Stuck in android intro - Galaxy Tab S Q&A, Help & Troubleshooting

I just opened my twrp recovery to wipe everything off after I did so I rebooted to system twrp asked me wether to instal supersu or not I permitted it . When I tried to reboot to system all I does is shows Samsung Galaxy tab s powered by android and does not go any further . I tried clearing the cache but nothing works
device smt805
Rooted
I can boot into recovery if needed .just need proper guidance
I have stock rom
Lollipop 5.0.2

Sounds like you wiped your system as well. If so, you need to return to stock with the Kies3 software from Samsung or download and flash a rom for your device.
Sent from my SM-T700 using Tapatalk

Did you wipe system?
Just restore your nandroid backup.

ashyx said:
Did you wipe system?
Just restore your nandroid backup.
Click to expand...
Click to collapse
I didn't have any backup and yes I guess I wiped out my system

noxarcana said:
Sounds like you wiped your system as well. If so, you need to return to stock with the Kies3 software from Samsung or download and flash a rom for your device.
Sent from my SM-T700 using Tapatalk
Click to expand...
Click to collapse
Any method without using a computer

qwderhc said:
I didn't have any backup and yes I guess I wiped out my system
Click to expand...
Click to collapse
There you have download stock frimware and flash it with odin

qwderhc said:
I didn't have any backup and yes I guess I wiped out my system
Click to expand...
Click to collapse
No backup, really?
You will need to flash stock firmware with odin or a custom rom with twrp.

ashyx said:
No backup, really?
You will need to flash stock firmware with odin or a custom rom with twrp.
Click to expand...
Click to collapse
Yes, I've searched for the rom but how do I use twrp for it I can open it still but how to flash Phoenix rom with it

qwderhc said:
Yes, I've searched for the rom but how do I use twrp for it I can open it still but how to flash Phoenix rom with it
Click to expand...
Click to collapse
You need to select install in twrp then select the zip.
I also highly suggest you make a full back up with TWRP.

Related

[Q] Stuck on Android Logo

Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
pranjaldixit said:
Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
Click to expand...
Click to collapse
Before installing make backup wipe dalvik cache , cache, do factory reset and try again .. hope it helps
Sent from my Hero using xda premium
Actually I tell the whole story now. When I was making backup of my stock ROM the sd card showed low on space. So I removed that SD card and inserted the one which came with the Phone. On that I installed all the required zip files. Then I made backup of the stock ROM and the data. After that I followed these steps mentioned here -:
http://forum.xda-developers.com/showthread.php?t=1863260
According to the steps I did not did wipe davik cache etc. after instaling the ROM I did wipe factory and data reset and wipe cache partition. After following all the steps mentioned I rebooted my phone as mentioned. But after rebooting the phone is stuck on android logo. I then again went into recovery and tried to wipe dalvik cache the confirmation page that appears before wiping anything is not coming. Also when I tried to restore my phone to the stock ROM an error message is coming. So I am not able to restore to the stock ROM. This is the whole thing. So guys please help. I hope I have not bricked my phone. Any solutions?
Thanks
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Mate I used latest version of ClockWork Mod to install the ROM.
pranjaldixit said:
Mate I used latest version of ClockWork Mod to install the ROM.
Click to expand...
Click to collapse
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
pranjaldixit said:
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
Click to expand...
Click to collapse
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
pranjaldixit said:
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
Click to expand...
Click to collapse
I suggest that you flash your phone to stock rom again via odin..
Then change your recovery,i was preffered px-cwmV2,but i dont know is the link still alive or not..
Flash the recovery,reboot..
Then enter recovery mode again,install rom..
Sent from my GT-S5660 using Tapatalk 2
How to do flash stock ROM as the backup that I made is not working properly.
pranjaldixit said:
How to do flash stock ROM as the backup that I made is not working properly.
Click to expand...
Click to collapse
With odin,
Search ! there are allot of guide howto flash gio to stock with odin
Sent from my HTC Hero using xda app-developers app
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
phreak_or said:
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
Click to expand...
Click to collapse
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
pranjaldixit said:
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
Click to expand...
Click to collapse
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
phreak_or said:
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
Click to expand...
Click to collapse
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
pranjaldixit said:
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
Click to expand...
Click to collapse
yes
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
pranjaldixit said:
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
Click to expand...
Click to collapse
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
voetbalremco said:
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
Click to expand...
Click to collapse
I am not installing firmware right now. I am just wanting to install CWM v2 and try whether it is able to install MIUI successfully or not. If this one also fails then I will install the firmwares via odin. Hope you ate able to understand what I am saying. Please help.

