[HELP] Unbrick HTC One X - HTC One X

Hey guys,
I need help unbricking my HTC One X. I was trying to set up CM11 on it but I used CWM Recovery 5.0.8 instead of 6.0.4 that it requires. I managed to remove the stock OS and now it only loads bootloader or cwm recovery.
I downloaded the stock ROM and I'm now trying to install that via recovery. This is what I've been trying to send the file to the HOX -
I've been trying to use ADB to transfer files to the device but the device can't be found (List of devices shows up blank). However, it shows up in fastboot.
I tried connecting a USB OTG to it but I can't seem to find any option to install from external USB. I tried to mount USB but it gives me an error - E:Unable to open ums lunfile.
I tried running an RUU but that didn't work either.
I'm thinking that once I can see the stock ROM file through CWM recovery, it should be easy enough to install that. So what should I be doing to get the file onto the HOX or what other approach can I use?
Will help me out a lot!
Thanks!

ankeetguha said:
Hey guys,
I need help unbricking my HTC One X. I was trying to set up CM11 on it but I used CWM Recovery 5.0.8 instead of 6.0.4 that it requires. I managed to remove the stock OS and now it only loads bootloader or cwm recovery.
I downloaded the stock ROM and I'm now trying to install that via recovery. This is what I've been trying to send the file to the HOX -
I've been trying to use ADB to transfer files to the device but the device can't be found (List of devices shows up blank). However, it shows up in fastboot.
I tried connecting a USB OTG to it but I can't seem to find any option to install from external USB. I tried to mount USB but it gives me an error - E:Unable to open ums lunfile.
I tried running an RUU but that didn't work either.
I'm thinking that once I can see the stock ROM file through CWM recovery, it should be easy enough to install that. So what should I be doing to get the file onto the HOX or what other approach can I use?
Will help me out a lot!
Thanks!
Click to expand...
Click to collapse
Flash Philz 5.15.9 recovery after this go in recovery mount sd card and copy what you need to your sd card and inastall what you want. And if you want to install CMM11 copy the files to your sd card and after this flash CWM 6.0.4.8 and install CM11

Thant said:
Flash Philz 5.15.9 recovery after this go in recovery mount sd card and copy what you need to your sd card and inastall what you want. And if you want to install CMM11 copy the files to your sd card and after this flash CWM 6.0.4.8 and install CM11
Click to expand...
Click to collapse
Thanks a ton! I managed to flash CWM 6.0.4.8 on it and then I installed CM11 and then the GAPPS. The installation went through fine and I can finally see the CM load screen. However, I think I'm stuck in some sort of bootloop since it doesn't seem to get past the loading screen.
Any ideas on how to fix this? Things are looking up!

ankeetguha said:
Thanks a ton! I managed to flash CWM 6.0.4.8 on it and then I installed CM11 and then the GAPPS. The installation went through fine and I can finally see the CM load screen. However, I think I'm stuck in some sort of bootloop since it doesn't seem to get past the loading screen.
Any ideas on how to fix this? Things are looking up!
Click to expand...
Click to collapse
Did you flash the boot .img from fastboot

paulh1978 said:
Did you flash the boot .img from fastboot
Click to expand...
Click to collapse
Oh man that's what I missed! Thanks so much, was working on this for hours.
Incredible

ankeetguha said:
Oh man that's what I missed! Thanks so much, was working on this for hours.
Incredible
Click to expand...
Click to collapse
No worries have fun.

Related

CWM wont find zip

Hey guys
I wanted to update my rom before, never had any problems in the past. I have flashed many roms.
I flashed a new hboot (cm7r1, worked fine) but when i go to CWM to select the rom zip, no files are found.
I have re formatted my sd etc, the computer see's the zip file but the phone wont
Anyone?
Thanks
Do you search for zip via normal flash from SD card or via the update.zip-method?
Have you tried re-flashing CWM via ROM Manager ?
MrUrgit said:
Have you tried re-flashing CWM via ROM Manager ?
Click to expand...
Click to collapse
@OP: DO NOT USE ROM MANAGER! It's a horrible software which causes more problems than it solves.
A re-flash might help, but then do it via fastboot (according to your signature you are S-OFF, so you can use fastboot).
thanks guys
managed to sort it by wiping the sd through cwm
getting a new 16gb card today anyway
thanks for the help

