Develop Bugs

Please help me !

So, i had the stock Huawei JB 4.2.2 ROM. I wanted that : http://forum.xda-developers.com/showthread.php?t=2735940
I did as said.
Downloaded the ROM
Wiped everything it says
Installed the ROM
Now i get the Huawei Ascend flash screen in the beginning and that's it! I tried to flash stock ROM again, but it says that Install aborted.
I just got that phone and would really appreciate your help !

Lendorav said:
So, i had the stock Huawei JB 4.2.2 ROM. I wanted that : http://forum.xda-developers.com/showthread.php?t=2735940
I did as said.
Downloaded the ROM
Wiped everything it says
Installed the ROM
Now i get the Huawei Ascend flash screen in the beginning and that's it! I tried to flash stock ROM again, but it says that Install aborted.
I just got that phone and would really appreciate your help !
Click to expand...
Click to collapse
Hi!
Please , put stock recovery back to be able to flash stock rom !
Now just remove the memory card, and go to stock recovery by pressing combo key . Here you must wipe cache ! Put your memory sdcard back ( make sure you already have /dlaod/UPDATE.APP into it) , and reboot again into recovery ! Installation will begin automatically .... ( your device must not be connected with USB cable )
Good luck .

Lendorav said:
So, i had the stock Huawei JB 4.2.2 ROM. I wanted that : http://forum.xda-developers.com/showthread.php?t=2735940
I did as said.
Downloaded the ROM
Wiped everything it says
Installed the ROM
Now i get the Huawei Ascend flash screen in the beginning and that's it! I tried to flash stock ROM again, but it says that Install aborted.
I just got that phone and would really appreciate your help !
Click to expand...
Click to collapse
Most important step many people miss:
Any time you are going to flash new ROM you should make backup with TWRP, since you already have TWRP installed. That way if flash fails you can simply restore your previous ROM without any hassle.
I am surprised that you flash failed if you followed instructions and wiped everything except internal and external storage.

[help thread] [ask any question] [noob friendly]

typically reply under an hour
edit: if other members knows the solution who comes across any query in this thread then please help each other, every single help is appreciated.

Volte is not working in in any rom except AICP
Volte is not working in any other rom in my device a6020a46 although volte provisioned flag is on plzz help me

Ashutoshpatel444 said:
Volte is not working in any other rom in my device a6020a46 although volte provisioned flag is on plzz help me
Click to expand...
Click to collapse
first make sure that you were on latest vibe ui firmware (s105) then came to custom rom, if you've done so then,
create an ims setting in Access Point Names and very few build have working volte... if you weren't on latest firmware, then i'll get you the link for latest firmware along with working, safe and easy guide to flash latest firmware

TWRP Problem
The twrp 3.1.0 by shreps(https://forum.xda-developers.com/android/development/recovery-twrp-3-0-2-0-lenovo-vibe-k5-t3391100) for my Lenovo Vibe K5 Plus(A6020a46 3GB model) doesnt work properly.... I installed the iamge via adb, but when the recovery boots up...it shows a black screen..plz tell me how to install that twrp:crying:

Helloworld1111 said:
The twrp 3.1.0 by shreps(https://forum.xda-developers.com/android/development/recovery-twrp-3-0-2-0-lenovo-vibe-k5-t3391100) for my Lenovo Vibe K5 Plus(A6020a46 3GB model) doesnt work properly.... I installed the iamge via adb, but when the recovery boots up...it shows a black screen..plz tell me how to install that twrp:crying:
Click to expand...
Click to collapse
I've the same model, working fine with me, so let me tell you what I'd done..
downloaded the recovery from moto.shreps.fr by choosing my device and the last 3.1.0 build and renamed it to twrp.img
try the same and first, boot this twrp temporarily using
fastboot boot twrp.img
if twrp works then return to fast boot and flash using
fastboot flash recovery twrp.img
done. ?

