Help maybe broke my p6! - Huawei Ascend P6, Mate

Okay so i had my p6 for around 3 months now, and i have rooted it flash quite a lot roms. But 2 weeks ago i flash b506, and it was OK, didn't like the rom, but kinda just, used it. Then today i wanted to install omni rom, i used stock recovery, and now it's stuck on 'huawei ascend' logo. And i can't update to any softare using the power + vol up + vol down. It just comes up with a fail, i can't flash any custom roms. Im pretty, screwed. Please help!

Why open new topic?.......

kabirjedi said:
Why open new topic?.......
Click to expand...
Click to collapse
Because it's very important that i get the phone fixed!

How could you flash Omni with stock recovery? You need TWRP with stock it won't work.
Gesendet von meinem P6-U06

taaeem said:
How could you flash Omni with stock recovery? You need TWRP with stock it won't work.
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
That's the problem dude! I can't do ****, now! I can't flash anything!

kamphoz said:
That's the problem dude! I can't do ****, now! I can't flash anything!
Click to expand...
Click to collapse
Try downloading stock B506 and load onto dload and reinstall it.
If that still doesn't work then try this, but I think you'll need to be in fastboot mode...
EDIT: Just follow instructions on my thread for the TWRP Installer.
Use my tool here to install twrp.
http://forum.xda-developers.com/showthread.php?t=2709607
1. Download my tool.
2. Extract.
3. Open TWRP installer. Make sure your phone is in fastboot mode.
4. Choose option 1. When it asks you which rom you use, choose 3 (skip).
5. Hold down power and vol(+) and vol (-) buttons.
6. Click wipe button in twrp. Wipe system, dalvik cache, data, cust, internal storage. Note: you will lose all your data.
7. Then go back to main menu, choose install.
8. Find your zip you put on your sd card and swipe to install.
9. Reboot and have fun with OMNI rom.
Sent from my P6-U06 using xda app-developers app

kamphoz said:
That's the problem dude! I can't do ****, now! I can't flash anything!
Click to expand...
Click to collapse
Hi !
If you already flashed B506CN, you can flash now stock recovery for B506CN , to be able to flash UPDATE.APP from/dload folder !
Put your device in bootloader mode :
> adb reboot bootloader
or
> please press and keep, at the same time : power and volume down till your device shut-down ! Now , release power button but keep pressing volume down till you see Huawei logo : Huawei Ascend ! - In this moment you are in bootloader mode, and you can flash stock recovery for B506 from here !
Good luck !

surdu_petru said:
Hi !
If you already flashed B506CN, you can flash now stock recovery for B506CN , to be able to flash UPDATE.APP from/dload folder !
Put your device in bootloader mode :
> adb reboot bootloader
or
> please press and keep, at the same time : power and volume down till your device shut-down ! Now , release power button but keep pressing volume down till you see Huawei logo : Huawei Ascend ! - In this moment you are in bootloader mode, and you can flash stock recovery for B506 from here !
Good luck !
Click to expand...
Click to collapse
bokchoi2020 said:
Try downloading stock B506 and load onto dload and reinstall it.
If that still doesn't work then try this, but I think you'll need to be in fastboot mode...
EDIT: Just follow instructions on my thread for the TWRP Installer.
Use my tool here to install twrp.
http://forum.xda-developers.com/showthread.php?t=2709607
1. Download my tool.
2. Extract.
3. Open TWRP installer. Make sure your phone is in fastboot mode.
4. Choose option 1. When it asks you which rom you use, choose 3 (skip).
5. Hold down power and vol(+) and vol (-) buttons.
6. Click wipe button in twrp. Wipe system, dalvik cache, data, cust, internal storage. Note: you will lose all your data.
7. Then go back to main menu, choose install.
8. Find your zip you put on your sd card and swipe to install.
9. Reboot and have fun with OMNI rom.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Thank you both of you! It's great to get so much help! But that's not really the problem. I am, not able to boot into bootloader, as i can't boot the phone, neither can i flash ANY Updates, using the dload, i tryed to flash omni, and pac-man, i also tryed to flash the twrp zip file, but i't won't allow me to flash anything. i will just get signature verification failed. When i use adb devices, i get "?". You guy's think theres any hope?

