Related
sup guys!
I would like to have the JB update from ARHD 16 but im totally lost in the proces of how to do it.
i succesfully unlocked the bootloader
Installed Custom recovery and did a nandroid backup
also my phone is rooted
-Downloaded the custom rom
-Downloaded the flash boot IMG
soo what is the exact thing i need to do know? i know i need to update Hboot.. but when and how. also i want a custom kernel for max battery life.. IM CONFUSED!?!
with my motorola defy it was so easy..
First you need to update your HBOOT.
Easiest way is using >> THIS tools thanks to Stuart001.
After you succesfully done that you can flash the rom, a rom flash instruction is described in rom thread where you download the rom.zip.
Normal steps go like this:
upload downloaded rom.zip to storage on your device
flash boot.img
clear cache
install rom.zip using recovery option
Aroma installer (in rom.zip) has an option to wipe your device, I suggest you do that during rom install as well.
Of course this will erase all data, I'm just trying to help and don't take any responsibility.
if you have a supporting cid. Then only you can install jb sense roms.
ah nevermind. already found out how by chrashing my phone haha. i already solved it and now running custom rom!
Hello all,
Please can someone help me??
I have a HTC One X, I have unlocked my phone on HTCDev, it is showing as rooted (not broken lol) and i can add superuser on there.
I have CWM installed v.5.8.4.0 however, when looking in the ROM Manager, trying to update it is shows me 6.0.4.7 under recovery setup. but when i boot into recovery it still shows me 5.8.4.0??
I have been trying to install the Beanstalk-4.4.240-20140206-endeavouru.zip...
I keep getting stuck in the installation with the message status 7 and then installation stops..
I have cleared all the files and cache that is required prior and still fails. I have tried removing the assert / getpro lines and I still get status 7 during installation.
I have tried a few different ROMs all telling me they are for HTC One X (so i am guessing these just are the right ROMs)
The only think i can see i have is that i have S-On, but i cannot seem to find anywhere to turn this off.. Is this the only reason it is not working????
I have tried another recovery images as well and still no luck?? (unless i did that wrong)
Please can someone help me, I would really like to put a Kitkat ROM on my phone as HTC are not going to get this done..
Ditch rommanager, it does not work on a s-on hox. Second you need to flash a kitkat recovery to install kitkat roms and a sense recovery to install sense 5 roms or earlier build aosp roms.
So for kitkat download the latest philz touch recovery available, and if you want sense based roms i suggest to use philz touch 5.15......
You have to flash boot.img & recoverys via fastboot (pc) to the phone !
Mr Hofs said:
Ditch rommanager, it does not work on a s-on hox. Second you need to flash a kitkat recovery to install kitkat roms and a sense recovery to install sense 5 roms or earlier build aosp roms.
So for kitkat download the latest philz touch recovery available, and if you want sense based roms i suggest to use philz touch 5.15......
You have to flash boot.img & recoverys via fastboot (pc) to the phone !
Click to expand...
Click to collapse
Thank you , do you by any chance know where i can get these files? sorry for asking, been at this all day and not getting anywhere :crying:
I think this thread explains it pretty well
http://forum.xda-developers.com/showthread.php?t=1605720
Mr Hofs said:
I think this thread explains it pretty well
http://forum.xda-developers.com/showthread.php?t=1605720
Click to expand...
Click to collapse
Thank you i have checked this out.. but i can only find the Philz touch 6.19.3 clockworkmod 6.0.4 so i have updated
Just a slight issue now where i am cleaning all what has to be cleared and then installing the ROM and GAPP which both are now installing by the look of it and no errors.. but i am looping back into Philz touch rather than the phone restarting.. Even if i restore the previous version it still comes back to Philz touch..
do you know why this is happening? I tried CM11 Rom and also the Beanstalk 4.4 ROM (As well as restore) all coming back to recovery mode.. Im lost now
Try this recovery and flash a sense 5 rom to check if that works. It should not boot back.to the recovery.
https://www.dropbox.com/s/yqzlpqo8illa53j/Philz recovery 5.15.9.img
And can you post the outcome of :
Fastboot getvar all
And delete the imei and serial number before posting it !!
ok the 5.15 installed fine, but the images here are giving me status 7 and restore is not working for me from here either
i have attached the getvar all outcome
The specs are fine, download a sense 5 rom like viper X or arhd. And install it like this :
Flash the boot.img of the rom !
