Hello my galaxy i747 is hard bricked really hard i accedently Deleted all my files on storge and sd card then i got bricked cant get in to download mode or recovery & jig and jtag didnt work also sd card method so i cant to anything please help me! (Sorry for bad english)
shilian11 said:
Hello my galaxy i747 is hard bricked really hard i accedently Deleted all my files on storge and sd card then i got bricked cant get in to download mode or recovery & jig and jtag didnt work also sd card method so i cant to anything please help me! (Sorry for bad english)
Click to expand...
Click to collapse
To get real help from here, you really need to give more information on what went wrong. Specifically, what caused the brick? Were you flashing any firmware? If so, what were you flashing and how?
A J-Tag is the ultimate solution to any bricking problem caused by firmware failure as this forces firmware installation directly to the motherboard so if you say you tried this and it didn't work, I'm afraid it may not be a firmware problem you have.
i plug in my phone deleted all my files ALL aand then flashed firmware of Hiemdall firmware then i got PASS on odin then Galaxy icon popup and then black screen and nothing more.
You said you already tried a jtag service and it didn't work. More than likely its irreparable on that case. Sorry to hear about that....
well i got nothing to say only ccry maybe.
shilian11 said:
well i got nothing to say only ccry maybe.
Click to expand...
Click to collapse
I hard bricked my galaxy s3 i747 when I flashed a bad modem on 4.4.2. Has anyone been able to successfully unbrick with jtag on 4.4.2?
Not to my knowledge. If a way is found it will be posted in the actual debrick thread. If its not there its not been done yet.
Related
My friend decided to use the EZ-Unlock app(link below) that unlocks the bootloader for the verizon galaxy s3 on my i747 and well it is now a brick, is there anything i can do to fix this without a JTAG?
omeadsthename said:
My friend decided to use the EZ-Unlock app(link below) that unlocks the bootloader for the verizon galaxy s3 on my i747 and well it is now a brick, is there anything i can do to fix this without a JTAG?
Click to expand...
Click to collapse
yes, take him outside and beat the crap out of him. Then take his money and go get a new phone.
Other than that, I don't know.
Can you access download mode or recovery?
jack man said:
yes, take him outside and beat the crap out of him. Then take his money and go get a new phone.
Other than that, I don't know.
Can you access download mode or recovery?
Click to expand...
Click to collapse
No I cannot, my friend(parklane79) and I actually found a method, it seems promising but i need to try it out first.
im not afforded the link rights yet but the title is "Fixing a bootloader-bricked Galaxy S3 using an SD card (Qualcomm SGS3 variants)" and a more simpler guide for n00bs(although not a complete n00b been doing this for a few years now :good: ) like myself, "[GUIDE]Unbrick a Hard Bricked SPRINT Galaxy S3 (Without JTAG)" but for the second guide you need to grab the i747 debrick.img off the first page of the first guide.
omeadsthename said:
No I cannot, my friend(parklane79) and I actually found a method, it seems promising but i need to try it out first.
im not afforded the link rights yet but the title is "Fixing a bootloader-bricked Galaxy S3 using an SD card (Qualcomm SGS3 variants)" and a more simpler guide for n00bs(although not a complete n00b been doing this for a few years now :good: ) like myself, "[GUIDE]Unbrick a Hard Bricked SPRINT Galaxy S3 (Without JTAG)" but for the second guide you need to grab the i747 debrick.img off the first page of the first guide.
Click to expand...
Click to collapse
Yea tried with a class 10 16g micro sd like a million times and it wont work.and i think its because i dont have the 4.4.2 img if some one could help me out by uploading it. u et the img via busybox dd if=/dev/block/mmcblk0 of=/sdcard/backup.bin bs=1M count=70
So the phone won't power on at all? Can't get into download or recovery?
are you %100 certain it's the AT&T 4.3 debrick.img? did you put it on the SD card using win32diskimager?
audit13 said:
So the phone won't power on at all? Can't get into download or recovery?
Click to expand...
Click to collapse
The phone won't even vibrate. Wish i could get to DL/Recovery mode. :/
yowski said:
are you %100 certain it's the AT&T 4.3 debrick.img? did you put it on the SD card using win32diskimager?
Click to expand...