kamphoz said:
You guy's think theres any hope?
Click to expand...
Click to collapse
Just follow instructions from the link I gave you and you should be fine, or follow surdu's 2nd method.
Sent from my P6-U06 using xda app-developers app

kamphoz said:
Thank you both of you! It's great to get so much help! But that's not really the problem. I am, not able to boot into bootloader, as i can't boot the phone, neither can i flash ANY Updates, using the dload, i tryed to flash omni, and pac-man, i also tryed to flash the twrp zip file, but i't won't allow me to flash anything. i will just get signature verification failed. When i use adb devices, i get "?". You guy's think theres any hope?
Click to expand...
Click to collapse
Then everything is fine I think but by the way you can't never flash a custom ROM with stock recovery you need always TWRP and this you must flash in bootloader mode the ? Are all fine fastboot sees your device so you can flash a recovery.
Gesendet von meinem HUAWEI P6-C00

bokchoi2020 said:
Just follow instructions from the link I gave you and you should be fine, or follow surdu's 2nd method.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
But don't your installer need to have my phone booted?

taaeem said:
Then everything is fine I think but by the way you can't never flash a custom ROM with stock recovery you need always TWRP and this you must flash in bootloader mode the ? Are all fine fastboot sees your device so you can flash a recovery.
Gesendet von meinem HUAWEI P6-C00
Click to expand...
Click to collapse
I know. But i panicked so i just tryed, everything to save my phone really. But adb only shows "?"

kamphoz said:
I know. But i panicked so i just tryed, everything to save my phone really. But adb only shows "?"
Click to expand...
Click to collapse
Only one"?" or many if many it should be okay, if only one I don't know try to flash TWRP when it works good if not nothing is worst than now I would say.
Gesendet von meinem HUAWEI P6-C00

taaeem said:
Only one"?" or many if many it should be okay, if only one I don't know try to flash TWRP when it works good if not nothing is worst than now I would say.
Gesendet von meinem HUAWEI P6-C00
Click to expand...
Click to collapse
Its okay now ^^