Then enter the recovery and make a FULL wipe :
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format cache , data and system
Then install the rom (if you go for viper you select cache wipe only and full rom install in the aroma)
ok I realised i didn't do the boot.img correctly.. i tried it again now but went back to Touch 6 and the Beanstalk has installed YAY!! :laugh:
You said "download a sense 5 rom like viper X or arhd" are these better than Beanstalk? I am asking as this is my first 4.4 ROM i have installed...?
I do have to say i do like the sense 5 so wondering if it is worth changing ROM to what you are suggesting?
Otherwise it is now working... Thank you heaps for all your help
Ah no there is no "better" rom. I suggested these because i have experience with these roms. Just for testing purposes.
But all is fine. And you know how to flash so all good.
CASE CLOSED !
hey, I need your help:
I was on OmniROM and wanted to install B125, I installed B118 Recovery and got:
Checking Module Verlist...
Huawei SD card update fail
I tried several recoveries and firmwares, no luck.
then in one thread I saw that I have to flash boot.img and then recovery,img. done. and now my phone is stuck at splash screen.
I can enter recovery but it wont install anything.
Please quick help , it's 1:45 am here in germany and I need to get up at 6:30 and my P6 is my alarm!!!
DrRammel said:
hey, I need your help:
I was on OmniROM and wanted to install B125, I installed B118 Recovery and got:
Checking Module Verlist...
Huawei SD card update fail
I tried several recoveries and firmwares, no luck.
then in one thread I saw that I have to flash boot.img and then recovery,img. done. and now my phone is stuck at splash screen.
I can enter recovery but it wont install anything.
Please quick help , it's 1:45 am here in germany and I need to get up at 6:30 and my P6 is my alarm!!!
Click to expand...
Click to collapse
Hope you fixed it already.
If not, try this.
http://dl.dbank.com/xhtml/link/resource.jsp?id=c01l4l4a2y&opt=101&e_r_auth=1&pid=38#
Put the downgrader in dload. After it is done, install your b125.
Make sure you thank @iwtfmcl who discovered it here:
http://forum.xda-developers.com/showthread.php?p=52164529
Sent from my P6-U06
bokchoi2020 said:
Hope you fixed it already.
If not, try this.
http://dl.dbank.com/xhtml/link/resource.jsp?id=c01l4l4a2y&opt=101&e_r_auth=1&pid=38#
Put the downgrader in dload. After it is done, install your b125.
Make sure you thank @iwtfmcl who discovered it here:
http://forum.xda-developers.com/showthread.php?p=52164529
Sent from my P6-U06
Click to expand...
Click to collapse
Yes, I saw that yesterday and put it on SD, but when I select "Install update so sd card", i go to dload folder and it's empty (yes, I checked if the UpdATE.APP is in there)
I installed recovery for b118 first and the boot.img and recovery from b506
so, my phones turns on, I can see the Huawei splashscreen. I can enter recovery as well. and my PC recognizes the phone.
My recovery wont install anything though.
So, can I flash some sort of recovery in this situation? Because I think that flashing the boot.img removed my ROM.
DrRammel said:
Yes, I saw that yesterday and put it on SD, but when I select "Install update so sd card", i go to dload folder and it's empty (yes, I checked if the UpdATE.APP is in there)
I installed recovery for b118 first and the boot.img and recovery from b506
so, my phones turns on, I can see the Huawei splashscreen. I can enter recovery as well. and my PC recognizes the phone.
My recovery wont install anything though.
So, can I flash some sort of recovery in this situation? Because I think that flashing the boot.img removed my ROM.
Click to expand...
Click to collapse
To revert on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y# via local update, after that you can flash 4.2.2 without issues again via local update.
Another link for the download in case it is slow from the first one https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4
tileeq said:
To revert on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y# via local update, after that you can flash 4.2.2 without issues again via local update.
