hey guys
i am not able to install custom rom .zip via CWM i don't get any error while installing, it shows "Installation complete" but later on its stuck at galaxy y logo
the other features like backup,format,etc are working fine and i am able to install .zips via stock recovery but cmw isn't working for me
PS
i was able to use cwm before to flash roms
using skins cwm
which rom were you flashing...
Sent from my GT-S5360 using Tapatalk 2
having this problem with all roms
btw
my cwm.zip size is 1.31mb
Try cwm by mad team
Do a data/cache wipe
Then again check... flashing the rom
Sent from my GT-S5360 using Tapatalk 2
dranzer006 said:
hey guys
i am not able to install custom rom .zip via CWM i don't get any error while installing, it shows "Installation complete" but later on its stuck at galaxy y logo
the other features like backup,format,etc are working fine and i am able to install .zips via stock recovery but cmw isn't working for me
PS
i was able to use cwm before to flash roms
using skins cwm
Click to expand...
Click to collapse
wipe data and cache before installing a rom... or if u hav already installed it then do a wipe data and cache... try installing something else
maybe my cwm is corrupted can anyone give me a link to the old zip ?
skin's cwm has been updated and it won't install
http://forum.xda-developers.com/showthread.php?t=1446796
and i wasn't able to find download link anywhere for madteam
http://forum.xda-developers.com/showthread.php?t=1467492
dranzer006 said:
maybe my cwm is corrupted can anyone give me a link to the old zip ?
skin's cwm has been updated and it won't install
http://forum.xda-developers.com/showthread.php?t=1446796
and i wasn't able to find download link anywhere for madteam
http://forum.xda-developers.com/showthread.php?t=1467492
Click to expand...
Click to collapse
what is your firmware sir?? maybe its about your firmware that the rom is compatible with so that it wont stuck on samsung logo or bootloop if you have that firmware like DXKL2 and DXLC1
Here you go CWM by madteam:
http://www.mediafire.com/?n3x18su3495fr8l
Also do remember to data wipe and cache wipe from both stock and CWM recoveries before installing any rom..If the ROM still doesnt flash ..use the stock rom package from dokys thread in android development and re-flash..that must fix the issue..
FuranshisuKurogawa said:
what is your firmware sir?? maybe its about your firmware that the rom is compatible with so that it wont stuck on samsung logo or bootloop if you have that firmware like DXKL2 and DXLC1
Click to expand...
Click to collapse
No firmware doesnt matter..All firmwares support all ROMS..but they may have some glitches like wifi issues etc..but atleast they will boot up
hitme987 said:
Here you go CWM by madteam:
http://www.mediafire.com/?n3x18su3495fr8l
Also do remember to data wipe and cache wipe from both stock and CWM recoveries before installing any rom..If the ROM still doesnt flash ..use the stock rom package from dokys thread in android development and re-flash..that must fix the issue..
No firmware doesnt matter..All firmwares support all ROMS..but they may have some glitches like wifi issues etc..but atleast they will boot up
Click to expand...
Click to collapse
maybe the custom rom files are corrupt he/she need to download it again....
using DDLC2 will try with madteam's cwm and report back
thanks
Related
i want to flash a rom ....but a have to get cmw firs, but i don't know how to flash it, i see the touch version but i don"t know if you have to flash it with the stock recovery or what....i look in all the post but is not cleal for me.....the pleas help me ........
please try questions in faq thread,bro
http://forum.xda-developers.com/showthread.php?t=1675474
but how to flash cmw by skin?????
i have to flash it in stock recovory or what????
http://forum.xda-developers.com/showthread.php?t=1713518
see this
You need to follow the Instruction properly.
If it ask you to flash via CWM, then download CWM and put it into your SD directly.
Then goto Recovery mode and select update from SD then select CWM zip file to enter CWM.
Good luck.
© Sent from Samsung Galaxy~Y
lackhoo said:
i want to flash a rom ....but a have to get cmw firs, but i don't know how to flash it, i see the touch version but i don"t know if you have to flash it with the stock recovery or what....i look in all the post but is not cleal for me.....the pleas help me ........
Click to expand...
Click to collapse
NB: please always flash your ROM with Clock Word Mode (CWM) it will minimize your risk of brick you phone
dimasrafi said:
NB: please always flash your ROM with Clock Word Mode (CWM) it will minimize your risk of brick you phone
Click to expand...
Click to collapse
nope...cwm won't minimize the risk. in fact, stock recovery is a lot safer than any 3rd party recovery.
dimasrafi said:
NB: please always flash your ROM with Clock Word Mode (CWM) it will minimize your risk of brick you phone
Click to expand...
