HTC One X Semi Bricked NEED HELP. - HTC One X

Hello,
Well, I was trying to install some new kernels but somehow my phone went into Boot Loop.
After that, I accidentally formatted my system and system memory. End Result: Their is nothing in my SD Card Right now.
I have searched in this forum and others for 2 days and still can not find a proper solution. Now, my laptop and computer does not recognize my device through adb device. I tried to insall stock rom through RUU but it gave an Boot Loader Version Error. However, I managed to install philz recovery and tried to mount memory but still no luck, I can not push files through adb as it can not recognize my device.
My CID is 02_001. I downloaded the matched CID RUU (RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed) but it didnt work. My image number of the phone (I dont know what is this actually) is like 4.xxxx and the image number of the RUU is 1.xxxx.
The HBOOT version is 1.72 S ON.
Can someone by someway, please give me the link of UPDATED RUU so that I can flash to stock rom or just help me to find a way to transfer custom rom to my phone memory so that I can flash a custom rom.
I was using VIPERX ROM 4.1.1,as the phone was draining alot of battery so over efficiently I tried to FLASH BRICKED KERNEL.
NOW I AM STUCK, HELPLESS and after losing the battle I am posting this thread.
PLEASE HELP ME WITH A SUITABLE ANSWER.
I would prefer to install stock rom but it wont work I guess because of the updated HBOOT version.

WaleedUQ said:
Hello,
Well, I was trying to install some new kernels but somehow my phone went into Boot Loop.
After that, I accidentally formatted my system and system memory. End Result: Their is nothing in my SD Card Right now.
I have searched in this forum and others for 2 days and still can not find a proper solution. Now, my laptop and computer does not recognize my device through adb device. I tried to insall stock rom through RUU but it gave an Boot Loader Version Error. However, I managed to install philz recovery and tried to mount memory but still no luck, I can not push files through adb as it can not recognize my device.
My CID is 02_001. I downloaded the matched CID RUU (RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed) but it didnt work. My image number of the phone (I dont know what is this actually) is like 4.xxxx and the image number of the RUU is 1.xxxx.
The HBOOT version is 1.72 S ON.
Can someone by someway, please give me the link of UPDATED RUU so that I can flash to stock rom or just help me to find a way to transfer custom rom to my phone memory so that I can flash a custom rom.
I was using VIPERX ROM 4.1.1,as the phone was draining alot of battery so over efficiently I tried to FLASH BRICKED KERNEL.
NOW I AM STUCK, HELPLESS and after losing the battle I am posting this thread.
PLEASE HELP ME WITH A SUITABLE ANSWER.
I would prefer to install stock rom but it wont work I guess because of the updated HBOOT version.
Click to expand...
Click to collapse
Flash Philz 5.15.9 recovery munt sd card and copy your rom to sd card after this install it and flash the boot.img from your rom archive

Thant said:
Flash Philz 5.15.9 recovery munt sd card and copy your rom to sd card after this install it and flash the boot.img from your rom archive
Click to expand...
Click to collapse
Ohkay, I tried the way you told me .
I have Philz Version 6.19.3 however now,
I am getting this error
asset failed: getprop('ro.product.device')=='endeavoru'
II getprop('ro.build.product')=='endeavoru' II
getprop('ro.product.board')=='endeavoru'

WaleedUQ said:
Ohkay, I tried the way you told me .
I have Philz Version 6.19.3 however now,
I am getting this error
asset failed: getprop('ro.product.device')=='endeavoru'
II getprop('ro.build.product')=='endeavoru' II
getprop('ro.product.board')=='endeavoru'
Click to expand...
Click to collapse
Man, @Thant trying to help and you skip his instructions?
Do what he said,flash philz 5.15.9.

WaleedUQ said:
Ohkay, I tried the way you told me .
I have Philz Version 6.19.3 however now,
I am getting this error
asset failed: getprop('ro.product.device')=='endeavoru'
II getprop('ro.build.product')=='endeavoru' II
getprop('ro.product.board')=='endeavoru'
Click to expand...
Click to collapse
witch Rom are you try to install?