Flash help

I am going to flash a new AOSP on my tab using twrp but i do not have a sd card so if i do a full wipe i will have nothing left to flash because i will loose the files .
I am currebtly using phoenix rom and i am going to flash android m rom so should k flash the rom without a full wipe
MY DEVICE: GALAXY TAB S 10.5 (SM-T805)
Why do you need an sd card?
Just backup to internal storage, no need to full wipe either. Just wipe data that is enough or try and dirty flash first.
Can i choose files from backup
Ashyx ols could u give me step by step instructions i am still a noob
Gea0501686 said:
Ashyx ols could u give me step by step instructions i am still a noob
Click to expand...
Click to collapse
All you need do is install twrp and then boot to recovery. Make a full backup(backup will automatically be stored on your device storage).
Install the zip using twrp.
That's it.
If you have issues when booting just go back into recovery and wipe data only then reboot.
I did what u said but it seems there is a problem i downloaded the right files but twrp says that it is for chagglewifi that is smt800 not for chaggalte . I re downloaded it but the error presisits
Idk what to do now a little light
It says it is for smt800 not t805 help the files are right i downloaded it 3 times
ashyx said:
All you need do is install twrp and then boot to recovery. Make a full backup(backup will automatically be stored on your device storage).
Install the zip using twrp.
That's it.
If you have issues when booting just go back into recovery and wipe data only then reboot.
Click to expand...
Click to collapse
Ashyx help plzzz
Gea0501686 said:
Ashyx help plzzz
Click to expand...
Click to collapse
Where did you download twrp from?
Do you have a t800 or t805?
I got it just updated my twrp
ashyx said:
Where did you download twrp from?
Do you have a t800 or t805?
Click to expand...
Click to collapse
Could u suggest me the best ROM for smt805
Gea0501686 said:
Could u suggest me the best ROM for smt805
Click to expand...
Click to collapse
This is the best for me: http://forum.xda-developers.com/showthread.php?t=3222264

not able to get twrp in my oneplus 3

i flashed the twrp garak using fastboot once i booted into twrp but when i returned using advanced reboot bam! stock recovery is back ..how to fix it guys i want twrp
Go to fastboot mode and reflash the twrp recovery.
CyberCaptainKaz said:
Go to fastboot mode and reflash the twrp recovery.
Click to expand...
Click to collapse
i tried bro but after rebooting my device when i boot into recovery it again changes into oxygen recovery
try to force decryption and then re-flash it again. It's easiest if you use the OnePlus toolkit available here: http://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
I was having the same issue after going back to official OOS and wanting to switch over to my current rom which gave me issues since I didn't have modified TWRP.
The_Symbiote said:
try to force decryption and then re-flash it again. It's easiest if you use the OnePlus toolkit available here: http://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
I was having the same issue after going back to official OOS and wanting to switch over to my current rom which gave me issues since I didn't have modified TWRP.
Click to expand...
Click to collapse
will it wipe everything means apps,internal storage ?
kriss singhania said:
will it wipe everything means apps,internal storage ?
Click to expand...
Click to collapse
Yes it will. The toolkit will allow you to perform a full backup that you can restore later.
You can try flashing twrp from the toolkit, to see if it works. In my experience it didn't work until I forced decryption.
Try:
1. Fastboot erase recovery
2. Fastboot flash recovery "TWRP"
Puddi_Puddin said:
Try:
1. Fastboot erase recovery
2. Fastboot flash recovery "TWRP"
Click to expand...
Click to collapse
sure I'll try it
kriss singhania said:
sure I'll try it
Click to expand...
Click to collapse
it worked bro I'm rooted and installed twrp..thnx
Damn, this helped me out as well.
I think you are using the community build?

Help me disable encrypted

Now my phone is encrypted. I want to disable encrypted
Show me how to do it
I use android Nougat 7.1
Flash TWRP again
krzysiekb92 said:
Flash TWRP again
Click to expand...
Click to collapse
Please show me in more detail
Download official TWRP using mobile app from Play Store. Reboot your phone to TWRP, choose Install then Install IMG. Point downloaded TWRP, wait for finish and reboot TWRP. After it you can reboot to system.
krzysiekb92 said:
Download official TWRP using mobile app from Play Store. Reboot your phone to TWRP, choose Install then Install IMG. Point downloaded TWRP, wait for finish and reboot TWRP. After it you can reboot to system.
Click to expand...
Click to collapse
I try to flash recovery img in twrp 2 times
But it's not working
Please help me
krzysiekb92 said:
Flash TWRP again
Click to expand...
Click to collapse
You're not gonna lose any data on storage when it decrypts?
No, I've got everything as before.
ermacwins said:
You're not gonna lose any data on storage when it decrypts?
Click to expand...
Click to collapse
krzysiekb92 said:
No, I've got everything as before.
Click to expand...
Click to collapse
I flash rom and then I wipe data & factory reset in twrp
And it's work but lost all data
Shockmouse said:
I flash rom and then I wipe data & factory reset in twrp
And it's work but lost all data
Click to expand...
Click to collapse
I had encryption but after flashing official TWRP everything is as it should. Now I don't have encrypted device.
Flashed twrp and its still encrypted