Another link for the download in case it is slow from the first one https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4
Click to expand...
Click to collapse
I cant install anything. can I flash something with PC when I'm in recovery? I think my device works but I have no ROM and I cant flash anything.
I need to make the P6 work, please help..
DrRammel said:
Yes, I saw that yesterday and put it on SD, but when I select "Install update so sd card", i go to dload folder and it's empty (yes, I checked if the UpdATE.APP is in there)
Click to expand...
Click to collapse
I don't think you can use stock recovery to pick update.app from folder. You have to use 3 button power up method.
Just place update.app in dload folder on external SD card.
From the links i shared before you can get a dload/update.app that you need to put on sd card and update through the stock recovery before you try updating actual stock rom(4.2.2)
tileeq said:
To revert on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y# via local update, after that you can flash 4.2.2 without issues again via local update.
Another link for the download in case it is slow from the first one https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4
Click to expand...
Click to collapse
The term local update refers to update that you do from working ROM, meaning you are able to go to System updates when ROM is running and choose Local update from SD card.
In this case it has to be done by what's called forced update, 3 button power up method.
I know what you all mean and i tried many times but it wont install anything now! First I got fail, I couldnt choose a updat.app even though it was on sd.
Now it doesnt even load the whole recovery...
And I dont have a rom, when I reboot I am stuck at splash screen.
And the 3 botton method didnt work, after that i selected from sd card but no luck..
is on its way to repair centre right now..
DrRammel said:
hey, I need your help:
I was on OmniROM and wanted to install B125, I installed B118 Recovery and got:
Checking Module Verlist...
Huawei SD card update fail
I tried several recoveries and firmwares, no luck.
then in one thread I saw that I have to flash boot.img and then recovery,img. done. and now my phone is stuck at splash screen.
I can enter recovery but it wont install anything.
Please quick help , it's 1:45 am here in germany and I need to get up at 6:30 and my P6 is my alarm!!!
Click to expand...
Click to collapse
Hello !
Sorry to tell you, but from start you did a wrong step ! First if you was on OmniROM, you must flash ONLY stock recovery for KitKat and not for JB ! From here start all issues in your device !
To avoid any issue , when you use a custom rom based KitKat and you want to downgrade to JB , first you must put your device to Stock Huawei KitKat ( doesn't matter if is beta, B506 or B507 ) ! To install Stock Huawei KitKat - you must to flash stock recovery KitKat - and than flash UPDATE.APP from /dload folder ( where UPDATE.APP is stock firmware Huawei KitKat ) !
Now you should follow the intermediate steps to be able to downgrade to JB ( by installing aditional update.app )
Anyway good luck, and I hope you can solve this issue !
Edit :
You can try this stuff :
First, use your PC with a new microSD to copy UPDATE.APP ( from Huawei KitKat ) in /dload folder !
Go here and take stock recovery for Huawei KitKat ;
Put your microSD already prepared on your device and connect USB cable! Put your device in bootloader mode ( just keep pressing power button and volume down more than 10sec ) - now you should be able to flash stock recovery in your device > fastboot flash recovery recovery.img ; and reboot your device > fastboot reboot ! Right now you can reboot in stock recovery ( adb reboot recovery or using combo key ) and start flash UPDATE.APP !
surdu_petru said:
Hello !
Sorry to tell you, but from start you did a wrong step ! First if you was on OmniROM, you must flash ONLY stock recovery for KitKat and not for JB ! From here start all issues in your device !
To avoid any issue , when you use a custom rom based KitKat and you want to downgrade to JB , first you must put your device to Stock Huawei KitKat ( doesn't matter if is beta, B506 or B507 ) ! To install Stock Huawei KitKat - you must to flash stock recovery KitKat - and than flash UPDATE.APP from /dload folder ( where UPDATE.APP is stock firmware Huawei KitKat ) !
Now you should follow the intermediate steps to be able to downgrade to JB ( by installing aditional update.app )
Anyway good luck, and I hope you can solve this issue !
Click to expand...
Click to collapse
Thanks man for helping me out but I'm dumb, if I WAITED; i wouldnt have this problem...
