Develop Bugs

[Q] Stuck on Android Logo

Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.

pranjaldixit said:
Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
Click to expand...
Click to collapse
Before installing make backup wipe dalvik cache , cache, do factory reset and try again .. hope it helps
Sent from my Hero using xda premium

Actually I tell the whole story now. When I was making backup of my stock ROM the sd card showed low on space. So I removed that SD card and inserted the one which came with the Phone. On that I installed all the required zip files. Then I made backup of the stock ROM and the data. After that I followed these steps mentioned here -:
http://forum.xda-developers.com/showthread.php?t=1863260
According to the steps I did not did wipe davik cache etc. after instaling the ROM I did wipe factory and data reset and wipe cache partition. After following all the steps mentioned I rebooted my phone as mentioned. But after rebooting the phone is stuck on android logo. I then again went into recovery and tried to wipe dalvik cache the confirmation page that appears before wiping anything is not coming. Also when I tried to restore my phone to the stock ROM an error message is coming. So I am not able to restore to the stock ROM. This is the whole thing. So guys please help. I hope I have not bricked my phone. Any solutions?
Thanks

As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2

AiphNday said:
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Mate I used latest version of ClockWork Mod to install the ROM.

pranjaldixit said:
Mate I used latest version of ClockWork Mod to install the ROM.
Click to expand...
Click to collapse
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2

AiphNday said:
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.

pranjaldixit said:
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
Click to expand...
Click to collapse
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2

AiphNday said:
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.

pranjaldixit said:
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
Click to expand...
Click to collapse
I suggest that you flash your phone to stock rom again via odin..
Then change your recovery,i was preffered px-cwmV2,but i dont know is the link still alive or not..
Flash the recovery,reboot..
Then enter recovery mode again,install rom..
Sent from my GT-S5660 using Tapatalk 2

How to do flash stock ROM as the backup that I made is not working properly.

pranjaldixit said:
How to do flash stock ROM as the backup that I made is not working properly.
Click to expand...
Click to collapse
With odin,
Search ! there are allot of guide howto flash gio to stock with odin
Sent from my HTC Hero using xda app-developers app

If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.

phreak_or said:
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
Click to expand...
Click to collapse
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.

pranjaldixit said:
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
Click to expand...
Click to collapse
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!

phreak_or said:
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
Click to expand...
Click to collapse
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks

pranjaldixit said:
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
Click to expand...
Click to collapse
yes

And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks

pranjaldixit said:
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
Click to expand...
Click to collapse
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed

voetbalremco said:
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
Click to expand...
Click to collapse
I am not installing firmware right now. I am just wanting to install CWM v2 and try whether it is able to install MIUI successfully or not. If this one also fails then I will install the firmwares via odin. Hope you ate able to understand what I am saying. Please help.

[Q] help with recovery

I am sorry about the noobness but i cant seem to find a proper thread for recovery setup.
I installed ROM Manager and then the CWM recovery from there.
But if i try to root into recovery I get a " android with a exclamation mark" - so assumes i messed something up ?
only way is to power cycle the device .
Can anyone here please help how i install CWM as i want to flas CM 11

mshenoy4573 said:
I am sorry about the noobness but i cant seem to find a proper thread for recovery setup.
I installed ROM Manager and then the CWM recovery from there.
But if i try to root into recovery I get a " android with a exclamation mark" - so assumes i messed something up ?
only way is to power cycle the device .
Can anyone here please help how i install CWM as i want to flas CM 11
Click to expand...
Click to collapse
Have you tried going back to freegee and installing cmw there?

I used freegee.......it works...but couldn't get philz to work.. Its all good though 6.0.4.7 I think it is works fine for me so far
*2SHAYNEZ*KCCO*E980*

Yes guys. Thank you for the help.
Tried freegee and I got CWM to work finally pheww.
Now I have backup and just installed CM11 nightly
Thank you so much
Sent from my LG-E980 using xda app-developers app

shayneflashindaily said:
I used freegee.......it works...but couldn't get philz to work.. Its all good though 6.0.4.7 I think it is works fine for me so far
*2SHAYNEZ*KCCO*E980*
Click to expand...
Click to collapse
How were you able to make flashing custom roms work using freegee? I successfully rooted my Optimus G Pro and used freegee to install CWM recovery 6.0.4.7, but everytime I try to flash a custom rom - the phone would reboot after 10 -15 seconds. I followed and installed the custom roms accordingly to the instructions. Can you help me?