Click to collapse
so why losing time with cmw whene you simply flash your rom trough stock recovery, sgy is very simple whene flashing rom, with my galaxy mini you have to flash cmw trough odin but it cmw is permanant. btw i have suces flash recticil rom, very nice rom........
thank you guys for your help........
kurotsugi said:
nope...cwm won't minimize the risk. in fact, stock recovery is a lot safer than any 3rd party recovery.
Click to expand...
Click to collapse
Yes. You are 101% currect.
Sent from my GT-S5360 using Xparent ICS Blue Tapatalk 2
lackhoo said:
so why losing time with cmw whene you simply flash your rom trough stock recovery, sgy is very simple whene flashing rom, with my galaxy mini you have to flash cmw trough odin but it cmw is permanant. btw i have suces flash recticil rom, very nice rom........
thank you guys for your help........
Click to expand...
Click to collapse
there's several advantages of using cwm
1. more recovery option.
2. no need to sign the zip file
3. more installation capability. we can't install kernel via stock recovery.
kurotsugi said:
there's several advantages of using cwm
1. more recovery option.
2. no need to sign the zip file
3. more installation capability. we can't install kernel via stock recovery.
Click to expand...
Click to collapse
Yeah if u are to flash a kernel u will need cwm!! And thats a necessity in various roms !!!
Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
pranjaldixit said:
Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
Click to expand...
Click to collapse
Before installing make backup wipe dalvik cache , cache, do factory reset and try again .. hope it helps
Sent from my Hero using xda premium
Actually I tell the whole story now. When I was making backup of my stock ROM the sd card showed low on space. So I removed that SD card and inserted the one which came with the Phone. On that I installed all the required zip files. Then I made backup of the stock ROM and the data. After that I followed these steps mentioned here -:
http://forum.xda-developers.com/showthread.php?t=1863260
According to the steps I did not did wipe davik cache etc. after instaling the ROM I did wipe factory and data reset and wipe cache partition. After following all the steps mentioned I rebooted my phone as mentioned. But after rebooting the phone is stuck on android logo. I then again went into recovery and tried to wipe dalvik cache the confirmation page that appears before wiping anything is not coming. Also when I tried to restore my phone to the stock ROM an error message is coming. So I am not able to restore to the stock ROM. This is the whole thing. So guys please help. I hope I have not bricked my phone. Any solutions?
Thanks
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Mate I used latest version of ClockWork Mod to install the ROM.
pranjaldixit said:
Mate I used latest version of ClockWork Mod to install the ROM.
Click to expand...
Click to collapse
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
pranjaldixit said:
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
Click to expand...
Click to collapse
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
pranjaldixit said:
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
Click to expand...
Click to collapse
I suggest that you flash your phone to stock rom again via odin..
Then change your recovery,i was preffered px-cwmV2,but i dont know is the link still alive or not..
Flash the recovery,reboot..
Then enter recovery mode again,install rom..
Sent from my GT-S5660 using Tapatalk 2
How to do flash stock ROM as the backup that I made is not working properly.
pranjaldixit said:
How to do flash stock ROM as the backup that I made is not working properly.
Click to expand...
Click to collapse
With odin,
Search ! there are allot of guide howto flash gio to stock with odin
Sent from my HTC Hero using xda app-developers app
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
phreak_or said:
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
Click to expand...
Click to collapse
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
pranjaldixit said:
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
Click to expand...
Click to collapse
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
phreak_or said:
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
Click to expand...
Click to collapse
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
pranjaldixit said:
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
Click to expand...
Click to collapse
yes
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
pranjaldixit said:
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
Click to expand...
Click to collapse
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
voetbalremco said:
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
Click to expand...
Click to collapse
I am not installing firmware right now. I am just wanting to install CWM v2 and try whether it is able to install MIUI successfully or not. If this one also fails then I will install the firmwares via odin. Hope you ate able to understand what I am saying. Please help.
Can anyone help.....
I have tried to flash a few custom roms but everytime I go to install it says installation aborted (BAD). I have downloaded the same rom a couple of times in case it was a bad download, but still get the same result. I flashed the leaked 4.3 via odin before trying to install custom roms, could this be the problem?. I am using philz recovery.
Anybody got any ideas what I'm doing wrong?.
Thanks in advance
Scotty
tuktukscotty said:
Can anyone help.....
I have tried to flash a few custom roms but everytime I go to install it says installation aborted (BAD). I have downloaded the same rom a couple of times in case it was a bad download, but still get the same result. I flashed the leaked 4.3 via odin before trying to install custom roms, could this be the problem?. I am using philz recovery.
Anybody got any ideas what I'm doing wrong?.
