Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
pranjaldixit said:
Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
Click to expand...
Click to collapse
Before installing make backup wipe dalvik cache , cache, do factory reset and try again .. hope it helps
Sent from my Hero using xda premium
Actually I tell the whole story now. When I was making backup of my stock ROM the sd card showed low on space. So I removed that SD card and inserted the one which came with the Phone. On that I installed all the required zip files. Then I made backup of the stock ROM and the data. After that I followed these steps mentioned here -:
http://forum.xda-developers.com/showthread.php?t=1863260
According to the steps I did not did wipe davik cache etc. after instaling the ROM I did wipe factory and data reset and wipe cache partition. After following all the steps mentioned I rebooted my phone as mentioned. But after rebooting the phone is stuck on android logo. I then again went into recovery and tried to wipe dalvik cache the confirmation page that appears before wiping anything is not coming. Also when I tried to restore my phone to the stock ROM an error message is coming. So I am not able to restore to the stock ROM. This is the whole thing. So guys please help. I hope I have not bricked my phone. Any solutions?
Thanks
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Mate I used latest version of ClockWork Mod to install the ROM.
pranjaldixit said:
Mate I used latest version of ClockWork Mod to install the ROM.
Click to expand...
Click to collapse
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
pranjaldixit said:
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
Click to expand...
Click to collapse
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
pranjaldixit said:
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
Click to expand...
Click to collapse
I suggest that you flash your phone to stock rom again via odin..
Then change your recovery,i was preffered px-cwmV2,but i dont know is the link still alive or not..
Flash the recovery,reboot..
Then enter recovery mode again,install rom..
Sent from my GT-S5660 using Tapatalk 2
How to do flash stock ROM as the backup that I made is not working properly.
pranjaldixit said:
How to do flash stock ROM as the backup that I made is not working properly.
Click to expand...
Click to collapse
With odin,
Search ! there are allot of guide howto flash gio to stock with odin
Sent from my HTC Hero using xda app-developers app
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
phreak_or said:
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
Click to expand...
Click to collapse
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
pranjaldixit said:
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
Click to expand...
Click to collapse
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
phreak_or said:
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
Click to expand...
Click to collapse
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
pranjaldixit said:
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
Click to expand...
Click to collapse
yes
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
pranjaldixit said:
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
Click to expand...
Click to collapse
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
voetbalremco said:
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
Click to expand...
Click to collapse
I am not installing firmware right now. I am just wanting to install CWM v2 and try whether it is able to install MIUI successfully or not. If this one also fails then I will install the firmwares via odin. Hope you ate able to understand what I am saying. Please help.
Related
hey guys
i am not able to install custom rom .zip via CWM i don't get any error while installing, it shows "Installation complete" but later on its stuck at galaxy y logo
the other features like backup,format,etc are working fine and i am able to install .zips via stock recovery but cmw isn't working for me
PS
i was able to use cwm before to flash roms
using skins cwm
which rom were you flashing...
Sent from my GT-S5360 using Tapatalk 2
having this problem with all roms
btw
my cwm.zip size is 1.31mb
Try cwm by mad team
Do a data/cache wipe
Then again check... flashing the rom
Sent from my GT-S5360 using Tapatalk 2
dranzer006 said:
hey guys
i am not able to install custom rom .zip via CWM i don't get any error while installing, it shows "Installation complete" but later on its stuck at galaxy y logo
the other features like backup,format,etc are working fine and i am able to install .zips via stock recovery but cmw isn't working for me
PS
i was able to use cwm before to flash roms
using skins cwm
Click to expand...
Click to collapse
wipe data and cache before installing a rom... or if u hav already installed it then do a wipe data and cache... try installing something else
maybe my cwm is corrupted can anyone give me a link to the old zip ?
skin's cwm has been updated and it won't install
http://forum.xda-developers.com/showthread.php?t=1446796
and i wasn't able to find download link anywhere for madteam
http://forum.xda-developers.com/showthread.php?t=1467492
dranzer006 said:
maybe my cwm is corrupted can anyone give me a link to the old zip ?
skin's cwm has been updated and it won't install
http://forum.xda-developers.com/showthread.php?t=1446796
and i wasn't able to find download link anywhere for madteam
http://forum.xda-developers.com/showthread.php?t=1467492
Click to expand...
