Develop Bugs

[Q] Stuck on Android Logo

Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.

pranjaldixit said:
Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
Click to expand...
Click to collapse
Before installing make backup wipe dalvik cache , cache, do factory reset and try again .. hope it helps
Sent from my Hero using xda premium

Actually I tell the whole story now. When I was making backup of my stock ROM the sd card showed low on space. So I removed that SD card and inserted the one which came with the Phone. On that I installed all the required zip files. Then I made backup of the stock ROM and the data. After that I followed these steps mentioned here -:
http://forum.xda-developers.com/showthread.php?t=1863260
According to the steps I did not did wipe davik cache etc. after instaling the ROM I did wipe factory and data reset and wipe cache partition. After following all the steps mentioned I rebooted my phone as mentioned. But after rebooting the phone is stuck on android logo. I then again went into recovery and tried to wipe dalvik cache the confirmation page that appears before wiping anything is not coming. Also when I tried to restore my phone to the stock ROM an error message is coming. So I am not able to restore to the stock ROM. This is the whole thing. So guys please help. I hope I have not bricked my phone. Any solutions?
Thanks

As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2

AiphNday said:
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Mate I used latest version of ClockWork Mod to install the ROM.

pranjaldixit said:
Mate I used latest version of ClockWork Mod to install the ROM.
Click to expand...
Click to collapse
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2

AiphNday said:
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.

pranjaldixit said:
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
Click to expand...
Click to collapse
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2

AiphNday said:
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.

pranjaldixit said:
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
Click to expand...
Click to collapse
I suggest that you flash your phone to stock rom again via odin..
Then change your recovery,i was preffered px-cwmV2,but i dont know is the link still alive or not..
Flash the recovery,reboot..
Then enter recovery mode again,install rom..
Sent from my GT-S5660 using Tapatalk 2

How to do flash stock ROM as the backup that I made is not working properly.

pranjaldixit said:
How to do flash stock ROM as the backup that I made is not working properly.
Click to expand...
Click to collapse
With odin,
Search ! there are allot of guide howto flash gio to stock with odin
Sent from my HTC Hero using xda app-developers app

If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.

phreak_or said:
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
Click to expand...
Click to collapse
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.

pranjaldixit said:
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
Click to expand...
Click to collapse
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!

phreak_or said:
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
Click to expand...
Click to collapse
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks

pranjaldixit said:
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
Click to expand...
Click to collapse
yes

And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks

pranjaldixit said:
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
Click to expand...
Click to collapse
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed

voetbalremco said:
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
Click to expand...
Click to collapse
I am not installing firmware right now. I am just wanting to install CWM v2 and try whether it is able to install MIUI successfully or not. If this one also fails then I will install the firmwares via odin. Hope you ate able to understand what I am saying. Please help.

JB-MR1 Help!

Hi all, I was on AKOP's milestone ROM before trying to flash their newest one. I did not do anything to the kernel or anything by the way.
I'm using ClockworkMod Recovery v6.0.2.7 and I rebooted into recovery and flashed super dark side wipe and then JB-MR1 and then gapps.
I went through the entire start up process with inputting your information and then finally I got into the actual home screen. I clicked around to see how the UI looked and then decided to reboot through the menu.
It was in the rebooting animation icon for at least 30 min before I decided to pull the battery. I want to wipe and start again but my cwm recovery isn't installing anything.
EDIT: The phone still works as I can boot into the phone and use it. I'm trying to reboot now: power button hold>reboot, but its taking ages still...need help on this reboot thanks
Any help here?
EDIT 2: Pretty much phone is "functional" but any method of trying to reboot or reboot into recovery fails
Thanks all!

Check the Md5 hash to make sure it is a good download.
Otherwise it sounds like it is CWM that can be causing issues.
Which version of gapps are you flashing?

