I'm unable to flash any custom Rom after rooting my device. It keeps getting stuck at the boot screen. I've followed all the directions as instructed. I did notice when trying to install a Rom it was not able to access the boot.img or unable to write it? Any help on this would be appreciated.
Did you install custom recovery?
Sent from my SGH-T889 using xda premium
Rhiannon224 said:
Did you install custom recovery?
Sent from m. y SGH-T889 using xda premium
Click to expand...
Click to collapse
Yes I did. TWRP & CWM. It seems to not be allowing access to write the boot.img?
drunkboi said:
I'm unable to flash any custom Rom after rooting my device. It keeps getting stuck at the boot screen. I've followed all the directions as instructed. I did notice when trying to install a Rom it was not able to access the boot.img or unable to write it? Any help on this would be appreciated.
Click to expand...
Click to collapse
Check download sum. If you use TWRP check if you un latest version.
drunkboi said:
I'm unable to flash any custom Rom after rooting my device. It keeps getting stuck at the boot screen. I've followed all the directions as instructed. I did notice when trying to install a Rom it was not able to access the boot.img or unable to write it? Any help on this would be appreciated.
Click to expand...
Click to collapse
what tutorial did you use?
i followed this guide and everything works perfectly
http://forum.xda-developers.com/showthread.php?t=1955423
Download the files needed, flash the .tar (cwm) with odin, go into cwm and flash superuser...done.
also are you pushing the files or using cwm to flash the rom zip?
jdiddy_ub said:
what tutorial did you use?
i followed this guide and everything works perfectly
http://forum.xda-developers.com/showthread.php?t=1955423
Download the files needed, flash the .tar (cwm) with odin, go into cwm and flash superuser...done.
also are you pushing the files or using cwm to flash the rom zip?
Click to expand...
Click to collapse
I followed the guide above. Do I need to have an SD card? I don't have one since I came from a Samsung Galaxy Nexus. I was flashing the Rom.zip through TWRP and CWM.
drunkboi said:
I followed the guide above. Do I need to have an SD card? I don't have one since I came from a Samsung Galaxy Nexus. I was flashing the Rom.zip through TWRP and CWM.
Click to expand...
Click to collapse
If your already rooted id maybe download goomanager and flash twrp through that, I initially rooted with the toolkit and had a hell of a time with flashing after I rooted, but once I did that I was good to go, just make sure you follow directions to the letter.
Sent from my SGH-T889 using xda premium
you dont have to put your roms on an sd card but i did...i always keep my roms on my sd if my phone has an sd slot
its odd that the flash isnt taking...the boot.img is the kernel....did you check the md5 sum?
I'm so frustrated! I've done everything as posted to root and flash a Rom on my device. I've verified I have root access. I've never had these issues! After rooting my device and flashing any Rom like Jedi it won't load past the start up screen.
drunkboi said:
I'm so frustrated! I've done everything as posted to root and flash a Rom on my device. I've verified I have root access. I've never had these issues! After rooting my device and flashing any Rom like Jedi it won't load past the start up screen.
Click to expand...
Click to collapse
are you flash by TWRP ?
Edit : Try flash rom with PC Odin or reflash CWM with PC Odin then try rom again with CWM
simplelife said:
are you flash by TWRP ?
Click to expand...
Click to collapse
Yes, and CWM. It dosn't seem to be an issue with Recovery. It seems to be having issues flashing the Kernel during installation. It seems to not be allowing access to write it. I have no idea why this would be? The device is properly rooted & have verified root access.
drunkboi said:
Yes, and CWM. It dosn't seem to be an issue with Recovery. It seems to be having issues flashing the Kernel during installation. It seems to not be allowing access to write it. I have no idea why this would be? The device is properly rooted & have verified root access.
Click to expand...