Related

S3 stuck at cwm

PLEASE HELP ...... I TRIED TO DOWNLOAD KITKAT 4.4 ON MY PHONE AND NOW MY S3 ONE GOES TO CWM AND BOOT MODE I NEED HELP PRONTO AND IT WONT GO INTO USB MODE HELP PLS:crying::crying::crying::crying:
smith77342 said:
PLEASE HELP ...... I TRIED TO DOWNLOAD KITKAT 4.4 ON MY PHONE AND NOW MY S3 ONE GOES TO CWM AND BOOT MODE I NEED HELP PRONTO AND IT WONT GO INTO USB MODE HELP PLS:crying::crying::crying::crying:
Click to expand...
Click to collapse
wait, it does or doesnt go to download mode? if it does....odin back to stock. make sure you use the 4.3 tar if you have a knox enabled bootloader.
if it doesnt go into download, mount usb storage from recovery and put a stock touchwiz rom on your phone and flash that?
I found that when I downloaded TWRP for recovery and tried to install 4.4, I was unable to do so(install error). I flashed a 4.3 and worked. That might not answer your question but that's what happened to me.
can u tell me
chrishh44 said:
I found that when I downloaded TWRP for recovery and tried to install 4.4, I was unable to do so(install error). I flashed a 4.3 and worked. That might not answer your question but that's what happened to me.
Click to expand...
Click to collapse
how did u flash ur rom and how did u get twrp installed because i cant even acesse my phone:crying:
I put a micro-SD card in my computer using the adapter and placed the rom on it. Put it back in your phone, find the file in recovery, then flash.
chrishh44 said:
I found that when I downloaded TWRP for recovery and tried to install 4.4, I was unable to do so(install error). I flashed a 4.3 and worked. That might not answer your question but that's what happened to me.
Click to expand...
Click to collapse
Your TWRP issue is likely a compatibility issue. If you are using version 2.6.3.0, that version is not capable of flashing KitKat 4.4.x ROM's due to changes in the code from 4.3.x to 4.4.x. Version 2.6.3.1 is supposed to be compatible for KitKat, but a lot of users, myself included, could not get it to work properly, nothing would mount in recovery, and the touch response was horrendous. I personally highly recommend Philz Touch recovery, it is based on CWM, but is light-years beyond regular CWM, and is virtually flawless in my opinion.

[Q] twrp wont flash roms on sgs3 (In need of a genius) will it be you

hey guys hope you guys can help when i flash this is what i get (updating partitin details....
running boot script...
finished running boot script.
simulating actions...
updating partitions details...) but the rom wont flash
heres the tricky i formated my system so i have no o.s. and my usb port does not sync it only charges i tried flasing twrp again and also phils touch and tried flashing different roms but to no prevail, my ? is is their any way with in my sdcard and twrp file manager where i can delete replace any files or scripts internally into my phone .
bigpappapuff said:
hey guys hope you guys can help when i flash this is what i get (updating partitin details....
running boot script...
finished running boot script.
simulating actions...
updating partitions details...) but the rom wont flash
heres the tricky i formated my system so i have no o.s. and my usb port does not sync it only charges i tried flasing twrp again and also phils touch and tried flashing different roms but to no prevail, my ? is is their any way with in my sdcard and twrp file manager where i can delete replace any files or scripts internally into my phone .
Click to expand...
Click to collapse
Did you update to 4.4.2?
Besacuse If you update the bootloader are experiencing the same problem as many of us.
You are speaking about scripts at boot. But you did not refer to the updater script that actually flashed the Rom. Also what Rom are you trying to flash ? What is your current bootloader and Recovery ?
Perseus71 said:
You are speaking about scripts at boot. But you did not refer to the updater script that actually flashed the Rom. Also what Rom are you trying to flash ? What is your current bootloader and Recovery ?
Click to expand...
Click to collapse
i put up the images i was on 4.3. i was running twrp v2.6.3.1
i was n the serx tw rom and was trying to flash liquid smooth and when back trying t flash serx again but cant the updater script is what i was trying to talk about is their any hope
I also tried t flash phillz touch and cant. my usb port nly charges if i can find a way that i can go internally threw wiring so i can connect odin ill be good.
I genuinely have a hard time trying to follow what you are saying. I did see the photos but they don't help much. I do want to help you. But I really having hard time following you.
Can you please articulate better? Or use Google translate if English is not your first language.
Perseus71 said:
I genuinely have a hard time trying to follow what you are saying. I did see the photos but they don't help much. I do want to help you. But I really having hard time following you.
Can you please articulate better? Or use Google translate if English is not your first language.
Click to expand...
Click to collapse
its started when i tried t flash liquid smooth rm 4.4.2 but twrp 2.6.3.1 would not flash all it would say is (updating partitions details....etc as shown in the image so i tried to flash serx rom 4.3 and it wouldnt flash. i also tried flashing philz touch cwm but it gave me the same result. my usb port only charges it wont sync with my pc so i cant odin back. is their anyway i can fix this issue thnx
Please use Mobile Odin and flash Stock Rom first. Then Flash latest TWRP again.
Perseus71 said:
Please use Mobile Odin and flash Stock Rom first. Then Flash latest TWRP again.
Click to expand...
Click to collapse
i cant no o.s. on the phone when i wiped i wiped everything except the micro sd and ineternal storage.
Oh, so are you telling me that right now, every partition on the phone is wiped cleaned and the USB port does not recognize in Odin ?
What Recovery is on it right now ?
Perseus71 said:
Oh, so are you telling me that right now, every partition on the phone is wiped cleaned and the USB port does not recognize in Odin ?
What Recovery is on it right now ?
Click to expand...
Click to collapse
twrp 2.6.3.1
Download SlimKat v 3.10 You will need Gapps.
Flash via the Recovery. Make sure to take a photo if error occurs.
Try using clockwork because I had alot of issues flashing newer Roms on twrp just sayin
Sent from my SGH-T999 using xda app-developers app
Maybe I missed something, but if you can get download mode, you should be able to use Odin. Have you tried reinstalling drivers?
Sent from my SM-N900T using Tapatalk