[Q] Can't boot after failed root attempt

SOLVED
So today I decided I would try to install a custom OS/ROM whatever it's called on my HTC One X. I unlocked the bootloader successfully without any problems. Then I went on to root the phone, and this is where it all went wrong. I found a tutorial and followed it to the tiniest detail. I am unable to link to it because I am a new user. When my phone rebooted it went to the "HTC Quietly Brilliant" boot screen. I left it there for 30 minutes and it still didn't move on. What do I do now? I am a super noob at this, and I admit that I am an idiot for not reading more up on it first, it just all seems so super complicated.
Thanks in advance for any help and guidance.
well, pm me the link so i can check the instructions you followed and maybe help you
lukes91 said:
well, pm me the link so i can check the instructions you followed and maybe help you
Click to expand...
Click to collapse
I sent you the link. Thanks for your help.
http://rootmyandroid.org/root-htc-one-x-windows-linux-mac-osx.html
Here is the link, so everybody can help you.
Sent from Somewhere Over The Rainbow...
---------- Post added at 08:17 PM ---------- Previous post was at 07:28 PM ----------
so it hanged just after you run the script to root device, right? after you ran the script in the shell, did it return any error?
lukes91 said:
http://rootmyandroid.org/root-htc-one-x-windows-linux-mac-osx.html
Here is the link, so everybody can help you.
Sent from Somewhere Over The Rainbow...
---------- Post added at 08:17 PM ---------- Previous post was at 07:28 PM ----------
so it hanged just after you run the script to root device, right? after you ran the script in the shell, did it return any error?
Click to expand...
Click to collapse
No, no error, it said "Daemon launched successfully" or something along those lines, my phone turned off and turned back on to the HTC boot screen.
Ok, try this: if the phone is still on keep the power button pressed till it restarts and press also vol down button until you arenin the bootloader; if the device is off, enter bootloader keeping power and vol down button pressed... Now my suggestion is to flash a custom recovery and a custom rom, you will get root privileges and the phone will work again...
Sent from Somewhere Over The Rainbow...
If you are unlocked (you see it in bootloader) you can flash a custom recovery and a custom rom. Look up for your favorite Recovery and flash it.
Download the img File to directory where you have the fastboot files and run this code in command prompt
Code:
fastboot flash recovery name_of_recovery.img
After it you can boot into Bootloader and turn to recovery to get access to phone and SD Card/flash Rom
Did you flash boot.img and erased the cache?
Sent from my HTC One X using Tapatalk 2
Okay, so I successfully flashed TWRP and launched into recovery mode with it. How I get the custom ROM files on my SD card, when I plug my phone into my computer with USB it doesn't show up in the drives section, so I can't open up the SD card.
Another thing is that with the latest version of TWRP for my phone touch doesn't work in the recovery mode. There's a version that does, but it says it doesn't have USB mount or something like that. What's the next step?
You need to mount sd card via recovery, and having the touchscreen working is better as it will be easier to move inside aroma installer... Use philz recovery (if you want a sense rom use 5.15.9, if you want kitkat use the last version), enter the recovery, plug the phone into pc, mount sdcard via recovery, copy the zip over it and follow the instructions to install rom... You can find the instructions in every rom thread op... Ask if you need more help
Sent from Somewhere Over The Rainbow...
Thanks for all the help, I am really starting to get a better understanding of how this actually works. I flashed Philz recovery and went into recovery with it. Then I went to mount and mounted USB Storage. Is this the right thing? It still doesn't show up on my PC
ChaosDuck said:
Thanks for all the help, I am really starting to get a better understanding of how this actually works. I flashed Philz recovery and went into recovery with it. Then I went to mount and mounted USB Storage. Is this the right thing? It still doesn't show up on my PC
Click to expand...
Click to collapse