Related

Returning to Original Firmware

Hello,
I have tested a ROM, it worked very well, however I want to return to a original firmware. I have the file but How can I installed since everytime I restart my phone it restart on TWRP mode, how can I make my phone recognize the firmware I want to install?
Thanks,
Sennincito said:
Hello,
I have tested a ROM, it worked very well, however I want to return to a original firmware. I have the file but How can I installed since everytime I restart my phone it restart on TWRP mode, how can I make my phone recognize the firmware I want to install?
Thanks,
Click to expand...
Click to collapse
Flash stock recovery through ADB
Sent from my P6-U00 using Tapatalk
what is the best stock firmware ? I mean what version ?
lookfor said:
what is the best stock firmware ? I mean what version ?
Click to expand...
Click to collapse
I would advise B125.
KK Beta is cool, too, but notification-managing apps don't work, and it drains your battery faster
lootjelo said:
I would advise B125.
KK Beta is cool, too, but notification-managing apps don't work, and it drains your battery faster
Click to expand...
Click to collapse
lootjelo,
I have removed the TWRP successfully, however when I try to install firmware B125 it keeps giving me a Fail message.
I have tried updating using configuration->update... etc, and also trying to install it using power+vol up/down method, but keeps me saying Fail.
I have tried B111 and B125, so I believe is not the firmware.
Sennincito said:
lootjelo,
I have removed the TWRP successfully, however when I try to install firmware B125 it keeps giving me a Fail message.
I have tried updating using configuration->update... etc, and also trying to install it using power+vol up/down method, but keeps me saying Fail.
I have tried B111 and B125, so I believe is not the firmware.
Click to expand...
Click to collapse
Move the dload folder to internal storage
Sent from my P6-U06 using Tapatalk
lootjelo said:
Move the dload folder to internal storage
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
It is on internal storage, however, Im trying to install b125 which i guess is jelly bean and I have 4.4.2 kit kat, could this be the problem?
if is not, then I dont know what could be since dload is on internal storage.
Sennincito said:
It is on internal storage, however, Im trying to install b125 which i guess is jelly bean and I have 4.4.2 kit kat, could this be the problem?
if is not, then I dont know what could be since dload is on internal storage.
Click to expand...
Click to collapse
That's definitely not the problem. Try redownloading the update.app
Sent from my P6-U06 using Tapatalk
lootjelo said:
That's definitely not the problem. Try redownloading the update.app
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
I did, actually I've tried two different firmwares, both are giving me the fail error, this is the message on screen:
Checking Module MD5RSA... OK
Checking Module CRC... OK
Checking Module CURVER... OK
Checking Module VERLIST... OK
Huawei SD card update fail........
BUT!!! dload folder its on SD Card
Sennincito said:
I did, actually I've tried two different firmwares, both are giving me the fail error, this is the message on screen:
Checking Module MD5RSA... OK
Checking Module CRC... OK
Checking Module CURVER... OK
Checking Module VERLIST... OK
Huawei SD card update fail........
BUT!!! dload folder its on SD Card
Click to expand...
Click to collapse
It's on your external SD? Like I said, move it to your internal SD.
Sent from my P6-U06 using Tapatalk
lootjelo said:
It's on your external SD? Like I said, move it to your internal SD.
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
Sorry, I meant its on Internal SD, actually its also on External SD as my back up.
Sennincito said:
Sorry, I meant its on Internal SD, actually its also on External SD as my back up.
Click to expand...
Click to collapse
That could be your problem. Rename the dload folder on your external sd to whatever you'd like. Just make sure there's only one dload folder.
Sent from my P6-U06 using Tapatalk
lootjelo said:
That could be your problem. Rename the dload folder on your external sd to whatever you'd like. Just make sure there's only one dload folder.
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
I have removed my external copy and I left only my internal copy, the result is the same... FAIL
