then I used the official LG update tool. It detected the phone and said there was an update. I proceeded with the update and everything went back to normal. I even had the same data and apps because I did not overwrite the data partition.
I hope this helps.
Sent from my LG-D855 using XDA-Developers mobile app
Dr.Alani said:
I used the same short-wire method and flashed the only TOT I could find, which was 10E. However, this time I flashed the system partition as well. In the guide it says it would take a long time so don't do it. I did it anyway. It took reeeeeeeeeaaaaalllllly long time. Over 4 hours.
After finishing flashing I place back the battery as indicated in the guide and the phone restarted and was stuck at LG screen. I connected it to the computer and it was finally recognized as an LG Android phone.
Then I used the official LG update tool. It detected the phone and said there was an update. I proceeded with the update and everything went back to normal. I even had the same data and apps because I did not overwrite the data partition.
I hope this helps.
Sent from my LG-D855 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you,
This is very helpful for me and all V21A owners.
Thaaaaaaaaaaanks.
LoRd4LoL said:
Thank you,
This is very helpful for me and all V21A owners.
Thaaaaaaaaaaanks.
Click to expand...
Click to collapse
I also short wired. Now I am looking for a TOT file. I had stock lollipop for lg g3 canadian version (d852) but i cannot find the tot file for lollipop. I have tot files for marshmallow and kitkat. Will that work?
I am downloading a lollipop 20g kdz file. Not sure if it will work. Plz help. Thanks.
Like a lot of people I have the eu version of the h815 and managed to bootloop it after following the garbage methods online for rooting .. I came here for help and found all the methods listed... lg up, lg flashtool 2014 etc.. the problem was that my phone just wasn't recognized by the computer, it charged well but that was it, lg bridge, lg up, lg flashtool.. none could find my phone.. I thought I was doomed to a soft bricked paperweight and even began contemplating the hundreds of pounds needed to purchase a new phone.. however after hours and hours of tinkering I cracked it and now have a working lg g4 again.
first off download and install lg up dll file
then install lg up but don't open yet
find and make sure u download the correct kdz firmware file ( I needed the h81520d file which I downloaded from storage cow as devtesters didn't work for me)
now head to your computer control panel and delete(uninstall) any lg mobile drivers that you see.
connect your phone through usb into download mode and leave connected
once that's done download the old drivers (4.0.4 I believe) and not the newest 4.1.1 or whatever it is now.
then open lg up and hopefully like me you see your recognized phone.
click upgrade (not refurbish) and click bin.. right of bin is the ... symbol.
hit that, choose your kdz file and voila.. let it work its magic..
DAMN IM HAPPY. HOPE THIS CAN HELP SOME OF YOU LIKE IT DID ME.
Hi, recently decided to reset my phone back to stock as I had some trouble with a few programs after resetting my phone. I tried factory reset but the programs didn't work so I decided I would try to just restore to stock and start fresh. I followed a guide on how to do the stock restore using LGUP/LG Flash Tool. I followed the guide and put the KDZ File into the program and pressed cse flash. The program worked till around 12% then it got stuck and just didn't work anymore. It said error so I kept trying over and over as some guides on this problem said to keep trying.
Nothing has happened and my phone is now stuck on firmware update screen. I have taken the battery out multiple times and replaced it back in and turned the phone on but it automatically goes to that screen after showing the lg logo. I have tried the volume down and power button factory reset but that doesn't work and tried getting onto download screen if that was any help but couldn't do that either. Now I'm stuck here... Any help? Don't have any other phone and can't afford to get a new one so I would like to try fix this anyway possible.
After failing the flash update thing the program says failed my phone says 0%. It went to 1% once and then just went back to 0% after it didn't work. So don't know if it's been changed in anyway. All help appreciated.
Did you have LG up set at refurbish or upgrade.....
stinka318 said:
Did you have LG up set at refurbish or upgrade.....
Click to expand...
Click to collapse
I did refurbish first as I wanted to start new and it didn't work even though I did it a few times. I tried upgrade after and still nothing. Also have tried Uppercut and that does the same as normal LGUP.
The furthest % it got to was 19 on the computer and 8 on the phone and then it just stopped again. It usually stays between 11-19%. But most of the time 11%-16%
Have you made sure that it is the right region......
Try to down load just tot file and try that....
stinka318 said:
Have you made sure that it is the right region......
Try to down load just tot file and try that....
Click to expand...
Click to collapse
Where would the TOT files be? Can't seem to find any for LG H815 v20i ?
And what program should I use to do it?
Janny1993 said:
Where would the TOT files be? Can't seem to find any for LG H815 v20i ?
And what program should I use to do it?
Click to expand...
Click to collapse
This may help...........
http://storagecow.eu/index.php?dir=Xda/LG+G4/
If that don't work try this..........
https://forum.xda-developers.com/g4/orig-development/bl-lock-ul-android-6-0-marshmallow-t3459260