Hello!
After swimming with Sony Smartwatch 3 SWR50 touchscreen is dead.
I've disassembled it and I see that one of contact on touch flex cable is absent=(
I cannot find any replacement lcd on market and then I have a question to you: how i can operate it without touchscreen?
I know that I can use it by voice, but It have not full access to all function, like Settings for example.
Waiting for your advices.
Thank you!
Try keyboard with usb otg
murigny64 said:
Try keyboard with usb otg
Click to expand...
Click to collapse
Thanks! I've tried it, but otg is not working on my swr50 I think that will not work in all..
Any other ideas?
I want to turn on gestures by wrist..
Dead watch
Related
Hey all,
I fell on top of my A100 a few weeks ago (Don't ask me how) and the side had a nice hit.
I noticed the screen is checked, but the image is clean and perfect.
The touch is not working anymore except for on 1 location, on the top part, a few square cm,
My problem is that I don't have any insurance left (took off the void) soooo,,,yeah...
I want to use it as a media player, attached to my LCD with HDMI, using a mouse to controll it.
Thing is, no mouse gets detected on this rom.
I tried to downgrade to Gingerbread from ICS, so I reset user data and cache, downloaded the ROM, changed to update.zip, placed it into the SD card, volume up + power booted it, and I get this droid opened up with a red ! on it...
Everything I try doesn't react
The mouse is a very simple HID logitech BT mouse with USB, connected to microUSB in the A100, I tried the G9x logitech too, but no luck.
Can anyone help me here? I can't use the screen at all, I am desperate
Thanks!
PVTD
The USB port on the A100 does not have host mode, you can't use it for any USB devices, it is just a way to transfer data with a PC. If you can enable BT on theA100 you will get a mouse/keyboard working, I am just not sure how to do that with no touch response on the screen.
b1lk1 said:
The USB port on the A100 does not have host mode, you can't use it for any USB devices, it is just a way to transfer data with a PC. If you can enable BT on theA100 you will get a mouse/keyboard working, I am just not sure how to do that with no touch response on the screen.
Click to expand...
Click to collapse
But I have seen multiple questions abut making host mouses work with USB on the A100, I'll try find the topics back
I could connect it by BT if I keep sinning the tablet around to make the few square cm work on the screen, but it wont be possible to accept
I tried using a screening app on windows, but sadly can only see immage from the tablet, no input remotely.
PVTD said:
But I have seen multiple questions abut making host mouses work with USB on the A100, I'll try find the topics back
I could connect it by BT if I keep sinning the tablet around to make the few square cm work on the screen, but it wont be possible to accept
I tried using a screening app on windows, but sadly can only see immage from the tablet, no input remotely.
Click to expand...
Click to collapse
its not possible.
G2x-CM7 Nightly 11/25/12 Build, Trinity ELP Kernel
Hi guys, I'm looking here for help so I will try to describe the problem
So far, I've dismantled it 2 times not completely (didn't dismantle to part of tochscreen, digitizer etc.) and restored stock software twice, also tried rooting and installin CWM.
The problem is : 1.st thing- I't boots up and everything works, I lock it and unlock it without problems.
2.nd thing- If I try to unlock it with opening gamepad the screen stays black, even if I put game pad back.. But touch screen is usable because I can hear the sound and vibration feedback. The display becomes usable after some time of laying around.
3.rd thing- If I unlock it normally like in situation 1 and open gamepad and use phone for while, after I lock it (with opend/closed gamepad) the screen won't come on like in situation 2, but will become usable after some time of laying.
My main suspect is main flax cable.
Any kind of help is appreciated.
Anyone having any idea?
zmarkod said:
Anyone having any idea?
Click to expand...
Click to collapse
Yeah, my guess is slider flex cable, too...
Bakisha said:
Yeah, my guess is slider flex cable, too...
Click to expand...
Click to collapse
Thank you for your reply.
I would like to hear other opinions.
HI
Bit of a problem, my girlfriend broke my Note 2 screen...:crying:
I need to get photos and documents off my phone but cant open it as a drive on my pc because of the lockscreen pin.
Is there any way of deactivating without use of the screen.
Thanks
Have you tried a wireless mouse with an otg cable?
Thanks Mate
not sure how I could have used mouse either as the lcd was smashed and couldn't see numbers. Not to worry I put a new screen on it. All good now
hey friends, my fingerprint only works with the phone plugged into the computer usb ... does anyone know the reason?
kwelf said:
hey friends, my fingerprint only works with the phone plugged into the computer usb ... does anyone know the reason?
Click to expand...
Click to collapse
I don't know is it a hardware problem but I guess your fingerprint was learn while cable was plug.
You can try to re-learn fingerprint without cable.
you can make sensor more precision by double or tripple 'add fingerprint' with the same finger.
maijai said:
I don't know is it a hardware problem but I guess your fingerprint was learn while cable was plug.
You can try to re-learn fingerprint without cable.
you can make sensor more precision by double or tripple 'add fingerprint' with the same finger.
Click to expand...
Click to collapse
I believe that it is grounding with problem, a technician spoke it for me, but I am still without solutions
the fingerprint reader of my mi5s does not work either (it does not detect the fingerprint)
Did you get any solution?
hy guys, i have a case that similar with this guy.
first time i use this phone, i can make screen lock, i can use vpn (dronny),
but, after i use mi mover from my old phone, i just cannot make screen lock on my mi5s, could u help me please?
~~
Braxton343 said:
I'm working on a Sprint T217S Galaxy Tab 3 that I gifted to my grandmother a few years back. I had completely reset it beforehand, so developer options are disabled as far as I know. It has had battery issues lately, so I ordered a battery. It arrived today, and my grandma happened to stop by. She told me that she can't use the touch screen anymore, and after further inspection, the digitizer seems to be completely unresponsive.
Here's my dilemma: The entire digitizer is faulty (no menu/back button or touch input), and OTG support seems to not be working. I can connect via USB to the computer, and I believe it takes charge. I cannot however plug in a mouse/keyboard via OTG to navigate the tablet. My only option seems to be using voice input, but all it can do is open settings/handle very basic tasks.
Is there anything I can do? I've considered side-loading apps, but I can't tap anything to establish a connection via apps or settings in the slide down menu to enable bluetooth, etc. I'm at a loss, because I told her I could figure it out soon. I didn't realize how long this would take since I might be looking at a digitizer replacement, and shipping would take a while (weekend). Really appreciate any help, thank you!
Click to expand...
Click to collapse
I bought a tab4LTE for 120€ , so maybe...
~~
If your voice controls can get you in there, set up a Bluetooth mouse.