DraghanC said:
How were you able to make flashing custom roms work using freegee? I successfully rooted my Optimus G Pro and used freegee to install CWM recovery 6.0.4.7, but everytime I try to flash a custom rom - the phone would reboot after 10 -15 seconds. I followed and installed the custom roms accordingly to the instructions. Can you help me?
Click to expand...
Click to collapse
When you start the freegee app is there an option to "unlock" ?
also, are you able to use CWM otherwise? liks to make a nandroid backup and such ?

mshenoy4573 said:
When you start the freegee app is there an option to "unlock" ?
also, are you able to use CWM otherwise? liks to make a nandroid backup and such ?
Click to expand...
Click to collapse
There are two different versions of Freegee on the Playstore. One is the free version and One is the paid version. I used the free version and when I open the app to install CWM recovery I don't see the "unlock" option, so I think the "unlock" option is only available in the paid version. Also, when I used the free version of Freegee to install CWM recovery, I can make and restore my nandroid backup. Maybe I need to buy the paid version of Freegee??

no u don't need paid.
also I didn't have the unlock option and I was able to flash.
I would say try twrp.
also are u trying just 1 ROM or have to tried a couple. maybe do that

mshenoy4573 said:
no u don't need paid.
also I didn't have the unlock option and I was able to flash.
I would say try twrp.
also are u trying just 1 ROM or have to tried a couple. maybe do that
Click to expand...
Click to collapse
I already tried 3 different roms and they all turned out the same. Keep rebooting after 10 - 15 seconds. I might have to give twarp a try. thanks

Just wondering, what software version is your phone?
Sent from my LG-E980 using XDA Premium 4 mobile app

Check in CWM recovery, before you flash any of the ROM's that LOKI support is enabled, I think you can find it under Advanced and it says something like "Toggle LOKI support"
Erik

ricco333 said:
Check in CWM recovery, before you flash any of the ROM's that LOKI support is enabled, I think you can find it under Advanced and it says something like "Toggle LOKI support"
Erik
Click to expand...
Click to collapse
okay I will try that and see if it works.

ricco333 said:
Check in CWM recovery, before you flash any of the ROM's that LOKI support is enabled, I think you can find it under Advanced and it says something like "Toggle LOKI support"
Erik
Click to expand...
Click to collapse
do I enable Loki after the flash or before the flash? Because I enable loki in the advance option of CWM recovery after I flash a custom rom and the phone still reboots 10-15 seconds. I did all the normal wipes and stuff too. I'm thinking maybe its because of I'm the software version that I'm on which is E98010g.

He said "check before you flash any rom,that LOKI support is enabled"... You should carefully read instructions before you do anything or you will end with bricked device...
Sent from Tapatalk

mshenoy4573 said:
I am sorry about the noobness but i cant seem to find a proper thread for recovery setup.
I installed ROM Manager and then the CWM recovery from there.
But if i try to root into recovery I get a " android with a exclamation mark" - so assumes i messed something up ?
only way is to power cycle the device .
Can anyone here please help how i install CWM as i want to flas CM 11
Click to expand...
Click to collapse
i did this as well and somehow now i can only get into twrp however i cant flash anything...any direction on this? i cant find the file i need to put on the sd card and flash thru twrp...any help?

For some reason Rom manager cwm didn't work for me so I tried installing freegee from the play store and installing cwm from there.
Since freegee my cwm works fine and I was able to flash.
Have you given freegee a try ?
Sent from my LG-E980 using xda app-developers app

I'm having the same trouble with recovery. I was on SlimBean for several months and decided to flash a ROM from RadeonMaya, but it wouldn't boot, so I tried to restore my backup of Slim from CWM. It looked like it restored properly, but it wouldn't boot either. I finally reverted back to stock and rooted again, downloaded Freegee and tried to flash CWM. I booted into recovery to flash my Slim backup, but I got an "error loki-ifying the boot image". I tried Phil's recovery, but couldn't boot back into recovery from CWM
Since then, I have not been able to flash anything, and have reverted back to stock probably a dozen times. I've tried TWRP, but can't flash a version that works on 4.1.2. I'm beyond frustrated at this point. I had fun flashing on this phone until these problems showed up, now I'm just going to try to like the stock ROM and hope we get an update to KitKat.

Just a quick question guys. What does freegee's "unlock" feature do? I ask because I don't get that option in Freegee either. Is it supposed to network unlock your phone or? Also, what is the need for the unlock?

