CWM 6.0.4.8 Mounting storage not work - HTC One X

Title says everything I cant get get to phone storage when I mount USB storage, i installed latest version of CWM 6.0.4.8.

Or try to update the drivers, or flash philz 5.15. Mount the sdcard and wait literally minutes to let it pop up.

I've found this problem too.
I've tried to use CWM 6.0.4.8, TWRP 2.7.1.0 (Unofficial), Philz 6.19.3.
It doesn't have any recovery can mount USB storage. :crying:

Tokemon said:
I've found this problem too.
I've tried to use CWM 6.0.4.8, TWRP 2.7.1.0 (Unofficial), Philz 6.19.3.
It doesn't have any recovery can mount USB storage. :crying:
Click to expand...
Click to collapse
Flash Philz 5.15.9 after this copy what you need and after this flash again latest TWRP CWM or Philz

Thant said:
Flash Philz 5.15.9 after this copy what you need and after this flash again latest TWRP CWM or Philz
Click to expand...
Click to collapse
Now, I work with your step every time that I flash rom. But I need to know how can I fixed or something better?

Tokemon said:
Now, I work with your step every time that I flash rom. But I need to know how can I fixed or something better?
Click to expand...
Click to collapse
Can't you copy the ROM.zip through Android system? How long did you have patience to wait for sd card to show in your pc explorer?

Tokemon said:
Now, I work with your step every time that I flash rom. But I need to know how can I fixed or something better?
Click to expand...
Click to collapse
Yes like @[email protected]|-|oR say before flash new rom use the old rom to copy files to your sd card my way is if you dont have working rom and is for critical moments:silly:

[email protected]|-|oR said:
Can't you copy the ROM.zip through Android system? How long did you have patience to wait for sd card to show in your pc explorer?
Click to expand...
Click to collapse
I just found it after try to flash recovery that newer than CWM 5.8.4.0
Thant said:
Yes like @[email protected]|-|oR say before flash new rom use the old rom to copy files to your sd card my way is if you dont have working rom and is for critical moments:silly:
Click to expand...
Click to collapse
Thank so much

Related

[HELP] 4ext wont mount my sd card

4ext wont mount my sd card in the recovery
its 100% working anywhere else
tried wipe cach / dalvik / data / boot
but nothing works..plz help!!
PHOENIX-9 said:
4ext wont mount my sd card in the recovery
its 100% working anywhere else
tried wipe cach / dalvik / data / boot
but nothing works..plz help!!
Click to expand...
Click to collapse
When you say anywhere else, does this include another recovery? Also is it working when the phone is powered on?
thekool11 said:
When you say anywhere else, does this include another recovery? Also is it working when the phone is powered on?
Click to expand...
Click to collapse
yes it works perfectly when the phone is on
i dont know any other recovery but the CWM..i dont know how to restore it !
PHOENIX-9 said:
yes it works perfectly when the phone is on
i dont know any other recovery but the CWM..i dont know how to restore it !
Click to expand...
Click to collapse
Well for the DHD/Inspire 4g the only 3 recoveries I know of are
1.4ext Recovery
2.TWRP Recovery
3. CWM (obviously)
numbers 2 & 3 can be installed from adb/fastboot
Number 3 can also be installed via Rom Manager
Number 1 via app: Here
PHOENIX-9 said:
4ext wont mount my sd card in the recovery
its 100% working anywhere else
tried wipe cach / dalvik / data / boot
but nothing works..plz help!!
Click to expand...
Click to collapse
Change sd card
thekool11 said:
Well for the DHD/Inspire 4g the only 3 recoveries I know of are
1.4ext Recovery
2.TWRP Recovery
3. CWM (obviously)
numbers 2 & 3 can be installed from adb/fastboot
Number 3 can also be installed via Rom Manager
Number 1 via app: Here
Click to expand...
Click to collapse
could it be cuz my recovery is a TEST
im on 4ext touch 1.0.0.5 rc9 ??
herowy said:
Change sd card
Click to expand...
Click to collapse
already tried that
PHOENIX-9 said:
4ext wont mount my sd card in the recovery
its 100% working anywhere else
tried wipe cach / dalvik / data / boot
but nothing works..plz help!!
Click to expand...
Click to collapse
I had this problem about 3 days ago, and solved it with flashing another recovery.
#1: Download CWM from ARHD server.
#2: Extract recovery.img.
#3: Reboot into bootloader and flash it through fastboot. (I used Fastboot Commander but you don't have to. Flash as you like!)
#4: Reboot into recovery and tadahhh!
#5: Flash a ROM or restore a backup, and now flash 4eXT recovery again through the app.
And #6: Click my THANKS button
onlinsanity said:
I had this problem about 3 days ago, and solved it with flashing another recovery.
#1: Download CWM from ARHD server.
#2: Extract recovery.img.
#3: Reboot into bootloader and flash it through fastboot. (I used Fastboot Commander but you don't have to. Flash as you like!)
#4: Reboot into recovery and tadahhh!
#5: Flash a ROM or restore a backup, and now flash 4eXT recovery again through the app.
And #6: Click my THANKS button
Click to expand...
Click to collapse
Can you please help me with a link
im new here and i dont know a lot
Thanx
Get the 4ext updater app from the 4ext site. It will flash the updated recovery for you.
bananagranola said:
Get the 4ext updater app from the 4ext site. It will flash the updated recovery for you.
Click to expand...
Click to collapse
i downloaded the CWM 5.8.0.0 Touch Recovery
i used fastboot..and my recovery went back alive..but still with the 4EXT!
dont know how!
sorry for my bad English