Click to collapse
im 100% sure. the issue is tho that i was on 4.4.2 and dont know it an i747(AT&T) 4.3 debrick.img has the same handshake/protocol whatever you want to call it as a 4.4.2 debrick.img I tried it out tho anyways. but in short yes im 100% sure it was a 4.3 debrick img. And yes I did use win32diskimager. I tried once on linux mint but i believe the file corrupted so i just ended up using win32DM. I mean they are supposed to do the same thing, if im not mistaken
omeadsthename said:
The phone won't even vibrate. Wish i could get to DL/Recovery mode. :/
im 100% sure. the issue is tho that i was on 4.4.2 and dont know it an i747(AT&T) 4.3 debrick.img has the same handshake/protocol whatever you want to call it as a 4.4.2 debrick.img I tried it out tho anyways. but in short yes im 100% sure it was a 4.3 debrick img. And yes I did use win32diskimager. I tried once on linux mint but i believe the file corrupted so i just ended up using win32DM. I mean they are supposed to do the same thing, if im not mistaken
Click to expand...
Click to collapse
when you plug it into the computer does anything come up? also, when you plug it in with no battery do you get a red LED?
yowski said:
when you plug it into the computer does anything come up? also, when you plug it in with no battery do you get a red LED?
Click to expand...
Click to collapse
Yes my comp tries to install that one qualcomm driver. and when i plug in without battery a red LED comes on.
omeadsthename said:
Yes my comp tries to install that one qualcomm driver. and when i plug in without battery a red LED comes on.
Click to expand...
Click to collapse
Then you should be able to use a debrick.img. are you using an sd card the same size as your phone's internal memory? if you had it on 4.4.2 then you might need a debrick.img from someone with the same phone on the same network running 4.4.2?
yowski said:
Then you should be able to use a debrick.img. are you using an sd card the same size as your phone's internal memory? if you had it on 4.4.2 then you might need a debrick.img from someone with the same phone on the same network running 4.4.2?
Click to expand...
Click to collapse
yes i am using same size card. and i have been asking all over for a 4.4.2 debrick img but no one has uploaded.
omeadsthename said:
yes i am using same size card. and i have been asking all over for a 4.4.2 debrick img but no one has uploaded.
Click to expand...
Click to collapse
sounds like you're stuck until you get that .img file. If you know someone with the same phone you could maybe get them to install 4.4.2 and get the file from them? otherwise keep asking around or wait until 4.4.2 is released for the s3, which might take a while.
yowski said:
sounds like you're stuck until you get that .img file. If you know someone with the same phone you could maybe get them to install 4.4.2 and get the file from them? otherwise keep asking around or wait until 4.4.2 is released for the s3, which might take a while.
Click to expand...
Click to collapse
Unfortunately kids at my high school are afraid of rooting, so xda is basically my only bet. Im just surprised that some sr member hasnt added a debrick img to their threads. I mean its 4.4 and this is android central!
omeadsthename said:
yes i am using same size card. and i have been asking all over for a 4.4.2 debrick img but no one has uploaded.
Click to expand...
Click to collapse
i would help you out but my S3 is currently hard bricked on stock 4.3 and im sending it back to the insurance company once my S4 arrives tomorrow.
yowski said:
i would help you out but my S3 is currently hard bricked on stock 4.3 and im sending it back to the insurance company once my S4 arrives tomorrow.
Click to expand...
Click to collapse
Cant they find out that you are root and hard bricked? like doesnt that void warranty. and if its a 4.3 h brick cant u just use the sd method?
omeadsthename said:
yes i am using same size card. and i have been asking all over for a 4.4.2 debrick img but no one has uploaded.
Click to expand...
Click to collapse
I did, it was on CM 10.2 when i had flashed improper bootloaders and bricked it. I used the sd card to install 4.3, unroot+ reset flash counter then took it out so it went back to bricked. My only fear is that they may some how get it into download mode instead of just replacing the board and see the warranty bit: 1 which isnt able to be reset as it is an e-fuse which is blown when you install firmware without knox.
yowski said:
I did, it was on CM 10.2 when i had flashed improper bootloaders and bricked it. I used the sd card to install 4.3, unroot+ reset flash counter then took it out so it went back to bricked. My only fear is that they may some how get it into download mode instead of just replacing the board and see the warranty bit: 1 which isnt able to be reset as it is an e-fuse which is blown when you install firmware without knox.
