Related
ok soo i dropped my Tilt 2 from a standing point (which is about 5 and a half feet since im 5'9) with the phones keyboard open and screens tilted, whats funny is that no battery fell out or anything, it just shuts off, i had to turn it back on.
when i shaked the phone i heard a slight rattle and i reckon its from the Flex Cable from the LCD screen, the rattle stops when i have my Tilt 2s keyboard open, but when i tilt the screen i can hear it slightly...is that normal?
also what is going to aggravate me for the rest of the time im going to own this phone is that when im using the phone's software keyboard on portrait at say like a 15 degree angle i can hear taps which is quite annoying but if i hold it at a 45 degree angle it stops, i turned the phone to the side i notice a gap, not a big one and not really noticeable but id say its roughly .5mm thick, i push the screen down and the gap gets smaller, is normal as well?
plz let me know thnx a lot
short answer.... no.... not normal. You knocked something loose inside hence the rattle, WHICH you probably already knew The gap, also not normal. Well wait.. I should correct myself. This is all probably totally normal for people who have dropped their phone. You're lucky you didn't crack your screen or do more damage and the phone's still usable!
Aaron McCarthy said:
short answer.... no.... not normal. You knocked something loose inside hence the rattle, WHICH you probably already knew The gap, also not normal. Well wait.. I should correct myself. This is all probably totally normal for people who have dropped their phone. You're lucky you didn't crack your screen or do more damage and the phone's still usable!
Click to expand...
Click to collapse
hmm, well i talked to one Tilt 2 owner and he said he has that rattle and he hasnt dropped it? but like i mentioned, the rattle must be coming from that Flex cable that goes between the motherboard and the LCD screen....
No rattle and no gap on mine, but I've only had it 5 days. Give me time.
I have rattle too, but i think its the G-Sensor !
bwnotredame06 said:
I have rattle too, but i think its the G-Sensor !
Click to expand...
Click to collapse
i did a couple of searches on PPC and some say its a normal thing especially in the tilted position? http://forum.ppcgeeks.com/showthread.php?t=87452 at least im not the only one! i just have OCD xD
heres a video of the screen problem im having
but its not as worse as his but you guys get the point
I just dropped my phone yesterday with keyboard out and tilted and I got a similar problem to this. My screen only has a gap when I pull it up, which I wasn't able to do before, but the screen slide is now about 1 or 2 cm's to the left causing it not to line up with the keyboard slide. Somewhat aggravating, but totally unnoticable unless your holding the phone. I don't get any rattle though...
XanderCorp said:
I just dropped my phone yesterday with keyboard out and tilted and I got a similar problem to this. My screen only has a gap when I pull it up, which I wasn't able to do before, but the screen slide is now about 1 or 2 cm's to the left causing it not to line up with the keyboard slide. Somewhat aggravating, but totally unnoticable unless your holding the phone. I don't get any rattle though...
Click to expand...
Click to collapse
hmm
well if i were to dismantle the phone and repair the little bridge that goes across the back of the LCD screen would that solve the issue? because it seems when i push on it it seems to fill a gap but idk if thats what causing the whole screen and kb issue but im going to do it when i have the chance
I have a tilt and mines exacly like the one in the video with the vary small gap and the screen wobble, I always assumed it was normal, mine dosent rattle though
that little gap and the screen wobble.
it just because is got movable parts, look at the screen hinges if i can call them that.
its the reason i didnt want to get mine, ive always chose candy bar phones so i dont worry about that.
but i did get me a tilt 2 and have dropped it too, i also think my wobbly screen started after i dropped it, but ive had it a year, since it first came out. the only thing i hate reall bad about this phone it the lack of a headphone jack I HATE THAT WITH A PASSION.
Hi all,
I simply love this phone, but I'm facing a situation that my screen is too sensitive. The home screens were so sensitive a few programs were started without my knowledge. It got better after I switched to Launcher Pro.
However, it is still too sensitive in other areas. When I'm scrolling down, say, the apps in Market, I'll always end up selecting a few items accidentally before I reach the end of the list.
I've used HTC Desire in the past and I'm quite sure the problem is not due to me.
Does anyone else face the same problem, or I have a hardware problem? Or software problem? Can I be tweaked by any means?
