[Q] Status 7 trying to install new ROM CM11 (KitKat) - HTC One X

Hello all,
Please can someone help me??
I have a HTC One X, I have unlocked my phone on HTCDev, it is showing as rooted (not broken lol) and i can add superuser on there.
I have CWM installed v.5.8.4.0 however, when looking in the ROM Manager, trying to update it is shows me 6.0.4.7 under recovery setup. but when i boot into recovery it still shows me 5.8.4.0??
I have been trying to install the Beanstalk-4.4.240-20140206-endeavouru.zip...
I keep getting stuck in the installation with the message status 7 and then installation stops..
I have cleared all the files and cache that is required prior and still fails. I have tried removing the assert / getpro lines and I still get status 7 during installation.
I have tried a few different ROMs all telling me they are for HTC One X (so i am guessing these just are the right ROMs)
The only think i can see i have is that i have S-On, but i cannot seem to find anywhere to turn this off.. Is this the only reason it is not working????
I have tried another recovery images as well and still no luck?? (unless i did that wrong)
Please can someone help me, I would really like to put a Kitkat ROM on my phone as HTC are not going to get this done..

Ditch rommanager, it does not work on a s-on hox. Second you need to flash a kitkat recovery to install kitkat roms and a sense recovery to install sense 5 roms or earlier build aosp roms.
So for kitkat download the latest philz touch recovery available, and if you want sense based roms i suggest to use philz touch 5.15......
You have to flash boot.img & recoverys via fastboot (pc) to the phone !

Mr Hofs said:
Ditch rommanager, it does not work on a s-on hox. Second you need to flash a kitkat recovery to install kitkat roms and a sense recovery to install sense 5 roms or earlier build aosp roms.
So for kitkat download the latest philz touch recovery available, and if you want sense based roms i suggest to use philz touch 5.15......
You have to flash boot.img & recoverys via fastboot (pc) to the phone !
Click to expand...
Click to collapse
Thank you , do you by any chance know where i can get these files? sorry for asking, been at this all day and not getting anywhere :crying:

I think this thread explains it pretty well
http://forum.xda-developers.com/showthread.php?t=1605720

Mr Hofs said:
I think this thread explains it pretty well
http://forum.xda-developers.com/showthread.php?t=1605720
Click to expand...
Click to collapse
Thank you i have checked this out.. but i can only find the Philz touch 6.19.3 clockworkmod 6.0.4 so i have updated
Just a slight issue now where i am cleaning all what has to be cleared and then installing the ROM and GAPP which both are now installing by the look of it and no errors.. but i am looping back into Philz touch rather than the phone restarting.. Even if i restore the previous version it still comes back to Philz touch..
do you know why this is happening? I tried CM11 Rom and also the Beanstalk 4.4 ROM (As well as restore) all coming back to recovery mode.. Im lost now

Try this recovery and flash a sense 5 rom to check if that works. It should not boot back.to the recovery.
https://www.dropbox.com/s/yqzlpqo8illa53j/Philz recovery 5.15.9.img
And can you post the outcome of :
Fastboot getvar all
And delete the imei and serial number before posting it !!

ok the 5.15 installed fine, but the images here are giving me status 7 and restore is not working for me from here either
i have attached the getvar all outcome

The specs are fine, download a sense 5 rom like viper X or arhd. And install it like this :
Flash the boot.img of the rom !
Then enter the recovery and make a FULL wipe :
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format cache , data and system
Then install the rom (if you go for viper you select cache wipe only and full rom install in the aroma)

ok I realised i didn't do the boot.img correctly.. i tried it again now but went back to Touch 6 and the Beanstalk has installed YAY!! :laugh:
You said "download a sense 5 rom like viper X or arhd" are these better than Beanstalk? I am asking as this is my first 4.4 ROM i have installed...?
I do have to say i do like the sense 5 so wondering if it is worth changing ROM to what you are suggesting?
Otherwise it is now working... Thank you heaps for all your help

Ah no there is no "better" rom. I suggested these because i have experience with these roms. Just for testing purposes.
But all is fine. And you know how to flash so all good.
CASE CLOSED !