Volte is not working in in any rom except AICP
shyampandey said:
first make sure that you were on latest vibe ui firmware (s105) then came to custom rom, if you've done so then,
create an ims setting in Access Point Names and very few build have working volte... if you weren't on latest firmware, then i'll get you the link for latest firmware along with working, safe and easy guide to flash latest firmware
Click to expand...
Click to collapse
Yes I Already did that as i have told you its working in AICP but not in any other rom and one more thing in AICP everything is working good except what'sapp it showing me an error 'unable to backup messages' i am not able to take backup of what'sapp

Ashutoshpatel444 said:
Yes I Already did that as i have told you its working in AICP but not in any other rom and one more thing in AICP everything is working good except what'sapp it showing me an error 'unable to backup messages' i am not able to take backup of what'sapp
Click to expand...
Click to collapse
is that problem persisting during backup or restoration?
if you're having problem in restoration then
Decide which backup file you want to restore.
3. Rename that file from "msgstore-YYYY-MM-DD.1.db.crypt" to "msgstore.db.crypt"
4. Install WhatsApp
5. When asked to restore, tap [Restore]

shyampandey said:
is that problem persisting during backup or restoration?
if you're having problem in restoration then
Decide which backup file you want to restore.
3. Rename that file from "msgstore-YYYY-MM-DD.1.db.crypt" to "msgstore.db.crypt"
4. Install WhatsApp
5. When asked to restore, tap [Restore]
Click to expand...
Click to collapse
No its during backup

Ashutoshpatel444 said:
No its during backup
Click to expand...
Click to collapse
then only one option, use titanium backup and backup your whatsapp app with data

shyampandey said:
I've the same model, working fine with me, so let me tell you what I'd done..
downloaded the recovery from moto.shreps.fr by choosing my device and the last 3.1.0 build and renamed it to twrp.img
try the same and first, boot this twrp temporarily using
fastboot boot twrp.img
if twrp works then return to fast boot and flash using
fastboot flash recovery twrp.img
done.
Click to expand...
Click to collapse
I did temporarily boot the img but a black screen shows up even after following your method.... Is it because of some memory partition type or something??

Helloworld1111 said:
I did temporarily boot the img but a black screen shows up even after following your method.... Is it because of some memory partition type or something??
Click to expand...
Click to collapse
try different version of twrp

shyampandey said:
try different version of twrp
Click to expand...
Click to collapse
if problem persists then flash or boot stock recovery and wipe dalvik cache and cache partition

I am currently using RR nougat the thing is there is no volte. But the option enhanced 4g LTE mode is there and is on. I tried to upgrade to latest frimware from sherep via twrp . I restored it and booted it but the thing is it only shows the home screen for a few second and continues booting this process is continuing . So how can I get pass this my friend ?

shyampandey said:
if problem persists then flash or boot stock recovery and wipe dalvik cache and cache partition
Click to expand...
Click to collapse
If you can, then will you upload the twrp 3.1.0 that you have because it may happen that mine might be corrupted

Helloworld1111 said:
If you can, then will you upload the twrp 3.1.0 that you have because it may happen that mine might be corrupted
Click to expand...
Click to collapse
okehh sure..!!
https://drive.google.com/file/d/0B-RAyHTbpn4WUDZZZGhiVFNxUG8/view?usp=drivesdk

shyampandey said:
okehh sure..!!
https://drive.google.com/file/d/0B-RAyHTbpn4WUDZZZGhiVFNxUG8/view?usp=drivesdk
Click to expand...
Click to collapse
I did flash stock rom, wiped cache and dalvik and itried the twrp which you uploaded but stll only a black sscreen comes up

Helloworld1111 said:
I did flash stock rom, wiped cache and dalvik and itried the twrp which you uploaded but stll only a black sscreen comes up
Click to expand...
Click to collapse
seems like the problem is with your phone, did you try older versions too?

shyampandey said:
seems like the problem is with your phone, did you try older versions too?
Click to expand...
Click to collapse
yup only 3.0.2 r1 and 30.02 r2 by shreps are working....btw is your data partition ext4 or f2fs????

Helloworld1111 said:
yup only 3.0.2 r1 and 30.02 r2 by shreps are working....btw is your data partition ext4 or f2fs????
Click to expand...
Click to collapse
ext4

shyampandey said:
ext4
Click to expand...
Click to collapse
Can you tell me how much time it took to boot into twrp

Problem with flashing ROMs (only official developer ROM working)

