Please help me fix LG G3 D852! - G3 Q&A, Help & Troubleshooting

In order for my D852 to work with wind i was told to use LG Flash Tool and download the a D852 dll and use a D852G tot file.
My phone says it's from telus.
when i first started to flash my phone using those 2 file, i thought it would have been easier but instead i got into a Factory Reset 2
I tried to redo the flash but now im unable to do so. I can still get into download mode, and when i turn on the phone is automatically goes into Firmware update without having to hold the volume up button.
Here is the thread
http://forums.redflagdeals.com/can-lg-g3-d852-work-wind-mobilicity-1720993/2/#post23713657
carlos1984
My phone now read's as a D852G on the buttom of flashing firmware update and now i tried every possible method of making it work..
http://imgur.com/a/9GAel

Try using the LG PC suite from the LG website to restore it...Once you get it back, root it and flash a custom rom like Fulmics if you want stock.
My phone on Fulmics 2.7 works on Wind.

Related

Phone won't start after CSE flashing a KDZ. Won't go nowhere other than Download Mode

Phone is LG G Pro F240L. I had the latest update (Lollipop) installed and let's just say I wasn't satisfied with it.
I flashed Kitkat KDZ like normally but it got stuck on bootloop, then I CSE flashed using the Kitkat KDZ and now it won't do anything other than go to download mode.
I would really appreciate any help to get my phone back to normal and fast. Thanks!
EDIT: I should also add that I've tried the PC suite recovery method but it says my phone's battery is too low when it's not.
UPDATE: I think I've hard bricked my phone. Damn...
tress19991 said:
Phone is LG G Pro F240L. I had the latest update (Lollipop) installed and let's just say I wasn't satisfied with it.
I flashed Kitkat KDZ like normally but it got stuck on bootloop, then I CSE flashed using the Kitkat KDZ and now it won't do anything other than go to download mode.
I would really appreciate any help to get my phone back to normal and fast. Thanks!
EDIT: I should also add that I've tried the PC suite recovery method but it says my phone's battery is too low when it's not.
UPDATE: I think I've hard bricked my phone. Damn...
Click to expand...
Click to collapse
Reflash the kdz again.before that check whether you are flashing the correct firmware of the correct model.
Now flash your kdz through lg offline flash tool.you can get that by searching in this xda forums.so even if your battery is below 60% it continues to the next step.But it is recommended to have minimum 60% of battery level.after opening lg offline flash tool you choose the kdz,then after choose cse flash.thats it.because it worked for me.or if your phone goes intlo reccovery mode,simply you can factory reset the data,perform 3 wipes(factory reset,cache and dalvik cache) and reboot.It may work sometimes.update me after u did these steps.if worked hit thanks. (i want to help you.thats why,i said what i know.)
brick my lg g pro f240....
krishna13 said:
Reflash the kdz again.before that check whether you are flashing the correct firmware of the correct model.
Now flash your kdz through lg offline flash tool.you can get that by searching in this xda forums.so even if your battery is below 60% it continues to the next step.But it is recommended to have minimum 60% of battery level.after opening lg offline flash tool you choose the kdz,then after choose cse flash.thats it.because it worked for me.or if your phone goes intlo reccovery mode,simply you can factory reset the data,perform 3 wipes(factory reset,cache and dalvik cache) and reboot.It may work sometimes.update me after u did these steps.if worked hit thanks. (i want to help you.thats why,i said what i know.)
Click to expand...
Click to collapse
mine lg g pro f240 got dead no light won't switch on after using lg flash tool 2014. after root with kit kat I'm upgrade again to lollipop after verifying 100% it stuck in download mode and do nothing...then died......
damm I'm brick my phone..plzz help

no download mode.. help!

i have h815 5.1.1 with locked bootloader. when i heard theres a MM 20b available, i tried to update my phone, losing my root access.. i just played around for a while and was not so happy yet, that i decided to downgrade back to my old FW. (10e). i flashed back my kdz using LGUP using refurbished method. and now the problem starts to come in.. after flashing back, i rooted it again, then it starts to have bootloops.tried to look for another open kdz to flshed but didnt worked out.. when i tried to flash back again 20b, i cannot enter download mode anymore, still getting in recovery though, i tried to clear data. but still not booting up. LGUP is not seeing my phone and also flashtool 2014. please help..
Sent from my SM-N9005 using Tapatalk

LG G3 D855 Stuck in MiniOS boot animation after trying to flash stock firmware w/ kdz

Hello. My LG G3 D855 originally ran CyanogenMod13 Nightly, and for some reason 6.0 Marshmallow GApps did not work. So I attempted to flash back to stock using LG Flash Tool. However after the flashing (successful), my phone would only boot into Download Mode, even after hard factory reset. Nothing worked, ADB, fastboot, nothing. So I then downloaded the older version of Flash Tool (2014), and the G3 D855 6.0 marshmallow KDZ. I believe this was successful, as now the phone changed from download mode to the MiniOS boot animation. However that is all it did, just displayed the animation. I attempted a hard factory reset (and the design of the screen had changed, which is why I assumed the KDZ flashing worked). That didn't help, and so I booted back into Download Mode, and tried flashing the TOT file for my device using the newer Flash Tool. However the new Flash Tool didn't even recognize my device, and so I, in one last hopeful effort, downloaded LG PC Suite to try and fix my phone, but in Download Mode or otherwise, my phone wasn't detected. I've tried flashing other versions of the KDZ on my phone, all unsuccessful. And of course there is no recovery I can access. Please any help would be extremely appreciated.