Related

im lost.. dont know what to do anymore.

sup guys!
I would like to have the JB update from ARHD 16 but im totally lost in the proces of how to do it.
i succesfully unlocked the bootloader
Installed Custom recovery and did a nandroid backup
also my phone is rooted
-Downloaded the custom rom
-Downloaded the flash boot IMG
soo what is the exact thing i need to do know? i know i need to update Hboot.. but when and how. also i want a custom kernel for max battery life.. IM CONFUSED!?!
with my motorola defy it was so easy..
First you need to update your HBOOT.
Easiest way is using >> THIS tools thanks to Stuart001.
After you succesfully done that you can flash the rom, a rom flash instruction is described in rom thread where you download the rom.zip.
Normal steps go like this:
upload downloaded rom.zip to storage on your device
flash boot.img
clear cache
install rom.zip using recovery option
Aroma installer (in rom.zip) has an option to wipe your device, I suggest you do that during rom install as well.
Of course this will erase all data, I'm just trying to help and don't take any responsibility.
if you have a supporting cid. Then only you can install jb sense roms.
ah nevermind. already found out how by chrashing my phone haha. i already solved it and now running custom rom!

HTC One X brick? Help me

Today i tried to install this crappy Custom Rom http://forum.xda-developers.com/showthread.php?t=1705334&highlight=bootloop Renovate 1.1 i installed 2 other Roms before and all of those was succesfully , then i tested this and i got into a bootloop , so i restored my backup , this bootloops too and the 2 other roms bootloop too , i tried so much things now i can go to bootloader but its Relocked Security Warning what can i do?
go0dlife said:
Today i tried to install this crappy Custom Rom http://forum.xda-developers.com/showthread.php?t=1705334&highlight=bootloop Renovate 1.1 i installed 2 other Roms before and all of those was succesfully , then i tested this and i got into a bootloop , so i restored my backup , this bootloops too and the 2 other roms bootloop too , i tried so much things now i can go to bootloader but its Relocked Security Warning what can i do?
Click to expand...
Click to collapse
Unlock the bootloader, go to adb/fastboot folder and store your ROM's boot.img there. Shift + Right Click within that folder and Open command window (be in fastboot mode on your phone in the meantime) :
fastboot flash boot boot.img
fastboot erase cache
Go to recovery, wipe all except SD (you can if you don't need your files) and flash a fresh ROM. Also, lock the bootloader and never ever flash any custom ROM again if you're going to call it crap whenever you fail.
edit: it isn't that easy to brick the device, and finally, your topic doesn't belong in this subforum.
how to update hboot version? i need 1.31
ok i unlocked now i have hboot 1.12.0000
but i cant install the rom i followed your instruction and get bootloop..
go0dlife said:
Today i tried to install this crappy Custom Rom http://forum.xda-developers.com/showthread.php?t=1705334&highlight=bootloop Renovate 1.1 i installed 2 other Roms before and all of those was succesfully , then i tested this and i got into a bootloop , so i restored my backup , this bootloops too and the 2 other roms bootloop too , i tried so much things now i can go to bootloader but its Relocked Security Warning what can i do?
Click to expand...
Click to collapse
The rom is crap because it didn't work or because you don't have a clue what your doing? It's not nice to say the roms crap when so many people have used without problem and without a doubt the problem will be down to you. People put a lot of time and effort into roms for free so try to be more respectful.
Sent from my Nexus 7 using Tapatalk 2
Agree
As previously said - These guys are all doing soooo much work for us (the community) and it's NOT paid - anyone who makes a ROM, ANYONE - needs to be applauded even for trying, but I'm sure that most ROM chefs test their roms to a point before releasing them and that you've probably missed a step or flashed incompatible zips or something...
Did you extract the boot.img from the roms zip file and "fastboot flash boot boot.img" it? It sounds like you might have been playing with ROMS which all worked on the same kernel and now you've flashed one which uses a different one, resulting in a bootloop like you say - I'm a noob and have done this a few times. Boot into bootloader, fastboot flash your boot.img, then boot into recovery and flash the rom (factory reset / wipe all data / cache / dalvik) and you might be lucky enough to boot into the rom!
These steps MAY not fix your problem if it is something else - but from my experience they are not steps which will brick your device, if you don't think you've flashed the boot.img - then I'd start there.
With our HOX's you ALWAYS need to remember (ALWAYS ALWAYS ALWAYS) to flash (in fastboot mode) your boot.img (which is 99% of the time, included inside the roms ZIP file...
Hope I've helped!
(Hit thanks if I did! )
Before saying those "crappy" words to the rom. Read alot first. All the answers are in the forum. Rom chefs dedicate time to cook a good rom.
Sent from my HTC One X using xda app-developers app
Guys......its not the rom, its not the boot.img.........surprise ! Its his hboot (1.12)
Get that updated otherwise it will never run.
And please loose the attitude towards roms that don't boot. They all boot but check the requirements first
Its your phone/hboot that does not support it
AW: HTC One X brick? Help me
http://m.youtube.com/#/watch?v=wwleOote5M0&desktop_uri=/watch?v=wwleOote5M0&gl=DE