[HELP] Unbrick HTC One X

Hey guys,
I need help unbricking my HTC One X. I was trying to set up CM11 on it but I used CWM Recovery 5.0.8 instead of 6.0.4 that it requires. I managed to remove the stock OS and now it only loads bootloader or cwm recovery.
I downloaded the stock ROM and I'm now trying to install that via recovery. This is what I've been trying to send the file to the HOX -
I've been trying to use ADB to transfer files to the device but the device can't be found (List of devices shows up blank). However, it shows up in fastboot.
I tried connecting a USB OTG to it but I can't seem to find any option to install from external USB. I tried to mount USB but it gives me an error - E:Unable to open ums lunfile.
I tried running an RUU but that didn't work either.
I'm thinking that once I can see the stock ROM file through CWM recovery, it should be easy enough to install that. So what should I be doing to get the file onto the HOX or what other approach can I use?
Will help me out a lot!
Thanks!
ankeetguha said:
Hey guys,
I need help unbricking my HTC One X. I was trying to set up CM11 on it but I used CWM Recovery 5.0.8 instead of 6.0.4 that it requires. I managed to remove the stock OS and now it only loads bootloader or cwm recovery.
I downloaded the stock ROM and I'm now trying to install that via recovery. This is what I've been trying to send the file to the HOX -
I've been trying to use ADB to transfer files to the device but the device can't be found (List of devices shows up blank). However, it shows up in fastboot.
I tried connecting a USB OTG to it but I can't seem to find any option to install from external USB. I tried to mount USB but it gives me an error - E:Unable to open ums lunfile.
I tried running an RUU but that didn't work either.
I'm thinking that once I can see the stock ROM file through CWM recovery, it should be easy enough to install that. So what should I be doing to get the file onto the HOX or what other approach can I use?
Will help me out a lot!
Thanks!
Click to expand...
Click to collapse
Flash Philz 5.15.9 recovery after this go in recovery mount sd card and copy what you need to your sd card and inastall what you want. And if you want to install CMM11 copy the files to your sd card and after this flash CWM 6.0.4.8 and install CM11
Thant said:
Flash Philz 5.15.9 recovery after this go in recovery mount sd card and copy what you need to your sd card and inastall what you want. And if you want to install CMM11 copy the files to your sd card and after this flash CWM 6.0.4.8 and install CM11
Click to expand...
Click to collapse
Thanks a ton! I managed to flash CWM 6.0.4.8 on it and then I installed CM11 and then the GAPPS. The installation went through fine and I can finally see the CM load screen. However, I think I'm stuck in some sort of bootloop since it doesn't seem to get past the loading screen.
Any ideas on how to fix this? Things are looking up!
ankeetguha said:
Thanks a ton! I managed to flash CWM 6.0.4.8 on it and then I installed CM11 and then the GAPPS. The installation went through fine and I can finally see the CM load screen. However, I think I'm stuck in some sort of bootloop since it doesn't seem to get past the loading screen.
Any ideas on how to fix this? Things are looking up!
Click to expand...
Click to collapse
Did you flash the boot .img from fastboot
paulh1978 said:
Did you flash the boot .img from fastboot
Click to expand...
Click to collapse
Oh man that's what I missed! Thanks so much, was working on this for hours.
Incredible
ankeetguha said:
Oh man that's what I missed! Thanks so much, was working on this for hours.
Incredible
Click to expand...
Click to collapse
No worries have fun.

