I got a new box today from Amazon Germany and I blocked the 2 domains before running the first set up.
amzdigitaldownloads.edgesuite.net
softwareupdates.amazon.com
Now its stuck after gathering network information right after language selection.
It tells me ‘the internet connection is interupted, check cabeling and router settings’.
What can I do now?
Leghorn said:
I got a new box today from Amazon Germany and I blocked the 2 domains before running the first set up.
amzdigitaldownloads.edgesuite.net
softwareupdates.amazon.com
Now its stuck after gathering network information right after language selection.
It tells me ‘the internet connection is interupted, check cabeling and router settings’.
What can I do now?
Click to expand...
Click to collapse
No need to block those domains right now, you can't root anyway. Allow them to get through the setup, then block them after if you want.
The setup is done. Unfortunately without rooting.
Anyhow I've tried to block further updates. But when I add one of the both amazon-url I got network issue message and all content from amazon prime is gone.
My current firmware version is 51.1.4.0_user_514006420 and I heard the next firmware update installs the following:
“Self destruct” eFuse added to kernel which gets triggered if an older bootloader is used. This means Fire TVs that update to stock 51.1.4.1_user_514013920 can never be downgraded, even if a method to root them is discovered.
Click to expand...
Click to collapse
Any idea how to prevent updates?
Leghorn said:
The setup is done. Unfortunately without rooting.
Anyhow I've tried to block further updates. But when I add one of the both amazon-url I got network issue message and all content from amazon prime is gone.
My current firmware version is 51.1.4.0_user_514006420 and I heard the next firmware update installs the following:
Any idea how to prevent updates?
Click to expand...
Click to collapse
My router is old so I had to use OpenDNS to block the sites listed in your first post. It seems to work because if I type in either of those websites in my browser I get a
"website blocked" message. At the moment I'm on 51.1.4.0_user_514006420 too.
I'm able to get Prime Video and no network issues.
I got the same network issue like Leghorn on the FW version 51.1.4.0_user_514006420. I also blocked the two domains in my router and have no more access to the prime content.
Leghorn, have you found a solution now? Or has anybody else an idea what i can do to get access to prime content?
Regards
Jogi173
If you are using a Fritz!Box try the following changes in your settings:
1.) In tab "Filter" -> "Listen" disable the setting "Teredo-Filter aktiv"
2.) In tab "Zugangsprofile" check your blacklist profile and enable " HTTPS-Abfragen erlauben"
Probably these setting changes may allow Prime Video again.
Calibaan said:
If you are using a Fritz!Box try the following changes in your settings:
1.) In tab "Filter" -> "Listen" disable the setting "Teredo-Filter aktiv"
2.) In tab "Zugangsprofile" check your blacklist profile and enable " HTTPS-Abfragen erlauben"
Probably these setting changes may allow Prime Video again.
Click to expand...
Click to collapse
Hi Calibaan,
yes i'm using a Fritz!Box. I will try it when i'm at home.
Thank you for your advice I will report if it works.
Jogi173
Hey Calibaan,
I enabled the option "HTTPS-Abfragen erlauben" and now it works.
Thank you very much!
Jogi173
While sideloading Kodi with my Fire TV stick there was a prompt that wanted me to update my Fire Stick. I'm still kind of new to this, only been use this firestick for 3 days now. It was going to update in one minute if I didn't select "remind me later". Figuring out why the updates aren't blocked is an issue that I will have to deal with later because I thought I blocked the three URLs. What I want to know is if an update already downloaded in the back ground and wants to install is the reason I'm getting the prompt to update.
http://forum.xda-developers.com/fire-tv/help/stagefright-bug-root-possiblity-t3167059/page7
santamanga said:
http://forum.xda-developers.com/fire-tv/help/stagefright-bug-root-possiblity-t3167059/page7
Click to expand...
Click to collapse
So by reading that I get the impression that updates cannot be blocked. What causes the update prompt, I ask because I don't see it when I initially turn on my stick, it only appears after its been in use for a while. Since I never updated my fire stick at the initial setup, is it just a nag to do the initial first update?
Hey Guys, hope this Question is not too stupid
Just read the amazon is going to update the AFTV 1gen to FireOS5 soon - so i wanted to get the latest OS3 for my Boxes, and disabled the url-blocking.
Anyhow, its now open for two hours, and both dont find any update. Its running on 51.1.6.1_USER_516010220, so there should be definitly a new version available.
Is it likely that amazon stopped pushing new updates, as os5 will arrive soon? Or is it a normal behavior that it doesnt find any new version after a few hours?