Hey guys,
I got a problem and I am not sure what I’m doing wrong. I wanted to install a custom ROM to my Xiaomi Mi 6 but it doesn’t work. I’ve done similar steps to my Redmi 4X and there it worked just fine. A little help would be really appreciated.
Here is what I did. I updated my new device to the latest stable version with the updater app. I then had to install the official developer ROM (from MIUI) because of a bug (not able to register for unlock). I requested the unlock officially and after the waiting time unlocked the device with the MIUI unlock flash tool. In the developer options the device was shown as unlocked and also the bootloader was unlocked.
I installed TWRP 3.2.1-1 from the official website. After booting into TWRP I installed the latest mi-globe ROM (v9.5.3.0 oreo!). After a reboot I could see the logo of the mi-globe ROM but nothing would happen.
I did one mistake. The first time I installed the mi-globe ROM I forgot to wipe Dalvik, Cache, Data and System partition (clean install). So, after I recognized my mistake I rebooted into TWRP made the wipe and installed again but with no success.
After that I tried to install the next lower version of mi-globe (v9.2.4.0 with Android 7.1.1) but this got also stuck at the boot animation. The animation still moves but nothing happens. I waited for about 10 minutes.
5 minutes ago I flashed the official developer ROM with TWRP and it worked. The phone is booting. I was not able to flash the official stable ROM only the developer version works?!?!
Any idea what I did wrong? I flashed custom ROMs a couple of times but never got a problem like this.
Thank you!

Problem solved!
I got it working now. Problem was that wiping data is not enough. I read it in another post. So, if someone has the same problem here is how I solved it:
1. Boot into TWRP
2. FORMAT data (not wipe) - go to wipe, click button in right corner to format data
3. Type in “yes” (all data will be erased!!)
4. Reboot into recovery (TWRP)
5. Go to wipe and wipe Dalvik, Cache, and System
6. Reboot into recovery (TWRP)
7. Go to install and install zip of ROM you would like to install
8. Reboot system - worked!!
:good::good:
The rebooting into recovery is just for safety. I read that if system is wiped the partition could not be available for installation if you don't reboot. So, I guess its better to reboot just be sure.

I have one question or help if I can. I have Mi6 with a global stable rom 9.5.3.0 version. I want to go to the global developer rom. 8.4.12 how to do it if there is a way to not open the bootloader.

zolika1 said:
I have one question or help if I can. I have Mi6 with a global stable rom 9.5.3.0 version. I want to go to the global developer rom. 8.4.12 how to do it if there is a way to not open the bootloader.
Click to expand...
Click to collapse
just download the developer rom an place it in phone memory. goto settings>about>system update. press the 3 dot button and choose update package . Developer rom will be installed without unlocking bootloader.

saadtariq73 said:
just download the developer rom an place it in phone memory. goto settings>about>system update. press the 3 dot button and choose update package . Developer rom will be installed without unlocking bootloader.
Click to expand...
Click to collapse
thank you very much for the instructions, to erase everything from the phone or not?

zolika1 said:
thank you very much for the instructions, to erase everything from the phone or not?
Click to expand...
Click to collapse
It probably will yes. I seem to remember it happening even with locked bootloader

[QUESTION] changing back to miui

Im using a custom rom installed via twrp,
I wanna go back to miui, will it be fine if clean flashed over the current custom ROM through twrp, or do i need to follow any other way?

Try use ROM xiaomi.eu
---------- Post added at 01:00 AM ---------- Previous post was at 01:00 AM ----------
Or mi-globe.com

jaspad1710 said:
Im using a custom rom installed via twrp,
I wanna go back to miui, will it be fine if clean flashed over the current custom ROM through twrp, or do i need to follow any other way?
Click to expand...
Click to collapse
Its easy..
Clean flash ur MIUI rom... (Using TWRP)
And use lazyflasher to skip dm-verity check..
Here : https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view?usp=sharing
Done .... Reboot and Enjoy !!

QwertySDuos2 said:
Its easy..
Clean flash ur MIUI rom... (Using TWRP)
And use lazyflasher to skip dm-verity check..
Here : https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view?usp=sharing
Done .... Reboot and Enjoy !!
Click to expand...
Click to collapse
Wait, i installed miui9 correct version from miui website, i properly did a clean flash (installed correct openg) which im 100% sure, but the phone was stuck at boot logo, but twrp was working with the hardware key combo..pls help
And a peculiar thing is i have been using openg full arm64
Since i first begun using los unofficial, but today after flashing miui its showing that mine is arm and not arm64..pls give ur valuable insights

jaspad1710 said:
Wait, i installed miui9 correct version from miui website, i properly did a clean flash (installed correct openg) which im 100% sure, but the phone was stuck at boot logo, but twrp was working with the hardware key combo..pls help
And a peculiar thing is i have been using openg full arm64
Since i first begun using los unofficial, but today after flashing miui its showing that mine is arm and not arm64..pls give ur valuable insights
Click to expand...
Click to collapse
Format data and cache partitions as ext4 not as f2fs..
Then follow my instructions as before..
Miui has inbuilt gapps..
Why u need opengapps then ??
(Dont flash gapps on miui..)