[Q] Anyone else have trouble flashing a ROM

I am on 4.1.2
Ive used all 3 available custom recoveries, 4 if you include the other TWRP
Every recovery with every zip, all md5 checked, say unable to open zip
Am I doing something wrong?
shaunjohn said:
I am on 4.1.2
Ive used all 3 available custom recoveries, 4 if you include the other TWRP
Every recovery with every zip, all md5 checked, say unable to open zip
Am I doing something wrong?
Click to expand...
Click to collapse
What are you trying to flash?
And which recovery VERSION are you using?
Model aand name of rom
Which model do you have?? and what is the rom's name?
210r
ive tried
philz recpvery
cwm
twrp 2/7 and 2/8
ive tried
cm11
rocket
swat(name may be wrong)
kids
Reflash the 4.4.2 firmare from odin all over again and install TWRP (2.8.0.0) the flash rom in recovery
A friendly reminder - please keep all question threads in the Q&A board. Android dev is only for posting releases, not questions.
Thanks!
Same Result
ruzell said:
Reflash the 4.4.2 firmare from odin all over again and install TWRP (2.8.0.0) the flash rom in recovery
Click to expand...
Click to collapse
same result, error opening zip file
Did you ever figure this out? I"m having the same issue.
Can't flash a ROM on Tab 3 7.0 t210r
I am rooted, first thing I did after purchase.
Am currently running 4.1.2, build jzo54k.t210rueamk1
I have flashed PhilZ Touch 6, 6.44.9, ClockworkMod 6.0.4.9 from here:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
I have tried to flash the following ROMs:
Stockrom Series Ultimate Edition
http://forum.xda-developers.com/showthread.php?t=2489395
RocketTab v3.1
http://forum.xda-developers.com/showthread.php?t=2507772
Flash fails with:
Installation aborted (bad), can't open <path to zip file><name of zip>
This happens after a factory reset, wipe data, cache.
I have a Samsung S3 that I have rooted, and then flashed many times. Before that I had an HTC EVO. I am not new to the process, but apparently I am missing something here.
Got any suggestions?
Which Odin Version you are used to install The Recovery? Try an other Version.
Is your Rom on The micro Sdcard ? If you use Philz so is The max capacity 32 GB, if you use TWRP so is max 64 GB supported.
starmaha said:
I am rooted, first thing I did after purchase.
Am currently running 4.1.2, build jzo54k.t210rueamk1
I have flashed PhilZ Touch 6, 6.44.9, ClockworkMod 6.0.4.9 from here:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
I have tried to flash the following ROMs:
Stockrom Series Ultimate Edition
http://forum.xda-developers.com/showthread.php?t=2489395
RocketTab v3.1
http://forum.xda-developers.com/showthread.php?t=2507772
Flash fails with:
Installation aborted (bad), can't open <path to zip file><name of zip>
This happens after a factory reset, wipe data, cache.
I have a Samsung S3 that I have rooted, and then flashed many times. Before that I had an HTC EVO. I am not new to the process, but apparently I am missing something here.
Got any suggestions?
Click to expand...
Click to collapse
bierma32 said:
Which Odin Version you are used to install The Recovery? Try an other Version.
Is your Rom on The micro Sdcard ? If you use Philz so is The max capacity 32 GB, if you use TWRP so is max 64 GB supported.
Click to expand...
Click to collapse
I didn't use Odin to flash the recovery. Downloaded the zip and flashed via recovery.
I have tried with the ROM on the external and internal SD. Same results.
32GB SD.