#
anyway, I already sent device to huawei a few hours ago, I hope I'll get a new device, I have warranty still..
Thanks to all, now everyone can see how to downgrade!
DrRammel said:
Thanks man for helping me out but I'm dumb, if I WAITED; i wouldnt have this problem...
#
anyway, I already sent device to huawei a few hours ago, I hope I'll get a new device, I have warranty still..
Thanks to all, now everyone can see how to downgrade!
Click to expand...
Click to collapse
Ok, good luck !
This is the reason why I always recommended to use JB Rom with JB Recovery and KitKat Rom with KitKat Recovery - to avoid any issues! :good:
Hi Guys,
had the same issue today, but thank god i was still able to boot on a bugged omni room to copy file back and forth on my sd card.
But i still cannot find any way back to 4.2...
I tried the steps which surdu_petru write down but i still have the same error message
Checking Module Verlist...
Huawei SD card update fail.
Maybe i made a mistake but these were the steps that i tried:
I`m on the Omni Rom 4.4.2 right now with trwp 2.7.0.0
1. i prepared a microsd with the dload folder of the stock b506 from the huawei site
2. i flashed the stock recovery (B506) from THAT post
3. rebooted the phone and pressed volume plus and minus
4. and then the error message appeard
Maybe someone can explain me step by step how the downgrade works, would like to see the b125 stock on my phone
Thank you!
Sorry for my bad english
n00del said:
Hi Guys,
had the same issue today, but thank god i was still able to boot on a bugged omni room to copy file back and forth on my sd card.
But i still cannot find any way back to 4.2...
I tried the steps which surdu_petru write down but i still have the same error message
Checking Module Verlist...
Huawei SD card update fail.
Maybe i made a mistake but these were the steps that i tried:
I`m on the Omni Rom 4.4.2 right now with trwp 2.7.0.0
1. i prepared a microsd with the dload folder of the stock b506 from the huawei site
2. i flashed the stock recovery (B506) from THAT post
3. rebooted the phone and pressed volume plus and minus
4. and then the error message appeard
Maybe someone can explain me step by step how the downgrade works, would like to see the b125 stock on my phone
Thank you!
Sorry for my bad english
Click to expand...
Click to collapse
You should perform an intermediate step by installing a small update.app before to be able to downgrade to JB ! Solution a few posts above (try to read them all to see what you missed).
u mean that dload from that chinese download site? i tried to flash this with the same method like the stock B506 but it also fails.
l
n00del said:
u mean that dload from that chinese download site? i tried to flash this with the same method like the stock B506 but it also fails.
l
Click to expand...
Click to collapse
Since you have working ROM, try to flash that small update.app with normal update process via System updates-Update from SD card, if 3 button method fails.
what i tried:
1. omnirom 4.4.2 with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash Kitkat b506 -> failed
2. modified b506 custom rom with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash that small update app from this chinese site -> failed
3. modified b506 custom rom with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash stock b125 -> failed
4. omnirom 4.4.2 with trwp 2.7.0.0 -> flash b118 stock recovery -> reboot-> phone keeps vibrating and nothing works until i reflash trwp or kitkat stock
failed = Checking Module Verlist... Huawei SD card update fail
n00del said:
what i tried:
1. omnirom 4.4.2 with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash Kitkat b506 -> failed
2. modified b506 custom rom with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash that small update app from this chinese site -> failed
3. modified b506 custom rom with trwp 2.7.0.0 -> flash kitkat stock recovery -> flash stock b125 -> failed
4. omnirom 4.4.2 with trwp 2.7.0.0 -> flash b118 stock recovery -> reboot-> phone keeps vibrating and nothing works until i reflash trwp or kitkat stock
failed = Checking Module Verlist... Huawei SD card update fail
Click to expand...
Click to collapse
You should try to wipe cache , data and dalvik-cache ( on twrp ) , than flash stock recovery in this way :
Reboot -> Bootloader ;
fastboot flash recovery recovery.img
press combo key to boot on stock recovery ;
DrRammel said:
hey, I need your help:
I was on OmniROM and wanted to install B125, I installed B118 Recovery and got:
Checking Module Verlist...