Actually I think that you need to return to stock recovery and then use the update.app.
To do that you must be familiar with adb and then follow the instructions given at the [INDEX] Club Huawei Meets XDA [ News / Leaks / Mods / ROMS ] .
As it states:
Download Stock_Recovery_B118.zip
Put your device in fastboot mode ( > adb reboot bootloader )
Flash recovery via fastboot ( fastboot flash recovery recovery.img )
Reboot via fastboot ( fastboot reboot )
If you need more help regarding the above procedure read very very carefully this and follow the given steps.
In any case you must bare in mind that since you have KK rom you have changed your recovery and probably this is the reason you cant go back to an original firmware by simple using the update.app.
Good luck
halman said:
Actually I think that you need to return to stock recovery and then use the update.app.
To do that you must be familiar with adb and then follow the instructions given at the [INDEX] Club Huawei Meets XDA [ News / Leaks / Mods / ROMS ] .
As it states:
Download Stock_Recovery_B118.zip
Put your device in fastboot mode ( > adb reboot bootloader )
Flash recovery via fastboot ( fastboot flash recovery recovery.img )
Reboot via fastboot ( fastboot reboot )
If you need more help regarding the above procedure read very very carefully this and follow the given steps.
In any case you must bare in mind that since you have KK rom you have changed your recovery and probably this is the reason you cant go back to an original firmware by simple using the update.app.
Good luck
Click to expand...
Click to collapse
Thank you halman, I did flash the recovery.img, however again FAIL.
Sennincito said:
Thank you halman, I did flash the recovery.img, however again FAIL.
Click to expand...
Click to collapse
Hmm, that's odd..
Just to make things clear
1. What rom you used before?
2. What recovery are you on now (stock, TWRP, CWM) ?
Also try this. If you have made a nandroid backup before you may follow the instructions in this post from surdu to put TWRP in your p6 and restore it.
halman said:
Hmm, that's odd..
Just to make things clear
1. What rom you used before?
2. What recovery are you on now (stock, TWRP, CWM) ?
Also try this. If you have made a nandroid backup before you may follow the instructions in this post from surdu to put TWRP in your p6 and restore it.
Click to expand...
Click to collapse
I am in ROM HYD52ROM_V7
I have removed TWRP and using Stock (i guess), the normal recovery.
Sennincito said:
I am in ROM HYD52ROM_V7
I have removed TWRP and using Stock (i guess), the normal recovery.
Click to expand...
Click to collapse
Can you check it? Power off and then power on your phone while holding only the volume up (+) button. If it is stock then you shoud see the 3e recovery (if I remember correctly). If not then you haven't the stock recovery.
One more thing. Your phone works ok? I mean that it boots and the it works as it should? Because if you change the recovery, then you probably should have a bootloop with the HYD52ROM_V7 (just a guess, not sure)
halman said:
Can you check it? Power off and then power on your phone while holding only the volume up (+) button. If it is stock then you shoud see the 3e recovery (if I remember correctly). If not then you haven't the stock recovery.
One more thing. Your phone works ok? I mean that it boots and the it works as it should? Because if you change the recovery, then you probably should have a bootloop with the HYD52ROM_V7 (just a guess, not sure)
Click to expand...
Click to collapse
It does says 3e recovery.
My phone works very well, I have no problems rebooting, calling, etc, however I´ve noticed I have connectivity issues, I can send mails, photos, MMS, SMS, BUT i cannot receive any photo or open any webpage (only using WiFi), so I want to return to the original firmware.
Sennincito said:
It does says 3e recovery.
My phone works very well, I have no problems rebooting, calling, etc, however I´ve noticed I have connectivity issues, I can send mails, photos, MMS, SMS, BUT i cannot receive any photo or open any webpage (only using WiFi), so I want to return to the original firmware.
Click to expand...
Click to collapse
I am sorry but I ran out of ideas..since you have stock recovery it should work.
If you dont have a nandroid backup I really dont know any other method to tell you besides the update.app.