which version did you flash? sometimes it keeps a couple of minutes before popping up the sdcard in pc, but i ensure you that 5.15.9 usb mout feature works fine... some users (me too) faced some issues with some 6.x.y version (sorry, i don't remember which one as i still use sense rom and so philz 5.15.9)
lukes91 said:
which version did you flash? sometimes it keeps a couple of minutes before popping up the sdcard in pc, but i ensure you that 5.15.9 usb mout feature works fine... some users (me too) faced some issues with some 6.x.y version (sorry, i don't remember which one as i still use sense rom and so philz 5.15.9)
Click to expand...
Click to collapse
I flashed latest version 6.19.3. There are only 3 versions available as far as I can see. They are:
6.19.3
6.12.8
6.07.9
I'll try flashing the two other versions and see what happens.
ChaosDuck said:
I flashed latest version 6.19.3. There are only 3 versions available as far as I can see. They are:
6.19.3
6.12.8
6.07.9
I'll try flashing the two other versions and see what happens.
Click to expand...
Click to collapse
you can find 5.15.9 here
lukes91 said:
you can find 5.15.9 here
Click to expand...
Click to collapse
Thank you! It finally showed up on my PC after a minute. I wanted to try Android 4.4.2 KitKat custom ROM "Carbon" so I want to ask a bit of an off-topic question. What are the GApps thing that I am told to install with the ROM? Why are they so important, what do they do?
ChaosDuck said:
Thank you! It finally showed up on my PC after a minute. I wanted to try Android 4.4.2 KitKat custom ROM "Carbon" so I want to ask a bit of an off-topic question. What are the GApps thing that I am told to install with the ROM? Why are they so important, what do they do?
Click to expand...
Click to collapse
those are google apps (i bet you understood what they are for just reading the full name ) i'm sorry to tell you that philz 5.15.9 can't flash 4.4.2 android, so you should update it... but now you have the zip on sdcard at least... give a look at latest TWRP you can find here in the OP #2 (everyhing should work with this version, but i still didn't test it, so i can't ensure it... i told you to use Philz 5.15.9 because i was 100% sure USB mount works with that recovery, and we needed to put a rom zip on sdcard ) now that you understood how things work, you can choose the recovery you want according to your reqirements have a nice flash man, and feel free to ask me if you need any further help
lukes91 said:
those are google apps (i bet you understood what they are for just reading the full name ) i'm sorry to tell you that philz 5.15.9 can't flash 4.4.2 android, so you should update it... but now you have the zip on sdcard at least... give a look at latest TWRP you can find here in the OP #2 (everyhing should work with this version, but i still didn't test it, so i can't ensure it... i told you to use Philz 5.15.9 because i was 100% sure USB mount works with that recovery, and we needed to put a rom zip on sdcard ) now that you understood how things work, you can choose the recovery you want according to your reqirements have a nice flash man, and feel free to ask me if you need any further help
Click to expand...
Click to collapse
I flashed to the newest Philz recovery again and successfully installed both ROM and GApps. Rebooting phone now, I hope it works... Been on HTC screen for a while though.
ChaosDuck said:
I flashed to the newest Philz recovery again and successfully installed both ROM and GApps. Rebooting phone now, I hope it works... Been on HTC screen for a while though.
Click to expand...
Click to collapse
have you flashed boot.img via fastboot and erased cache via fastboot? the commands are
fastboot flash boot boot.img
fastboot erase cache
remember that first boot can take a while (in some cases up to ten minutes)
lukes91 said:
have you flashed boot.img via fastboot and erased cache via fastboot? the commands are
fastboot flash boot boot.img
fastboot erase cache
remember that first boot can take a while (in some cases up to ten minutes)
Click to expand...
Click to collapse
Ahhh yes, it seems that was the only thing I still needed to do. It's on the Carbon launch screen now. Thanks a bunch man, I literally love you! :laugh:
ChaosDuck said:
Ahhh yes, it seems that was the only thing I still needed to do. It's on the Carbon launch screen now. Thanks a bunch man, I literally love you! :laugh:
Click to expand...
Click to collapse
lol, you're welcome, happy i've helped you