Just want to avoid getting updated to os5 too early, but as my version has still some bugs (like bluetooth-delay) i'd love to see it getting updated to the last stable os3...
The operative word is "soon." It's not out yet.
Well - maybe i asked it wrong?
Its not about when the new OS is out - its about why i dont get the latest OS3
Did you try forcing a check in Settings or were you just waiting for it to auto-update?
Did you try rebooting the Fire TV? I'm not sure if you are actually using URL blocking (as you say) or just domain name blocking (as what is typically described here and on various other sites), but if the latter, the Fire TV may have a DNS cache with the "invalid" IP address.
My AFTV got in September the last Update!
Yes thanks - i guess it was the DNS-caching. After leaving it for day as it was, finally a manual check was successful. Cheers!
dafunkydan said:
Yes thanks - i guess it was the DNS-caching. After leaving it for day as it was, finally a manual check was successful. Cheers!
Click to expand...
Click to collapse
I've experienced the same thing. I've powered on an AFTV that has been off for a few months and it doesn't update even though it's on software that is several versions old. I've found that making it forget and reconnect to a network helps get it to find the update. Factory reseting also helps.
Today my Fire TV Stick auto-updated to 5.0.5.1. It was rooted with Kingroot, but I've been too busy to get around to blocking updates or anything else.
Is there any hope to ever root it again?
Glaux said:
Today my Fire TV Stick auto-updated to 5.0.5.1. It was rooted with Kingroot, but I've been too busy to get around to blocking updates or anything else.
Is there any hope to ever root it again?
Click to expand...
Click to collapse
For now it is no other way to root it if upgraded to OS5.0.5.1
Check aftvnews.com There is a method to root with the usb cable working on your OS version
guiso98 said:
Check aftvnews.com There is a method to root with the usb cable working on your OS version
Click to expand...
Click to collapse
Not with a stick.
AFAIK there is no regular root besides Kingroot known for the stick.
Well, turns out it doesn't matter because the device is ****ed now for some reason. It has trouble booting up and won't even detect my WiFi AP.
I wonder if it's because of the update.
Glaux said:
Well, turns out it doesn't matter because the device is ****ed now for some reason. It has trouble booting up and won't even detect my WiFi AP.
I wonder if it's because of the update.
Click to expand...
Click to collapse
Have you tried to uninstall any apps you installed & then doing a factory reset ? Wonder if KingRoot left some stuff behind that are messing things up too.
sorry to but in here
but can i root and block OTA on brand new stick?
can i get root if my stick is not already setup new out of the box?
or do i have to update from whatever fw it shipped with to the latest to get adb and unknown apps turned on?
gdroid666 said:
sorry to but in here
but can i root and block OTA on brand new stick?
can i get root if my stick is not already setup new out of the box?
or do i have to update from whatever fw it shipped with to the latest to get adb and unknown apps turned on?
Click to expand...
Click to collapse
It depends what FW it comes with & if it comes with any FW update baked in. And if it comes with rootable FW. Then how fast can you turn ADB Debugging ON & run the "Block Update" commands.
All the best guides are found here: http://www.aftvnews.com/start/
Note: FTVS's = 1st-gen
The 1st-gen Fire TV can be rooted, using an app called KingRoot, if it is running software version 5.0.0 thru 5.0.5. Custom recovery and pre-rooted ROMs that are compatible with KingRoot rooted devices are currently in the works and will be released soon. Until those become available, it is recommended that you block software updates to ensure your Fire TV remains on a rootable software version and wait for custom recovery to be released. Once the pre-rooted ROMs and custom recovery are released, I will write a guide for rooting the Fire TV running 5.0.0 to 5.0.5 and update this page. It is important to block updates because Fire TV software version 5.0.5.1 and up block the KingRoot rooting method.
Click to expand...
Click to collapse
This is what I would try:
I would connect the FTVS to a routers Wifi that does NOT have internet working (By unplugging the modems Cat5 cable that goes from the modem to the router). I would turn on the internet once I got to the login/register Amazon Account page. As soon as I got past the login/register Amazon Account page I would disabled the internet again (By unplugging the modems Cat5 cable that goes from the modem to the router) while keeping the internetless wifi still working. Then I would rush to turn on ADB Debugging while also checking the FW version it came on. Then on that same internetless router I would block updates thru ADB.
Using Method 2 of this guide: http://www.aftvnews.com/how-to-block-software-updates-on-the-amazon-fire-tv-or-fire-tv-stick/
Just tested unplugging my modem Cat5 cable from my router. Although I did get a nag saying Network Error. I was just able dismiss it & continue on to the Settings. So I believe it should work. The trick is to give it enough internet to get past the login screen but not enough to download the latest FW update. And then BLOCK THE UPDATES THRU ADB DEBUGGING OFFLINE but still thru your router.