[Q] After root no rom is working.

Hello
I have a GT-P5220 (ie. Galaxy Tab 3 LTE). I have rooted the tab using this procedure: http://forum.xda-developers.com/showthread.php?t=2642796
After that everytihng seemed ok. I flashed via TWRP tihs deodexed rom: http://forum.xda-developers.com/showthread.php?t=2624466. The tab boots up but i only get lots of FC messages and can't continue to use the tab. I tryed reflashing other roms, but with the same results all the time.
Can anyone help?
Thank you!
imprz said:
Hello
I have a GT-P5220 (ie. Galaxy Tab 3 LTE). I have rooted the tab using this procedure: http://forum.xda-developers.com/showthread.php?t=2642796
After that everytihng seemed ok. I flashed via TWRP tihs deodexed rom: http://forum.xda-developers.com/showthread.php?t=2624466. The tab boots up but i only get lots of FC messages and can't continue to use the tab. I tryed reflashing other roms, but with the same results all the time.
Can anyone help?
Thank you!
Click to expand...
Click to collapse
Download your stockversion from sammobile. and flash it with Odin.
Download CWM and the root.zip flash it with odin,so your tab are rooted.
Make an nandroid backup with the recovery.
so is sure that you can go back when you have probs.
bierma32 said:
Download your stockversion from sammobile. and flash it with Odin.
Download CWM and the root.zip flash it with odin,so your tab are rooted.
Make an nandroid backup with the recovery.
so is sure that you can go back when you have probs.
Click to expand...
Click to collapse
Thank you for your quick reply. I will try this asap. I allready flashed cwm before, but i can't see the zip files I copy too root. That's why I switched to TWRP. Any ideas how to see the .zip files in cwm?
imprz said:
Thank you for your quick reply. I will try this asap. I allready flashed cwm before, but i can't see the zip files I copy too root. That's why I switched to TWRP. Any ideas how to see the .zip files in cwm?
Click to expand...
Click to collapse
root the is wrong folder.
from recovery you can only go to your int. sdcard or ext, sdcard
bierma32 said:
root the is wrong folder.
from recovery you can only go to your int. sdcard or ext, sdcard
Click to expand...
Click to collapse
Sorry my bad. I meant in internal SD, but when I try to mount it in CWM says: E: Cant mount intsd or something similar.
Any ideas?
imprz said:
Sorry my bad. I meant in internal SD, but when I try to mount it in CWM says: E: Cant mount intsd or something similar.
Any ideas?
Click to expand...
Click to collapse
Please post a picture from your recovery.
This message mine are you have stockrecovery.
edit:
which recovery you have flashed?
bierma32 said:
Please post a picture from your recovery.
This message mine are you have stockrecovery.
edit:
which recovery you have flashed?
Click to expand...
Click to collapse
OK I'm back. Just flashed the stock firmware from sammobile, as you suggested. The tab is working now? Can you tell me wich version of cwm should i flash and where do I find the root.zip for my tab?
imprz said:
OK I'm back. Just flashed the stock firmware from sammobile, as you suggested. The tab is working now? Can you tell me wich version of cwm should i flash and where do I find the root.zip for my tab?
Click to expand...
Click to collapse
I'm not sure ,you have got the lte tab.
here are the link to the CWM thread http://forum.xda-developers.com/showthread.php?t=2432467&page=13
Important uncheck autoreboot by odin. After flash boot with the button combo into recovery snd flash the root.zip
Than make an backup of your rom.
bierma32 said:
I'm not sure ,you have got the lte tab.
here are the link to the CWM thread http://forum.xda-developers.com/showthread.php?t=2432467&page=13
Important uncheck autoreboot by odin. After flash boot with the button combo into recovery snd flash the root.zip
Than make an backup of your rom.
Click to expand...
Click to collapse
OK. I have flashed CWM and i can get into recovery. When i go to: choose zip from sdcard i get the following message: E: Can't mount /sdcard/
I have CWM-based recovery v6.0.2.8
Any clues on how to acces the root.zip from here?
imprz said:
OK. I have flashed CWM and i can get into recovery. When i go to: choose zip from sdcard i get the following message: E: Can't mount /sdcard/
I have CWM-based recovery v6.0.2.8
Any clues on how to acces the root.zip from here?