Thanks in advance
Scotty
Click to expand...
Click to collapse
go with a clean wipe,system included and flash the rom. make sure u verify the md5 of the rom downloaded and use latest philz version and make a backup of rom just to be safe before flashing anything, the latest philz support 4.3 flashing
shhbz said:
go with a clean wipe,system included and flash the rom. make sure u verify the md5 of the rom downloaded and use latest philz version and make a backup of rom just to be safe before flashing anything, the latest philz support 4.3 flashing
Click to expand...
Click to collapse
I did a full wipe before trying to install. Cleared cache etc. The rom I really want to install is Dr Ketan's. I don't understand how/what you mean by checking the md5??
tuktukscotty said:
I did a full wipe before trying to install. Cleared cache etc. The rom I really want to install is Dr Ketan's. I don't understand how/what you mean by checking the md5??
Click to expand...
Click to collapse
http://www.winmd5.com/ download this locate the downloaded rom file and it will calculate the md5 and then go to the link from where u downloaded v3 ketan rom u will see md5 details there just paste at the bottom and verify to see if it matches fine if not your file download is corrupt.
are u on latest philz recovery
shhbz said:
http://www.winmd5.com/ download this locate the downloaded rom file and verify it will calculate the md5 and then go to the link from where u downloaded v3 ketan rom u will see md5 details there just paste at the bottom to see if it matches fine if not your file download is corrupt.
are u on latest philz recovery
Click to expand...
Click to collapse
I'm using philz touch 4.6.4
tuktukscotty said:
I'm using philz touch 4.6.4
Click to expand...
Click to collapse
use this http://d-h.st/iII i
i hope u have n7100 international version as u wish to flash keten rom
after flashing latest philz make a backup of rom and flash http://d-h.st/fWr u lose everything from internal it will reboot back to recovery.
procced with v3 install and just wipe cache and dalvik before restart after flashing
shhbz said:
use this http://d-h.st/iII i
i hope u have n7100 international version as u wish to flash keten rom
after flashing latest philz make a backup of rom and flash http://d-h.st/fWr u lose everything from internal it will reboot back to recovery.
procced with v3 install and just wipe cache and dalvik before restart after flashing
Click to expand...
Click to collapse
I have a UK bought note 2
tuktukscotty said:
I have a UK bought note 2
Click to expand...
Click to collapse
yes that's fine if ur box says n7100 and below battery check
shhbz said:
yes that's fine if ur box says n7100 and below battery check
Click to expand...
Click to collapse
Yes defo says GT-N7100
tuktukscotty said:
Yes defo says GT-N7100
Click to expand...
Click to collapse
you are good to proceed with the link file
shhbz said:
you are good to proceed with the link file
Click to expand...
Click to collapse
I have installed the later philz recovery. Just going to try and flash again
tuktukscotty said:
I have installed the later philz recovery. Just going to try and flash again
Click to expand...
Click to collapse
Nope!.
Still unable to install. It says:
-- Installing: /sdcard/DrKetan_Custom_ROM_V3Hybrid.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/DrKetan_Custom_ROM_V3Hybrid.zip
(bad)
Installation aborted
press any key to continue.
What am I doing wrong????? This is really so frustrating. Have I done something when installing the leaked version of 4.3 which is now stopping anything working??. Anybody got any ideas???.
Someone out there must know what I'm doing wrong...........please help.
shhbz said:
you are good to proceed with the link file
Click to expand...
Click to collapse
I tried and tried and tried but couldn't get it to install. I then decied to reflash back to 4.1.2 stock via odin. Then tried to install Dr's again but still wouldn't work. I then flashed the leaked 4.3 via odin and repeated the Dr's install and it worked!!!!!!.
Thanks for the advice.
Scotty.
hmmm, i have weird problem here, i just installed CWM 6.0.2.8 on my phone, in first using it working perceftly but then it doesn't work, please help me solve this problem, it's very annoying
or can somebody give me link the latest flashable CWM for ace 2
thanks before
thanks button awaiting
dv6661 said:
hmmm, i have weird problem here, i just installed CWM 6.0.2.8 on my phone, in first using it working perceftly but then it doesn't work, please help me solve this problem, it's very annoying
or can somebody give me link the latest flashable CWM for ace 2
thanks before
thanks button awaiting
Click to expand...
Click to collapse
What problem?
Sent from my GT-I8160 using Tapatalk
teddytsen said:
What problem?
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
the problem is " CWM is not working after first flashing"
can you give me the link of latest flashable CWM for galaxy Ace 2, please
thanks before
The CWM you flashed is a temporary one.