Click to collapse
Jedi Rom had custom kennel but i dont think that is issue(you can try another rom to see its go though). Like im said before try flash rom with PC Odin or Mobile Odin ( now support our note) or try reflash CWM then try flash rom again.
drunkboi said:
Yes, and CWM. It dosn't seem to be an issue with Recovery. It seems to be having issues flashing the Kernel during installation. It seems to not be allowing access to write it. I have no idea why this would be? The device is properly rooted & have verified root access.
Click to expand...
Click to collapse
Why do you think it is having an issue with the kernel? Did you try a cache wipe or factory reset after it loops?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Why do you think it is having an issue with the kernel? Did you try a cache wipe or factory reset after it loops?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
maybe you should return your phone to stock and start the process over?
xcrazydx said:
Why do you think it is having an issue with the kernel? Did you try a cache wipe or factory reset after it loops?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Because when trying to flash the BLACKSTAR Rom it said unable to access or write boot.img, somthing like that. I've tried both. It still doesn't go past the galaxy note start up screen.
jdiddy_ub said:
maybe you should return your phone to stock and start the process over?
Click to expand...
Click to collapse
Yes, I've done that several times.
simplelife said:
Jedi Rom had custom kennel but i dont think that is issue(you can try another rom to see its go though). Like im said before try flash rom with PC Odin or Mobile Odin ( now support our note) or try reflash CWM then try flash rom again.
Click to expand...
Click to collapse
How do you install custom Roms like Jedi using Odin?
Try flashing the ROM again in cwm..if it gets stuck at the boot screen..extract the boot.img and push the boot.IMG separately after
Sent from my SGH-T889 using Tapatalk 2
drunkboi said:
Because when trying to flash the BLACKSTAR Rom it said unable to access or write boot.img, somthing like that. I've tried both. It still doesn't go past the galaxy note start up screen.
Click to expand...
Click to collapse
Black star? ? Isnt that i717 note 1 ROM bro?
from my Galaxy Note 2!!!
》Jedi Roms 《
---------- Post added at 05:05 PM ---------- Previous post was at 05:04 PM ----------
drunkboi said:
How do you install custom Roms like Jedi using Odin?
Click to expand...
Click to collapse
Which recovery do you have right now... I use twrp and flash constantly with tests and updates...
from my Galaxy Note 2!!!
》Jedi Roms 《
Related
Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
pranjaldixit said:
Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
Click to expand...
Click to collapse
Before installing make backup wipe dalvik cache , cache, do factory reset and try again .. hope it helps
Sent from my Hero using xda premium
Actually I tell the whole story now. When I was making backup of my stock ROM the sd card showed low on space. So I removed that SD card and inserted the one which came with the Phone. On that I installed all the required zip files. Then I made backup of the stock ROM and the data. After that I followed these steps mentioned here -:
http://forum.xda-developers.com/showthread.php?t=1863260
According to the steps I did not did wipe davik cache etc. after instaling the ROM I did wipe factory and data reset and wipe cache partition. After following all the steps mentioned I rebooted my phone as mentioned. But after rebooting the phone is stuck on android logo. I then again went into recovery and tried to wipe dalvik cache the confirmation page that appears before wiping anything is not coming. Also when I tried to restore my phone to the stock ROM an error message is coming. So I am not able to restore to the stock ROM. This is the whole thing. So guys please help. I hope I have not bricked my phone. Any solutions?
Thanks
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Mate I used latest version of ClockWork Mod to install the ROM.
pranjaldixit said:
Mate I used latest version of ClockWork Mod to install the ROM.
Click to expand...
Click to collapse
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
pranjaldixit said:
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
Click to expand...
Click to collapse
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
pranjaldixit said:
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
Click to expand...
Click to collapse
I suggest that you flash your phone to stock rom again via odin..
Then change your recovery,i was preffered px-cwmV2,but i dont know is the link still alive or not..
Flash the recovery,reboot..
Then enter recovery mode again,install rom..
Sent from my GT-S5660 using Tapatalk 2
How to do flash stock ROM as the backup that I made is not working properly.
pranjaldixit said:
How to do flash stock ROM as the backup that I made is not working properly.