Click to collapse
what is your firmware sir?? maybe its about your firmware that the rom is compatible with so that it wont stuck on samsung logo or bootloop if you have that firmware like DXKL2 and DXLC1
Here you go CWM by madteam:
http://www.mediafire.com/?n3x18su3495fr8l
Also do remember to data wipe and cache wipe from both stock and CWM recoveries before installing any rom..If the ROM still doesnt flash ..use the stock rom package from dokys thread in android development and re-flash..that must fix the issue..
FuranshisuKurogawa said:
what is your firmware sir?? maybe its about your firmware that the rom is compatible with so that it wont stuck on samsung logo or bootloop if you have that firmware like DXKL2 and DXLC1
Click to expand...
Click to collapse
No firmware doesnt matter..All firmwares support all ROMS..but they may have some glitches like wifi issues etc..but atleast they will boot up
hitme987 said:
Here you go CWM by madteam:
http://www.mediafire.com/?n3x18su3495fr8l
Also do remember to data wipe and cache wipe from both stock and CWM recoveries before installing any rom..If the ROM still doesnt flash ..use the stock rom package from dokys thread in android development and re-flash..that must fix the issue..
No firmware doesnt matter..All firmwares support all ROMS..but they may have some glitches like wifi issues etc..but atleast they will boot up
Click to expand...
Click to collapse
maybe the custom rom files are corrupt he/she need to download it again....
using DDLC2 will try with madteam's cwm and report back
thanks
I'm unable to flash any custom Rom after rooting my device. It keeps getting stuck at the boot screen. I've followed all the directions as instructed. I did notice when trying to install a Rom it was not able to access the boot.img or unable to write it? Any help on this would be appreciated.
Did you install custom recovery?
Sent from my SGH-T889 using xda premium
Rhiannon224 said:
Did you install custom recovery?
Sent from m. y SGH-T889 using xda premium
Click to expand...
Click to collapse
Yes I did. TWRP & CWM. It seems to not be allowing access to write the boot.img?
drunkboi said:
I'm unable to flash any custom Rom after rooting my device. It keeps getting stuck at the boot screen. I've followed all the directions as instructed. I did notice when trying to install a Rom it was not able to access the boot.img or unable to write it? Any help on this would be appreciated.
Click to expand...
Click to collapse
Check download sum. If you use TWRP check if you un latest version.
drunkboi said:
I'm unable to flash any custom Rom after rooting my device. It keeps getting stuck at the boot screen. I've followed all the directions as instructed. I did notice when trying to install a Rom it was not able to access the boot.img or unable to write it? Any help on this would be appreciated.
Click to expand...
Click to collapse
what tutorial did you use?
i followed this guide and everything works perfectly
http://forum.xda-developers.com/showthread.php?t=1955423
Download the files needed, flash the .tar (cwm) with odin, go into cwm and flash superuser...done.
also are you pushing the files or using cwm to flash the rom zip?
jdiddy_ub said:
what tutorial did you use?
i followed this guide and everything works perfectly
http://forum.xda-developers.com/showthread.php?t=1955423
Download the files needed, flash the .tar (cwm) with odin, go into cwm and flash superuser...done.
also are you pushing the files or using cwm to flash the rom zip?
Click to expand...
Click to collapse
I followed the guide above. Do I need to have an SD card? I don't have one since I came from a Samsung Galaxy Nexus. I was flashing the Rom.zip through TWRP and CWM.
drunkboi said:
I followed the guide above. Do I need to have an SD card? I don't have one since I came from a Samsung Galaxy Nexus. I was flashing the Rom.zip through TWRP and CWM.
Click to expand...
Click to collapse
If your already rooted id maybe download goomanager and flash twrp through that, I initially rooted with the toolkit and had a hell of a time with flashing after I rooted, but once I did that I was good to go, just make sure you follow directions to the letter.
Sent from my SGH-T889 using xda premium
you dont have to put your roms on an sd card but i did...i always keep my roms on my sd if my phone has an sd slot
its odd that the flash isnt taking...the boot.img is the kernel....did you check the md5 sum?
I'm so frustrated! I've done everything as posted to root and flash a Rom on my device. I've verified I have root access. I've never had these issues! After rooting my device and flashing any Rom like Jedi it won't load past the start up screen.
drunkboi said:
I'm so frustrated! I've done everything as posted to root and flash a Rom on my device. I've verified I have root access. I've never had these issues! After rooting my device and flashing any Rom like Jedi it won't load past the start up screen.