Any feedback would be useful! Thanks!!!
KG
I faced this problem before... while swiping, apps accidentally open. But instead of "too sensitive" i thought it's insensitive... because a short swipe was sometimes interpreted as a tap (maybe because the swipe was not fully detected?).
Anyway, I had 2 layers on my device... the pre-applied sheet and another screen protector that came with the box.
I removed the second layer, leaving only the pre-applied sheet, and all is well again... no more accidental "taps"
vincent.hsy said:
I faced this problem before... while swiping, apps accidentally open. But instead of "too sensitive" i thought it's insensitive... because a short swipe was sometimes interpreted as a tap (maybe because the swipe was not fully detected?).
Anyway, I had 2 layers on my device... the pre-applied sheet and another screen protector that came with the box.
I removed the second layer, leaving only the pre-applied sheet, and all is well again... no more accidental "taps"
Click to expand...
Click to collapse
Dude, you mean the cause was the screen protector that came with the phone???
kargtan said:
Dude, you mean the cause was the screen protector that came with the phone???
Click to expand...
Click to collapse
For my case, maybe 2 layers is just too thick
I'm having the same problem. And that solution seems to make sense. I would give it a try, but if the problem still occurs, I'd be wasting one screen protector..
zha1 said:
I'm having the same problem. And that solution seems to make sense. I would give it a try, but if the problem still occurs, I'd be wasting one screen protector..
Click to expand...
Click to collapse
That was how I solved my problem. I actually put on the spare screen protector because when I got the set I didn't realize there was already a pre-applied layer.
Don't blame me if it doesn't work for you
perhaps some of you guys just have the shakes?! ;-p
I guess the screen is never to perfect for everyone.
kargtan, I've noticed the same about the tap sensitivity - I often accidentally "tap" when I mean to swipe. Came from an iPhone 3g and didn't notice this on that device. Might be a matter of getting used to it, not sure. Have you gotten any feedback from others in other forums?
I've noticed this too, and put it down to the screen protector. It's not android OS causing it, never had the problem on my htc hero...
However, now that i've gotten used to the phone it doesnt do it any more - guess my brain has automatically trained itself to drag the screen a little bit more firmly or something.
One thing i have noticed about the arc is: because the bezel around the screen is so thin, i often accidentally launch apps just by holding it. My fingers wrap around slightly & touch the edges of the screen.
Does any of you have problems while trying to swap a screen from another and instead of swapping you get like a "bounce" and stay on the same screen? because that happens to me all the time, I came from an htc Legend and this is making me crazy !
btw, this happens to me if I hold the phone with my right hand and try to do the swapping with my thumb, the only way to get it right is to hold the phone with my left hand and use the index of my right hand
Screen too/not sensitive
Hi guys,
I think the problem arises from the slowness of the phone, not "too sensitive". I used to use the HTC Desire in the past and I was very used to the screen scrolling very quickly. In contrast, the arc is slower and hence the screens don't scroll as fast and hence my way of handling the Desire would cause the problems stated.
I did a few things since my last posting and it seems better now:
Replace the SE Home with Launcher Pro - this seems to have improved on the speed of the phone, and hence better responsiveness to the touch.
Rooted the phone and uninstalled some stock programs.
Removed useless widgets on the desktops.
Adjusted my way of scrolling as someone has suggested.
This is quite frustrating at times, especially so because other than this problem, this phone is a gem, especially its form factor, the sound quality and most importantly, the quality of the camera.
I might sell the phone once the company issues me with a Blackberry (DANG!), but I am kinda unwilling because I have been taking lots of photos with my Android phones and these photos are generally well-liked by my Facebook friends.
agree with bezel thing and hard to use thumb.
noticed arc screen (the screen guard perhaps ) easily get oily and slippery.
had to wipe phone and wash hand so often that make me like some sort of disorder.
Don't know why you guys seem to be having problems... I don't have any issues with my screen swipes at all... smooth and fast.. both on stock and Launcher Pro..
Same deal here. But that's because the screen is sensitive beyond the display area including the black border, and the edge is too narrow. When I use one hand swiping or tapping, the palm of my hand touches the black border. The screen registers two touches in quick succession and thus jumps.