8Fishes said:
Check the Md5 hash to make sure it is a good download.
Otherwise it sounds like it is CWM that can be causing issues.
Which version of gapps are you flashing?
Click to expand...
Click to collapse
Checked the Md5 with an app and it matches up perfectly with akop's main website.
I'm running 6.0.2.8 cwm. Is it even possible that its cwm? I used the same version to flash AKOPs new ROM.
and im flashing gapps-jb-20121212-signed.zip
Does it have anything to do with my kernel?

You aren't supposed to use super wipe with cwm 6. That is probably your problem.

meekrawb said:
You aren't supposed to use super wipe with cwm 6. That is probably your problem.
Click to expand...
Click to collapse
Thanks so much for pinpointing the problem! Is there a fix to this?
And is this the recommended method of flashing? (Taken from http://forum.xda-developers.com/showthread.php?t=1926754):
1. Wipe factory data/reset
2. Wipe cache
3. Go into mounts and storage
4. Format /system
5. Format /data
6. Format /cache
7. Enter advanced
8. Wipe dalvik
9. Flash ROM then gapps
10. Reboot and let the ROM settle for 5-10 minutes if flashing TW ROMs, this step is unnecessary for AOSP based ROMs.
11. (Optional) if flashing a new radio flash AFTER the ROM has been initially booted for the first time. No wipes are necessary when flashing a new radio but it HAS to be flashed after the ROM is loaded and settled in. Flashing a radio first and then a ROM has caused issues like the phone not even recognizing there is a network for it. ( phone remains in emergency mode )
Edit:
Pretty sure my phone is bricked now... in a continuous boot up loop... BUT i can still access recovery

Ostyrion said:
Thanks so much for pinpointing the problem! Is there a fix to this?
Edit:
Pretty sure my phone is bricked now... in a continuous boot up loop... BUT i can still access recovery
Click to expand...
Click to collapse
Yes, those are the proper flashing instructions for CWM6.
It sounds like you have a soft brick. I think your best bet is to Odin back to stock. Have a look here:
http://forum.xda-developers.com/showthread.php?t=1858435
Good luck.

meekrawb said:
Yes, those are the proper flashing instructions for CWM6.
It sounds like you have a soft brick. I think your best bet is to Odin back to stock. Have a look here:
http://forum.xda-developers.com/showthread.php?t=1858435
Good luck.
Click to expand...
Click to collapse
You sir are a saving grace!
I'll try this at once!!
I have 2 questions though.
1. in regard to kernels. Do i need to do anything (aka change my kernel?) Or is the stock kernel suitable for 4.2.1?
2. If i cant boot into my phone to get to my SD card, how do i download and put files onto my phone?

Ostyrion said:
You sir are a saving grace!
I'll try this at once!!
I have 2 questions though.
1. in regard to kernels. Do i need to do anything (aka change my kernel?) Or is the stock kernel suitable for 4.2.1?
2. If i cant boot into my phone to get to my SD card, how do i download and put files onto my phone?
Click to expand...
Click to collapse
Stock kernel is just fine.
Odin will flash the stock OS to your phone from the computer. Make sure to read the Odin directions a few times before trying it because it could hard brick if something goes wrong.

meekrawb said:
Stock kernel is just fine.
Odin will flash the stock OS to your phone from the computer. Make sure to read the Odin directions a few times before trying it because it could hard brick if something goes wrong.
Click to expand...
Click to collapse
I'm trying to read through the thread you gave me but its kinda cluttered and its hard finding exactly where to start...pointers?

From the first post of that thread you will need
1. The prerequisites
-Odin
-Drivers
-Kies(dunno if this is mandatory but I guess it couldn't hurt.)
2. T-Mobile t989 uvlhi stock ROM(Odin)
You will need some type of zip software to extract the files from this.
3. Follow the steps under Installation - Odin installation(skip step 1)
After you get the stock ROM running you can install custom recovery and then flash your custom ROMs.