starmaha said:
I didn't use Odin to flash the recovery. Downloaded the zip and flashed via recovery.
I have tried with the ROM on the external and internal SD. Same results.
32GB SD.
Click to expand...
Click to collapse
u
How do you rooted your Tab?
With Stockrecovery you can not flash a Rom or Recovery.
Flash Philz or TWRP With Odin, reboot to The New flashen Recovery , than you can install a Rom.
All information for The right steps you will find at dev Sektion.
bierma32 said:
u
How do you rooted your Tab?
With Stockrecovery you can not flash a Rom or Recovery.
Flash Philz or TWRP With Odin, reboot to The New flashen Recovery , than you can install a Rom.
All information for The right steps you will find at dev Sektion.
Click to expand...
Click to collapse
To clarify, when I initially rooted, I used Odin to flash recovery and root.
starmaha said:
To clarify, when I initially rooted, I used Odin to flash recovery and root.
Click to expand...
Click to collapse
At first we are turn us i The circle,but now we can come to your prob.
Flash a Rom and make a picture and post that here. So we can See The error message and your Recovery.
starmaha said:
To clarify, when I initially rooted, I used Odin to flash recovery and root.
Click to expand...
Click to collapse
Sounds like the rom download is bad. Check the md5 of the rom before trying to install.
Kind of success. I downloaded the same version of PhilZ, for Odin, on my laptop.
I put the tablet in download mode and flashed the recovery with Odin.
I downloaded the ROM again (http://forum.xda-developers.com/gal...m-stockrom-kitkat-version-16-08-2014-t2849742). This is one I had tried before. This time to my laptop and copied it to the tablet. The other times, I had downloaded the ROM directly onto the tablet.
While it was in the process of flashing, there were some video anomolies.
I rebooted the tablet into recovery and flashed the ROM. It hung on SAMSUNG for a very long time after the flash and reboot. I powered it off and rebooted. It booted completely this time, but not without some issues. The first thing was when the message pops up that Android is optimizing apps. That bar was all screwy looking, snowy. (see attached image)
Once I got to the lock screen and entered the pin, the screen "fractured", pieces shifted around, and the tablet locked up. I wish I had taken a picture of it. Never seen anything like it.
I had not done a data wipe yet. I did a data wipe, rebooted, entered the pin, tablet locked up again.
I then was going to restore the backup I made before the flashing. It wouldn't restore because of an MD5 mismatch. I had restored this backup previously with no problem.
I restored an older backup and then spent a couple of hours getting everything back to the level of the now broken backup.
Flash nolekat and all went fine.
I've had problems as well. I normally flash via a recovery. At times I'll have an md5 mismatch or it just doesn't work; I've even backed up a working ROM only to find out I can't restore the same backup. Seems like a hit or miss with me
I tried flashing NoleKat and it failed on me too.
[/COLOR]
bierma32 said:
At one of your post you write after flashing you must put in the Pin?
So you have make not a clean install or factory reset, you done a wipe cache and wipe dalvik.
You must do a clean install if you come from different Roms or Version.
Click to expand...
Click to collapse
Please post a picture from your Recovery with the error message.