[Q]How to install custom rom without softbrick

Hello members,i have a problem . I bought a samsung galaxy tab 3 7.0 wifi (SM-T210) last week and i have rooted it + installed cwm and after i flash anything(custom lock screen or custom rom) the tablet gets soft bricked and the rom dont boot anymore,it enters automaticaly in cwm. So how can i fix it?

d0vada said:
Hello members,i have a problem . I bought a samsung galaxy tab 3 7.0 wifi (SM-T210) last week and i have rooted it + installed cwm and after i flash anything(custom lock screen or custom rom) the tablet gets soft bricked and the rom dont boot anymore,it enters automaticaly in cwm. So how can i fix it?
Click to expand...
Click to collapse
Which recovery Version you are flashed on your tab?
And which root.zip you are used?
Flash Stockrom and try it again.

bierma32 said:
Which recovery Version you are flashed on your tab?
And which root.zip you are used?
Flash Stockrom and try it again.
Click to expand...
Click to collapse
Im using the latest TWRP recovery 2.7.0.0 and for root i use a zip called universal root armeabi *smth like that*
I allready flashed the stockrom 3 times and i got the same result. also im using the T210XXANC2 firmware.

In CWM, wipe data and factory reset. Then go to Download mode, use Odin and flash your stock rom. That should do it.

paranoidmarvin42 said:
In CWM, wipe data and factory reset. Then go to Download mode, use Odin and flash your stock rom. That should do it.
Click to expand...
Click to collapse
i have rooted stock rom running with latest twrp but if i flash a custom rom it wont boot anymore, it gets softbricked but i dont know why.

d0vada said:
i have rooted stock rom running with latest twrp but if i flash a custom rom it wont boot anymore, it gets softbricked but i dont know why.
Click to expand...
Click to collapse
What ROM are you trying to flash? You must have missed a step. Make sure you read the instructions carefully before doing anything and use a custom rom for your device. Try again. I'm also new to Android and has softbricked my tab a couple of times now.
Go back to stock. Let your device boot completely. Install recovery again. Reboot again.
To make it easier, how about watching a video so you can see how it's done properly? It helped me a lot. http://forum.xda-developers.com/showthread.php?t=2459817
Good luck.

paranoidmarvin42 said:
What ROM are you trying to flash? You must have missed a step. Make sure you read the instructions carefully before doing anything and use a custom rom for your device. Try again. I'm also new to Android and has softbricked my tab a couple of times now.
Go back to stock. Let your device boot completely. Install recovery again. Reboot again.
To make it easier, how about watching a video so you can see how it's done properly? It helped me a lot. http://forum.xda-developers.com/showthread.php?t=2459817
Good luck.
Click to expand...
Click to collapse
I want to flash seal rom. also, thanks for the links, i will check them later.

d0vada said:
I want to flash seal rom. also, thanks for the links, i will check them later.
Click to expand...
Click to collapse
Plesse,dont use TWRP , i prefere CWM or PhilzTouch,why : alot of user are have postet probs when they used TWRP.
Also i prefere after rooting The Blackhawk Kernel.

bierma32 said:
Plesse,dont use TWRP , i prefere CWM or PhilzTouch,why : alot of user are have postet probs when they used TWRP.
Also i prefere after rooting The Blackhawk Kernel.
Click to expand...
Click to collapse
So i have flashed (again) the stock firmware from sammobile,i rooted it,installed cwm 6.0.4.7 and then i flashed SEAL rom v4 and its not working. Its like something that doesnt let custom rom boot on my tab. Sad part is that i cant provide a logcat because the android wont boot.
EDIT: Do i have to unlock the bootloader?

d0vada said:
So i have flashed (again) the stock firmware from sammobile,i rooted it,installed cwm 6.0.4.7 and then i flashed SEAL rom v4 and its not working. Its like something that doesnt let custom rom boot on my tab. Sad part is that i cant provide a logcat because the android wont boot.
EDIT: Do i have to unlock the bootloader?
Click to expand...
Click to collapse
Last Try,
Have you flashed The Blackhawk Kernel?
If not , Boot Into recovery, make a full wipe, flash seal ,Blackhawk Kernel ,full wipe again and reboot.
If this all not help ,post your prob at The Rom Thread.

bierma32 said:
Last Try,
Have you flashed The Blackhawk Kernel?
If not , Boot Into recovery, make a full wipe, flash seal ,Blackhawk Kernel ,full wipe again and reboot.
If this all not help ,post your prob at The Rom Thread.
Click to expand...
Click to collapse
I allready tried 3 roms(seal, 4.2.2 beta 2 and inspire) and all goes to the same result. Also, after installing the cwm i flash first the blackhawk kernel and android boots normally (stock rom with custom kernel) but custom rom with or without custom kernel wont boot.