Click to expand...
Click to collapse
With odin,
Search ! there are allot of guide howto flash gio to stock with odin
Sent from my HTC Hero using xda app-developers app
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
phreak_or said:
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
Click to expand...
Click to collapse
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
pranjaldixit said:
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
Click to expand...
Click to collapse
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
phreak_or said:
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
Click to expand...
Click to collapse
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
pranjaldixit said:
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
Click to expand...
Click to collapse
yes
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
pranjaldixit said:
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
Click to expand...
Click to collapse
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
voetbalremco said:
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
Click to expand...
Click to collapse
I am not installing firmware right now. I am just wanting to install CWM v2 and try whether it is able to install MIUI successfully or not. If this one also fails then I will install the firmwares via odin. Hope you ate able to understand what I am saying. Please help.
Hi all, I was on AKOP's milestone ROM before trying to flash their newest one. I did not do anything to the kernel or anything by the way.
I'm using ClockworkMod Recovery v6.0.2.7 and I rebooted into recovery and flashed super dark side wipe and then JB-MR1 and then gapps.
I went through the entire start up process with inputting your information and then finally I got into the actual home screen. I clicked around to see how the UI looked and then decided to reboot through the menu.
It was in the rebooting animation icon for at least 30 min before I decided to pull the battery. I want to wipe and start again but my cwm recovery isn't installing anything.
EDIT: The phone still works as I can boot into the phone and use it. I'm trying to reboot now: power button hold>reboot, but its taking ages still...need help on this reboot thanks
Any help here?
EDIT 2: Pretty much phone is "functional" but any method of trying to reboot or reboot into recovery fails
Thanks all!
Check the Md5 hash to make sure it is a good download.
Otherwise it sounds like it is CWM that can be causing issues.
Which version of gapps are you flashing?
8Fishes said:
Check the Md5 hash to make sure it is a good download.
Otherwise it sounds like it is CWM that can be causing issues.
Which version of gapps are you flashing?
Click to expand...
Click to collapse
Checked the Md5 with an app and it matches up perfectly with akop's main website.
I'm running 6.0.2.8 cwm. Is it even possible that its cwm? I used the same version to flash AKOPs new ROM.
and im flashing gapps-jb-20121212-signed.zip
Does it have anything to do with my kernel?
You aren't supposed to use super wipe with cwm 6. That is probably your problem.
meekrawb said:
You aren't supposed to use super wipe with cwm 6. That is probably your problem.
Click to expand...
Click to collapse
Thanks so much for pinpointing the problem! Is there a fix to this?
And is this the recommended method of flashing? (Taken from http://forum.xda-developers.com/showthread.php?t=1926754):
1. Wipe factory data/reset
2. Wipe cache
3. Go into mounts and storage
4. Format /system
5. Format /data
6. Format /cache
7. Enter advanced
8. Wipe dalvik
9. Flash ROM then gapps
10. Reboot and let the ROM settle for 5-10 minutes if flashing TW ROMs, this step is unnecessary for AOSP based ROMs.
11. (Optional) if flashing a new radio flash AFTER the ROM has been initially booted for the first time. No wipes are necessary when flashing a new radio but it HAS to be flashed after the ROM is loaded and settled in. Flashing a radio first and then a ROM has caused issues like the phone not even recognizing there is a network for it. ( phone remains in emergency mode )
Edit:
Pretty sure my phone is bricked now... in a continuous boot up loop... BUT i can still access recovery
Ostyrion said:
Thanks so much for pinpointing the problem! Is there a fix to this?
Edit:
Pretty sure my phone is bricked now... in a continuous boot up loop... BUT i can still access recovery
Click to expand...
Click to collapse
Yes, those are the proper flashing instructions for CWM6.
It sounds like you have a soft brick. I think your best bet is to Odin back to stock. Have a look here:
http://forum.xda-developers.com/showthread.php?t=1858435
Good luck.
meekrawb said:
Yes, those are the proper flashing instructions for CWM6.