[q] please help -- bricked --

well, I was installing a aosp jelly bean rom and I installed the boot.img first and then flashed the rom, but the rom said that the install was aborted due to bootloader issues or something. I then tried to restore my nandroid backupand that put me stuck on the htc screen on bootup. I then tried to install stock recovery as a guide told me or something and it got rid of my backup. I have no idea what to do. I have reflashed CWM and can boot into the bootloader and the recovery. How can I install a new rom or a stock rom to make this work. Please help!
My main number is this : 4.18.401.4
my hboot version is 1.72.0000
my radio version is 5.1204.167.31
gman88667733 said:
well, I was installing a aosp jelly bean rom and I installed the boot.img first and then flashed the rom, but the rom said that the install was aborted due to bootloader issues or something. I then tried to restore my nandroid backupand that put me stuck on the htc screen on bootup. I then tried to install stock recovery as a guide told me or something and it got rid of my backup. I have no idea what to do. I have reflashed CWM and can boot into the bootloader and the recovery. How can I install a new rom or a stock rom to make this work. Please help!
My main number is this : 4.18.401.4
my hboot version is 1.72.0000
my radio version is 5.1204.167.31
Click to expand...
Click to collapse
are you flashed the boot.img from the backup?
Thant said:
are you flashed the boot.img from the backup?
Click to expand...
Click to collapse
It deleted my backup so I couldn't get it... not sure what to do...
my situation is that my backup is gone and I am stuck at the htc quietly brilliant logo
gman88667733 said:
It deleted my backup so I couldn't get it... not sure what to do...
my situation is that my backup is gone and I am stuck at the htc quietly brilliant logo
Click to expand...
Click to collapse
ok wich hboot and wich recovery you flashed first time, now you are with the stock one.
1. Unlock bootloader and flash THIS recovery
take the recovery.img from zip paste it in your fastboot folder and flash it with the command fastboot flash recovery recovery.img then go in recovery and charge the phone
2. Do you have some rom on your sd card?
3. Wich CWM version?
Edit if your AICP rom is still on sd card flash THIS RECOVERY then install the rom and flash the boot.img.
I think you tryed with the old recovery to install KitKat or LP rom big mistake
Thant said:
ok wich hboot and wich recovery you flashed first time, now you are with the stock one.
1. Unlock bootloader and flash THIS recovery
take the recovery.img from zip paste it in your fastboot folder and flash it with the command fastboot flash recovery recovery.img then go in recovery and charge the phone
2. Do you have some rom on your sd card?
Click to expand...
Click to collapse
okay, so this will sound odd but I rfandomly flashed philz touch recovery and my phone turned on and is now working.... I think I need the proper help to install a custom rom now, instead of messing up... could you maybe get me the files for a JB AOSP rom? I would appreciate it! not sure what to look for now after this, scared i'll mess up. Thanks!
gman88667733 said:
okay, so this will sound odd but I rfandomly flashed philz touch recovery and my phone turned on and is now working.... I think I need the proper help to install a custom rom now, instead of messing up... could you maybe get me the files for a JB AOSP rom? I would appreciate it! not sure what to look for now after this, scared i'll mess up. Thanks!
Click to expand...
Click to collapse
Why you not install some sense for first time or try to flash some CM12 or lolipop. Remember Philz 5.15.9 is only for JB roms and mount sd card work only on 5.15.9. If you want KitKat or Lolipop you must to change the recovery to this where I give you in my post, but dont forget to copy the rom to sd card with this recovery first., or easy way download some sense and flash it
Say wich rom you want to flash and I will give you the right link for rom
Thant said:
Why you not install some sense for first time or try to flash some CM12 or lolipop. Remember Philz 5.15.9 is only for JB roms and mount sd card work only on 5.15.9. If you want KitKat or Lolipop you must to change the recovery to this where I give you in my post, but dont forget to copy the rom to sd card with this recovery first., or easy way download some sense and flash it
Say wich rom you want to flash and I will give you the right link for rom
Click to expand...
Click to collapse
You are very kind when flashing a rom, do I remove the boot.img from the rom file to flash via fastboot, or do i just make a copy of it? I would like to flash cm 10.2 to begin with, which files do i need and which recovery? thank you in advance, you are a great help!
Also, my phone only came with 1.5gb free space for apps... It is a 32gb phone and i have 25gb of storage left but it says only 1.5gb out of 6gb for apps, how do i unlimit this?
gman88667733 said:
You are very kind when flashing a rom, do I remove the boot.img from the rom file to flash via fastboot, or do i just make a copy of it? I would like to flash cm 10.2 to begin with, which files do i need and which recovery? thank you in advance, you are a great help!
Also, my phone only came with 1.5gb free space for apps... It is a 32gb phone and i have 25gb of storage left but it says only 1.5gb out of 6gb for apps, how do i unlimit this?
Click to expand...
Click to collapse
10.2 is too old but it is your decision. just extract the boot.img from zip and put it in your fastboot folder. Don't extract the hole zip, and copy the original zip on your sd card. You can move the apps to your sd card CM support it
Well I want an aosp rom that means i can stick to the same recovery. It seems easier to stick to JB, would that be okay? Could you find me the relevant files?
I basically want the easiest one to install and the most risk free!
Sent from my HTC One X using XDA Free mobile app