Click to expand...
Click to collapse
Are you using the samsung warranty of AT&T? And also if the sd card is working for u cant you just use odin to flash? Or does the sd card not fix any bootloader issues?
omeadsthename said:
Are you using the samsung warranty of AT&T? And also if the sd card is working for u cant you just use odin to flash? Or does the sd card not fix any bootloader issues?
Click to expand...
Click to collapse
im sending in it through bell mobility. it was a replacement phone that i paid the $150 deductable on and has a 90 warranty. I said it was having issues/defective so they sent an s4 as free replacement on the 90 day. I prefer it to be bricked to fit the defective description as well as to decrease the chances of them finding out i had messed with it, the only real sign being "warranty bit: 1" in red on the download screen. I did use odin to flash the current 4.3 stock that it has right now, and i might be able to get it to boot without the card if i flash the bootloaders some more despite having done it twice and the card still being required. Like i said though, i prefer it hard bricked and i've erased every sign other than warranty bit: 1 that i messed with it by installing stock, unrooting, and resetting flash counter.
yowski said:
im sending in it through bell mobility. it was a replacement phone that i paid the $150 deductable on and has a 90 warranty. I said it was having issues/defective so they sent an s4 as free replacement on the 90 day. I prefer it to be bricked to fit the defective description as well as to decrease the chances of them finding out i had messed with it, the only real sign being "warranty bit: 1" in red on the download screen. I did use odin to flash the current 4.3 stock that it has right now, and i might be able to get it to boot without the card if i flash the bootloaders some more despite having done it twice and the card still being required. Like i said though, i prefer it hard bricked and i've erased every sign other than warranty bit: 1 that i messed with it by installing stock, unrooting, and resetting flash counter.
Click to expand...
Click to collapse
hmm i wish i could do that to my phone too. i mean, i dont even know how i would unroot without getting my phone on. but if im this hard bricked they probs cant tell anyways. im guessing?
uz unlock HARD BRICKING S3'S
omeadsthename said:
My friend decided to use the EZ-Unlock app(link below) that unlocks the bootloader for the verizon galaxy s3 on my i747 and well it is now a brick, is there anything i can do to fix this without a JTAG?
Click to expand...
Click to collapse
I DID THE SAME THING ! but i used debrick (i535 vzw 4.3 ) and it pattially worked at least it will recovery and odin but i think it needs to be the 40 mbps type card the black micro would not work for me , then i flashed the wrong recovery and am starting all over but the debrick still getting me into odin thats ware you will sideload the right recovery and firmware ,rom what ever hope ( i even paid for cdma work shop and it aint did jack ) debrick then odin sideload look it up thats the best i got
So i have an i747 galaxy s3 and was running 4.4.2, and i am hard bricked, let me assure you i have tried the 16gb micro sd debrick.img but it still wont work althought i only had a 4.3 debrick.img.So if some one can give me a 4.4.2 debrick.img by doing this
"busybox dd if=/dev/block/mmcblk0 of=/sdcard/backup.bin bs=1M count=70"
And uploading it i would greatly appreciate it. i am not sure if this method will work and here is why, it was bricked by using a version of ezunlocker for a verizon phone to unlock my att phone's boot loader.If any one can help me out and upload the file that would be great and also if any one has any input regarding the usage of the ezunlocker and the status of my phone and the fix using the 16gb debrick.img method and can give any. again it would be great.
omeadsthename said:
So i have an i747 galaxy s3 and was running 4.4.2, and i am hard bricked, let me assure you i have tried the 16gb micro sd debrick.img but it still wont work althought i only had a 4.3 debrick.img.So if some one can give me a 4.4.2 debrick.img by doing this
"busybox dd if=/dev/block/mmcblk0 of=/sdcard/backup.bin bs=1M count=70"
And uploading it i would greatly appreciate it. i am not sure if this method will work and here is why, it was bricked by using a version of ezunlocker for a verizon phone to unlock my att phone's boot loader.If any one can help me out and upload the file that would be great and also if any one has any input regarding the usage of the ezunlocker and the status of my phone and the fix using the 16gb debrick.img method and can give any. again it would be great.
Click to expand...