[q] please help -- bricked --

well, I was installing a aosp jelly bean rom and I installed the boot.img first and then flashed the rom, but the rom said that the install was aborted due to bootloader issues or something. I then tried to restore my nandroid backupand that put me stuck on the htc screen on bootup. I then tried to install stock recovery as a guide told me or something and it got rid of my backup. I have no idea what to do. I have reflashed CWM and can boot into the bootloader and the recovery. How can I install a new rom or a stock rom to make this work. Please help!
My main number is this : 4.18.401.4
my hboot version is 1.72.0000
my radio version is 5.1204.167.31
gman88667733 said:
well, I was installing a aosp jelly bean rom and I installed the boot.img first and then flashed the rom, but the rom said that the install was aborted due to bootloader issues or something. I then tried to restore my nandroid backupand that put me stuck on the htc screen on bootup. I then tried to install stock recovery as a guide told me or something and it got rid of my backup. I have no idea what to do. I have reflashed CWM and can boot into the bootloader and the recovery. How can I install a new rom or a stock rom to make this work. Please help!
My main number is this : 4.18.401.4
my hboot version is 1.72.0000
my radio version is 5.1204.167.31
Click to expand...
Click to collapse
are you flashed the boot.img from the backup?
Thant said:
are you flashed the boot.img from the backup?
Click to expand...
Click to collapse
It deleted my backup so I couldn't get it... not sure what to do...
my situation is that my backup is gone and I am stuck at the htc quietly brilliant logo
gman88667733 said:
It deleted my backup so I couldn't get it... not sure what to do...
my situation is that my backup is gone and I am stuck at the htc quietly brilliant logo
Click to expand...
Click to collapse
ok wich hboot and wich recovery you flashed first time, now you are with the stock one.
1. Unlock bootloader and flash THIS recovery
take the recovery.img from zip paste it in your fastboot folder and flash it with the command fastboot flash recovery recovery.img then go in recovery and charge the phone
2. Do you have some rom on your sd card?
3. Wich CWM version?
Edit if your AICP rom is still on sd card flash THIS RECOVERY then install the rom and flash the boot.img.
I think you tryed with the old recovery to install KitKat or LP rom big mistake
Thant said:
ok wich hboot and wich recovery you flashed first time, now you are with the stock one.
1. Unlock bootloader and flash THIS recovery
take the recovery.img from zip paste it in your fastboot folder and flash it with the command fastboot flash recovery recovery.img then go in recovery and charge the phone
2. Do you have some rom on your sd card?
Click to expand...
Click to collapse
okay, so this will sound odd but I rfandomly flashed philz touch recovery and my phone turned on and is now working.... I think I need the proper help to install a custom rom now, instead of messing up... could you maybe get me the files for a JB AOSP rom? I would appreciate it! not sure what to look for now after this, scared i'll mess up. Thanks!
gman88667733 said:
okay, so this will sound odd but I rfandomly flashed philz touch recovery and my phone turned on and is now working.... I think I need the proper help to install a custom rom now, instead of messing up... could you maybe get me the files for a JB AOSP rom? I would appreciate it! not sure what to look for now after this, scared i'll mess up. Thanks!
Click to expand...
Click to collapse
Why you not install some sense for first time or try to flash some CM12 or lolipop. Remember Philz 5.15.9 is only for JB roms and mount sd card work only on 5.15.9. If you want KitKat or Lolipop you must to change the recovery to this where I give you in my post, but dont forget to copy the rom to sd card with this recovery first., or easy way download some sense and flash it
Say wich rom you want to flash and I will give you the right link for rom
Thant said:
Why you not install some sense for first time or try to flash some CM12 or lolipop. Remember Philz 5.15.9 is only for JB roms and mount sd card work only on 5.15.9. If you want KitKat or Lolipop you must to change the recovery to this where I give you in my post, but dont forget to copy the rom to sd card with this recovery first., or easy way download some sense and flash it
Say wich rom you want to flash and I will give you the right link for rom
Click to expand...
Click to collapse
You are very kind when flashing a rom, do I remove the boot.img from the rom file to flash via fastboot, or do i just make a copy of it? I would like to flash cm 10.2 to begin with, which files do i need and which recovery? thank you in advance, you are a great help!
Also, my phone only came with 1.5gb free space for apps... It is a 32gb phone and i have 25gb of storage left but it says only 1.5gb out of 6gb for apps, how do i unlimit this?
gman88667733 said:
You are very kind when flashing a rom, do I remove the boot.img from the rom file to flash via fastboot, or do i just make a copy of it? I would like to flash cm 10.2 to begin with, which files do i need and which recovery? thank you in advance, you are a great help!
Also, my phone only came with 1.5gb free space for apps... It is a 32gb phone and i have 25gb of storage left but it says only 1.5gb out of 6gb for apps, how do i unlimit this?
Click to expand...
Click to collapse
10.2 is too old but it is your decision. just extract the boot.img from zip and put it in your fastboot folder. Don't extract the hole zip, and copy the original zip on your sd card. You can move the apps to your sd card CM support it
Well I want an aosp rom that means i can stick to the same recovery. It seems easier to stick to JB, would that be okay? Could you find me the relevant files?
I basically want the easiest one to install and the most risk free!
Sent from my HTC One X using XDA Free mobile app

[SOLVED] Help! HTC ONE X without OS, can't install! (MultiRom problem)