meekrawb said:
From the first post of that thread you will need
1. The prerequisites
-Odin
-Drivers
-Kies(dunno if this is mandatory but I guess it couldn't hurt.)
2. T-Mobile t989 uvlhi stock ROM(Odin)
You will need some type of zip software to extract the files from this.
3. Follow the steps under Installation - Odin installation(skip step 1)
After you get the stock ROM running you can install custom recovery and then flash your custom ROMs.
Click to expand...
Click to collapse
IT WORKS!!!! I LOVE YOU!! THANK YOU SO SO SO SO SO MUCH!!
THANK YOU THANK YOU THANK YOU!!
So now that I'm back on stock ROM, is my phone still rooted? Or do i need to reroot?
Edit: Downloaded a root checker. Looks like I need to reroot. Thank you again SOOOOO much!!!

Ostyrion said:
IT WORKS!!!! I LOVE YOU!! THANK YOU SO SO SO SO SO MUCH!!
THANK YOU THANK YOU THANK YOU!!
So now that I'm back on stock ROM, is my phone still rooted? Or do i need to reroot?
Click to expand...
Click to collapse
You are welcome. You are now unrooted so you have to download the recovery of your choice to the internal SD card and flash it from the stock recovery. After you reboot back into recovery you can flash a ROM and you will be rooted.

meekrawb said:
You are welcome. You are now unrooted so you have to download the recovery of your choice to the internal SD card and flash it from the stock recovery. After you reboot back into recovery you can flash a ROM and you will be rooted.
Click to expand...
Click to collapse
So in essence, once i have cwm/twrp on my phone, i have "root"?
Just to check:
1. download cwm recovery
2. via usb put onto phone.
3. reboot into recovery
4. flash cwm
5. restart phone
6. copy AOKP ROM onto phone
7. reboot into recovery
8. flash AOKP ROM?
Again, i cant thank you enough!

Ostyrion said:
So in essence, once i have cwm/twrp on my phone, i have "root"?
Just to check:
1. download cwm recovery
2. via usb put onto phone.
3. reboot into recovery
4. flash cwm
5. restart phone
6. copy AOKP ROM onto phone
7. reboot into recovery
8. flash AOKP ROM?
Again, i cant thank you enough!
Click to expand...
Click to collapse
That should do it. You won't be rooted until you install a custom ROM though(they come already rooted).

meekrawb said:
That should do it. You won't be rooted until you install a custom ROM though(they come already rooted).
Click to expand...
Click to collapse
Apparently stock recovery doesn't allow to install via internal SD card so I need odin to flash cwm dont i?
What boxes do i need checked besides the PDA checkbox?

Ostyrion said:
Apparently stock recovery doesn't allow to install via internal SD card so I need odin to flash cwm dont i?
What boxes do i need checked besides the PDA checkbox?
Click to expand...
Click to collapse
If you download the flashable zip from the first post here:
http://forum.xda-developers.com/showthread.php?p=30497342
you should be able to flash it from stock recovery. If it doesn't work I will have to look up how to install it with Odin.

meekrawb said:
If you download the flashable zip from the first post here:
http://forum.xda-developers.com/showthread.php?p=30497342
you should be able to flash it from stock recovery. If it doesn't work I will have to look up how to install it with Odin.
Click to expand...
Click to collapse
I actually got cwm 5.0.2.7 on my phone through odin. I just need root now to upgrade it to the most recent version.
I've been seeing busybox paired with superuser.
Do i need busybox? Or can i just flash superuser through cwm recovery 5.0.2.7?

Ostyrion said:
I actually got cwm 5.0.2.7 on my phone through odin. I just need root now to upgrade it to the most recent version.
I've been seeing busybox paired with superuser.
Do i need busybox? Or can i just flash superuser through cwm recovery 5.0.2.7?
Click to expand...
Click to collapse
Why do you need root? You should be able to just flash the newer cwm zip.

Here is a superuser zip that I used successfully on my t989:

meekrawb said:
Here is a superuser zip that I used successfully on my t989:
Click to expand...
Click to collapse
Thanks for the file!
I downloaded cwm from this site:
http://www.clockworkmod.com/rommanager
but it comes as an img file...and I dont seem to be able to flash that from recovery

[Q] After root no rom is working.