Autorec Bricked my phone, need help

Hi everyone,
It's been some time since I last came here.
I am facing a problem in my LG G3 and was wondering if anyone here can help me.
My phone is D855 was on V21A, Global ROM, rooted. I was thinking about updating to 6.0, so I used Autorec to flash TWRP to backup everything before the update. After Autorec I used terminal emulator (as I always do) to reboot into recovery. And then, the phone kinda died. The screen is always black, no LED blink nothing.
When I connect the phone to the PC it gets recognized as AndroidNet USB port.
I look through the forums for solution and came across this:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
I opened up the phone and did the short-wire and my phone got recognized as Qualcom 9008. I used the tool named: BoardDiag and it could copy stuff to my phone.
However, the issue that I faced was that I could not locate the TOT file of V21A. I tried the TOT of V10E and it did not work.
I tried following the method of LGExtract tool to turn the KDZ file to TOT but that did not work either. What happened is that the tool turn the KDZ to CAB and then when I try to extract the CAB it says that it is corrupted. Tried another KDZ from another source and the same result.
What I need now is one of two things:
Either the TOT file of Global V21a
or a working method for KDZ to TOT conversion.
Thanks for any suggestions.
[UPDATE]
I tried renaming the KDZ to TOT but it could not be extracted to the right MBN files.
I am facing the same problem with my LG G3 D850. I flashed a D851 Variant version of the rom and after fixing the hard brick part i am stuck flashing the .tot file because its considering my phone as D851 model. I tried to flash the LGUP_8974.dll to try to fix it and nothing.
Dr.Alani said:
Hi everyone,
It's been some time since I last came here.
I am facing a problem in my LG G3 and was wondering if anyone here can help me.
My phone is D855 was on V21A, Global ROM, rooted. I was thinking about updating to 6.0, so I used Autorec to flash TWRP to backup everything before the update. After Autorec I used terminal emulator (as I always do) to reboot into recovery. And then, the phone kinda died. The screen is always black, no LED blink nothing.
When I connect the phone to the PC it gets recognized as AndroidNet USB port.
I look through the forums for solution and came across this:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
I opened up the phone and did the short-wire and my phone got recognized as Qualcom 9008. I used the tool named: BoardDiag and it could copy stuff to my phone.
However, the issue that I faced was that I could not locate the TOT file of V21A. I tried the TOT of V10E and it did not work.
I tried following the method of LGExtract tool to turn the KDZ file to TOT but that did not work either. What happened is that the tool turn the KDZ to CAB and then when I try to extract the CAB it says that it is corrupted. Tried another KDZ from another source and the same result.
What I need now is one of two things:
Either the TOT file of Global V21a
or a working method for KDZ to TOT conversion.
Thanks for any suggestions.
[UPDATE]
I tried renaming the KDZ to TOT but it could not be extracted to the right MBN files.
Click to expand...
Click to collapse
Same problem here.
did you find a solution????
Please HELP
.....
I used the same short-wire method and flashed the only TOT I could find, which was 10E. However, this time I flashed the system partition as well. In the guide it says it would take a long time so don't do it. I did it anyway. It took reeeeeeeeeaaaaalllllly long time. Over 4 hours.
After finishing flashing I place back the battery as indicated in the guide and the phone restarted and was stuck at LG screen. I connected it to the computer and it was finally recognized as an LG Android phone.
Then I used the official LG update tool. It detected the phone and said there was an update. I proceeded with the update and everything went back to normal. I even had the same data and apps because I did not overwrite the data partition.
I hope this helps.
Sent from my LG-D855 using XDA-Developers mobile app
Dr.Alani said:
I used the same short-wire method and flashed the only TOT I could find, which was 10E. However, this time I flashed the system partition as well. In the guide it says it would take a long time so don't do it. I did it anyway. It took reeeeeeeeeaaaaalllllly long time. Over 4 hours.
After finishing flashing I place back the battery as indicated in the guide and the phone restarted and was stuck at LG screen. I connected it to the computer and it was finally recognized as an LG Android phone.
Then I used the official LG update tool. It detected the phone and said there was an update. I proceeded with the update and everything went back to normal. I even had the same data and apps because I did not overwrite the data partition.
I hope this helps.
Sent from my LG-D855 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you,
This is very helpful for me and all V21A owners.
Thaaaaaaaaaaanks.
LoRd4LoL said:
Thank you,
This is very helpful for me and all V21A owners.
Thaaaaaaaaaaanks.
Click to expand...
Click to collapse
I also short wired. Now I am looking for a TOT file. I had stock lollipop for lg g3 canadian version (d852) but i cannot find the tot file for lollipop. I have tot files for marshmallow and kitkat. Will that work?
I am downloading a lollipop 20g kdz file. Not sure if it will work. Plz help. Thanks.

[Bricked] LG G3 Rogers D852

I really need help. I've searched around all over the web and on here with no solution. What happened was I tried to downgrade my G3 to stock 4.4.2 KitKat from 5.0.1 Lollipop. The flash tool went all the way to 89% and failed. I took out the battery and now my phone just boot to the Android recovery after the LG logo. When I try to use Flashtool to flash it again, my IMEI and S/N show as null and flash tool fails at 6%. I can't find a solution. I'm able to go into download mode and recovery which the recovery mode only has wipe data to factory.
I'm running Windows 7-64bit. I've tried different Windows version and 32 bit version and none works. I've sent it to a store and they thought they could fix it because they say it is software issues. They couldn't fix it.
I try downloading different Roms variant and .KDZ and .ToT files but nothing works. I've tried both upgrade dl and board dl in Flashtool but nothing works. I've used the D852 DLL, the generic DlL and even the DLL extracted from the .KDZ file.
Please somone help me. There are people with the same issues and either they got it fix or their thread end unsolved. What can I do.
Bump
Bump
Use a otg cable and flash with a usb a custom Rom (fulmics or CM)
Using TWRmp recovery

Categories

Resources