It sounds like you have a soft brick. I think your best bet is to Odin back to stock. Have a look here:
http://forum.xda-developers.com/showthread.php?t=1858435
Good luck.
Click to expand...
Click to collapse
You sir are a saving grace!
I'll try this at once!!
I have 2 questions though.
1. in regard to kernels. Do i need to do anything (aka change my kernel?) Or is the stock kernel suitable for 4.2.1?
2. If i cant boot into my phone to get to my SD card, how do i download and put files onto my phone?
Ostyrion said:
You sir are a saving grace!
I'll try this at once!!
I have 2 questions though.
1. in regard to kernels. Do i need to do anything (aka change my kernel?) Or is the stock kernel suitable for 4.2.1?
2. If i cant boot into my phone to get to my SD card, how do i download and put files onto my phone?
Click to expand...
Click to collapse
Stock kernel is just fine.
Odin will flash the stock OS to your phone from the computer. Make sure to read the Odin directions a few times before trying it because it could hard brick if something goes wrong.
meekrawb said:
Stock kernel is just fine.
Odin will flash the stock OS to your phone from the computer. Make sure to read the Odin directions a few times before trying it because it could hard brick if something goes wrong.
Click to expand...
Click to collapse
I'm trying to read through the thread you gave me but its kinda cluttered and its hard finding exactly where to start...pointers?
From the first post of that thread you will need
1. The prerequisites
-Odin
-Drivers
-Kies(dunno if this is mandatory but I guess it couldn't hurt.)
2. T-Mobile t989 uvlhi stock ROM(Odin)
You will need some type of zip software to extract the files from this.
3. Follow the steps under Installation - Odin installation(skip step 1)
After you get the stock ROM running you can install custom recovery and then flash your custom ROMs.
meekrawb said:
From the first post of that thread you will need
1. The prerequisites
-Odin
-Drivers
-Kies(dunno if this is mandatory but I guess it couldn't hurt.)
2. T-Mobile t989 uvlhi stock ROM(Odin)
You will need some type of zip software to extract the files from this.
3. Follow the steps under Installation - Odin installation(skip step 1)
After you get the stock ROM running you can install custom recovery and then flash your custom ROMs.
Click to expand...
Click to collapse
IT WORKS!!!! I LOVE YOU!! THANK YOU SO SO SO SO SO MUCH!!
THANK YOU THANK YOU THANK YOU!!
So now that I'm back on stock ROM, is my phone still rooted? Or do i need to reroot?
Edit: Downloaded a root checker. Looks like I need to reroot. Thank you again SOOOOO much!!!
Ostyrion said:
IT WORKS!!!! I LOVE YOU!! THANK YOU SO SO SO SO SO MUCH!!
THANK YOU THANK YOU THANK YOU!!
So now that I'm back on stock ROM, is my phone still rooted? Or do i need to reroot?
Click to expand...
Click to collapse
You are welcome. You are now unrooted so you have to download the recovery of your choice to the internal SD card and flash it from the stock recovery. After you reboot back into recovery you can flash a ROM and you will be rooted.
meekrawb said:
You are welcome. You are now unrooted so you have to download the recovery of your choice to the internal SD card and flash it from the stock recovery. After you reboot back into recovery you can flash a ROM and you will be rooted.
Click to expand...
Click to collapse
So in essence, once i have cwm/twrp on my phone, i have "root"?
Just to check:
1. download cwm recovery
2. via usb put onto phone.
3. reboot into recovery
4. flash cwm
5. restart phone
6. copy AOKP ROM onto phone
7. reboot into recovery
8. flash AOKP ROM?
Again, i cant thank you enough!
Ostyrion said:
So in essence, once i have cwm/twrp on my phone, i have "root"?
Just to check:
1. download cwm recovery
2. via usb put onto phone.
3. reboot into recovery
4. flash cwm
5. restart phone
6. copy AOKP ROM onto phone
7. reboot into recovery
8. flash AOKP ROM?