Then you can continue to ROOT if that's what you want. But there are no PreRooted FW for 1st Gen devices at this time. But soon there will be.
NOTE: If the latest FW 5.0.5.1 is already baked in from factory then there is nothing that can be done. But I think is to soon for devices to start showing like that.
thanks but in episode 34 of AFTV new he specifically says he has a guide specifically for getting past the initial update on a brand new fire tv stick, but i can not find it on the website, it asks what device you are rooting then it asks what FW you have but i obviously can't see that , i need the instructions for blocking initial update so his start guide needs to be updated to include and option like new fire tv stick unknown FW black ck initial update
he says in episode 34 that you can link tot eh guide for blocking intitial update on a new device from the root start guide but i cant find it
NM i found the guide
gdroid666 said:
thanks but in episode 34 of AFTV new he specifically says he has a guide specifically for getting past the initial update on a brand new fire tv stick, but i can not find it on the website, it asks what device you are rooting then it asks what FW you have but i obviously can't see that , i need the instructions for blocking initial update so his start guide needs to be updated to include and option like new fire tv stick unknown FW black ck initial update
he says in episode 34 that you can link tot eh guide for blocking intitial update on a new device from the root start guide but i cant find it
NM i found the guide
Click to expand...
Click to collapse
He linked it on the Eps. 34 notes:
http://www.aftvnews.com/how-to-complete-the-fire-tv-initial-setup-without-updating/
Y314K said:
He linked it on the Eps. 34 notes:
thanks i already found it but here is one thing i do not understand
he says you can use open DNS to block the amazon update servers to prevent the initial update but is this not impossible?
how can you possibly do this? don't you have to get past the setup screen and initial update to access the setting menu on the fire tv stick?
so how could you configure it to use open DNS if you can't get into settings until after you update and set it up?
is there some other way of accessing settings menu without going through initial setup? would this not defeat the whole purpose? if i can get into settings i can turn on adb and block updates, or is there a way to make it use open DNS without getting into the settings menu, this does not even make sense
correct me if i'm wrong but wouldn't you already need to be past the initial setup to get into the settings menu to configure the fire tv stick to use open DNS in the 1st place?
Click to expand...
Click to collapse
gdroid666 said:
thanks i already found it but here is one thing i do not understand
he says you can use open DNS to block the amazon update servers to prevent the initial update but is this not impossible?
how can you possibly do this? don't you have to get past the setup screen and initial update to access the setting menu on the fire tv stick?
so how could you configure it to use open DNS if you can't get into settings until after you update and set it up?
is there some other way of accessing settings menu without going through initial setup? would this not defeat the whoele purpose? if i can get into settings i can turn on adb and block updates, or is there a way to make it use open DNS without getting into the settings menu, this does not even make sense
correct me if i'm wrong but wouldn't you already need to be past the intial setup to get into the settings menu to configure the fire tv stick to use open DNS int he 1st place?
Click to expand...
Click to collapse
That is why I wrote the instructions I wrote. It's much faster to only plug in the Cat5e cable for internet to the router just to get past the Amazon login/registration page then to change DNS settings on the device. Once you have unplugged the internet Ca5e cable from your router. Then you have all the time in the world to mess with settings (ADB Debbuging &/or DNS) on the device. You might even be able to Root the device OFFLine (Although I've never read someone do it this way).
Plugging & plugging the internet Cat5e cable will only take seconds to get past the login/register screen. We are hopping those seconds will not be enough time for the update to download.
---------- Post added at 12:49 PM ---------- Previous post was at 12:43 PM ----------
Hold on. Testing something out right now.
---------- Post added at 01:04 PM ---------- Previous post was at 12:49 PM ----------
@gdroid666
Blocking thru OpenDNS first should work fine. Since When you first boot your FTVS you will first be ask to connect to a Network before you are asked to login/register to an Amazon account. There should be an "Advanced" option when assigning your Wifi values. Which will let you input OpenDNS settings like in the 2nd Option of the following guide.
http://www.aftvnews.com/how-to-manu...server-on-an-amazon-fire-tv-or-fire-tv-stick/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Make sure you follow the "Configure password protected Wireless Connection". But use the OpenDNS values: 208.67.222.222 and 208.67.220.220 . Make sure you have already created an OpenDNS account & registered your IP on that account. AKA follow the guides over a AFTVNews.com
Y314K said:
That is why I wrote the instructions I wrote. It's much faster to only plug in the Cat5e cable for internet to the router just to get past the Amazon login/registration page then to change DNS settings on the device. Once you have unplugged the internet Ca5e cable from your router. Then you have all the time in the world to mess with settings (ADB Debbuging &/or DNS) on the device. You might even be able to Root the device OFFLine (Although I've never read someone do it this way).