Hello
I have a GT-P5220 (ie. Galaxy Tab 3 LTE). I have rooted the tab using this procedure: http://forum.xda-developers.com/showthread.php?t=2642796
After that everytihng seemed ok. I flashed via TWRP tihs deodexed rom: http://forum.xda-developers.com/showthread.php?t=2624466. The tab boots up but i only get lots of FC messages and can't continue to use the tab. I tryed reflashing other roms, but with the same results all the time.
Can anyone help?
Thank you!

imprz said:
Hello
I have a GT-P5220 (ie. Galaxy Tab 3 LTE). I have rooted the tab using this procedure: http://forum.xda-developers.com/showthread.php?t=2642796
After that everytihng seemed ok. I flashed via TWRP tihs deodexed rom: http://forum.xda-developers.com/showthread.php?t=2624466. The tab boots up but i only get lots of FC messages and can't continue to use the tab. I tryed reflashing other roms, but with the same results all the time.
Can anyone help?
Thank you!
Click to expand...
Click to collapse
Download your stockversion from sammobile. and flash it with Odin.
Download CWM and the root.zip flash it with odin,so your tab are rooted.
Make an nandroid backup with the recovery.
so is sure that you can go back when you have probs.

bierma32 said:
Download your stockversion from sammobile. and flash it with Odin.
Download CWM and the root.zip flash it with odin,so your tab are rooted.
Make an nandroid backup with the recovery.
so is sure that you can go back when you have probs.
Click to expand...
Click to collapse
Thank you for your quick reply. I will try this asap. I allready flashed cwm before, but i can't see the zip files I copy too root. That's why I switched to TWRP. Any ideas how to see the .zip files in cwm?

imprz said:
Thank you for your quick reply. I will try this asap. I allready flashed cwm before, but i can't see the zip files I copy too root. That's why I switched to TWRP. Any ideas how to see the .zip files in cwm?
Click to expand...
Click to collapse
root the is wrong folder.
from recovery you can only go to your int. sdcard or ext, sdcard

bierma32 said:
root the is wrong folder.
from recovery you can only go to your int. sdcard or ext, sdcard
Click to expand...
Click to collapse
Sorry my bad. I meant in internal SD, but when I try to mount it in CWM says: E: Cant mount intsd or something similar.
Any ideas?

imprz said:
Sorry my bad. I meant in internal SD, but when I try to mount it in CWM says: E: Cant mount intsd or something similar.
Any ideas?
Click to expand...
Click to collapse
Please post a picture from your recovery.
This message mine are you have stockrecovery.
edit:
which recovery you have flashed?

bierma32 said:
Please post a picture from your recovery.
This message mine are you have stockrecovery.
edit:
which recovery you have flashed?
Click to expand...
Click to collapse
OK I'm back. Just flashed the stock firmware from sammobile, as you suggested. The tab is working now? Can you tell me wich version of cwm should i flash and where do I find the root.zip for my tab?

imprz said:
OK I'm back. Just flashed the stock firmware from sammobile, as you suggested. The tab is working now? Can you tell me wich version of cwm should i flash and where do I find the root.zip for my tab?
Click to expand...
Click to collapse
I'm not sure ,you have got the lte tab.
here are the link to the CWM thread http://forum.xda-developers.com/showthread.php?t=2432467&page=13
Important uncheck autoreboot by odin. After flash boot with the button combo into recovery snd flash the root.zip
Than make an backup of your rom.

bierma32 said:
I'm not sure ,you have got the lte tab.
here are the link to the CWM thread http://forum.xda-developers.com/showthread.php?t=2432467&page=13
Important uncheck autoreboot by odin. After flash boot with the button combo into recovery snd flash the root.zip
Than make an backup of your rom.
Click to expand...
Click to collapse
OK. I have flashed CWM and i can get into recovery. When i go to: choose zip from sdcard i get the following message: E: Can't mount /sdcard/
I have CWM-based recovery v6.0.2.8
Any clues on how to acces the root.zip from here?