I had similar problem try flashing seal v3.

[REQ] CWM 6.0.4.7 flashable recovery

Hi all! I can't seem to find a flashable CWM 6.0.4.7 recovery for our G PRO(E98x/F240x).
If anyone can give me a link or the file itself, I would be very thankful!
Thanks in advance!

MitoTakatori said:
Hi all! I can't seem to find a flashable CWM 6.0.4.7 recovery for our G PRO(E98x/F240x).
If anyone can give me a link or the file itself, I would be very thankful!
Thanks in advance!
Click to expand...
Click to collapse
here you go

hyperionx7 said:
here you go
Click to expand...
Click to collapse
Wow that is fast! Thanks mate. I'll try this one. Kudos!

hyperionx7 said:
here you go
Click to expand...
Click to collapse
Loki check problem when I flashed it. Any lokified recovery? Thanks!

MitoTakatori said:
Loki check problem when I flashed it. Any lokified recovery? Thanks!
Click to expand...
Click to collapse
well i took that file from freegee folder, maybe you must flash this file first

Download CWM OR TWRP without any hassle
Just download freegee(root) from Google play store and once installed and opened ....let it download the necessary....then just click on cwm or twrp as per ur wish ......u might then feel as if the app has frozen....but it is the process of downloading...... And once finished it will show flash successful ....

Works with 4.4.2?
I used the FreeGee app on stock 4.4.2 V20c earlier, but it bricked my device. Why is that? How do I install a recovery on 4.4.2?

i have a question on flashing the cwm recovery image, i had to go back to stock as i was soft bricked - i now need to install a recovery and i am sure that when i did this a few weeks ago on my g pro i used flashify and flashed the cwm recovery image through this app and everything works ed well, now i am trying to do it and it flashes the file but wont go into recovery - it says fastboot mode started but never goes into recovery, i also tried rom toolbox to flash it and not having any luck - anyone have a way to do this ?

hyperionx7 said:
here you go
Click to expand...
Click to collapse
Not work on LG F240L? Help
I want to flash rom [ROM][UNOFFICIAL][CM12][5.0.2][2/1/15] LiquidSmooth v4.0 on http://forum.xda-developers.com/opt...liquidsmooth-v4-0-t3013270/page3#post58726587
or rom Mokee http://download.mokeedev.com/?device=e980
Help me!
Thank's

I would like to install a CWM touch variant, is there a way to get it done with KK stock rom?
I know it needs to be "lokified", but I have no clue how to do this.
Is there any tutorial to do this?

chrisdotjan said:
I would like to install a CWM touch variant, is there a way to get it done with KK stock rom?
I know it needs to be "lokified", but I have no clue how to do this.
Is there any tutorial to do this?
Click to expand...
Click to collapse
Philz touch cwm is a good one, you can find here on xda, or via Google search. However, my personal experience with cwm touch variant on e980 is that it causes the recovery bootloop (where you just keeps on going back to the recovery screen). Version 6.0.47 is stable , and will not cause the boot loop say when you try to open the recovery by using the up volume + power buttons. This seem to be the issue too with the cwm provided by cm update in the developer's option. Read the postings in the Philz's thread if you want to know more about the recovery loop and the touch cwm.

I get wrong date and time whene i make a backup. I have a E986. How can i fix this?

Cant Install CWM On Samsung Note II N7100

Hello everyone .
I have problems installing CWM on my phone , i tried everything on this thread " http://forum.xda-developers.com/showthread.php?t=2445480 " and it would never work for me
I keep getting pass on ODIN but it keep reboot back into normal Android not recovery mode
What do it do , and please keep in mind that i am too noob with all the hard words for rooting and flashing stuff , so please explain to me what should i do
Thanks in advance .