Click to collapse
i looked all over the internet for this. finally the right 4.4~ is found
https://www.androidfilehost.com/?w=files&flid=15759
The i747 bootloader is not locked. I have no idea what that Verizon app would have done, but if that's what bricked it, our debrick method may not work. We also have not been able to restore any 4.4.2 bricks yet. Thats why i posted a new script to create the image, in hopes that doing it a little differently would help.
I wish you luck, but considering how it was bricked, dont get your hopes up too much. Its still worth trying of course, but i have a feeling a jtag service might be the only way.
did same on my first s3 i747. tried to unlock a already unlocked bootloader. before i knew any better, went and got a new s3. (back in my pre-newb days...before i could even claim newbness status.lol), then discovered XDA. started reading and found out about jtag. now that s3 belongs to my brother.
not helpful, i know. just my story.good luck with debrick.img method.
:thumbup:
err on the side of kindness
Anybody know where I can get a debrick image for 4.1.2 (i747) ??
- Guy in desperate need who's been googling for wayy too long now
think theres one here.
http://forum.xda-developers.com/showthread.php?t=2525902
thanks to @DocHoliday77
good luck
err on the side of kindness
mrrocketdog said:
think theres one here.
http://forum.xda-developers.com/showthread.php?t=2525902
thanks to @DocHoliday77
good luck
err on the side of kindness
Click to expand...
Click to collapse
Thank you... Here goes nothing.
let us know how it goes.
err on the side of kindness
mrrocketdog said:
let us know how it goes.
err on the side of kindness
Click to expand...
Click to collapse
Unfortunately it did not work
I was orignally on 4.1.2 and flashed task650's newest AOKP release with CWM but for some reason was bootlooping and could not get past the "Swagger Activated" boot animation. So then I tried to revert back to the stock rom via Odin but I must have tried flashing a 4.3 stock rom because it's bricked pretty good now. Odin does not recognize the phone - device manager displays it as QSHUSB_DLOAD. I've tried making my own jig with no luck. And just recently, I've tried 3 different i747 debrick images using the sd card method (16gb / class 10). Up until just an hour ago, I could take the battery out and plug the phone into my laptop via usb cable and the red light would come on but that doesn't even happen anymore. When I hold down the 3 button combination everynow and then I'll hear Windows "device connect noises" as if it's trying to connect but nothing will happen. I know the correct Samsung drivers are installed on my pc because everything was showing up fine prior to me flashing the AOKP rom.
I'm beginning to think there no more hope for me. Idk if I wan't to bother having my phone shipped out and serviced or JTAG'ed or whatever.
Have you tried different sd cards. Many people find some won't work, while others do.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
omeadsthename said:
So i have an i747 galaxy s3 and was running 4.4.2, and i am hard bricked, let me assure you i have tried the 16gb micro sd debrick.img but it still wont work althought i only had a 4.3 debrick.img.So if some one can give me a 4.4.2 debrick.img by doing this
"busybox dd if=/dev/block/mmcblk0 of=/sdcard/backup.bin bs=1M count=70"
And uploading it i would greatly appreciate it. i am not sure if this method will work and here is why, it was bricked by using a version of ezunlocker for a verizon phone to unlock my att phone's boot loader.If any one can help me out and upload the file that would be great and also if any one has any input regarding the usage of the ezunlocker and the status of my phone and the fix using the 16gb debrick.img method and can give any. again it would be great.
Click to expand...
Click to collapse
Try this Its a debrick image from a 4.4.2 SGH-1747 >>> filedropper.com/debrick <<<
Ehaeli said:
Try this Its a debrick image from a 4.4.2 SGH-1747 >>> filedropper.com/debrick <<<
Click to expand...
Click to collapse
do you have the actual link for that file?
think it might be in this thread..
http://forum.xda-developers.com/showthread.php?t=2820019
REMEMBER please....backup and read read read.
good luck:thumbup:
err on the side of kindness
Looking for a debrick image
Hello, I am looking for someone who can upload a debrick image for I747mvlufnh2 4.4.2 for the 16gb I have searched everywhere without any luck.
Gal tales said:
Hello, I am looking for someone who can upload a debrick image for I747mvlufnh2 4.4.2 for the 16gb I have searched everywhere without any luck.
Click to expand...