In Phone keypad, enter *#*#7378423#*#* (the numbers mean SERVICE word in keypad), you can go into test mode. Select [Service test]->[Touch Screen] to test the badly touch screen of SE Phones.
You will discover when you swipe the edge of touch screen, the touched result is very not satisfied. The lines you swiped will not accurate and appear like jags, or stick on the edge of the screen.
The touch panel made in China...? ;-)
Me too!
Hey!
i also have a xperia tipo....and i too have the sensitive problem
Could also be a kernel problem?
I remember I installed a kernel a while back that would make my screen hypersensitive; just hovering over the screen would already activate it!
I don't remember which one, it was back in the GB days. But I'm pretty sure it can be changed in the kernel.
Last night while using the phone I noticed this slight clicking sound from the bottom right corner of the screen (touch-sensitive panel). So I kept pressing it and I wasn't hallucinating, its there. Also figured the sound also comes when I press the bottom right or bottom center edge of the phone. The creaking sound isn't loud but its noticeable when I hold the phone in specific angles and while typing if haptic feedback is on, I think the vibration also makes it happen(weird)
So except for this my HOX is fine and am wondering if I should get it changed.
Are there any long term effects to this? I'm starting to just ignore the sound and trying not to make it happen purposely
Depends, does it make the sound when you're using it normally? If it does I would consider swapping it, although you said everything else was fine.
If on the other hand, it makes the sound if you hold it in a certain way and push unusually hard then I would say stop intentionally pushing it in a weird way and use it properly.
People have been complaining about "screen flex" along the side of the phone when they push on the edge and run their fingers along the side. Want to get rid of the screen flex when you push the edge of your phone and move your finger along it? STOP PUSHING THE EDGE OF YOUR PHONE!!!
Just remember that some phones have had screen flickering, yellow marks and even scratches under the screen, you may not be as lucky as your were the first time if you choose to swap it.
what you described is not flex even, most mobile devices have a creak some where
Flex should mean the screen is literally loose to warrant an exchange
rob9 said:
Depends, does it make the sound when you're using it normally? If it does I would consider swapping it, although you said everything else was fine.
Click to expand...
Click to collapse
The only time I've noticed this sound while using the phone is during haptic feedback from typing on the keyboard. I switched haptic feedback off to save battery and for this 'problem'
If on the other hand, it makes the sound if you hold it in a certain way and push unusually hard then I would say stop intentionally pushing it in a weird way and use it properly.
Click to expand...
Click to collapse
I did reduce pushing it intentionally since last night after figuring it might mess it up more.
People have been complaining about "screen flex" along the side of the phone when they push on the edge and run their fingers along the side. Want to get rid of the screen flex when you push the edge of your phone and move your finger along it? STOP PUSHING THE EDGE OF YOUR PHONE!!!
Click to expand...
Click to collapse
Yea after I got mind-f***ed I did press the edge a lot to be sure.(we humans ...) But now am controlling myself to not press the edge and use it normally.
Just remember that some phones have had screen flickering, yellow marks and even scratches under the screen, you may not be as lucky as your were the first time if you choose to swap it.
Click to expand...
Click to collapse
Exactly why am thinking hard if I should get mine replaced. Another reason being I'll be leaving UAE(got the phone here) for good in a week and if by chance I do get a defective unit I'll waste a lot of time.
I'm not gonna play around with the edge anymore haha.
hamdir said:
what you described is not flex even, most mobile devices have a creak some where
Flex should mean the screen is literally loose to warrant an exchange
Click to expand...
Click to collapse
Yes you're right a lot of electronics and gadgets have creaking parts. Mostly the ones made outa plastic though. Does your HOX creak too?
death__machine said:
Yes you're right a lot of electronics and gadgets have creaking parts. Mostly the ones made outa plastic though. Does your HOX creak too?
Click to expand...
Click to collapse
my first flexed bad (soft one pressure, loose) on the left side, although i loved it so much because it had the much more dense yellowish sharp screen
second hox had a bad coating and slight flex on the left side, also hot pixels
third HOX my current is perfect, the screen is rigid on all sides expecially left and right, but it creaks if its around 50degree hot on two out of the four corners, very very slight creaks and only happens if it test it intentionally, it has the acer white screen with visible pixel grid, so the first hox screen i miss so much
im saying don't replace for a little reason bro it will be a bumpy ride, if the screen is loose then ok, you can see it by testing for light bleed in a dark room or if its physically moving
I think my screen is perfect. I can't figure how you're suggesting I test it, but pressing along the edges with slight pressure doesn't cause any change in the screen. The pixels are all good and no flickering. I think its a yellowish screen and not the bluish one.