Again, i cant thank you enough!
Click to expand...
Click to collapse
That should do it. You won't be rooted until you install a custom ROM though(they come already rooted).
meekrawb said:
That should do it. You won't be rooted until you install a custom ROM though(they come already rooted).
Click to expand...
Click to collapse
Apparently stock recovery doesn't allow to install via internal SD card so I need odin to flash cwm dont i?
What boxes do i need checked besides the PDA checkbox?
Ostyrion said:
Apparently stock recovery doesn't allow to install via internal SD card so I need odin to flash cwm dont i?
What boxes do i need checked besides the PDA checkbox?
Click to expand...
Click to collapse
If you download the flashable zip from the first post here:
http://forum.xda-developers.com/showthread.php?p=30497342
you should be able to flash it from stock recovery. If it doesn't work I will have to look up how to install it with Odin.
meekrawb said:
If you download the flashable zip from the first post here:
http://forum.xda-developers.com/showthread.php?p=30497342
you should be able to flash it from stock recovery. If it doesn't work I will have to look up how to install it with Odin.
Click to expand...
Click to collapse
I actually got cwm 5.0.2.7 on my phone through odin. I just need root now to upgrade it to the most recent version.
I've been seeing busybox paired with superuser.
Do i need busybox? Or can i just flash superuser through cwm recovery 5.0.2.7?
Ostyrion said:
I actually got cwm 5.0.2.7 on my phone through odin. I just need root now to upgrade it to the most recent version.
I've been seeing busybox paired with superuser.
Do i need busybox? Or can i just flash superuser through cwm recovery 5.0.2.7?
Click to expand...
Click to collapse
Why do you need root? You should be able to just flash the newer cwm zip.
Here is a superuser zip that I used successfully on my t989:
meekrawb said:
Here is a superuser zip that I used successfully on my t989:
Click to expand...
Click to collapse
Thanks for the file!
I downloaded cwm from this site:
http://www.clockworkmod.com/rommanager
but it comes as an img file...and I dont seem to be able to flash that from recovery
hmmm, i have weird problem here, i just installed CWM 6.0.2.8 on my phone, in first using it working perceftly but then it doesn't work, please help me solve this problem, it's very annoying
or can somebody give me link the latest flashable CWM for ace 2
thanks before
thanks button awaiting
dv6661 said:
hmmm, i have weird problem here, i just installed CWM 6.0.2.8 on my phone, in first using it working perceftly but then it doesn't work, please help me solve this problem, it's very annoying
or can somebody give me link the latest flashable CWM for ace 2
thanks before
thanks button awaiting
Click to expand...
Click to collapse
What problem?
Sent from my GT-I8160 using Tapatalk
teddytsen said:
What problem?
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
the problem is " CWM is not working after first flashing"
can you give me the link of latest flashable CWM for galaxy Ace 2, please
thanks before
The CWM you flashed is a temporary one.
When you restart the phone into recovery, it goes into the original Samsung recovery, right? If so, then just re-flash the CWM. You'll need to do this every time to go into CWM.
qyx said:
The CWM you flashed is a temporary one.
When you restart the phone into recovery, it goes into the original Samsung recovery, right? If so, then just re-flash the CWM. You'll need to do this every time to go into CWM.
Click to expand...
Click to collapse
yeah i'm know that, but when im enter CWM not loaded, what version do you use ? give me please
I use the one from here: http://forum.xda-developers.com/showthread.php?t=2141395
(that thread says version 6.0.2.8, but when I run it it says 6.0.4.5)
I do not understand what you mean by "when im enter CWM not loaded". You need to flash the zip every time you want to run CWM, like you did the first time - somebody should correct me if I'm wrong.
qyx said:
I use the one from here: http://forum.xda-developers.com/showthread.php?t=2141395
(that thread says version 6.0.2.8, but when I run it it says 6.0.4.5)
I do not understand what you mean by "when im enter CWM not loaded". You need to flash the zip every time you want to run CWM, like you did the first time - somebody should correct me if I'm wrong.