I have HTC One X and I tried install unofficial MultiRom and when I installed it, it removed my OS . At first I couldn't put rom to internal storage, because One X don't have sd-card slot. I tried adb push and adb sideload, but finally only using USB-stick to move is possible.
Well, then I moved some roms to internal storage with PhilZ Recovery's Aroma filemanager :good: , but when I tried install roms, some of them it gives only Status 7. That's not biggest problem because when recovery installs rom, it seems to install half of rom and then it says that rom is installed. And when I try it, it doesn't works.
Please, help me. I don't know what to do. I have tried so many roms that should work on my phone, but no. I have tried e.g. stock roms, cyanogenmod 11, MaximusHD (problem in this link: http://forum.xda-developers.com//ht...21-3-0-jb-4-2-2-sense-5-t2919506/post58928638 ) etc.
(I'm sorry about my language, I'm Finnish )
TheJullus said:
I have HTC One X and I tried install unofficial MultiRom and when I installed it, it removed my OS . At first I couldn't put rom to internal storage, because One X don't have sd-card slot. I tried adb push and adb sideload, but finally only using USB-stick to move is possible.
Well, then I moved some roms to internal storage with PhilZ Recovery's Aroma filemanager :good: , but when I tried install roms, some of them it gives only Status 7. That's not biggest problem because when recovery installs rom, it seems to install half of rom and then it says that rom is installed. And when I try it, it doesn't works.
Please, help me. I don't know what to do. I have tried so many roms that should work on my phone, but no. I have tried e.g. stock roms, cyanogenmod 11, MaximusHD (problem in this link: http://forum.xda-developers.com//ht...21-3-0-jb-4-2-2-sense-5-t2919506/post58928638 ) etc.
(I'm sorry about my language, I'm Finnish )
Click to expand...
Click to collapse
What rom you want to install wich version on multiRom you flash for the new layout or for the old what rom you have before start with multirom
Thant said:
What rom you want to install wich version on multiRom you flash for the new layout or for the old what rom you have before start with multirom
Click to expand...
Click to collapse
I want to install MaximusHD http://forum.xda-developers.com/showthread.php?t=2410320 . I don't have now MultiRom, because I managed to remove it. I don't know is that a good idea. I had before Sense 5.0 with android 4.2.2 updat of HTC.
TheJullus said:
I want to install MaximusHD http://forum.xda-developers.com/showthread.php?t=2410320 . I don't have now MultiRom, because I managed to remove it. I don't know is that a good idea. I had before Sense 5.0 with android 4.4.2 updat of HTC.
Click to expand...
Click to collapse
The latest sense for HOX is 4.2.2 4.4 KitKat never been released. Flash Philz recovery 5.15.9 then mount sd card then copy your rom to a sd card then flash it then flash the boot.img and you will have working phone. And MultiRom v31 is for the new layout and not work with sense based rom first read the OP before install something on your phone it will be good
Thant said:
The latest sense for HOX is 4.2.2 4.4 KitKat never been released. Flash Philz recovery 5.15.9 then mount sd card then copy your rom to a sd card then flash it then flash the boot.img and you will have working phone. And MultiRom v31 is for the new layout and not work with sense based rom first read the OP before install something on your phone it will be good
Click to expand...
Click to collapse
My bad! It's android 4.2.2 . I'll try that what you tell me. And multirom is unofficial version (http://forum.xda-developers.com/showthread.php?t=2761149)
I can't download
I can't dowload Philz 5.15.9, Norton and Anti-Malware tell that file is malware!?
And i have version 6.19.3 already.
Problem
Thant said:
The latest sense for HOX is 4.2.2 4.4 KitKat never been released. Flash Philz recovery 5.15.9 then mount sd card then copy your rom to a sd card then flash it then flash the boot.img and you will have working phone. And MultiRom v31 is for the new layout and not work with sense based rom first read the OP before install something on your phone it will be good
Click to expand...
Click to collapse
Biggest problem is that recovery doesn't install rom fully. Then it says that it's installed, but it's not installed successfully because It installs boot, but not OS. I tried to install cyanogenmod 11, but same problem. When I try to install MaximusHD which includes installing program, it say to me:
-Checking Model ID
assert failed: getprop("ro.product.device")=="endeavoru"
II getprop("ro.build.product")=="endeavoru" II
getprop("ro.product.board")=="endeavoru"
TheJullus said:
Biggest problem is that recovery doesn't install rom fully. Then it says that it's installed, but it's not installed successfully because It installs boot, but not OS. I tried to install cyanogenmod 11, but same problem. When I try to install MaximusHD which includes installing program, it say to me:
-Checking Model ID
assert failed: getprop("ro.product.device")=="endeavoru"
II getprop("ro.build.product")=="endeavoru" II
getprop("ro.product.board")=="endeavoru"
Click to expand...
Click to collapse
Are you using Philz5.15.9 for maximus don't use newer and for CM11 you need latest twrp 2.8.0.1 because CM11 is a KitKat rom
---------- Post added at 09:57 PM ---------- Previous post was at 09:56 PM ----------
TheJullus said:
I can't dowload Philz 5.15.9, Norton and Anti-Malware tell that file is malware!?
And i have version 6.19.3 already.
Click to expand...
Click to collapse
Download it from my google drive HERE
SOLVED!
I reinstalled MultiRom and tried to install rom with its TWRP Recovery and it installed rom. . I'll also thank Thant for support :good: (I give thank to you)

Categories

Resources