Click to expand...
Click to collapse
are you flash by TWRP ?
Edit : Try flash rom with PC Odin or reflash CWM with PC Odin then try rom again with CWM
simplelife said:
are you flash by TWRP ?
Click to expand...
Click to collapse
Yes, and CWM. It dosn't seem to be an issue with Recovery. It seems to be having issues flashing the Kernel during installation. It seems to not be allowing access to write it. I have no idea why this would be? The device is properly rooted & have verified root access.
drunkboi said:
Yes, and CWM. It dosn't seem to be an issue with Recovery. It seems to be having issues flashing the Kernel during installation. It seems to not be allowing access to write it. I have no idea why this would be? The device is properly rooted & have verified root access.
Click to expand...
Click to collapse
Jedi Rom had custom kennel but i dont think that is issue(you can try another rom to see its go though). Like im said before try flash rom with PC Odin or Mobile Odin ( now support our note) or try reflash CWM then try flash rom again.
drunkboi said:
Yes, and CWM. It dosn't seem to be an issue with Recovery. It seems to be having issues flashing the Kernel during installation. It seems to not be allowing access to write it. I have no idea why this would be? The device is properly rooted & have verified root access.
Click to expand...
Click to collapse
Why do you think it is having an issue with the kernel? Did you try a cache wipe or factory reset after it loops?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Why do you think it is having an issue with the kernel? Did you try a cache wipe or factory reset after it loops?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
maybe you should return your phone to stock and start the process over?
xcrazydx said:
Why do you think it is having an issue with the kernel? Did you try a cache wipe or factory reset after it loops?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Because when trying to flash the BLACKSTAR Rom it said unable to access or write boot.img, somthing like that. I've tried both. It still doesn't go past the galaxy note start up screen.
jdiddy_ub said:
maybe you should return your phone to stock and start the process over?
Click to expand...
Click to collapse
Yes, I've done that several times.
simplelife said:
Jedi Rom had custom kennel but i dont think that is issue(you can try another rom to see its go though). Like im said before try flash rom with PC Odin or Mobile Odin ( now support our note) or try reflash CWM then try flash rom again.
Click to expand...
Click to collapse
How do you install custom Roms like Jedi using Odin?
Try flashing the ROM again in cwm..if it gets stuck at the boot screen..extract the boot.img and push the boot.IMG separately after
Sent from my SGH-T889 using Tapatalk 2
drunkboi said:
Because when trying to flash the BLACKSTAR Rom it said unable to access or write boot.img, somthing like that. I've tried both. It still doesn't go past the galaxy note start up screen.
Click to expand...
Click to collapse
Black star? ? Isnt that i717 note 1 ROM bro?
from my Galaxy Note 2!!!
》Jedi Roms 《
---------- Post added at 05:05 PM ---------- Previous post was at 05:04 PM ----------
drunkboi said:
How do you install custom Roms like Jedi using Odin?
Click to expand...
Click to collapse
Which recovery do you have right now... I use twrp and flash constantly with tests and updates...
from my Galaxy Note 2!!!
》Jedi Roms 《
hmmm, i have weird problem here, i just installed CWM 6.0.2.8 on my phone, in first using it working perceftly but then it doesn't work, please help me solve this problem, it's very annoying
or can somebody give me link the latest flashable CWM for ace 2
thanks before
thanks button awaiting
dv6661 said:
hmmm, i have weird problem here, i just installed CWM 6.0.2.8 on my phone, in first using it working perceftly but then it doesn't work, please help me solve this problem, it's very annoying
or can somebody give me link the latest flashable CWM for ace 2
thanks before
thanks button awaiting
Click to expand...
Click to collapse
What problem?
Sent from my GT-I8160 using Tapatalk
teddytsen said:
What problem?
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
the problem is " CWM is not working after first flashing"
can you give me the link of latest flashable CWM for galaxy Ace 2, please
thanks before
The CWM you flashed is a temporary one.
When you restart the phone into recovery, it goes into the original Samsung recovery, right? If so, then just re-flash the CWM. You'll need to do this every time to go into CWM.
qyx said:
The CWM you flashed is a temporary one.
When you restart the phone into recovery, it goes into the original Samsung recovery, right? If so, then just re-flash the CWM. You'll need to do this every time to go into CWM.
Click to expand...