Huawei SD card update fail
I tried several recoveries and firmwares, no luck.
then in one thread I saw that I have to flash boot.img and then recovery,img. done. and now my phone is stuck at splash screen.
I can enter recovery but it wont install anything.
Boot and recovery are 4.2.2? or have something old? How can I check?
Please quick help , it's 1:45 am here in germany and I need to get up at 6:30 and my P6 is my alarm!!!
Click to expand...
Click to collapse
I had the same.
I put it in dload that: http://dl.vmall.com/c01l4l4a2y# via local update, after that you can flash 4.2.2 without issues again via local update.
Another link for the download in case it is slow from the first one https://mega.co.nz/#!9oEHUTiR!uVKEq6...QZ5yrnedx4rug4
I managed to get back to 4.2.2
Now I installed 4.2.2 b610 vodafone dload method.
Boot and recovery are 4.2.2? or have something old? How can I check?
So i tried to wipe cache, data and dalvik cache on twrp 2.7.0.0 and rebooted into bootloader and flashed the stock KK recovery from the thread.
Then i booted my phone up into the stock recovery and it tried to flash the B506 dload with the same error.
I also tried to flash the small update.app without success
I am on 4.1.2
Ive used all 3 available custom recoveries, 4 if you include the other TWRP
Every recovery with every zip, all md5 checked, say unable to open zip
Am I doing something wrong?
shaunjohn said:
I am on 4.1.2
Ive used all 3 available custom recoveries, 4 if you include the other TWRP
Every recovery with every zip, all md5 checked, say unable to open zip
Am I doing something wrong?
Click to expand...
Click to collapse
What are you trying to flash?
And which recovery VERSION are you using?
Model aand name of rom
Which model do you have?? and what is the rom's name?
210r
ive tried
philz recpvery
cwm
twrp 2/7 and 2/8
ive tried
cm11
rocket
swat(name may be wrong)
kids
Reflash the 4.4.2 firmare from odin all over again and install TWRP (2.8.0.0) the flash rom in recovery
A friendly reminder - please keep all question threads in the Q&A board. Android dev is only for posting releases, not questions.
Thanks!
Same Result
ruzell said:
Reflash the 4.4.2 firmare from odin all over again and install TWRP (2.8.0.0) the flash rom in recovery
Click to expand...
Click to collapse
same result, error opening zip file
Did you ever figure this out? I"m having the same issue.
Can't flash a ROM on Tab 3 7.0 t210r
I am rooted, first thing I did after purchase.
Am currently running 4.1.2, build jzo54k.t210rueamk1
I have flashed PhilZ Touch 6, 6.44.9, ClockworkMod 6.0.4.9 from here:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
I have tried to flash the following ROMs:
Stockrom Series Ultimate Edition
http://forum.xda-developers.com/showthread.php?t=2489395
RocketTab v3.1
http://forum.xda-developers.com/showthread.php?t=2507772
Flash fails with:
Installation aborted (bad), can't open <path to zip file><name of zip>
This happens after a factory reset, wipe data, cache.
I have a Samsung S3 that I have rooted, and then flashed many times. Before that I had an HTC EVO. I am not new to the process, but apparently I am missing something here.
Got any suggestions?
Which Odin Version you are used to install The Recovery? Try an other Version.
Is your Rom on The micro Sdcard ? If you use Philz so is The max capacity 32 GB, if you use TWRP so is max 64 GB supported.
starmaha said:
I am rooted, first thing I did after purchase.
Am currently running 4.1.2, build jzo54k.t210rueamk1
I have flashed PhilZ Touch 6, 6.44.9, ClockworkMod 6.0.4.9 from here:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
I have tried to flash the following ROMs:
Stockrom Series Ultimate Edition
http://forum.xda-developers.com/showthread.php?t=2489395
RocketTab v3.1
http://forum.xda-developers.com/showthread.php?t=2507772
Flash fails with:
Installation aborted (bad), can't open <path to zip file><name of zip>
This happens after a factory reset, wipe data, cache.
I have a Samsung S3 that I have rooted, and then flashed many times. Before that I had an HTC EVO. I am not new to the process, but apparently I am missing something here.