Plugging & plugging the internet Cat5e cable will only take seconds to get past the login/register screen. We are hopping those seconds will not be enough time for the update to download.
Click to expand...
Click to collapse
yes i plan on doing that and also on blocking the update domains in my router too
i am just wondering why he would tell us to do something that is impossible to do
also i watched his video so if i do the unplug the cable bit then do i do it both times or just 1st time? there is 2 points where he says to kill the internet
nothing this guy says makes any god damn sense
1st thing he tells us to do is physically impossible the = watch his video
in his video he shows he already has a wifi connection setup and he lets it check for updates, then he does it again and says to kill the internet connection before it gets to the checking for updates step so which is it?let it go to check for updates or don;t let it go to check for updates? why does he do it twice?, i don't understand this **** at all ,
and people are reporting that blocking the updates in the router is not working so if i followed his guide i would be updated because he let it go to checking for updates and depended on router blocking which is reported as not reliable
gdroid666 said:
yes i plan on doing that and also on blocking the update domains in my router too
i am just wondering why he would tell us to do something that is impossible to do
also i watched his video so if i do the unplug the cable bit then do i do it both times or just 1st time? there is 2 points where he says to kill the internet
nothing this guy says makes any god damn sense
1st thing he tells us to do is physically impossible the = watch his video
in his video he shows he already has a wifi connection setup and he lets it check for updates, then he does it again and says to kill the internet connection before it gets to the checking for updates step so which is it?let it go to check for updates or don;t let it go to check for updates? why does he do it twice?, i don't understand this **** at all ,
and people are reporting that blocking the updates in the router is not working so if i followed his guide i would be updated because he let it go to checking for updates and depended on router blocking which is reported as not reliable
Click to expand...
Click to collapse
I think your just misreading things. I base everything I do to my FTV(S)'s on AFTVNews.com guides. I just tweak things to fit my exact options. Elias knows what he is doing. And I completely trust him & his guides. There has been a bunch of changes the last week. But his guides have been updated & are still correct. I will try to explain the parts you are misreading. I always make sure I understand all the steps I am going to take before modding anything. Your doing what I would do. And that is to ask ?'s until I understand things. Will try to help you. Gonna refresh my recollection of his video walk-thru & will post back an explanation of the steps & my recommendations.
Y314K said:
I think your just misreading things. I base everything I do to my FTV(S)'s on AFTVNews.com guides. I just tweak things to fit my exact options. Elias knows what he is doing. And I completely trust him & his guides. There has been a bunch of changes the last week. But his guides have been updated & are still correct. I will try to explain the parts you are misreading. I always make sure I understand all the steps I am going to take before modding anything. Your doing what I would do. And that is to ask ?'s until I understand things. Will try to help you. Gonna refresh my recollection of his video walk-thru & will post back an explanation of the steps & my recommendations.
Click to expand...
Click to collapse
yeah i'm sure he know what he is doing but his video on preventing initial update was not good
i am about to say F it and give up my router sucks and website blocking is not working , never but linksys/ cisco they ripped me off and their product is awful
i never used blocking before but it does not work this is just too complicated to do i give up
F it i will just return it and buy an android box
i know nothing about networking and i HATE having to mess with my router and settings i never do and now i get in there and do everything i read to do and it does not block anything i put in there
i never used open DNS before either and do not know which IP i am supposed to link it to, home IP what is that? IP v4 , IPv6 where do i even get that? cmd , ipconfig?
i really know nothing about networking or routers or DNS
@gdroid666
AFTVNews guides are made for multiple devices @ different steps of the process. This might confuse some. But reviewing & asking ?'s should help those few.
Make sure you understand step by step what you are doing before getting started.
Don't get fixated on the video or anything you don't understand right now. You will get thru it.
No ? is a dumb ?. Even if you have to ask it dozens of time until you get an answer you understand.
Try to be as specific as possible so nothing falls thru the cracks.
All the info below has been glean from AFTVNews.com guides.
Your specific ? was how to block updates & root a FTVS that is NIB (New In Box).
Blocking updates thru the router is not dependable anymore. Amazon started to use HTTPS which most routers can not block.