Click to collapse
ht#tp://d-h.st/w7g This is the one that worked for me on my sgh-i747M 4.4.2 with koodo . . ive got my phone to turn back on and now im working on getting it to turn on without the sdcard boot
i hope i linked it properly . im too new to post outside links so just remove the # when you copy and paste in the url
I need some for i747 only please !!!!
mitch0422 said:
ht#tp://d-h.st/w7g This is the one that worked for me on my sgh-i747M 4.4.2 with koodo . . ive got my phone to turn back on and now im working on getting it to turn on without the sdcard boot
i hope i linked it properly . im too new to post outside links so just remove the # when you copy and paste in the url
Click to expand...
Click to collapse
Im from mexico. And hard bricked my s3 i flashed a canadian nk2 kk. But when i turn it off never came on againg. So please help me. Im new to all this. I need examples with potatoes. Lol. What else do i need besides this image..
Enviado desde mi GT-I9505 mediante Tapatalk
bighleo114312 said:
Im from mexico. And hard bricked my s3 i flashed a canadian nk2 kk. But when i turn it off never came on againg. So please help me. Im new to all this. I need examples with potatoes. Lol. What else do i need besides this image..
Enviado desde mi GT-I9505 mediante Tapatalk
Click to expand...
Click to collapse
you can try here .....
http://forum.xda-developers.com/showthread.php?t=2549068
i see you found it. nevermind.
"all i can really do , is stay out of my own way and let the will of heaven be done"
mitch0422 said:
ht#tp://d-h.st/w7g This is the one that worked for me on my sgh-i747M 4.4.2 with koodo . . ive got my phone to turn back on and now im working on getting it to turn on without the sdcard boot
i hope i linked it properly . im too new to post outside links so just remove the # when you copy and paste in the url
Click to expand...
Click to collapse
Mitch0422 i have downloaded the 4.4.2 image but i cant turn on my s3. Do i just need to write it to sd and turn on s3?
Enviado desde mi SCH-I535 mediante Tapatalk
Yes
bighleo114312 said:
Mitch0422 i have downloaded the 4.4.2 image but i cant turn on my s3. Do i just need to write it to sd and turn on s3?
Enviado desde mi SCH-I535 mediante Tapatalk
Click to expand...
Click to collapse
Sorry for the long wait for reply . i don't often check my email. To answer you question . Yes you have to write it to the microsd as a bootable image then insert the microsd and boot the phone . it might take awhile of holding down the power button before it shows signs of life. You might also have to take the battery out and try a few times . Once you have it booted back up use Odin to flash the stock rom back onto your phone then take out the sd card and try to turn it on. Follow these directions youtube.com/watch?v=8MnikrpUKZw
Hi,
I have a T989 that's been hard bricked for some time now. I wasn't interested in sending it out for JTAG because it was just a backup phone and it served its purpose. When it was working, it was a great phone.
Recently I came across a thread (http://forum.xda-developers.com/showthread.php?t=2439367) that shows how to unbrick a T999 (T-Mobile Galaxy S3) that shows QHSUSB_DLOAD without JTAG. (QHSUSB_DLOAD shows up in device manager when I plug my phone via usb.)
My question is, could this solution posibly work for the T989?
Thanks in advance.
You'll never know if you don't try... It's already hard bricked. What's the worst that could happen?
NEPAT989 said:
Hi,
I have a T989 that's been hard bricked for some time now. I wasn't interested in sending it out for JTAG because it was just a backup phone and it served its purpose. When it was working, it was a great phone.
Recently I came across a thread (http://forum.xda-developers.com/showthread.php?t=2439367) that shows how to unbrick a T999 (T-Mobile Galaxy S3) that shows QHSUSB_DLOAD without JTAG. (QHSUSB_DLOAD shows up in device manager when I plug my phone via usb.)
My question is, could this solution posibly work for the T989?
Thanks in advance.
Click to expand...
Click to collapse
it would be great if this worked with our t989, i think i saw this thread on another website somewhere but doubted it too easily, i have 3 of these phones now xD hardbricked one, and on one it will not display anything, i have tried new screens but nothing, i think its the Ribbon cable on the motherboard.
T989 unbrick similar to T999
Trozzul said:
it would be great if this worked with our t989, i think i saw this thread on another website somewhere but doubted it too easily, i have 3 of these phones now xD hardbricked one, and on one it will not display anything, i have tried new screens but nothing, i think its the Ribbon cable on the motherboard.
Click to expand...