Got any suggestions?
Click to expand...
Click to collapse
bierma32 said:
Which Odin Version you are used to install The Recovery? Try an other Version.
Is your Rom on The micro Sdcard ? If you use Philz so is The max capacity 32 GB, if you use TWRP so is max 64 GB supported.
Click to expand...
Click to collapse
I didn't use Odin to flash the recovery. Downloaded the zip and flashed via recovery.
I have tried with the ROM on the external and internal SD. Same results.
32GB SD.
starmaha said:
I didn't use Odin to flash the recovery. Downloaded the zip and flashed via recovery.
I have tried with the ROM on the external and internal SD. Same results.
32GB SD.
Click to expand...
Click to collapse
u
How do you rooted your Tab?
With Stockrecovery you can not flash a Rom or Recovery.
Flash Philz or TWRP With Odin, reboot to The New flashen Recovery , than you can install a Rom.
All information for The right steps you will find at dev Sektion.
bierma32 said:
u
How do you rooted your Tab?
With Stockrecovery you can not flash a Rom or Recovery.
Flash Philz or TWRP With Odin, reboot to The New flashen Recovery , than you can install a Rom.
All information for The right steps you will find at dev Sektion.
Click to expand...
Click to collapse
To clarify, when I initially rooted, I used Odin to flash recovery and root.
starmaha said:
To clarify, when I initially rooted, I used Odin to flash recovery and root.
Click to expand...
Click to collapse
At first we are turn us i The circle,but now we can come to your prob.
Flash a Rom and make a picture and post that here. So we can See The error message and your Recovery.
starmaha said:
To clarify, when I initially rooted, I used Odin to flash recovery and root.
Click to expand...
Click to collapse
Sounds like the rom download is bad. Check the md5 of the rom before trying to install.
Kind of success. I downloaded the same version of PhilZ, for Odin, on my laptop.
I put the tablet in download mode and flashed the recovery with Odin.
I downloaded the ROM again (http://forum.xda-developers.com/gal...m-stockrom-kitkat-version-16-08-2014-t2849742). This is one I had tried before. This time to my laptop and copied it to the tablet. The other times, I had downloaded the ROM directly onto the tablet.
While it was in the process of flashing, there were some video anomolies.
I rebooted the tablet into recovery and flashed the ROM. It hung on SAMSUNG for a very long time after the flash and reboot. I powered it off and rebooted. It booted completely this time, but not without some issues. The first thing was when the message pops up that Android is optimizing apps. That bar was all screwy looking, snowy. (see attached image)
Once I got to the lock screen and entered the pin, the screen "fractured", pieces shifted around, and the tablet locked up. I wish I had taken a picture of it. Never seen anything like it.
I had not done a data wipe yet. I did a data wipe, rebooted, entered the pin, tablet locked up again.
I then was going to restore the backup I made before the flashing. It wouldn't restore because of an MD5 mismatch. I had restored this backup previously with no problem.
I restored an older backup and then spent a couple of hours getting everything back to the level of the now broken backup.
Flash nolekat and all went fine.
I've had problems as well. I normally flash via a recovery. At times I'll have an md5 mismatch or it just doesn't work; I've even backed up a working ROM only to find out I can't restore the same backup. Seems like a hit or miss with me
I tried flashing NoleKat and it failed on me too.
[/COLOR]
bierma32 said:
At one of your post you write after flashing you must put in the Pin?
So you have make not a clean install or factory reset, you done a wipe cache and wipe dalvik.
You must do a clean install if you come from different Roms or Version.
Click to expand...
Click to collapse
Please post a picture from your Recovery with the error message.
hi
today when i installed both cm13 and ressurrection remix on g8 rio-l01 after optimising apps phone started too reboot infinitly and dosent boot up and gets stuck at boot animation and reboots can u plz help me how to fix this problem and install custom rom?
titan5800 said:
hi
today when i installed both cm13 and ressurrection remix on g8 rio-l01 after optimising apps phone started too reboot infinitly and dosent boot up and gets stuck at boot animation and reboots can u plz help me how to fix this problem and install custom rom?
Click to expand...