Can anyone help me unbrick my moto z2 play

Anyone available to assist?
bootloader is unlocked.
BL:C0.CD
i can boot into TWRP that is about it.
Can't boot into OS?
Mark2014 said:
Can't boot into OS?
Click to expand...
Click to collapse
correct
nflnetwork29 said:
correct
Click to expand...
Click to collapse
if u have any rom backup, just restore it.
If not, download the rom below,
https://forum.xda-developers.com/z2-play/development/rom-firehound-v4-6-1-moto-z2-play-t3811949
copy it into your sdcard
and than flash it via TWRP.
tried that got error 255
nflnetwork29 said:
tried that got error 255
Click to expand...
Click to collapse
What did you do?
Try upgrade TWRP to newest version.
Mark2014 said:
What did you do?
Try upgrade TWRP to newest version.
Click to expand...
Click to collapse
I am running TWRP version 3.2.3-0 which is latest verison
nflnetwork29 said:
I am running TWRP version 3.2.3-0 which is latest verison
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=1322778262904007189
Try wiping the entire device (DON'T wipe recovery/bootloader if even possible), then try to flash that ROM again...
nflnetwork29 said:
I am running TWRP version 3.2.3-0 which is latest verison
Click to expand...
Click to collapse
Try another TWRP version with 64bit
https://forum.xda-developers.com/z2-play/development/twrp-moto-z2-play-t3729531
Good luck.
i used
twrp_albus_treble_3.2.2_r23_64.img
Now i receive ERROR 7
Dubstepwolf123 said:
Try wiping the entire device (DON'T wipe recovery/bootloader if even possible), then try to flash that ROM again...
Click to expand...
Click to collapse
can you share the step by step ?
Using TWRP i am assuming ?
nflnetwork29 said:
can you share the step by step ?
Using TWRP i am assuming ?
Click to expand...
Click to collapse
I AM NOT RESPONSIBLE FOR ANYTHING THAT MIGHT BREAK
Yes in TWRP...
1) Enter TWRP
2) Press Wipe
3) Select "Dalvik, Cache, Data, System, Internal Storage"
4) Swipe the slider
5) Then try flashing the ROM
Dubstepwolf123 said:
Try wiping the entire device (DON'T wipe recovery/bootloader if even possible), then try to flash that ROM again...
Click to expand...
Click to collapse
Dubstepwolf123 said:
I AM NOT RESPONSIBLE FOR ANYTHING THAT MIGHT BREAK
Yes in TWRP...
1) Enter TWRP
2) Press Wipe
3) Select "Dalvik, Cache, Data, System, Internal Storage"
4) Swipe the slider
5) Then try flashing the ROM
Click to expand...
Click to collapse
Tried that still getting ERROR 7
nflnetwork29 said:
i used
twrp_albus_treble_3.2.2_r23_64.img
Now i receive ERROR 7
Click to expand...
Click to collapse
Do not use treble. Use r12 or r18 pls
https://drive.google.com/drive/folders/1NP4IQo4SkV8jz_93QK-r1qV6RwbrSE4i
still getting "Updater process ended with ERROR: 7"
I tried r12 & r18
Are you from original rom?
Mark2014 said:
Are you from original rom?
Click to expand...
Click to collapse
i upgraded phone to oreo some time ago and unlocked.
nflnetwork29 said:
i upgraded phone to oreo some time ago and unlocked.
Click to expand...
Click to collapse
try to flash another rom:
https://forum.xda-developers.com/z2-play/development/rom-pixel-experience-t3859477
nflnetwork29 said:
Anyone available to assist?
bootloader is unlocked.
BL:C0.CD
i can boot into TWRP that is about it.
Click to expand...
Click to collapse
Boot into recovery, wipe internal storage, dalvik, cache, sdcard, etc (just tick everything... don't worry, u won't wipe ur recovery)
Then connect to PC, copy over any ROM made for the Z2 Play (I use the Pixel Experience ROM for Albus)
Flash, wipe cache/dalvik, then reboot into system
Should be working...

Categories

Resources