Click to collapse
yeah i'm know that, but when im enter CWM not loaded, what version do you use ? give me please
I use the one from here: http://forum.xda-developers.com/showthread.php?t=2141395
(that thread says version 6.0.2.8, but when I run it it says 6.0.4.5)
I do not understand what you mean by "when im enter CWM not loaded". You need to flash the zip every time you want to run CWM, like you did the first time - somebody should correct me if I'm wrong.
qyx said:
I use the one from here: http://forum.xda-developers.com/showthread.php?t=2141395
(that thread says version 6.0.2.8, but when I run it it says 6.0.4.5)
I do not understand what you mean by "when im enter CWM not loaded". You need to flash the zip every time you want to run CWM, like you did the first time - somebody should correct me if I'm wrong.
Click to expand...
Click to collapse
okay i'll try it later
thanks for try to help , problem is when im get in to samsung recovery and flash temporary CWM recovery, it won't loaded, just black screen and then my phone restart.
what ROM do you use ?
when I was in stock MF1 I installed 6.0.2.8 (Shaaan thread, TY BTW) and it was temporary.
Then I flashed CM10.2 which installed me a new version of CWM (6.0.4.6) which is now persistent.
Can you develop a little bit more about your software configuration please ? ROM ? kernel ?
I have a similar problem. After i flashed cm 10.1 recovery dissapeared. I don't have cwm neither stock recovery. Any way to flash it via odin?
manthes said:
I have a similar problem. After i flashed cm 10.1 recovery dissapeared. I don't have cwm neither stock recovery. Any way to flash it via odin?
Click to expand...
Click to collapse
backup
flash stock via odin
flash cm10.1/gapps
try again see if recovery is there :/
i know this solution but i can't do the same thing every time i loose cwm because it worked before. Thats why i asked if it is possible to flash only cwm
manthes said:
i know this solution but i can't do the same thing every time i loose cwm because it worked before. Thats why i asked if it is possible to flash only cwm
Click to expand...
Click to collapse
no cwm odin flashable for us, sorry
The problem is with custom roms and my screen driver s6d.
Unfortunately only with stock rom everything is working fine
Hello members,i have a problem . I bought a samsung galaxy tab 3 7.0 wifi (SM-T210) last week and i have rooted it + installed cwm and after i flash anything(custom lock screen or custom rom) the tablet gets soft bricked and the rom dont boot anymore,it enters automaticaly in cwm. So how can i fix it?
d0vada said:
Hello members,i have a problem . I bought a samsung galaxy tab 3 7.0 wifi (SM-T210) last week and i have rooted it + installed cwm and after i flash anything(custom lock screen or custom rom) the tablet gets soft bricked and the rom dont boot anymore,it enters automaticaly in cwm. So how can i fix it?
Click to expand...
Click to collapse
Which recovery Version you are flashed on your tab?
And which root.zip you are used?
Flash Stockrom and try it again.
bierma32 said:
Which recovery Version you are flashed on your tab?
And which root.zip you are used?
Flash Stockrom and try it again.
Click to expand...
Click to collapse
Im using the latest TWRP recovery 2.7.0.0 and for root i use a zip called universal root armeabi *smth like that*
I allready flashed the stockrom 3 times and i got the same result. also im using the T210XXANC2 firmware.
In CWM, wipe data and factory reset. Then go to Download mode, use Odin and flash your stock rom. That should do it.
paranoidmarvin42 said:
In CWM, wipe data and factory reset. Then go to Download mode, use Odin and flash your stock rom. That should do it.
Click to expand...
Click to collapse
i have rooted stock rom running with latest twrp but if i flash a custom rom it wont boot anymore, it gets softbricked but i dont know why.
d0vada said:
i have rooted stock rom running with latest twrp but if i flash a custom rom it wont boot anymore, it gets softbricked but i dont know why.
Click to expand...
Click to collapse
What ROM are you trying to flash? You must have missed a step. Make sure you read the instructions carefully before doing anything and use a custom rom for your device. Try again. I'm also new to Android and has softbricked my tab a couple of times now.
Go back to stock. Let your device boot completely. Install recovery again. Reboot again.
To make it easier, how about watching a video so you can see how it's done properly? It helped me a lot. http://forum.xda-developers.com/showthread.php?t=2459817
Good luck.
paranoidmarvin42 said:
What ROM are you trying to flash? You must have missed a step. Make sure you read the instructions carefully before doing anything and use a custom rom for your device. Try again. I'm also new to Android and has softbricked my tab a couple of times now.