Click to collapse
Do you wiped : data, system, cache & dalvik-cache before flash can-13.0 ? ... because if you come from stock 5.1 , device will not boot on 6.0 if you keep older data .
surdu_petru said:
Do you wiped : data, system, cache & dalvik-cache before flash can-13.0 ? ... because if you come from stock 5.1 , device will not boot on 6.0 if you keep older data .
Click to expand...
Click to collapse
i wiped everything and device boots but after optimising apps its keeps rebooting infinitly
titan5800 said:
i wiped everything and device boots but after optimising apps its keeps rebooting infinitly
Click to expand...
Click to collapse
What TWRP do you use ?
surdu_petru said:
What TWRP do you use ?
Click to expand...
Click to collapse
latest 3.0.2.0 i guess
surdu_petru said:
What TWRP do you use ?
Click to expand...
Click to collapse
is there anyway that i can fix it?after the modified cust didnt work i resotred backup and tried cm13 or ressurrection remix but this happend
surdu_petru said:
What TWRP do you use ?
Click to expand...
Click to collapse
will reinstalling clean b160 rom again and reunlocking the phone and installing cm13 help me?
titan5800 said:
will reinstalling clean b160 rom again and reunlocking the phone and installing cm13 help me?
Click to expand...
Click to collapse
Please, can you tell me how you installed CM-13.0, step by step ? Thanks ...
surdu_petru said:
Please, can you tell me how you installed CM-13.0, step by step ? Thanks ...
Click to expand...
Click to collapse
well my english is not very good but ill try...
first of all i tried to install official b340 firmware on my c900b160 g8 using your modified cust.img but it failed and didnt work so i restored original cust and restored the backup i made with twrp before doing anything to phone and phone boot up perfectly and everything working then i went and tried to install resurrection remix rom ( i tried it with or without gapps ) and i got stuck at boot loop problem after optimising apps then i thought the problem is with remix rom and i installed cm13 rom but it also went in boot loop now im running phone with the backup i had and trying to find a solution to install custom rom.+i had installed many custom roms on other phones before and i did the insturction of installations compltely ( wiping and ... before rom install ) the problem is that the phone boots up successfully first time after rom installation but after optmising apps part it goes reboot and never boots again (my steps on installing rom : copied the files needed into my sd then went in twrp and wiped everything then installed the rom and then wiped cache again and rebooted into system and then the problem happend)
it was all i did with the phone. ( i just want to get rid of huawei's slow ui and rom )
titan5800 said:
well my english is not very good but ill try...
first of all i tried to install official b340 firmware on my c900b160 g8 using your modified cust.img but it failed and didnt work so i restored original cust and restored the backup i made with twrp before doing anything to phone and phone boot up perfectly and everything working then i went and tried to install resurrection remix rom ( i tried it with or without gapps ) and i got stuck at boot loop problem after optimising apps then i thought the problem is with remix rom and i installed cm13 rom but it also went in boot loop now im running phone with the backup i had and trying to find a solution to install custom rom.+i had installed many custom roms on other phones before and i did the insturction of installations compltely ( wiping and ... before rom install ) the problem is that the phone boots up successfully first time after rom installation but after optmising apps part it goes reboot and never boots again (my steps on installing rom : copied the files needed into my sd then went in twrp and wiped everything then installed the rom and then wiped cache again and rebooted into system and then the problem happend)
it was all i did with the phone. ( i just want to get rid of huawei's slow ui and rom )
Click to expand...
Click to collapse
Yep, but I do not understand how you installed CM-13.0 ? ... exactly what you installed ( flashed )
surdu_petru said:
Yep, but I do not understand how you installed CM-13.0 ? ... exactly what you installed ( flashed )
Click to expand...
Click to collapse
after i returned into stock rom using backup i wiped the phone using twrp and then installed the downloaded zip from cm13 rom page and then tried to boot the phone and then the problem happend thats all
titan5800 said:
after i returned into stock rom using backup i wiped the phone using twrp and then installed the downloaded zip from cm13 rom page and then tried to boot the phone and then the problem happend thats all
Click to expand...