Click to expand...
Click to collapse
please post a picture ,so i can see the recovery
can you load it from ext. Sdcard ?
---------- Post added at 03:04 PM ---------- Previous post was at 02:44 PM ----------
imprz said:
OK. I have flashed CWM and i can get into recovery. When i go to: choose zip from sdcard i get the following message: E: Can't mount /sdcard/
I have CWM-based recovery v6.0.2.8
Any clues on how to acces the root.zip from here?
Click to expand...
Click to collapse
please post a picture ,so i can see the recovery , looks your recovery so ?
http://www.android-hilfe.de/attachm...t-accounts-uploadfromtaptalk1380439869871.jpg
bierma32 said:
please post a picture ,so i can see the recovery
can you load it from ext. Sdcard ?
---------- Post added at 03:04 PM ---------- Previous post was at 02:44 PM ----------
please post a picture ,so i can see the recovery , looks your recovery so ?
http://www.android-hilfe.de/attachm...t-accounts-uploadfromtaptalk1380439869871.jpg
Click to expand...
Click to collapse
No. My recovery is CWM now. But it says it can't mount sdcard.
I will later try using sideload and adb. Having a look into this now: http://forum.xda-developers.com/showthread.php?t=2559200
imprz said:
No. My recovery is CWM now. But it says it can't mount sdcard.
I will later try using sideload and adb. Having a look into this now: http://forum.xda-developers.com/showthread.php?t=2559200
Click to expand...
Click to collapse
Also comes this error,when your format of the ext.sdcard than other than fat32 and the size is more than 32gb
Format a sdcard to fat32 with size less 32gb, i found some post at CWM thread.
bierma32 said:
Also comes this error,when your format of the ext.sdcard than other than fat32 and the size is more than 32gb
Format a sdcard to fat32 with size less 32gb, i found some post at CWM thread.
Click to expand...
Click to collapse
I have no external sdcard inserted in the tab. I hoped i would be able to flash the files i copied on the tab.
I kinda have the same problem, Im going to follow this thread...
I may be late for dinner but here is how I flash roms on my 5210. If the rom is the OEM Stock Rom, I flash it from ODIN. This HAS to be done this way. There is no other way to flash OEM Stock Rom.
If I am going to flash something like Grievous or Pimpdroid or BinDroid, I will load the rom on to my internal memory Download folder. Then from TWRP I select install and it goes straight to the download folder. However, before I install any of these roms I will wipe the cache and dalvik cache. Is this wise? I don't know, I just do it because most of what I have read has indicated it should be done.
So if you are still having issues, reload from fresh the OEM Stock Rom for you device. Then reload your favorite Recovery (CWM or TWRP). Set up your device for the minimal way you want to use it. Now, from either CWM or TWRP (or whatever backup app you have) backup your device and save it to your PC. This way you can always go back to standard/stock.
From here you would load the Root.zip AND the rom you want to load on the internal download folder (note - if the rom is already rooted there is no need to load root.zip). Now go into recovery and install the root. Restart then shutdown. Note - you may have to update the SuperSU or Superuser app. Go back into recovery and install the rom.
This is how I have done it and it has worked for me. I am sure I have loaded and reloaded several times different roms. However, I always come back to the Stock ROM via backup restore. I haven't found a rom worth using.
This is how I do it. Your device may not react in the same way mine does. So I advise you on the side of caution that you could damage your device if you follow what I do. Not saying what I do is wrong, but it is how I go about loading and unloading different roms. The key for me is I use the backup/restore from TWRP. I find it to be very fast.
Good luck!
ps... if you have already done this and it did not work, my apologies for coming to party too late.
Thank you for your help. I allready tried this procedure. It all works well, the problem starts with the custom roms i try to install, They install fine but when they boot up I get various forceclose messages. Unusable.
I suspect the isue is with the roms. I have not yet found a working rom for GT-P5220.
Has anyone found some working rom for this specific device?