Click to collapse
Does anyone know if someone can create a zip file similar to debrick zip used in the T999? Is it simply a boot image?
I was updating an s3 running cyanogenmod 10.2.1 to 11. I realized that the bootloader needed to be updated long story short i accidentally flashed the i9300 bootloader instead and now my phone is hard bricked. I heard about a method using the sd card to allow the phone to enter boot recovery so i could get into download mode could someone help me to do this?
The only fix that I personally know of is using a jtag service. If there is an sd card fix floating around out there, you'll need to search for it. If you fail, mobiletechvideos.com can help. Expect a week to 10 day turn around time
Sent from my SAMSUNG-SGH-I747 using Tapatalk
purelight97 said:
I was updating an s3 running cyanogenmod 10.2.1 to 11. I realized that the bootloader needed to be updated long story short i accidentally flashed the i9300 bootloader instead and now my phone is hard bricked. I heard about a method using the sd card to allow the phone to enter boot recovery so i could get into download mode could someone help me to do this?
Click to expand...
Click to collapse
You are probably referring to the method posted in the thread below ....
http://forum.xda-developers.com/showthread.php?t=2549068
You have nothing to lose in giving it a try. Doubtful if it will work, however, since it is specifically for recovering from a brick caused by flashing an older bootloader after 4.3 upgrade. As BrianRay advised, when you have a brick caused by flashing a different model's bootloader, a JTag operation may be required.
Larry2999 said:
You are probably referring to the method posted in the thread below ....
http://forum.xda-developers.com/showthread.php?t=2549068
You have nothing to lose in giving it a try. Doubtful if it will work, however, since it is specifically for recovering from a brick caused by flashing an older bootloader after 4.3 upgrade. As BrianRay advised, when you have a brick caused by flashing a different model's bootloader, a JTag operation may be required.
Click to expand...
Click to collapse
Thanks, you wouldn't happen to have a 4.1.2 debrick.img?
purelight97 said:
Thanks, you wouldn't happen to have a 4.1.2 debrick.img?
Click to expand...
Click to collapse
Sadly, no, I don't. You could create one, however, if you know someone who has a similar device running 4.1.2. If you need further instructions on how to do this, you would need to contact the author of the original post. He is the expert there. A JTag may still be your best option, however.
Hey, try to get the phone into a download mode by using at USB jig. You can buy one for 3 bucks from ebay. If that doesnt do it, then you can go to the method of using the debrick image.
Once you exhaust all of these possibilities, then you can try the JTAG. But the Jtag service is expensive too. Good luck.
Greetings,
As you can already tell from the listing on this post, I have hard bricked my S III,
I accidently hard bricked my SIII, by mistaking flashing a international rom, In the description of the rom it even stated it WAS
for my model of phone. They Lied....
Anyways, I done some research and came across a few ways of debricking it, None of which seem to be working. Although I am able to
Get a red charge light on my phone when I plug it into my computer with the battery out. Also, I am unable to Boot into Recovery or Download Mode.
Can you please help me.
Android Sketch said:
Greetings,
As you can already tell from the listing on this post, I have hard bricked my S III,
I accidently hard bricked my SIII, by mistaking flashing a international rom, In the description of the rom it even stated it WAS
for my model of phone. They Lied....
Anyways, I done some research and came across a few ways of debricking it, None of which seem to be working. Although I am able to
Get a red charge light on my phone when I plug it into my computer with the battery out. Also, I am unable to Boot into Recovery or Download Mode.
Can you please help me.
Click to expand...
Click to collapse
JTAG ebay craigslist..
JTag Unbricking
vizionforever said:
JTAG ebay craigslist..
Click to expand...
Click to collapse
Yes, I am having problems finding the correct JTag jig. I have looked for ones that are for Galaxy S III's but none seem to be working with the SPH-L710. And has anyone actually used a JTag for unbricking this.
JTag Jig
Saafir said:
Jtag is likely your only hope. A usb jig is doubtful
Click to expand...
Click to collapse
I looked on the internet and found that when you look up Jtag , you are given given results for what looks like a jig for (a given phone), and that it will let your phone boot into download mode.
Is that what you are talking about being doubtful. And I do thank you for your responses.
I have also tried using a debrick Img file and installing it to my 16gig sd card, and gone down that route, but that did not work, which is why I am considering spending the money on a Jtag Jig...