What is nowadays reccommended hardware to scan nfc tags?
A Phone
A Tablet
A usb key ?
Thanks for the help,
very appreciated
securityinfos said:
What is nowadays reccommended hardware to scan nfc tags?
A Phone
A Tablet
A usb key ?
Thanks for the help,
very appreciated
Click to expand...
Click to collapse
phone and tablet. But unuseless i think.
securityinfos said:
What is nowadays reccommended hardware to scan nfc tags?
A Phone
A Tablet
A usb key ?
Thanks for the help,
very appreciated
Click to expand...
Click to collapse
i use phone because i always have it, tablet when the thing wont scan (tablet reads better for some reason?)
>S4 i9505
>Xperia Tab Z
Related
Well, I got some issues with a Xperia Arc which I bought a while ago and have been working fine until now.
The issue is that the device doesn't turn on most of the time, it's just completely dead(no vibration, led, logo, fastboot or anything). But sometimes it does turn on, and everything works. But when I do turn off my device it just dies completely and I have to spend hours trying to fix it.
Anyone know how to solve this? I have tried with other Arc batteries and such, but the problem still occurs.
The phone has a unlocked bootloader (testpoint method).
Sent from my Nexus 7 using Tapatalk 2
I guess it could be hardware problem Sir. Maybe some lose connection. Did you BY CHANCE dropped it any time? Just asking sir
Cheers,
AJ
Abhinav2 said:
I guess it could be hardware problem Sir. Maybe some lose connection. Did you BY CHANCE dropped it any time? Just asking sir
Cheers,
AJ
Click to expand...
Click to collapse
It's not any loose connections, as I have opened it and checked them, and the issue seems to be with the bootloader as it boots fine at times, and as long as I dont turn it off it works fine.
devstaff said:
It's not any loose connections, as I have opened it and checked them, and the issue seems to be with the bootloader as it boots fine at times, and as long as I dont turn it off it works fine.
Click to expand...
Click to collapse
So if I may suggest, Sir try relocking bootloader and then unlocking officially(if DRM keys dont matter much)
Cheers,
AJ
Abhinav2 said:
So if I may suggest, Sir try relocking bootloader and then unlocking officially(if DRM keys dont matter much)
Cheers,
AJ
Click to expand...
Click to collapse
Well, the issue is still there, and the phone isn't operating properly. My phone doesn't even boot up with a microsd card inserted.
When does the phone turn on? Does it happen in certain conditions or randomly?
Are you able to use flashmode (turn off, hold down Back button, connect USB cable) or enter into fastboot (turn off, hold down Menu button, connect USB cable)?
Did you do anything specific prior to this issue?
Someguyfromhell said:
When does the phone turn on? Does it happen in certain conditions or randomly?
Are you able to use flashmode (turn off, hold down Back button, connect USB cable) or enter into fastboot (turn off, hold down Menu button, connect USB cable)?
Did you do anything specific prior to this issue?
Click to expand...
Click to collapse
The device doesn't boot into fastboot, flashmode.
I just had the phone in my pocket, when I picked it up it was dead.
I have ordered a new mainboard, anyone want a tutorial on how to swap the main board / screen on this device?
Sent from my Nexus 7 using Tapatalk 2
You could also check this - http://forum.xda-developers.com/showthread.php?t=1322827
Or if you wish to change mainboard, this is the disassembly guide - http://forum.xda-developers.com/showthread.php?t=1086178
Someguyfromhell said:
You could also check this - http://forum.xda-developers.com/showthread.php?t=1322827
Or if you wish to change mainboard, this is the disassembly guide - http://forum.xda-developers.com/showthread.php?t=1086178
Click to expand...
Click to collapse
Have changed mainboard on Arc before, might write up a small tut on how to do it.
Sent from my Xperia U using Tapatalk 2
The phone is fixed now, and it works like a charm!
Was really easy to fix it at home, and didn't cost me more than 20 euro totally.
Sent from my Xperia Arc S using Tapatalk
Been searching for hours on this issue. It's easy to make the Nexus 7 boot on power with a simple fastboot command. Does anyone know anyway to make this happen with this tablet? I am planning on using it as a gauge cluster in my car and would prefer not to have to go back to my nexus 7. The screen size is amazing. If there was anyone with any ideas, that would be helpful. I have tried searching for where the plug in screen was held, but I haven't found anything yet. I was thinking about just replacing loading that screen, with rebooting the device. Maybe something like that would work.
Let me know if you guys have any ideas please! Getting kind of desperate here. Thanks!
112 views and no suggestions! Ha, anyone have any ideas?
deadaim00 said:
112 views and no suggestions! Ha, anyone have any ideas?
Click to expand...
Click to collapse
So, what you want is for your tablet to come on when the car is started, and off when off?
sleekmason said:
So, what you want is for your tablet to come on when the car is started, and off when off?
Click to expand...
Click to collapse
Yep! I've already got the off part taken care of, just need the on!
deadaim00 said:
Yep! I've already got the off part taken care of, just need the on!
Click to expand...
Click to collapse
Only thing I can think of is to allow your tablet to stay in suspend, even force it with power off,
then use tasker to create a script to wake from suspend when plugged in!
sleekmason said:
Only thing I can think of is to allow your tablet to stay in suspend, even force it with power off,
then use tasker to create a script to wake from suspend when plugged in!