imprz said:
OK. I have flashed CWM and i can get into recovery. When i go to: choose zip from sdcard i get the following message: E: Can't mount /sdcard/
I have CWM-based recovery v6.0.2.8
Any clues on how to acces the root.zip from here?
Click to expand...
Click to collapse
please post a picture ,so i can see the recovery
can you load it from ext. Sdcard ?
---------- Post added at 03:04 PM ---------- Previous post was at 02:44 PM ----------
imprz said:
OK. I have flashed CWM and i can get into recovery. When i go to: choose zip from sdcard i get the following message: E: Can't mount /sdcard/
I have CWM-based recovery v6.0.2.8
Any clues on how to acces the root.zip from here?
Click to expand...
Click to collapse
please post a picture ,so i can see the recovery , looks your recovery so ?
http://www.android-hilfe.de/attachm...t-accounts-uploadfromtaptalk1380439869871.jpg

bierma32 said:
please post a picture ,so i can see the recovery
can you load it from ext. Sdcard ?
---------- Post added at 03:04 PM ---------- Previous post was at 02:44 PM ----------
please post a picture ,so i can see the recovery , looks your recovery so ?
http://www.android-hilfe.de/attachm...t-accounts-uploadfromtaptalk1380439869871.jpg
Click to expand...
Click to collapse
No. My recovery is CWM now. But it says it can't mount sdcard.
I will later try using sideload and adb. Having a look into this now: http://forum.xda-developers.com/showthread.php?t=2559200

imprz said:
No. My recovery is CWM now. But it says it can't mount sdcard.
I will later try using sideload and adb. Having a look into this now: http://forum.xda-developers.com/showthread.php?t=2559200
Click to expand...
Click to collapse
Also comes this error,when your format of the ext.sdcard than other than fat32 and the size is more than 32gb
Format a sdcard to fat32 with size less 32gb, i found some post at CWM thread.

bierma32 said:
Also comes this error,when your format of the ext.sdcard than other than fat32 and the size is more than 32gb
Format a sdcard to fat32 with size less 32gb, i found some post at CWM thread.
Click to expand...
Click to collapse
I have no external sdcard inserted in the tab. I hoped i would be able to flash the files i copied on the tab.

I kinda have the same problem, Im going to follow this thread...

I may be late for dinner but here is how I flash roms on my 5210. If the rom is the OEM Stock Rom, I flash it from ODIN. This HAS to be done this way. There is no other way to flash OEM Stock Rom.
If I am going to flash something like Grievous or Pimpdroid or BinDroid, I will load the rom on to my internal memory Download folder. Then from TWRP I select install and it goes straight to the download folder. However, before I install any of these roms I will wipe the cache and dalvik cache. Is this wise? I don't know, I just do it because most of what I have read has indicated it should be done.
So if you are still having issues, reload from fresh the OEM Stock Rom for you device. Then reload your favorite Recovery (CWM or TWRP). Set up your device for the minimal way you want to use it. Now, from either CWM or TWRP (or whatever backup app you have) backup your device and save it to your PC. This way you can always go back to standard/stock.
From here you would load the Root.zip AND the rom you want to load on the internal download folder (note - if the rom is already rooted there is no need to load root.zip). Now go into recovery and install the root. Restart then shutdown. Note - you may have to update the SuperSU or Superuser app. Go back into recovery and install the rom.
This is how I have done it and it has worked for me. I am sure I have loaded and reloaded several times different roms. However, I always come back to the Stock ROM via backup restore. I haven't found a rom worth using.
This is how I do it. Your device may not react in the same way mine does. So I advise you on the side of caution that you could damage your device if you follow what I do. Not saying what I do is wrong, but it is how I go about loading and unloading different roms. The key for me is I use the backup/restore from TWRP. I find it to be very fast.
Good luck!
ps... if you have already done this and it did not work, my apologies for coming to party too late.