Go back to stock. Let your device boot completely. Install recovery again. Reboot again.
To make it easier, how about watching a video so you can see how it's done properly? It helped me a lot. http://forum.xda-developers.com/showthread.php?t=2459817
Good luck.
Click to expand...
Click to collapse
I want to flash seal rom. also, thanks for the links, i will check them later.
d0vada said:
I want to flash seal rom. also, thanks for the links, i will check them later.
Click to expand...
Click to collapse
Plesse,dont use TWRP , i prefere CWM or PhilzTouch,why : alot of user are have postet probs when they used TWRP.
Also i prefere after rooting The Blackhawk Kernel.
bierma32 said:
Plesse,dont use TWRP , i prefere CWM or PhilzTouch,why : alot of user are have postet probs when they used TWRP.
Also i prefere after rooting The Blackhawk Kernel.
Click to expand...
Click to collapse
So i have flashed (again) the stock firmware from sammobile,i rooted it,installed cwm 6.0.4.7 and then i flashed SEAL rom v4 and its not working. Its like something that doesnt let custom rom boot on my tab. Sad part is that i cant provide a logcat because the android wont boot.
EDIT: Do i have to unlock the bootloader?
d0vada said:
So i have flashed (again) the stock firmware from sammobile,i rooted it,installed cwm 6.0.4.7 and then i flashed SEAL rom v4 and its not working. Its like something that doesnt let custom rom boot on my tab. Sad part is that i cant provide a logcat because the android wont boot.
EDIT: Do i have to unlock the bootloader?
Click to expand...
Click to collapse
Last Try,
Have you flashed The Blackhawk Kernel?
If not , Boot Into recovery, make a full wipe, flash seal ,Blackhawk Kernel ,full wipe again and reboot.
If this all not help ,post your prob at The Rom Thread.
bierma32 said:
Last Try,
Have you flashed The Blackhawk Kernel?
If not , Boot Into recovery, make a full wipe, flash seal ,Blackhawk Kernel ,full wipe again and reboot.
If this all not help ,post your prob at The Rom Thread.
Click to expand...
Click to collapse
I allready tried 3 roms(seal, 4.2.2 beta 2 and inspire) and all goes to the same result. Also, after installing the cwm i flash first the blackhawk kernel and android boots normally (stock rom with custom kernel) but custom rom with or without custom kernel wont boot.
I had similar problem try flashing seal v3.
I just opened my twrp recovery to wipe everything off after I did so I rebooted to system twrp asked me wether to instal supersu or not I permitted it . When I tried to reboot to system all I does is shows Samsung Galaxy tab s powered by android and does not go any further . I tried clearing the cache but nothing works
device smt805
Rooted
I can boot into recovery if needed .just need proper guidance
I have stock rom
Lollipop 5.0.2
Sounds like you wiped your system as well. If so, you need to return to stock with the Kies3 software from Samsung or download and flash a rom for your device.
Sent from my SM-T700 using Tapatalk
Did you wipe system?
Just restore your nandroid backup.
ashyx said:
Did you wipe system?
Just restore your nandroid backup.
Click to expand...
Click to collapse
I didn't have any backup and yes I guess I wiped out my system
noxarcana said:
Sounds like you wiped your system as well. If so, you need to return to stock with the Kies3 software from Samsung or download and flash a rom for your device.
Sent from my SM-T700 using Tapatalk
Click to expand...
Click to collapse
Any method without using a computer
qwderhc said:
I didn't have any backup and yes I guess I wiped out my system
Click to expand...
Click to collapse
There you have download stock frimware and flash it with odin
qwderhc said:
I didn't have any backup and yes I guess I wiped out my system
Click to expand...
Click to collapse
No backup, really?
You will need to flash stock firmware with odin or a custom rom with twrp.
ashyx said:
No backup, really?
You will need to flash stock firmware with odin or a custom rom with twrp.
Click to expand...
Click to collapse
Yes, I've searched for the rom but how do I use twrp for it I can open it still but how to flash Phoenix rom with it
qwderhc said:
Yes, I've searched for the rom but how do I use twrp for it I can open it still but how to flash Phoenix rom with it
Click to expand...
Click to collapse
You need to select install in twrp then select the zip.
I also highly suggest you make a full back up with TWRP.