QwertySDuos2 said:
Format data and cache partitions as ext4 not as f2fs..
Then follow my instructions as before..
Miui has inbuilt gapps..
Why u need opengapps then ??
(Dont flash gapps on miui..)
Click to expand...
Click to collapse
Holyy so flashing the gapps crashed it?

jaspad1710 said:
Holyy so flashing the gapps crashed it?
Click to expand...
Click to collapse
Yeah... Probably coz the gapps in miui are in data partition instead of system partiton (atleast that was the case with miui 8 on my other device the Redmi Note 4G)

ROM][10] LineageOS 17.1 for honor 6x

I just find out that this rom https://forum.xda-developers.com/p8...m-lineageos-17-1-huawei-p8-lite-2017-t4064121 could be installed on our device wtih minor changes.After installing all things you will need to install stock recovery and wipe cache and try to do factory reset(i tried to but i got error massage) then you will successfully boot into rom
Contributors
 @DarkJoker360

I can confirm that this works like a charm, here I posted the instructions for those who want to install it!

Hi when I try to wipe data and cache... I have an error because the data is not mounted, I've trying to change the system file to ext2 and ext4 but nothing change. I also tried to repair system file. What can I do ? My device is already emui 8 and it's an Huawei gr5 2017 bll-l22. Thanks for your help ?

Momo745040 said:
Hi when I try to wipe data and cache... I have an error because the data is not mounted, I've trying to change the system file to ext2 and ext4 but nothing change. I also tried to repair system file. What can I do ? My device is already emui 8 and it's an Huawei gr5 2017 bll-l22. Thanks for your help
Click to expand...
Click to collapse
Try the lastest TWRP in this thread
https://forum.xda-developers.com/p8...wrp-3-3-1-0-huawei-p8-lite-2017-t3953122/amp/
After installing system.img, u need to resize the system partition, until see the used space ~17xxmb and free ~18xx mb,
after that flash gapps
and MUST flash Magisk Phh 19.3
the flash the patch file.
After first boot, you need to, format data in erecovery
Everything works smoothly except......can not make and receive calls, ooopss
update, i try to roll back to emui8, and start the process again. it works now.
recommend to update, lets teach the old dog new trick

A big job ahead ?. I will try and I will tell you if it works thank you for your answer. One last question is there a way to keep a custom recovery because sometimes magisk's module causes a botloop (sorry for my bad English ?)

lucsi said:
Try the lastest TWRP in this thread
https://forum.xda-developers.com/p8...wrp-3-3-1-0-huawei-p8-lite-2017-t3953122/amp/
After installing system.img, u need to resize the system partition, until see the used space ~17xxmb and free ~18xx mb,
after that flash gapps
and MUST flash Magisk Phh 19.3
the flash the patch file.
After first boot, you need to, format data in erecovery
Everything works smoothly except......can not make and receive calls, ooopss
update, i try to roll back to emui8, and start the process again. it works now.
recommend to update, lets teach the old dog new trick
Click to expand...
Click to collapse
So I came back (finally) to emui 8 and I tried to install the recovery custom but I still cannot access the internal storage memory.
I think it comes from my model because I have a Huawei GR5 2017 which is supposed to be a 'copy' of the honor 6x but all the roms which require emui 5.x installed do not work.
In any case thank you very much for your help! [emoji106]
Envoyé de mon BLL-L22 en utilisant Tapatalk

Momo745040 said:
So I came back (finally) to emui 8 and I tried to install the recovery custom but I still cannot access the internal storage memory.
I think it comes from my model because I have a Huawei GR5 2017 which is supposed to be a 'copy' of the honor 6x but all the roms which require emui 5.x installed do not work.
In any case thank you very much for your help! [emoji106]
Envoyé de mon BLL-L22 en utilisant Tapatalk
Click to expand...
Click to collapse
The trick is you need 2 twrp.
https://drive.google.com/file/d/1-iErvJefoFri7HKNEU8uSnYo8kmIyVd9/view?usp=sharing
https://drive.google.com/file/d/1MnFBplsp3nZ3b0BiJ764cV67kHXeRzL4/view?usp=sharing
use twrp-3.3.1emui8v2.img for everything
In the last step after everything flashed, you flash the other twrp huaweitwrp.img
reboot into that twrp
chooose advances; fix encryption
reboot system, then you can access internal memory
the same process with android 10.
mine is also Gr5 2017 and now running 10, no bug