Click to expand...
Click to collapse
okay i'll try it later
thanks for try to help , problem is when im get in to samsung recovery and flash temporary CWM recovery, it won't loaded, just black screen and then my phone restart.
what ROM do you use ?
when I was in stock MF1 I installed 6.0.2.8 (Shaaan thread, TY BTW) and it was temporary.
Then I flashed CM10.2 which installed me a new version of CWM (6.0.4.6) which is now persistent.
Can you develop a little bit more about your software configuration please ? ROM ? kernel ?
I have a similar problem. After i flashed cm 10.1 recovery dissapeared. I don't have cwm neither stock recovery. Any way to flash it via odin?
manthes said:
I have a similar problem. After i flashed cm 10.1 recovery dissapeared. I don't have cwm neither stock recovery. Any way to flash it via odin?
Click to expand...
Click to collapse
backup
flash stock via odin
flash cm10.1/gapps
try again see if recovery is there :/
i know this solution but i can't do the same thing every time i loose cwm because it worked before. Thats why i asked if it is possible to flash only cwm
manthes said:
i know this solution but i can't do the same thing every time i loose cwm because it worked before. Thats why i asked if it is possible to flash only cwm
Click to expand...
Click to collapse
no cwm odin flashable for us, sorry
The problem is with custom roms and my screen driver s6d.
Unfortunately only with stock rom everything is working fine
Hi everyone!
I have just bought a Galaxy Tab 3 Lite (SM-T110). and I had flashed TWRP and rooted it, HOWEVER, after I tried to boot into recovery using "Quick Boot", the system keeps going into Recovery no matter what.
I have tried to use Odin to reflash the recovery, and I have tried to flash a different custom ROM (StockRom-V1.1-T110) using recovery, but whenever it reboots, it just goes straight to recovery.....
How can I fix this?
Please help!
ah_hin said:
Hi everyone!
I have just bought a Galaxy Tab 3 Lite (SM-T110). and I had flashed TWRP and rooted it, HOWEVER, after I tried to boot into recovery using "Quick Boot", the system keeps going into Recovery no matter what.
I have tried to use Odin to reflash the recovery, and I have tried to flash a different custom ROM (StockRom-V1.1-T110) using recovery, but whenever it reboots, it just goes straight to recovery.....
How can I fix this?
Please help!
Click to expand...
Click to collapse
reflash your kernel, and get rid of quick boot. find a dead simple reboot widget.
m
moonbutt74 said:
reflash your kernel, and get rid of quick boot. find a dead simple reboot widget.
m
Click to expand...
Click to collapse
I am in this loop too! I am a n00b.. can you pl let me know how to reflash kernel on the T110?
Help
rajmisc said:
I am in this loop too! I am a n00b.. can you pl let me know how to reflash kernel on the T110?
Click to expand...
Click to collapse
I am also a noob and I turned it off and it keeps going into recovery. I have a t110.
rajmisc said:
I am in this loop too! I am a n00b.. can you pl let me know how to reflash kernel on the T110?
Click to expand...
Click to collapse
erikaj28 said:
I am also a noob and I turned it off and it keeps going into recovery. I have a t110.
Click to expand...
Click to collapse
I didn't know how to just flash the kernal, so I flash the stock firmware with odin.
and everything works now.
download THIS
and extract the file, and use odin to flash it, doesn't take that long, but all the apps and settings will be reset.
To install stock firmware, go to this THREAD, and watch "GALAXY TAB 3 UNBRICK AND RESTORE", great tutorial by Rootjunky
ah_hin said:
I didn't know how to just flash the kernal, so I flash the stock firmware with odin.
and everything works now.
download THIS
and extract the file, and use odin to flash it, doesn't take that long, but all the apps and settings will be reset.
To install stock firmware, go to this THREAD, and watch "GALAXY TAB 3 UNBRICK AND RESTORE", great tutorial by Rootjunky
Click to expand...