Click to expand...
Click to collapse
That's how I currently have it setup. The problem is if it were to ever run out of battery and shut off, I'd have to take my "cluster" out to be able to turn it back on when it's plugged in and charged.
deadaim00 said:
That's how I currently have it setup. The problem is if it were to ever run out of battery and shut off, I'd have to take my "cluster" out to be able to turn it back on when it's plugged in and charged.
Click to expand...
Click to collapse
Run a loop with a breaker in it for power and use a dedicated power source with a switch?
sleekmason said:
Run a loop with a breaker in it for power and use a dedicated power source with a switch?
Click to expand...
Click to collapse
As I do appreciate the ideas, I have already thought about all of these. However I would like it to operate exactly how I had my previous tablet, except with this specific piece of hardware. If it's not possible it's not possible, or I'll just keep looking. Thanks though!
Now that the source has been released and there is a recovery and such, anyone have any other ideas on this? It would really be helping me out! Thanks guys!
Hey guys,
I am using indian unlocked version of moto z play and i have a good quality OTG which works fine with pendrives and ext HDD but when i connect to my gamepad (havit hv-g69) it wont detect it. Mobile detects and works with Bluetooth gamepads but its having problem with otg+gamepad. And yes the gamepad is working on my pc as expected.
Can anybody tell me whats wrong and how to fix it.
My Xbox One controller gets detected though
uberano26 said:
My Xbox One controller gets detected though
Click to expand...
Click to collapse
Can i see any screen shots and pic's?
abhilash_s_j said:
Can i see any screen shots and pic's?
Click to expand...
Click to collapse
Yeah thats a bit difficult considering the phone does not show a list of devices attached nor do i have any games to show ingame.
The most i can do is show the controller attached being powered on from the phone.
uberano26 said:
Yeah thats a bit difficult considering the phone does not show a list of devices attached nor do i have any games to show ingame.
The most i can do is show the controller attached being powered on from the phone.
Click to expand...
Click to collapse
What do you mean by that, phone doesn't show that you have connected a input device?
No it does not
uberano26 said:
No it does not
Click to expand...
Click to collapse
Ok one last doubt,
Is it possible that my gamepad was detected in digital mode and since phone doesnt show anything i was been mistaken.
But in defense my game pad has a LED which glows when it is been switched to analogue mode from digital (default). And when i connected to phone and tried to play gangster 4 (yes, game supports gamepad) game it didnt work. What might be the problem?
You can try this
http://thetechtime.blogspot.in/2015/04/how-to-use-pc-gamepad-for-android.html
uberano26 said:
You can try this
http://thetechtime.blogspot.in/2015/04/how-to-use-pc-gamepad-for-android.html
Click to expand...
Click to collapse
I seen that web page before i got the gamepad. But i dont wanna root my phone since it makes my miss out on OTA. And i dont want to take flashing and hard work for gamepad work around. So i got struck with bad luck ha?
Seems so
My phone detects it though...
I have a Havit G-69 as well. On redmi 6A it works just by inserting. But on nokia 2.1 it doesn't. Only I can get a mixplorer notification (when its on) about it wanting access to "USB Joystick".
Doesn't it means it detects my gamepad?
bro same with me i have cosmic byte interstellar wired gamepad it does work in remi 4 but not in redmi 8 with otg or redmi 5 without otg it shows a unknown device connected its been 4 year do you get the solution now that helps me does rooting device harm something or it is safe ?
Hello!
After swimming with Sony Smartwatch 3 SWR50 touchscreen is dead.
I've disassembled it and I see that one of contact on touch flex cable is absent=(
I cannot find any replacement lcd on market and then I have a question to you: how i can operate it without touchscreen?
I know that I can use it by voice, but It have not full access to all function, like Settings for example.
Waiting for your advices.
Thank you!
Try keyboard with usb otg
murigny64 said:
Try keyboard with usb otg
Click to expand...
Click to collapse
Thanks! I've tried it, but otg is not working on my swr50 I think that will not work in all..
Any other ideas?
I want to turn on gestures by wrist..
Dead watch
hey friends, my fingerprint only works with the phone plugged into the computer usb ... does anyone know the reason?
kwelf said:
hey friends, my fingerprint only works with the phone plugged into the computer usb ... does anyone know the reason?
Click to expand...
Click to collapse
I don't know is it a hardware problem but I guess your fingerprint was learn while cable was plug.
You can try to re-learn fingerprint without cable.
you can make sensor more precision by double or tripple 'add fingerprint' with the same finger.
maijai said:
I don't know is it a hardware problem but I guess your fingerprint was learn while cable was plug.
You can try to re-learn fingerprint without cable.
you can make sensor more precision by double or tripple 'add fingerprint' with the same finger.
Click to expand...
Click to collapse
I believe that it is grounding with problem, a technician spoke it for me, but I am still without solutions
the fingerprint reader of my mi5s does not work either (it does not detect the fingerprint)
Did you get any solution?
hy guys, i have a case that similar with this guy.
first time i use this phone, i can make screen lock, i can use vpn (dronny),
but, after i use mi mover from my old phone, i just cannot make screen lock on my mi5s, could u help me please?