[HELP] Unbrick HTC One X

Hey guys,
I need help unbricking my HTC One X. I was trying to set up CM11 on it but I used CWM Recovery 5.0.8 instead of 6.0.4 that it requires. I managed to remove the stock OS and now it only loads bootloader or cwm recovery.
I downloaded the stock ROM and I'm now trying to install that via recovery. This is what I've been trying to send the file to the HOX -
I've been trying to use ADB to transfer files to the device but the device can't be found (List of devices shows up blank). However, it shows up in fastboot.
I tried connecting a USB OTG to it but I can't seem to find any option to install from external USB. I tried to mount USB but it gives me an error - E:Unable to open ums lunfile.
I tried running an RUU but that didn't work either.
I'm thinking that once I can see the stock ROM file through CWM recovery, it should be easy enough to install that. So what should I be doing to get the file onto the HOX or what other approach can I use?
Will help me out a lot!
Thanks!
ankeetguha said:
Hey guys,
I need help unbricking my HTC One X. I was trying to set up CM11 on it but I used CWM Recovery 5.0.8 instead of 6.0.4 that it requires. I managed to remove the stock OS and now it only loads bootloader or cwm recovery.
I downloaded the stock ROM and I'm now trying to install that via recovery. This is what I've been trying to send the file to the HOX -
I've been trying to use ADB to transfer files to the device but the device can't be found (List of devices shows up blank). However, it shows up in fastboot.
I tried connecting a USB OTG to it but I can't seem to find any option to install from external USB. I tried to mount USB but it gives me an error - E:Unable to open ums lunfile.
I tried running an RUU but that didn't work either.
I'm thinking that once I can see the stock ROM file through CWM recovery, it should be easy enough to install that. So what should I be doing to get the file onto the HOX or what other approach can I use?
Will help me out a lot!
Thanks!
Click to expand...
Click to collapse
Flash Philz 5.15.9 recovery after this go in recovery mount sd card and copy what you need to your sd card and inastall what you want. And if you want to install CMM11 copy the files to your sd card and after this flash CWM 6.0.4.8 and install CM11
Thant said:
Flash Philz 5.15.9 recovery after this go in recovery mount sd card and copy what you need to your sd card and inastall what you want. And if you want to install CMM11 copy the files to your sd card and after this flash CWM 6.0.4.8 and install CM11
Click to expand...
Click to collapse
Thanks a ton! I managed to flash CWM 6.0.4.8 on it and then I installed CM11 and then the GAPPS. The installation went through fine and I can finally see the CM load screen. However, I think I'm stuck in some sort of bootloop since it doesn't seem to get past the loading screen.
Any ideas on how to fix this? Things are looking up!
ankeetguha said:
Thanks a ton! I managed to flash CWM 6.0.4.8 on it and then I installed CM11 and then the GAPPS. The installation went through fine and I can finally see the CM load screen. However, I think I'm stuck in some sort of bootloop since it doesn't seem to get past the loading screen.
Any ideas on how to fix this? Things are looking up!
Click to expand...
Click to collapse
Did you flash the boot .img from fastboot
paulh1978 said:
Did you flash the boot .img from fastboot
Click to expand...
Click to collapse
Oh man that's what I missed! Thanks so much, was working on this for hours.
Incredible
ankeetguha said:
Oh man that's what I missed! Thanks so much, was working on this for hours.
Incredible
Click to expand...
Click to collapse
No worries have fun.