lucsi said:
The trick is you need 2 twrp.
https://drive.google.com/file/d/1-iErvJefoFri7HKNEU8uSnYo8kmIyVd9/view?usp=sharing
https://drive.google.com/file/d/1MnFBplsp3nZ3b0BiJ764cV67kHXeRzL4/view?usp=sharing
use twrp-3.3.1emui8v2.img for everything
In the last step after everything flashed, you flash the other twrp huaweitwrp.img
reboot into that twrp
chooose advances; fix encryption
reboot system, then you can access internal memory
the same process with android 10.
mine is also Gr5 2017 and now running 10, no bug
Click to expand...
Click to collapse
Thanks you very much for your help!
I'll try this weekend (I don't have time in week).
I will come back to say if it worked

Has anyone tried these github projects to unlock the bootloader of his Honor (6X) or Huawei Device?
Maybe it is possible to accelerate these programs by using cuda cores on nvidia graphic card(s).
https://github.com/SkyEmie/huawei-ho...ock-bootloader
https://github.com/Martazza/Huawei-Bootloader-Unlocker

lucsi said:
The trick is you need 2 twrp.
https://drive.google.com/file/d/1-iErvJefoFri7HKNEU8uSnYo8kmIyVd9/view?usp=sharing
https://drive.google.com/file/d/1MnFBplsp3nZ3b0BiJ764cV67kHXeRzL4/view?usp=sharing
use twrp-3.3.1emui8v2.img for everything
In the last step after everything flashed, you flash the other twrp huaweitwrp.img
reboot into that twrp
chooose advances; fix encryption
reboot system, then you can access internal memory
the same process with android 10.
mine is also Gr5 2017 and now running 10, no bug
Click to expand...
Click to collapse
I managed to find a compatible recovery but when I flashed everything and I did a factory reset from the erecovery the phone restarts and it displays the logo lineageOs for 5 seconds then it restarts and the screen remains black then it restarts and displays the logo then it restarts in erecovery telling me that the memory has been seriously damaged.
I think I will give up here([emoji28])but anyway thank you for your help [emoji106].
Envoyé de mon BLL-L22 en utilisant Tapatalk

at first it says encryption unsuccessful then i was told to format the date from twrp, now it stuck on boot animation, i have left it overnight and it reboots to bootloader with code BFM_S_NATIVE_DATA_FAIL 211 NA
reboot_panic_and_wdt_process_func
finally i managed to get it work, so now i'm going to post every single thing i did to make this rom works and i will try to be as noob friendly as possible
first thing first in case you mess everything up, i found out this guide to be some sort of remedy for all problems regarding honor 6x, because from here you will install stock emui 5 which you can use to upgrade to stock emui 8 from this guide
use the guide above if you want to go back to stock rom because every single custom rom will require you to flash from the stock rom
next i follow the guide provided here, after flashing the patch go back to stock oreo recovery which is available on the emui 8 folder you downloaded earlier
do factory reset and wipe cache after that load to bootloader again
finally flash huaweitwrp.img provided by lusci on the post #7
boot to system and enjoy

Raxul said:
at first it says encryption unsuccessful then i was told to format the date from twrp, now it stuck on boot animation, i have left it overnight and it reboots to bootloader with code BFM_S_NATIVE_DATA_FAIL 211 NA
reboot_panic_and_wdt_process_func
Click to expand...
Click to collapse
Have you followed all these instructions?
matyrock said:
How can there be such awesome people? It works in my Honor 6X! And it's fully de-googled man this is just perfect! Thank you very much for this...
These are the steps (thanks @DunoCZ) I followed if an Honor 6X user want to install this ROM:
- *Upgrade to EMUI 8!*
- *Remove the saved fingerprints and Google Accounts just in case*
- Flash the TWRP recovery from @Dil3mm4
- Format cache, dalvik cache, data and system: TWRP -> Wipe -> Advanced Wipe
- Flash the ROM via TWRP (you can try with fastboot but it already works with TWRP): TWRP -> Install -> Install Image
- Resize the system partition: TWRP -> Wipe -> Advanced Wipe -> System -> Resize (DO NOT FORMAT!)
- (Optional) Install GApps, Magisk
- (Required) Install patch
- Reboot and wait
Click to expand...
Click to collapse