CWM 6.0.4.8 Mounting storage not work

Title says everything I cant get get to phone storage when I mount USB storage, i installed latest version of CWM 6.0.4.8.
Or try to update the drivers, or flash philz 5.15. Mount the sdcard and wait literally minutes to let it pop up.
I've found this problem too.
I've tried to use CWM 6.0.4.8, TWRP 2.7.1.0 (Unofficial), Philz 6.19.3.
It doesn't have any recovery can mount USB storage. :crying:
Tokemon said:
I've found this problem too.
I've tried to use CWM 6.0.4.8, TWRP 2.7.1.0 (Unofficial), Philz 6.19.3.
It doesn't have any recovery can mount USB storage. :crying:
Click to expand...
Click to collapse
Flash Philz 5.15.9 after this copy what you need and after this flash again latest TWRP CWM or Philz
Thant said:
Flash Philz 5.15.9 after this copy what you need and after this flash again latest TWRP CWM or Philz
Click to expand...
Click to collapse
Now, I work with your step every time that I flash rom. But I need to know how can I fixed or something better?
Tokemon said:
Now, I work with your step every time that I flash rom. But I need to know how can I fixed or something better?
Click to expand...
Click to collapse
Can't you copy the ROM.zip through Android system? How long did you have patience to wait for sd card to show in your pc explorer?
Tokemon said:
Now, I work with your step every time that I flash rom. But I need to know how can I fixed or something better?
Click to expand...
Click to collapse
Yes like @[email protected]|-|oR say before flash new rom use the old rom to copy files to your sd card my way is if you dont have working rom and is for critical moments:silly:
[email protected]|-|oR said:
Can't you copy the ROM.zip through Android system? How long did you have patience to wait for sd card to show in your pc explorer?
Click to expand...
Click to collapse
I just found it after try to flash recovery that newer than CWM 5.8.4.0
Thant said:
Yes like @[email protected]|-|oR say before flash new rom use the old rom to copy files to your sd card my way is if you dont have working rom and is for critical moments:silly:
Click to expand...
Click to collapse
Thank so much

HTC One X Semi Bricked NEED HELP.

Hello,
Well, I was trying to install some new kernels but somehow my phone went into Boot Loop.
After that, I accidentally formatted my system and system memory. End Result: Their is nothing in my SD Card Right now.
I have searched in this forum and others for 2 days and still can not find a proper solution. Now, my laptop and computer does not recognize my device through adb device. I tried to insall stock rom through RUU but it gave an Boot Loader Version Error. However, I managed to install philz recovery and tried to mount memory but still no luck, I can not push files through adb as it can not recognize my device.
My CID is 02_001. I downloaded the matched CID RUU (RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed) but it didnt work. My image number of the phone (I dont know what is this actually) is like 4.xxxx and the image number of the RUU is 1.xxxx.
The HBOOT version is 1.72 S ON.
Can someone by someway, please give me the link of UPDATED RUU so that I can flash to stock rom or just help me to find a way to transfer custom rom to my phone memory so that I can flash a custom rom.
I was using VIPERX ROM 4.1.1,as the phone was draining alot of battery so over efficiently I tried to FLASH BRICKED KERNEL.
NOW I AM STUCK, HELPLESS and after losing the battle I am posting this thread.
PLEASE HELP ME WITH A SUITABLE ANSWER.
I would prefer to install stock rom but it wont work I guess because of the updated HBOOT version.
WaleedUQ said:
Hello,
Well, I was trying to install some new kernels but somehow my phone went into Boot Loop.
After that, I accidentally formatted my system and system memory. End Result: Their is nothing in my SD Card Right now.
I have searched in this forum and others for 2 days and still can not find a proper solution. Now, my laptop and computer does not recognize my device through adb device. I tried to insall stock rom through RUU but it gave an Boot Loader Version Error. However, I managed to install philz recovery and tried to mount memory but still no luck, I can not push files through adb as it can not recognize my device.
My CID is 02_001. I downloaded the matched CID RUU (RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed) but it didnt work. My image number of the phone (I dont know what is this actually) is like 4.xxxx and the image number of the RUU is 1.xxxx.
The HBOOT version is 1.72 S ON.
Can someone by someway, please give me the link of UPDATED RUU so that I can flash to stock rom or just help me to find a way to transfer custom rom to my phone memory so that I can flash a custom rom.
I was using VIPERX ROM 4.1.1,as the phone was draining alot of battery so over efficiently I tried to FLASH BRICKED KERNEL.
NOW I AM STUCK, HELPLESS and after losing the battle I am posting this thread.
PLEASE HELP ME WITH A SUITABLE ANSWER.
I would prefer to install stock rom but it wont work I guess because of the updated HBOOT version.
Click to expand...
Click to collapse
Flash Philz 5.15.9 recovery munt sd card and copy your rom to sd card after this install it and flash the boot.img from your rom archive
Thant said:
Flash Philz 5.15.9 recovery munt sd card and copy your rom to sd card after this install it and flash the boot.img from your rom archive
Click to expand...
Click to collapse
Ohkay, I tried the way you told me .
I have Philz Version 6.19.3 however now,
I am getting this error
asset failed: getprop('ro.product.device')=='endeavoru'
II getprop('ro.build.product')=='endeavoru' II
getprop('ro.product.board')=='endeavoru'
WaleedUQ said:
Ohkay, I tried the way you told me .
I have Philz Version 6.19.3 however now,
I am getting this error
asset failed: getprop('ro.product.device')=='endeavoru'
II getprop('ro.build.product')=='endeavoru' II
getprop('ro.product.board')=='endeavoru'
Click to expand...
Click to collapse
Man, @Thant trying to help and you skip his instructions?
Do what he said,flash philz 5.15.9.
WaleedUQ said:
Ohkay, I tried the way you told me .
I have Philz Version 6.19.3 however now,
I am getting this error
asset failed: getprop('ro.product.device')=='endeavoru'
II getprop('ro.build.product')=='endeavoru' II
getprop('ro.product.board')=='endeavoru'
Click to expand...
Click to collapse
witch Rom are you try to install?