Thank you for your help. I allready tried this procedure. It all works well, the problem starts with the custom roms i try to install, They install fine but when they boot up I get various forceclose messages. Unusable.
I suspect the isue is with the roms. I have not yet found a working rom for GT-P5220.
Has anyone found some working rom for this specific device?

CWM 6.0.4.8 Mounting storage not work

Title says everything I cant get get to phone storage when I mount USB storage, i installed latest version of CWM 6.0.4.8.

Or try to update the drivers, or flash philz 5.15. Mount the sdcard and wait literally minutes to let it pop up.

I've found this problem too.
I've tried to use CWM 6.0.4.8, TWRP 2.7.1.0 (Unofficial), Philz 6.19.3.
It doesn't have any recovery can mount USB storage. :crying:

Tokemon said:
I've found this problem too.
I've tried to use CWM 6.0.4.8, TWRP 2.7.1.0 (Unofficial), Philz 6.19.3.
It doesn't have any recovery can mount USB storage. :crying:
Click to expand...
Click to collapse
Flash Philz 5.15.9 after this copy what you need and after this flash again latest TWRP CWM or Philz

Thant said:
Flash Philz 5.15.9 after this copy what you need and after this flash again latest TWRP CWM or Philz
Click to expand...
Click to collapse
Now, I work with your step every time that I flash rom. But I need to know how can I fixed or something better?

Tokemon said:
Now, I work with your step every time that I flash rom. But I need to know how can I fixed or something better?
Click to expand...
Click to collapse
Can't you copy the ROM.zip through Android system? How long did you have patience to wait for sd card to show in your pc explorer?

Tokemon said:
Now, I work with your step every time that I flash rom. But I need to know how can I fixed or something better?
Click to expand...
Click to collapse
Yes like @[email protected]|-|oR say before flash new rom use the old rom to copy files to your sd card my way is if you dont have working rom and is for critical moments:silly:

[email protected]|-|oR said:
Can't you copy the ROM.zip through Android system? How long did you have patience to wait for sd card to show in your pc explorer?
Click to expand...
Click to collapse
I just found it after try to flash recovery that newer than CWM 5.8.4.0
Thant said:
Yes like @[email protected]|-|oR say before flash new rom use the old rom to copy files to your sd card my way is if you dont have working rom and is for critical moments:silly:
Click to expand...
Click to collapse
Thank so much

[Q] Cant flash rom in my Device

I dont know whats wrong with my device
I cant flash any rom in my device
TWRP error "unable to mount system"
"Unable to Mount Data" etc.
Plz help me to resolve this.
Done now flashed fastboot ROM and its done.

If u have pc then install cwm recovery using fastboot then install any rom it will work definitely
Sent from my HM 1SW using XDA Premium 4 mobile app

Recovery issue
farooque7508 said:
I dont know whats wrong with my device
I cant flash any rom in my device
TWRP error "unable to mount system"
"Unable to Mount Data" etc.
Plz help me to resolve this.
Click to expand...
Click to collapse
problem with ur recovery try latest one or change ur recovery .
have u created Backup successfully with this recovery ?

Not Done
kumarsujitroy said:
problem with ur recovery try latest one or change ur recovery .
have u created Backup successfully with this recovery ?
Click to expand...
Click to collapse
Tried all the things but problem still there..

farooque7508 said:
Tried all the things but problem still there..
Click to expand...
Click to collapse
try ro flash miui rom with fastboot (wipe everything) and then try to install again twrp

farooque7508 said:
Tried all the things but problem still there..
Click to expand...
Click to collapse
Same happened with me, too. Try flashing philz recovery, that works well in flashing roms. And if you wanna stick to twrp, then from recovery menu, first wipe everything and then again reboot to recovery. Then flash the desired rom. It should work. :good:
And yea, this is a minor problem. You don't need to flash fastboot rom. Just do as i said or switch to philz revovery.