[Q] Cant write to internal sd after reinstall of UCUFNJ1_Rooted

I did a reinstall of UCUFNJ1_Rooted from extsd didnt work so i did the cache,dalvik, system wipe again and rebooted recovery twrp 2.8.6.0 and let it install supersu and put the UCUFNJ1_Rooted file back onto internal through mtp installed alright but for some reason i cannot create any folders or files on internal sd card i tryed the sdcard fix app but it didnt work. How can i fix this? Please HELP!
winlin.droidrzr said:
I did a reinstall of UCUFNJ1_Rooted from extsd didnt work so i did the cache,dalvik, system wipe again and rebooted recovery twrp 2.8.6.0 and let it install supersu and put the UCUFNJ1_Rooted file back onto internal through mtp installed alright but for some reason i cannot create any folders or files on internal sd card i tryed the sdcard fix app but it didnt work. How can i fix this? Please HELP!
Click to expand...
Click to collapse
Maybe give fix permissions a try in twrp. it's in the advanced menu.
jason2678 said:
Maybe give fix permissions a try in twrp. it's in the advanced menu.
Click to expand...
Click to collapse
I tryed that no luck. I flashed cm12.1 seems to be able to write to both internal and external so i decided to re wipe internal sd, data, cache,dalvik and try to flash UCUFNJ1 again but sticks at att symbol with blue blinking led.
winlin.droidrzr said:
I tryed that no luck. I flashed cm12.1 seems to be able to write to both internal and external so i decided to re wipe internal sd, data, cache,dalvik and try to flash UCUFNJ1 again but sticks at att symbol with blue blinking led.
Click to expand...
Click to collapse
Did you do format data under advanced wipe, the one where you have to type yes? That one is pretty good for solving aosp to touchwiz problems.
jason2678 said:
Did you do format data under advanced wipe, the one where you have to type yes? That one is pretty good for solving aosp to touchwiz problems.
Click to expand...
Click to collapse
Sure did i did a reboot to recovery after and copied the UCUFNJ1_Rooted zip file back onto the internal sd still same thing its at still at&t symbol with blue blinking led.
md5 of the file checks out
winlin.droidrzr said:
Sure did i did a reboot to recovery after and copied the UCUFNJ1_Rooted zip file back onto the internal sd still same thing its at still at&t symbol with blue blinking led.
Click to expand...
Click to collapse
If no one hops in with any better ideas here maybe look around the s3rx or tm ROM development threads here. You're not the first person to have this problem, but I thought they solved it by formatting internal sd and flashing a stock ROM first.
If you want something else to try, maybe flash philz touch for recovery wipe and flash with it.
jason2678 said:
If no one hops in with any better ideas here maybe look around the s3rx or tm ROM development threads here. You're not the first person to have this problem, but I thought they solved it by formatting internal sd and flashing a stock ROM first.
If you want something else to try, maybe flash philz touch for recovery wipe and flash with it.
Click to expand...
Click to collapse
Trying s3rx flashed okay but its just at the startup screen with flying dots nothing else is happening.
winlin.droidrzr said:
Trying s3rx flashed okay but its just at the startup screen with flying dots nothing else is happening.
Click to expand...
Click to collapse
There should be some discussion in that s3rx thread of people having the same problem, touchwiz won't boot after running aosp. Take a look through the more recent posts or do some searching there. Someone might have posted a fix. This problem isn't really uncommon.
Cant find the latest philz touch recovery for the I747.
winlin.droidrzr said:
Trying s3rx flashed okay but its just at the startup screen with flying dots nothing else is happening.
Click to expand...
Click to collapse
Did you give philz touch recovery a try? There's a point of view here that it wipes a little better than twrp.
---------- Post added at 05:07 PM ---------- Previous post was at 05:00 PM ----------
winlin.droidrzr said:
Cant find the latest philz touch recovery for the I747.
Click to expand...
Click to collapse
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
jason2678 said:
Did you give philz touch recovery a try? There's a point of view here that it wipes a little better than twrp.
---------- Post added at 05:07 PM ---------- Previous post was at 05:00 PM ----------
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
Click to expand...
Click to collapse
Thank You!
Can i flash this in twrp or do i need to use odin?
winlin.droidrzr said:
Thank You!
Can i flash this in twrp or do i need to use odin?
Click to expand...
Click to collapse
The zips look like they're made to be flashed in custom recovery.
jason2678 said:
The zips look like they're made to be flashed in custom recovery.
Click to expand...
Click to collapse
I got philz on there and S3Rx on external but i get a status 7 error i tryed adb push it to /sdcard but its not showing up there and it copied successfully.
I think i got it /sdcard not there it needs to be /data lol
winlin.droidrzr said:
I think i got it /sdcard not there it needs to be /data lol
Click to expand...
Click to collapse
Internal sdcard might be at /data/media/0. I haven't used philz much myself. I think you can go into Mount -> USB storage to get it to mount as a USB device if you need to. It's not automatic like on twrp.
After full wipes and format of data, flash the NJ1 bootloader/modem and then the ROM. I had to do that on mine and it worked
winlin.droidrzr said:
I think i got it /sdcard not there it needs to be /data lol
Click to expand...
Click to collapse
The boot loader and modem thing is a great point. I should have asked you that to begin with, but unless you are absolutely certain you were on ne4 or nj1 boot loader before, do not just find the nj1 boot loader and modem on the forum and flash it or you could hard brick.
Safest way to proceed would be to load aroma file manager on your external sd card. Flash it in recovery then open up a terminal from it. In the terminal enter
Code:
getprop ro.bootloader
That will output your boot loader.
jason2678 said:
The boot loader and modem thing is a great point. I should have asked you that to begin with, but unless you are absolutely certain you were on ne4 or nj1 boot loader before, do not just find the nj1 boot loader and modem on the forum and flash it or you could hard brick.
Safest way to proceed would be to load aroma file manager on your external sd card. Flash it in recovery then open up a terminal from it. In the terminal enter
Code:
getprop ro.bootloader
That will output your boot loader.
Click to expand...
Click to collapse
Thanks its working now!! its the recovery twrp it wasnt working philz is working i got the adb push to work by pushing it to /data/media/0
winlin.droidrzr said:
Thanks its working now!! its the recovery twrp it wasnt working philz is working i got the adb push to work by pushing it to /data/media/0
Click to expand...
Click to collapse
Great. Glad it's working for you.
So it wouldn't boot after wiping with twrp and had to be wiped with philz. Did you get it to flash with philz or did you have to go back to twrp to flash it? Just want to be sure I understand. :highfive:

[Q] please help me

i am new in this thing and i want to solve this problem any one have the solutiion please give it to me in details
i have htc one x i can not reach for home screen i stuck at boot screen and i dont know what to do please help me. thanks
the problem like in the photo at attach files
any one help me please
engsalama said:
any one help me please
Click to expand...
Click to collapse
Charge it with script from fastboot you can find the script with search function
Thant said:
Charge it with script from fastboot you can find the script with search function
Click to expand...
Click to collapse
i charge it but what i do next ? the phone not open
engsalama said:
i charge it but what i do next ? the phone not open
Click to expand...
Click to collapse
go in bootloader unlock it via htcdev.com then flash custom recovery Philz 5.15.9 then copy your custom rom to the sd card then install it and last flash the boot.img from rom archive. And be careful every rom have different recovery. For sense 5 use Philz 5.15.9 for CM11 TWRP2.8.0 and for CM 12 use TWRP 2.8.5 or something like that read the OP on the rom and you will see wich recovery you need
Thant said:
go in bootloader unlock it via htcdev.com then flash custom recovery Philz 5.15.9 then copy your custom rom to the sd card then install it and last flash the boot.img from rom archive. And be careful every rom have different recovery. For sense 5 use Philz 5.15.9 for CM11 TWRP2.8.0 and for CM 12 use TWRP 2.8.5 or something like that read the OP on the rom and you will see wich recovery you need
Click to expand...
Click to collapse
thanks a lot but can you gave me a link for any thing like a video that have problem like this i am new in this thanks again

Categories

Resources