When you restart the phone into recovery, it goes into the original Samsung recovery, right? If so, then just re-flash the CWM. You'll need to do this every time to go into CWM.
qyx said:
The CWM you flashed is a temporary one.
When you restart the phone into recovery, it goes into the original Samsung recovery, right? If so, then just re-flash the CWM. You'll need to do this every time to go into CWM.
Click to expand...
Click to collapse
yeah i'm know that, but when im enter CWM not loaded, what version do you use ? give me please
I use the one from here: http://forum.xda-developers.com/showthread.php?t=2141395
(that thread says version 6.0.2.8, but when I run it it says 6.0.4.5)
I do not understand what you mean by "when im enter CWM not loaded". You need to flash the zip every time you want to run CWM, like you did the first time - somebody should correct me if I'm wrong.
qyx said:
I use the one from here: http://forum.xda-developers.com/showthread.php?t=2141395
(that thread says version 6.0.2.8, but when I run it it says 6.0.4.5)
I do not understand what you mean by "when im enter CWM not loaded". You need to flash the zip every time you want to run CWM, like you did the first time - somebody should correct me if I'm wrong.
Click to expand...
Click to collapse
okay i'll try it later
thanks for try to help , problem is when im get in to samsung recovery and flash temporary CWM recovery, it won't loaded, just black screen and then my phone restart.
what ROM do you use ?
when I was in stock MF1 I installed 6.0.2.8 (Shaaan thread, TY BTW) and it was temporary.
Then I flashed CM10.2 which installed me a new version of CWM (6.0.4.6) which is now persistent.
Can you develop a little bit more about your software configuration please ? ROM ? kernel ?
I have a similar problem. After i flashed cm 10.1 recovery dissapeared. I don't have cwm neither stock recovery. Any way to flash it via odin?
manthes said:
I have a similar problem. After i flashed cm 10.1 recovery dissapeared. I don't have cwm neither stock recovery. Any way to flash it via odin?
Click to expand...
Click to collapse
backup
flash stock via odin
flash cm10.1/gapps
try again see if recovery is there :/
i know this solution but i can't do the same thing every time i loose cwm because it worked before. Thats why i asked if it is possible to flash only cwm
manthes said:
i know this solution but i can't do the same thing every time i loose cwm because it worked before. Thats why i asked if it is possible to flash only cwm
Click to expand...
Click to collapse
no cwm odin flashable for us, sorry
The problem is with custom roms and my screen driver s6d.
Unfortunately only with stock rom everything is working fine
I'm trying to flash this ROM http://forum.xda-developers.com/showthread.php?t=2682782 on my Xperia ion over currently running paranoid ROM based on 4.1.2
After wiping data ,cache,dalvik cache in TWRP recovery when i try to flash the ROM it failed and show some error of "Failed to update partition detail" or something..
and not only this i've also tried another CM ROM and got same result .. Any step missing ??
Could anyone tell me the solution ??
Anyone could please throw some light on my problem ??
Try using ClockworkMod Recovery instead of TWRP.
How to flash CWM over TWRP ?
Mirhawk said:
Try using ClockworkMod Recovery instead of TWRP.
Click to expand...
Click to collapse
Can you give me link to innstall CWM over TWRP ..?
I think You will have to revert to stock for that and then root and install cwm. Here is the link to stock ftf, Select which ever suitable. I don't know which root works on Your device, so do check the thread for it. Then install the cwm.
Stock FTF:
http://forum.xda-developers.com/showthread.php?t=1752345
CWM:
http://forum.xda-developers.com/showthread.php?t=1830170
Mirhawk said:
I think You will have to revert to stock for that and then root and install cwm. Here is the link to stock ftf, Select which ever suitable. I don't know which root works on Your device, so do check the thread for it. Then install the cwm.
Stock FTF:
http://forum.xda-developers.com/showthread.php?t=1752345
CWM:
http://forum.xda-developers.com/showthread.php?t=1830170
Click to expand...
Click to collapse
Is there any way i can install this ROM currently directly through on over my currenlty ROM except all starting from the fresh ??
my internet connection is slow
akhil17kr said:
Is there any way i can install this ROM currently directly through on over my currenlty ROM except all starting from the fresh ??
my internet connection is slow
Click to expand...
Click to collapse
Well, You can try this app. It is an app to manage ROM and CWM, and hopefully will install CWM on Your phone.
Link
https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager
Mirhawk said:
Well, You can try this app. It is an app to manage ROM and CWM, and hopefully will install CWM on Your phone.
Link
https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager
Click to expand...
Click to collapse
UPDATE: I just need to flash the Kernel provided in the ROM ZIP package (Boot.img)...
How can i forget such a simple step
thanks anyways...