Blocking updates thru the OpenDNS method is the only option to block updates before an FTVS ever goes online.
After blocking the updates thru OpenDNS then you block the update thru ADB. And that should get you set until there is a ROM for FTVS's. You can choose to root now or to wait.
All this steps have guides. And they are very easy to follow. I can do a breakdown for you if you want.
ok trying to setup an open DNS account but this guide leaves out tons of stuff it is asking me all kinds of stuff like what kinds of device, i picked router , what router , i picked my brand linksys, my model is not listed now it wants me to go into the router and put in all kinds of settings, etc etc etc do i have to do all of this i have no idea what i am doing here
gdroid666 said:
ok trying to setup an open DNS account but this guide leaves out tons of stuff it is asking me all kinds of stuff like what kinds of device, i picked router , what router , i picked my brand linksys, my model is not listed now it wants me to go into the router and put in all kinds of settings, etc etc etc do i have to do all of this i have no idea what i am doing here
Click to expand...
Click to collapse
http://www.aftvnews.com/how-to-block-software-updates-on-the-amazon-fire-tv-or-fire-tv-stick/#router
Only follow the Method 4 Guide. You should be able to skip setting up your router info. And only setup the parts in the guide. And you shouldn't do any changes in your router. Actually setting up your router shouldn't be to difficult. And would give the best results. But IT IS NOT REQUIRED for the block to work. As long as your IP doesn't change constantly. And specially when your booting up the FTVS for the first time. Also finding your IP address is easy. You should be able to get it from https://dnsleaktest.com & from https://www.myip.ms & tons of other website. I only run on iPv4. So check to make sure what iPv your ISP runs on. And report back.
Y314K said:
http://www.aftvnews.com/how-to-block-software-updates-on-the-amazon-fire-tv-or-fire-tv-stick/#router
Only follow the Method 4 Guide. You should be able to skip setting up your router info. And only setup the parts in the guide. And you shouldn't do any changes in your router. Also finding your IP address is easy. You should be able to get it from https://dnsleaktest.com & from https://www.myip.ms & tons of other website. I only run on iPv4. So check to make sure what iPv your ISP runs on. And report back.
Click to expand...
Click to collapse
i don't know the guide is incomplete when i try and set up the account for open DNS the home one it says , it says i have to chose a device there are 4 options home router, computer workstations and laptops ,smart devices and servers
i chose home router (recommended)
then it asks what brand i pick my brand , linksys, then it asks what model , my model is not listed i pick generic configuration , then it says to go into router settings and enter these numbers/ addresses for static DNS 1 ,2, 3
i did that and saved the settings in my router then it says next test your new settings, but everytime i do it it just says failed and then loops me back to the pick device page again , one big loop i can not complete the open DNS registration setup , what do i do?
Hello. Yesterday me friend gave me Fire TV 2. Today I started to play this thing. The problems started at beginning I've paired remote connected to wifi network and connection was successful the second step was update and I see such info Unable to update Fire stick TV so I disconnected power reboot and once again the same message hmmmm... I've contacted with amazon and they told me that device was not fully fulfilled so nice lady registered device on my account and bang finally I could register on my account on Fire TV and I think great the device started to working now but I've checked and see I have old firmware on this device so I want to update this and here is my problem the device never ends "checking for update..." in settings menu. My firmware version is 5.0.4 536116920. Could someone help me manually update firmware example via adb or other way ? I'll be very glad for any help. I don't know history of this device and I don't know is it ROOTed or not
Best regards prudicz
prudicz said:
Hello. Yesterday me friend gave me Fire TV 2. Today I started to play this thing. The problems started at beginning I've paired remote connected to wifi network and connection was successful the second step was update and I see such info Unable to update Fire stick TV so I disconnected power reboot and once again the same message hmmmm... I've contacted with amazon and they told me that device was not fully fulfilled so nice lady registered device on my account and bang finally I could register on my account on Fire TV and I think great the device started to working now but I've checked and see I have old firmware on this device so I want to update this and here is my problem the device never ends "checking for update..." in settings menu. My firmware version is 5.0.4 536116920. Could someone help me manually update firmware example via adb or other way ? I'll be very glad for any help. I don't know history of this device and I don't know is it ROOTed or not
Best regards prudicz
Click to expand...
Click to collapse
Thanks your post gave me a hint to solve my similar issue. I was stuck on the update page.
So I went my Solution: I had to unregister the Fire TV from https://www.amazon.com then it worked,.
Go to www.aftvnews.com/root to solve yours
To test if you have root just use es file explorer it has a root explorer, ... Good luck