D0ping said:
Have you followed all these instructions?
Click to expand...
Click to collapse
i did and the diffferent thing i did is to flash back stock recovery as mentioned by op, wipe the cache and then flash huaweitwrp.im provided by lusci
i edited my post above

Yea, i cant get it to work. No matter what i do after
- flashing system.img
- resizing the system partition
- installing opengapps
- installing magisk
- installing the patch
followed by either:
-straight up booting it.
- doing everything i can in every bootloader.
evenm if i freshly format /data the system get stuck in a boot. Have tried all of the recoveries in this thread. All are basically the same, from what i have observed.
Edit: Figured it out. apparently my gapps was somehow broken. Downloaded a fresh arm64-ogapps and all is working now

Darkitz said:
Yea, i cant get it to work. No matter what i do after
- flashing system.img
- resizing the system partition
- installing opengapps
- installing magisk
- installing the patch
followed by either:
-straight up booting it.
- doing everything i can in every bootloader.
evenm if i freshly format /data the system get stuck in a boot. Have tried all of the recoveries in this thread. All are basically the same, from what i have observed.
Click to expand...
Click to collapse
follow my guide here, this is how i managed to get it work, make sure you flash the rom with your CLEAN STOCK rom
Raxul said:
first thing first in case you mess everything up, i found out this guide to be some sort of remedy for all problems regarding honor 6x, because from here you will install stock emui 5 which you can use to upgrade to stock emui 8 from this guide
use the guide above if you want to go back to stock rom because every single custom rom will require you to flash from the stock rom
next i follow the guide provided here, after flashing the patch go back to stock oreo recovery which is available on the emui 8 folder you downloaded earlier
do factory reset and wipe cache after that load to bootloader again
finally flash huaweitwrp.img provided by lusci on the post #7
boot to system and enjoy
Click to expand...
Click to collapse

Raxul said:
at first it says encryption unsuccessful then i was told to format the date from twrp, now it stuck on boot animation, i have left it overnight and it reboots to bootloader with code BFM_S_NATIVE_DATA_FAIL 211 NA
reboot_panic_and_wdt_process_func
finally i managed to get it work, so now i'm going to post every single thing i did to make this rom works and i will try to be as noob friendly as possible
first thing first in case you mess everything up, i found out this guide to be some sort of remedy for all problems regarding honor 6x, because from here you will install stock emui 5 which you can use to upgrade to stock emui 8 from this guide
use the guide above if you want to go back to stock rom because every single custom rom will require you to flash from the stock rom
next i follow the guide provided here, after flashing the patch go back to stock oreo recovery which is available on the emui 8 folder you downloaded earlier
do factory reset and wipe cache after that load to bootloader again
finally flash huaweitwrp.img provided by lusci on the post #7
boot to system and enjoy
Click to expand...
Click to collapse
Ok let me make it simple for you.
1. Flash stock Oreo Rom (no need to boot it)
2. Flash TWRP by Dilemma in fastboot.
3. Go to recovery and wipe data by typing yes to decrypt data partition (if not already decrypted)
4. Go to fastboot and flash system.img
5. Reboot to recovery and resize system partition
6. Flash GApps
7. Flash los patches zip
8. Flash disable Dm verity patch
9. Flash magisk-phh zip in the end.
10. Reboot and wait.
I used these steps to flash different GSIs/ROMs and it works perfectly.

I managed to flash the rom but without flashing the gapps because I don't know exactly which one to flash should I flash gapps for android 10 arm64 or gapps for android 8.0 ??
try both and it gives me error 20

victorgrey999 said:
I managed to flash the rom but without flashing the gapps because I don't know exactly which one to flash should I flash gapps for android 10 arm64 or gapps for android 8.0 ??
try both and it gives me error 20
Click to expand...
Click to collapse
You need to resize the partition
flash android10 arm 64

lucsi said:
You need to resize the partition
flash android10 arm 64
Click to expand...
Click to collapse
I managed to flash the rom successfully, but I don't know if this only happens to me, I feel it is slow and the cell phone is heating up more than normal. ?

victorgrey999 said:
I managed to flash the rom successfully, but I don't know if this only happens to me, I feel it is slow and the cell phone is heating up more than normal. ?
Click to expand...
Click to collapse
Mine is ok. battery backup is ok.
Antutu ~96K point
You can install kernel management app to tweak the CPU freq