Click to collapse
Awesome! Thanks a ton!
Flash Files For Tab 3 Kids HELP
I flashed the proper and updated files followed the video with rootjunky however i cant boot system just keeps going into recovery .. i made a backup but will it restore a backup from the moment after i flashed already ?
i have the kids mode Tab , HELP before KIDS get home lol
is The Tab 3 for kids supported , i just tried it on this yellow thing and now i have a dead banana lol
RK KINGKONG said:
I flashed the proper and updated files followed the video with rootjunky however i cant boot system just keeps going into recovery .. i made a backup but will it restore a backup from the moment after i flashed already ?
i have the kids mode Tab , HELP before KIDS get home lol
is The Tab 3 for kids supported , i just tried it on this yellow thing and now i have a dead banana lol
Click to expand...
Click to collapse
did you use the firmware that I linked to? you might have to find the version for the kid version, because the firmware I linked to is for the Tab 3 lite.
Sent from Sony ZL
how do i flash the full stock rom
ah_hin said:
did you use the firmware that I linked to? you might have to find the version for the kid version, because the firmware I linked to is for the Tab 3 lite.
Sent from Sony ZL
Click to expand...
Click to collapse
i got confused and tried using T-210 on T-2105 I can only boot to recovery or download
i just downloaded T2105UEAMI5_T2105XARAMI5_XAR stock firmware US i hope this is it but when i go to odin it wont find file , do i have to extract from zip ? but theres another file called SS_DL.dll so im not sure now
RK KINGKONG said:
i got confused and tried using T-210 on T-2105 I can only boot to recovery or download
i just downloaded T2105UEAMI5_T2105XARAMI5_XAR stock firmware US i hope this is it but when i go to odin it wont find file , do i have to extract from zip ? but theres another file called SS_DL.dll so im not sure now
Click to expand...
Click to collapse
Extract it. Odin needs ...tar.md5 files.
Sent from my SCH-I605
gr8nole said:
Extract it. Odin needs ...tar.md5 files.
Sent from my SCH-I605
Click to expand...
Click to collapse
got you and thank you for your time .. now does this other file even matter usually they dont come in these tar zips
SS_DL.dll whats that for
Same situation. I rooted it fine. Installed a custom rom. No issues. Then it asked to update the supersu binary. Did that and now it keeps booting into TWRP no matter what I do. Gonna start fresh and this time I'll not use TWRP to update the binary I guess.
To fix the booting in recovery
flash stock recovery with oodin
now go to stock recovery
select clear cache
it will show error (and recovery crashes) and tab will boot normally.
Hello everyone .
I have problems installing CWM on my phone , i tried everything on this thread " http://forum.xda-developers.com/showthread.php?t=2445480 " and it would never work for me
I keep getting pass on ODIN but it keep reboot back into normal Android not recovery mode
What do it do , and please keep in mind that i am too noob with all the hard words for rooting and flashing stuff , so please explain to me what should i do
Thanks in advance .
.Hell. said:
Hello everyone .
I have problems installing CWM on my phone , i tried everything on this thread " http://forum.xda-developers.com/showthread.php?t=2445480 " and it would never work for me
I keep getting pass on ODIN but it keep reboot back into normal Android not recovery mode
What do it do , and please keep in mind that i am too noob with all the hard words for rooting and flashing stuff , so please explain to me what should i do
Thanks in advance .
Click to expand...
Click to collapse
Kitkat overwrites recovery on every reboot. So here is the solution:
When you flash cwm via ODIN, untick the auto-reboot option. Let the odin flash the file and wait for pass message.
Now reboot directly to recovery (not to phone). You will be in cwm. From there you can reboot to your phone.
Now power off your phone and see if you have a cwm recovery.
Press thumps up if you found this suggestion helpful.
ceomaverick said:
Kitkat overwrites recovery on every reboot. So here is the solution:
When you flash cwm via ODIN, untick the auto-reboot option. Let the odin flash the file and wait for pass message.