How do you find out what LCD brand is on your HOX?
death__machine said:
I think my screen is perfect. I can't figure how you're suggesting I test it, but pressing along the edges with slight pressure doesn't cause any change in the screen. The pixels are all good and no flickering. I think its a yellowish screen and not the bluish one.
How do you find out what LCD brand is on your HOX?
Click to expand...
Click to collapse
there is a guide somewhere on how to check the LCD
anyway it sounds perfect dont get rid of it!
Hmm I don't think I'll get it changed, I love it too much . Just have to get used to the occasional/random creak/click sounds from the device.
it started out a few days ago. I started to feel like my touchscreen is not as responsive as usual.
I noticed numerous times it felt like my swipes as well as my touch (say when i want to open a specific app) are not being registered properly. Now the way i recall my samsung galaxy s, it would register a click sometimes even when you're hovering about 0.5mm to 1mm above it. So with that in mind, i thought i would try to do that with my one x. I would hover my hand slightly above it, and no response - NOTE: THIS IS NOT THE PROBLEM JUST YET.
Anyways, seeing as hovering over it doesn't work (which is not a problem imo) i would proceed to touching the screen, however i touch it without applying any pressure, i could even swipe and it WOULD NOT switch over to the next screen. I could touch the screen and the application would NOT register my fingers. However, after applying more pressure it suddenly gets registered. Even though the pressure i have to apply is just slight, Isn't this how a resistive touchscreen is supposed to behave and not a captivate touchscreen?
I thought that's because of my screen protector, i took it off and gave it 2~3 days and the issue remained.
Now my question(maybe even a favor) to you guys is as follows.
1. Try to click on an app, however, do this without applying any pressure, simply touching your touchscreen (might have to do this slowly). Does it respond? Or is it the same with with you as it is with me?
2. Please report in on the behavior of your touchscreen.
NOTE: I just want to know if my touchscreen is behaving normally or not. I do recall a better experience, actually if anything i was very happy with my one x's screen and this is simply annoying. Espeically when i have it on a soft surface and i push my screen, normally a soft surface tends to bulge in upon pressure.
It could take three touches for that freaking thing to register it if my phone is lying on a pullover or whatever else that's soft. Lately i'm not really happy with how webpages scroll up or down either, feels as if my swipes are lightly registered thus a sluggish movement upward or downward.. I hope this is not yet another issue that i have to deal with because my unit already had a wifi defect and, despite being happy with this device it might be my last. It's just too troublesome. Unless my stupid provider replaces it but i could keep dreaming.
shadehh said:
... Now the way i recall my samsung galaxy s, it would register a click sometimes even when you're hovering about 0.5mm to 1mm above it.
1. Try to click on an app, however, do this without applying any pressure, simply touching your touchscreen (might have to do this slowly). Does it respond? Or is it the same with with you as it is with me?
2. Please report in on the behavior of your touchscreen.
Click to expand...
Click to collapse
0,5 - 1mm ? do you even realize how big this distance is? No way the SGS would register that... or react on that. (I come from that phone too)
with that in mind, my One X is much more responsive as the SGS or any other phone I had.
And no, I do not need to press. As the slightest pressure gives my screen ripples. not possible.
Either try another kernel if you have some custom one, I know there was some problems with those sometimes. Or factory reset if you are stock and then return it?
PAGOT said:
0,5 - 1mm ? do you even realize how big this distance is? No way the SGS would register that... or react on that. (I come from that phone too)
with that in mind, my One X is much more responsive as the SGS or any other phone I had.
And no, I do not need to press. As the slightest pressure gives my screen ripples. not possible.
Either try another kernel if you have some custom one, I know there was some problems with those sometimes. Or factory reset if you are stock and then return it?
Click to expand...
Click to collapse
Well maybe i exaggerated the hovering part but within a certain (very small distance, probably 0,2 maybe even 0,1 the screen would react).