.Hell. said:
Hello everyone .
I have problems installing CWM on my phone , i tried everything on this thread " http://forum.xda-developers.com/showthread.php?t=2445480 " and it would never work for me
I keep getting pass on ODIN but it keep reboot back into normal Android not recovery mode
What do it do , and please keep in mind that i am too noob with all the hard words for rooting and flashing stuff , so please explain to me what should i do
Thanks in advance .
Click to expand...
Click to collapse
Kitkat overwrites recovery on every reboot. So here is the solution:
When you flash cwm via ODIN, untick the auto-reboot option. Let the odin flash the file and wait for pass message.
Now reboot directly to recovery (not to phone). You will be in cwm. From there you can reboot to your phone.
Now power off your phone and see if you have a cwm recovery.
Press thumps up if you found this suggestion helpful.

ceomaverick said:
Kitkat overwrites recovery on every reboot. So here is the solution:
When you flash cwm via ODIN, untick the auto-reboot option. Let the odin flash the file and wait for pass message.
Now reboot directly to recovery (not to phone). You will be in cwm. From there you can reboot to your phone.
Now power off your phone and see if you have a cwm recovery.
Press thumps up if you found this suggestion helpful.
Click to expand...
Click to collapse
I have did what you just told me and still nothing happened and got back into normal ROM with no custom recovery , and i am on Android 4.3 i think that is jellybean not kitkat

.Hell. said:
I have did what you just told me and still nothing happened and got back into normal ROM with no custom recovery , and i am on Android 4.3 i think that is jellybean not kitkat
Click to expand...
Click to collapse
Well that is certainly weird. Are you sure you are using correct cwm file. Can you put the link of cwm file you are using?

ceomaverick said:
Well that is certainly weird. Are you sure you are using correct cwm file. Can you put the link of cwm file you are using?
Click to expand...
Click to collapse
Well i tried 3 Philz recovery files and nothing worked and here they are :
http://d-h.st/OIX
http://d-h.st/IVq
http://forum.xda-developers.com/showpost.php?p=53488494
if you have any detailed way to do it with links you can help me by posting them and i will also try your way

.Hell. said:
Well i tried 3 Philz recovery files and nothing worked and here they are :
http://d-h.st/OIX
http://d-h.st/IVq
http://forum.xda-developers.com/showpost.php?p=53488494
if you have any detailed way to do it with links you can help me by posting them and i will also try your way
Click to expand...
Click to collapse
Try this one:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.48.4-n7100.zip.md5
I hope your note is 7100 not 7105.

ceomaverick said:
Try this one:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.48.4-n7100.zip.md5
I hope your note is 7100 not 7105.
Click to expand...
Click to collapse
Hello , Yes my device is N7100 and i am currently on 4.3 Jellybean and i have tried your recovery file with no success still i don't know why D=

Hello , excuse me for a stupid question , but ... is your note 2 rooted ?

gb61 said:
Hello , excuse me for a stupid question , but ... is your note 2 rooted ?
Click to expand...
Click to collapse
No its not i just got it so i was trying to install CWM for the first time then root it and maybe install a custom ROM later

.Hell. said:
No its not i just got it so i was trying to install CWM for the first time then root it and maybe install a custom ROM later
Click to expand...
Click to collapse
Ok, here is the problem , you must root your phone first and after you can install a recovery like Philz or TWRP.

gb61 said:
Ok, here is the problem , you must root your phone first and after you can install a recovery like Philz or TWRP.
Click to expand...
Click to collapse
I am trying to do everything here on this thread and the first thing he said is that i need to have CWM Recovery first installed before rooting or doing anything
http://forum.xda-developers.com/showthread.php?t=2445480

.Hell. said:
I am trying to do everything here on this thread and the first thing he said is that i need to have CWM Recovery first installed before rooting or doing anything
http://forum.xda-developers.com/showthread.php?t=2445480
Click to expand...
Click to collapse
A custom recovery is necessary to install a custom rom but you can rooted your phone with Odin PC and CF-Auto-Root-t03g-t03gxx-gtn7100.zip
For example there is an explanation here :http://www.ibtimes.co.uk/galaxy-note2-n7100-root-android43-xxuemk4-jellybean-523833.
You can find others in google with search "how to root samsung galaxy note 2" .
The most important before installing is to copy your important folder to your PC.
I hope that can help you.
Excuse me for my english
---------- Post added at 05:01 PM ---------- Previous post was at 04:53 PM ----------
Other link in XDA it's seems more clear : http://forum.xda-developers.com/showthread.php?t=2143479

Okay guys i have installed Root on my phone using these two threads
http://forum.xda-developers.com/showthread.php?t=2143479
http://forum.xda-developers.com/showthread.php?t=2618261
Now what i should do actually because my problem still remain , that i cant install CWM and it keep reboot into Android not Recovery and i have tried all the methods but nothing works for me so far still

Okay guys thank you for your help , and for anyone who have my problem i used mobile odin to flash CWM