Click to collapse
But, do you already read Installations instructions from CM-13.0
surdu_petru said:
But, do you already read Installations instructions from CM-13.0
Click to expand...
Click to collapse
* Your Device Must Have Installed The Last Update TWRP 3.0.2-0 !
Perform a backup , to be able quickly to back to stock ( recommended : System, Data, Custom & Boot ) !
Wipe : Cache, Dalvik, System, Data , ( please "format data" & reinstall rom, if some apps/services stop working );
Flash The CyanogenMod ROM ;
Add more Zips ;
Flash OpenGAPPS ( 6.0 ARM64 version );
Wipe Cache & Dalvik ;
Reboot To System ;
titan5800 said:
* Your Device Must Have Installed The Last Update TWRP 3.0.2-0 !
Perform a backup , to be able quickly to back to stock ( recommended : System, Data, Custom & Boot ) !
Wipe : Cache, Dalvik, System, Data , ( please "format data" & reinstall rom, if some apps/services stop working );
Flash The CyanogenMod ROM ;
Add more Zips ;
Flash OpenGAPPS ( 6.0 ARM64 version );
Wipe Cache & Dalvik ;
Reboot To System ;
Click to expand...
Click to collapse
Sorry, but is your fault ... you should respect the appropriate Installation instructions ... In OP, when you try do download a update of CM-13.0, you get to the download page of the update rom , and here you have all about this update : changelog, downloads link and also Installation instructions !
Good luck !
surdu_petru said:
Sorry, but is your fault ... you should respect the appropriate Installation instructions ... In OP, when you try do download a update of CM-13.0, you get to the download page of the update rom , and here you have all about this update : changelog, downloads link and also Installation instructions !
Good luck !
Click to expand...
Click to collapse
arent these the correct stpes? what could possibly go wrong when i do all these steps and it said in rom page
titan5800 said:
arent these the correct stpes? what could possibly go wrong when i do all these steps and it said in rom page
Click to expand...
Click to collapse
Please, just check again ... you will see the appropriate installation instructions on the same page with the download link ... now, you got it ?
Edit :
On the last update from cm-13.0 , there is also a FAQ ... apparently you did not read the entire post , you only downloaded the rom and installed ? ... than, why there is Installation instructions and FAQ ???
Instalations :
Code:
[CENTER]* please use always the last release for [URL="http://opengapps.org/"]Gapps[/URL] & [URL="http://forum.xda-developers.com/showpost.php?p=66171376&postcount=37"]TWRP[/URL] !
* this build update does not contain Gapps ;
* for update rom, please only wipe : cache & dalvik-cache ;
* you should also flash [B][I]modem_update.zip[/I][/B] ;
* modem_update.zip not required to be flashed ONLY for devices fully updated to Huawei MM !
* if you are at the first install of this rom, please check OP Installation instructions !
[/CENTER]
Click to expand...
Click to collapse
FAQ :
Battery 100% charged issue :
* if you have issue with battery percentage displayed, please connect USB cable and perform this action from your PC : "adb reboot" !
* battery stuck on 100% - showing charged ... issue not yet solved ( currently do not know if it's because kernel or Qualcomm framework blobs ) : I hope to be solved soon .
Device not Boot :
* if you come from previous release of CM-13.0 and you didn't updated modem by flashing modem_update.zip !
* if you come from Stock Huawei MM ( but not fully updated via UPDATE.APP ) - first, you should go back to Stock Huawei 5.1 !
Click to expand...
Click to collapse
So, you lose two days trying to fix something instead to read the entire post
surdu_petru said:
Please, just check again ... you will see the appropriate installation instructions on the same page with the download link ... now, you got it ?
Edit :
On the last update from cm-13.0 , there is also a FAQ ... apparently you did not read the entire post , you only downloaded the rom and installed ? ... than, why there is Installation instructions and FAQ ???
So, you lose two days trying to fix something instead to read the entire post
Click to expand...
Click to collapse
finally i managed to install cm13 successfully. when i flashed modem-update.zip phone boot up perfectly
thanks for helping me but i have a problem now when i set pin code lock in screen lock option the setting still shows swipe and when i retry to change it again the setting crashes and cant change it again without a full reset this bug i found for now