Now reboot directly to recovery (not to phone). You will be in cwm. From there you can reboot to your phone.
Now power off your phone and see if you have a cwm recovery.
Press thumps up if you found this suggestion helpful.
Click to expand...
Click to collapse
I have did what you just told me and still nothing happened and got back into normal ROM with no custom recovery , and i am on Android 4.3 i think that is jellybean not kitkat
.Hell. said:
I have did what you just told me and still nothing happened and got back into normal ROM with no custom recovery , and i am on Android 4.3 i think that is jellybean not kitkat
Click to expand...
Click to collapse
Well that is certainly weird. Are you sure you are using correct cwm file. Can you put the link of cwm file you are using?
ceomaverick said:
Well that is certainly weird. Are you sure you are using correct cwm file. Can you put the link of cwm file you are using?
Click to expand...
Click to collapse
Well i tried 3 Philz recovery files and nothing worked and here they are :
http://d-h.st/OIX
http://d-h.st/IVq
http://forum.xda-developers.com/showpost.php?p=53488494
if you have any detailed way to do it with links you can help me by posting them and i will also try your way
.Hell. said:
Well i tried 3 Philz recovery files and nothing worked and here they are :
http://d-h.st/OIX
http://d-h.st/IVq
http://forum.xda-developers.com/showpost.php?p=53488494
if you have any detailed way to do it with links you can help me by posting them and i will also try your way
Click to expand...
Click to collapse
Try this one:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.48.4-n7100.zip.md5
I hope your note is 7100 not 7105.
ceomaverick said:
Try this one:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.48.4-n7100.zip.md5
I hope your note is 7100 not 7105.
Click to expand...
Click to collapse
Hello , Yes my device is N7100 and i am currently on 4.3 Jellybean and i have tried your recovery file with no success still i don't know why D=
Hello , excuse me for a stupid question , but ... is your note 2 rooted ?
gb61 said:
Hello , excuse me for a stupid question , but ... is your note 2 rooted ?
Click to expand...
Click to collapse
No its not i just got it so i was trying to install CWM for the first time then root it and maybe install a custom ROM later
.Hell. said:
No its not i just got it so i was trying to install CWM for the first time then root it and maybe install a custom ROM later
Click to expand...
Click to collapse
Ok, here is the problem , you must root your phone first and after you can install a recovery like Philz or TWRP.
gb61 said:
Ok, here is the problem , you must root your phone first and after you can install a recovery like Philz or TWRP.
Click to expand...
Click to collapse
I am trying to do everything here on this thread and the first thing he said is that i need to have CWM Recovery first installed before rooting or doing anything
http://forum.xda-developers.com/showthread.php?t=2445480
.Hell. said:
I am trying to do everything here on this thread and the first thing he said is that i need to have CWM Recovery first installed before rooting or doing anything
http://forum.xda-developers.com/showthread.php?t=2445480
Click to expand...
Click to collapse
A custom recovery is necessary to install a custom rom but you can rooted your phone with Odin PC and CF-Auto-Root-t03g-t03gxx-gtn7100.zip
For example there is an explanation here :http://www.ibtimes.co.uk/galaxy-note2-n7100-root-android43-xxuemk4-jellybean-523833.
You can find others in google with search "how to root samsung galaxy note 2" .
The most important before installing is to copy your important folder to your PC.
I hope that can help you.
Excuse me for my english
---------- Post added at 05:01 PM ---------- Previous post was at 04:53 PM ----------
Other link in XDA it's seems more clear : http://forum.xda-developers.com/showthread.php?t=2143479
Okay guys i have installed Root on my phone using these two threads
http://forum.xda-developers.com/showthread.php?t=2143479
http://forum.xda-developers.com/showthread.php?t=2618261
Now what i should do actually because my problem still remain , that i cant install CWM and it keep reboot into Android not Recovery and i have tried all the methods but nothing works for me so far still
Okay guys thank you for your help , and for anyone who have my problem i used mobile odin to flash CWM