[Q] stuck after installing firmware

i flashed new firmware to my htc one m8
I got into recovery and changed the name firmware file.
but now in the recovery it doesn't recognize my internal storage, kind of. it says 0 mb.
And when I try via adb to push a file to it it fails. (adb push filename.zip /sdcard/)
so it seems like i only have the external card now working.
what can I do?
I'm currently in the stage where i have the firmware file in the right name and it keeps asking me to update, if i remove the external card, i can get into recovery change the name, and then i see it won't read the internal storage like i wrote up here.
but after I change the name i can get into fastboot mode.
I currently have recovery mode - twrp 2.8.0.3
p.s I think my internal storage does work, cause i can go into recovery mode(twrp), my external_sd was formmated
before i used to update the firmware, so it has nothing except for that file
You're not flashing the firmware through recovery, are you?
No, i flashed, with the guide here, via an external card, changing the name of the firnware so the hboot would recognize it.. and update it
josh.walker.9242 said:
You're not flashing the firmware through recovery, are you?
Click to expand...
Click to collapse
I was thinking that maybe my twrp version 2.8.0.3 is too old for this bootloader veraion maybe, and i need to update to twrp to 2.8.6 and then try to transfer the rom file and install it.
What do u think?
Do u have any suggestions?
dav_sap said:
I was thinking that maybe my twrp version 2.8.0.3 is too old for this bootloader veraion maybe, and i need to update to twrp to 2.8.6 and then try to transfer the rom file and install it.
What do u think?
Do u have any suggestions?
Click to expand...
Click to collapse
I have TWRP 2.8.0.6. You can download TWRP manager from Play Store, it has a list of TWRP versions you can install. The app installs them too. Everytime I used the app to install it, it says it failed but it actually works, just install, then say ok to the failed install pop up and reboot into recovery and it'll be there.
Edit: As soon as the firmware has flashed successfully, boot up and delete the firmware file off of your external SD card so it doesn't keep asking you to update.
josh.walker.9242 said:
I have TWRP 2.8.0.6. You can download TWRP manager from Play Store, it has a list of TWRP versions you can install. The app installs them too. Everytime I used the app to install it, it says it failed but it actually works, just install, then say ok to the failed install pop up and reboot into recovery and it'll be there.
Click to expand...
Click to collapse
I have no OS now.
I need to download it, and flash it via fastboot. I'm wondering if that's the problem that the internal storage is giving me these problems or it has nothing to do with it.
Does a different firmware require different twrp versions?
Sent from my HTC Desire HD using XDA Free mobile app
dav_sap said:
I have no OS now.
I need to download it, and flash it via fastboot. I'm wondering if that's the problem that the internal storage is giving me these problems or it has nothing to do with it.
Does a different firmware require different twrp versions?
Sent from my HTC Desire HD using XDA Free mobile app
Click to expand...
Click to collapse
Not as far as I know. Your best bet man is probably to download an RUU and just flash that through fastboot or the external sd card method. Then after that, flash the TWRP then put a ROM zip on your phone and flash that way.
josh.walker.9242 said:
Not as far as I know. Your best bet man is probably to download an RUU and just flash that through fastboot or the external sd card method. Then after that, flash the TWRP then put a ROM zip on your phone and flash that way.
Click to expand...
Click to collapse
What RUU should i use? Isn't that just firmware like the one i flashed now?
dav_sap said:
What RUU should i use? Isn't that just firmware like the one i flashed now?
Click to expand...
Click to collapse
No, an RUU is a complete system install. Completely stock with the exception of some RUUs contain root. But it will wipe everything on your phone, all your personal data and what not.

Categories

Resources