SM-T310 Galaxy Tab 3 8.0 - Storage Wiped - Help Me Install CM

Hi guys, much thanks for your help.
I had the unofficial CM11 nightly installed on my GTab 3 8.0 but it got corrupted. I used PhilZ Touch to wipe the storage but I can't find a guide to help me re-install CM on this device.
I tried to use Odin to install CM11, but it won't take .zip files. I converted the file to .tar so I could try and flash it, but Odin immediately crashed.
Please help me fix this device.
To add - There is no ROM installed on this device. It has only the philz touch recovery installed.
I can't turn the tablet off - The device just constantly displays the battery icon. When I try to turn it on, it boots and endlessly displays the galaxy tab 3 boot splash screen.
Hoodahottie said:
To add - There is no ROM installed on this device. It has only the philz touch recovery installed.
I can't turn the tablet off - The device just constantly displays the battery icon. When I try to turn it on, it boots and endlessly displays the galaxy tab 3 boot splash screen.
Click to expand...
Click to collapse
I'm not familiar with philz, I'm using TWRP, but I used TWRP to install CM11. I'm assuming philz is similar.
lloydsw said:
I'm not familiar with philz, I'm using TWRP, but I used TWRP to install CM11. I'm assuming philz is similar.
Click to expand...
Click to collapse
Yes lloydsw, PhilZ is ClockWorkMod based. PhilZ has similar functionality to TWRP.
My problem is that I don't know how to get the ROM zip file onto the tablet. If I can get it on the tablet, I'll have no trouble installing with PhilZ.
I tried to adb a little bit, but I keep getting Access is denied errors. For some reason, I have been getting these errors recently whenever the Console is involved, even if I launch it with admin rights. I think Microsoft changed Console functionality with a recent update. So, I didn't try too hard.
So, how do I get this rom file into the tablet?
Hoodahottie said:
Yes lloydsw, PhilZ is ClockWorkMod based. PhilZ has similar functionality to TWRP.
My problem is that I don't know how to get the ROM zip file onto the tablet. If I can get it on the tablet, I'll have no trouble installing with PhilZ.
I tried to adb a little bit, but I keep getting Access is denied errors. For some reason, I have been getting these errors recently whenever the Console is involved, even if I launch it with admin rights. I think Microsoft changed Console functionality with a recent update. So, I didn't try too hard.
So, how do I get this rom file into the tablet?
Click to expand...
Click to collapse
Put the zip on an external sdcard and use that.
Sent from my SM-N900V using Tapatalk
gr8nole said:
Put the zip on an external sdcard and use that.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Hi gr8nole,
I don't think I have an microSD. I have an old SD card but I don't think the Tab 3 will take that.
Is there some kind of GUI tool, like the nexus root toolkit that let me flash .zip files on this thing? I don't why odin doesn't take the most common kind of compressed file. I'm kind of stuck here.
Hoodahottie said:
Hi gr8nole,
I don't think I have an microSD. I have an old SD card but I don't think the Tab 3 will take that.
Click to expand...
Click to collapse
You have a couple options.
Download the full firmware from sammobile.com and flash it with odin. Then re-flash custom recovery.
Or, continue trying to get the rom zip onto your device. Either get a micro sdcard or get adb to work.
If you get adb working, remember you have to mount the data partition before you can send anything to the internal sdcard (internal sdcard is simply a link to /data/media).
Sent from my SM-N900V using Tapatalk
Hey everybody.
I searched my house for microSD cards, and I found one in an old dumb phone. And I recovered some pictures and info that I thought was lost. I found sd card adapters in another box. I put them together and installed the rom easily.
My tablet is working fine, thanks to everyone. Not only is my device working again, I found my lost data. yes!
gr8nole, special thanks to you. Have a great day!

Categories

Resources