I've been from viper, to jelly bean roms, to ARHD and Maximus. Same thing.
edit: actually, 0,5 mm is hardly anything if you look at how big a mm is and put and reduce the distance by 50%, anyway that's not the discussion http://www.meb.uni-bonn.de/Cancernet/Media/CDR0000578121.jpg
Hover taps/clicks happen, I'm sure I haven't touched the screen a couple of times but it responded to what I wanted to do. Anyways, try this app called touchscreen test to confirm your issue.
death__machine said:
Hover taps/clicks happen, I'm sure I haven't touched the screen a couple of times but it responded to what I wanted to do. Anyways, try this app called touchscreen test to confirm your issue.
Click to expand...
Click to collapse
So you are implying that hovering touch seems to work on your Hox?
Hovering also works with my HOX. And I don't have to use any pressure, hardly even touch the screen.
Sent from my HTC One X using xda app-developers app
Same here. Hardly touching screen and still responds. I'm running stock 1.29.
Sent from my HTC One X using xda app-developers app
..mhm well how should I go on about this? I mean the people at the shop are not the brightest.. I gotta send it in though. It is annoying
Sent from my HTC One X using xda app-developers app
Tell them the digitizer is faulty and needs to be changed.
Simple problem, I live in the UK so the weather isn't exactly brain freezing but at 3 degree Celsius or below the screen just doesn't want to respond AT ALL, the phone is perfectly fine because buttons work and such it's just the touch screen and the touch buttons also the weirdest thing is after restarting the phone when this occurs the screen magically works again however after few minutes of cold weather will disable the touch capabilities. Should I claim on warranty? I really cant be arsed for 2 weeks without my phone, I'm quite addicted to it.
Also I have smashed the screen in the past and had it replaced by HTC if that matters however I can't tell if this issue existed before that because it wasn't exactly cold then. Please give me some good advice?
AW: [Q] HTC One X touch screen not working in cold weather.
What's your job? I mean where do you work? While I was working for an art exhibition, my fingertips skinlayer got really really thick because I did worked with pug
After that, touchscreens didn't respond to my fingers at all
nitrous² said:
What's your job? I mean where do you work? While I was working for an art exhibition, my fingertips skinlayer got really really thick because I did worked with pug
After that, touchscreens didn't respond to my fingers at all
Click to expand...
Click to collapse
I'm a college student, my finger tips are definitely soft lmao! No that's not the issue because after restarting the phone everything is fine and my hands are rather warm, I actually thought about that and even tried licking the screen, didn't work.
pro_Ove said:
I'm a college student, my finger tips are definitely soft lmao! No that's not the issue because after restarting the phone everything is fine and my hands are rather warm, I actually thought about that and even tried licking the screen, didn't work.
Click to expand...
Click to collapse
Dude!....never ever lick a screen ! It has more backteria on it than a toilet seat of a highway rest! Anyways, send it back to warranty would be an idea. If it comes to software, you'll most propably get help, but if it comes to hardware, things will get difficult.
Relevant info about licking smartphone screens here: https://www.youtube.com/watch?v=MVpkeBYZOrE&feature=youtube_gdata_player
And regarding topic: I succesfully used my HOX at minus 22 celsius the other day so plus 3 shouldn't be any issue.
Sent from my One X
I truly don't care, the less bacteria we intake the weaker we are against them
I actually watched that video, I'm subscribed to vsauce
So I should send it off then? Will HTC have any issues with doing this within the warranty? I assume it's their fault I did notice that in the dark the bottom of the screen reveals a little gap where the light from the screen/buttons is shining through, it's not impractical just a little bit annoying and makes it seem like they didn't fit the screen 100% properly also the right edge of the screen seems to be darker, for example if I open something white on the screen it seems as if there was a shadow coming from the right edge of the screen.
Posting an update for future reference. The device has been sent of to HTC on the 18th of Feb and returned today however there was no email or nothing informing me about return of the device, not only that they haven't included any document stating what has been done to the phone if anything has been done at all (except of a hard reset ofc). The gap at the bottom is still there and light shines through it as much as ever, the device came completely dead without any charge what so ever, I have now stuck it in the freezer and after 20 minutes I will check on it to see if my issue still persists, if it does then HTC is just a joke of a company.
At least the haven't charged me... yet. Will post an update.