Brick the phone! HEEEELP!

Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
mathius89 said:
Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
Click to expand...
Click to collapse
More info please. What ROM you were before and what ROM did you flashed upon that one. What cwm, touch cwm? From now on install TWRP, it's better, safer and more stable.
BeyondTheHorizon said:
More info please. What ROM you were before and what ROM did you flashed upon that one. What cwm, touch cwm? From now on install TWRP, it's better, safer and more stable.
Click to expand...
Click to collapse
Before JB had the factory, and installed the [ROM] Huawei KK_ P6_all in EN (BbN) _based on_repack SLMINSK, restarting the mobile I stay in the Huawei logo.
The recovery is this: http://forum.xda-developers.com/showthread.php?t=2417919.
Next time will install the TWRP but now you do not.
mathius89 said:
Before JB had the factory, and installed the [ROM] Huawei KK_ P6_all in EN (BbN) _based on_repack SLMINSK, restarting the mobile I stay in the Huawei logo.
The recovery is this: http://forum.xda-developers.com/showthread.php?t=2417919.
Next time will install the TWRP but now you do not.
Click to expand...
Click to collapse
It takes more than five minutes for the new ROM to boot. It taked longer ? And also you should follow tutorials in here about flashing ROM's and how/what recovery you should install at the right time during the upgrading process. Especially when you upgrade from JellyBean to KitKat.
BeyondTheHorizon said:
It takes more than five minutes for the new ROM to boot. It taked longer ? And also you should follow tutorials in here about flashing ROM's and how/what recovery you should install at the right time during the upgrading process. Especially when you upgrade from JellyBean to KitKat.
Click to expand...
Click to collapse
I left 30 minutes and never passed the Huawei logo ... No solution?
mathius89 said:
I left 30 minutes and never passed the Huawei logo ... No solution?
Click to expand...
Click to collapse
Well, you must look for a tutorial on how to flash stock recovery and install stock ROM again.
mathius89 said:
Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
Click to expand...
Click to collapse
did you wipe dalvik and cache ? if not try to do this in recovery, most bootloops are caused by this
mathius89 said:
I left 30 minutes and never passed the Huawei logo ... No solution?
Click to expand...
Click to collapse
CWM is not permanent recovery, put the UPDATE. APP in dload FOLDER on SD card and boot phone via 3 buttons.
Next time read thread carefully and use TWRP.
Sent from my HUAWEI P6-U06 using Tapatalk
alex.79 said:
CWM is not permanent recovery, put the UPDATE. APP in dload FOLDER on SD card and boot phone via 3 buttons.
Next time read thread carefully and use TWRP.
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
mathius89 said:
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
Click to expand...
Click to collapse
Official firmware from Huawei. Has a many thread here in XDA.
Sent from my HUAWEI P6-U06 using Tapatalk
mathius89 said:
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
Click to expand...
Click to collapse
You flashed from CWM, that's why you have this problem. Download a ROM that can be flashed by dload method, and that ROM must be a stock ROM. Stock ROM's are not in a flashable zip's format, but they are in a form of an update.app file.
Create a folder in your sdcard and name it dload. In dload folder put the update.app file. After that press volume up + down + power button all at once until you see the HUAWEI logo, after that release those buttons.
For this to work you must have stock recovery.
BeyondTheHorizon said:
You flashed from CWM, that's why you have this problem. Download a ROM that can be flashed by dload method, and that ROM must be a stock ROM. Stock ROM's are not in a flashable zip's format, but they are in a form of an update.app file.
Create a folder in your sdcard and name it dload. In dload folder put the update.app file. After that press volume up + down + power button all at once until you see the HUAWEI logo, after that release those buttons.
For this to work you must have stock recovery.
Click to expand...
Click to collapse
Ok, when I can I will try. Thank you very much!
mathius89 said:
Ok, when I can I will try. Thank you very much!
Click to expand...
Click to collapse
You're welcome. Good luck and enjoy the new firmware.

Help me urgente

For God's sake, not my tablet comes out of this screen. I updated to version CyanogenMod 12.1. Everything was cool, I went for a reset manufactures and not comes out of this screen. Solution or have I lost my device
May we can help you - but I understand nearly nothing in your inquiry. Did you have the TWRP screen by reboot? Did you flash the specific device recovery? For the N5100 / N5110 / N5120 are several recoverys available. A wrong recovery can brick your device....
redukt said:
May we can help you - but I understand nearly nothing in your inquiry. Did you have the TWRP screen by reboot? Did you flash the specific device recovery? For the N5100 / N5110 / N5120 are several recoverys available. A wrong recovery can brick your device....
Click to expand...
Click to collapse
Friend I updated with his rom and I was doing a reset of factory and was only on this screen.
Did you do the factory reset by TWRP or on cm12.1? Which TWRP is on your device? It seems your recovery stands in conflict.
redukt said:
Did you do the factory reset by TWRP or on cm12.1? Which TWRP is on your device? It seems your recovery stands in conflict.
Click to expand...
Click to collapse
I used TWRP-2850-N5100-3G.img and now as I do friend
redukt said:
Did you do the factory reset by TWRP or on cm12.1? Which TWRP is on your device? It seems your recovery stands in conflict.
Click to expand...
Click to collapse
rom the very showed he had a new rom and did just upgrade. as a result did not see, I did a reset and it so. Rom showed it was only 3g tablet that is not phone. help me friend. is that I lost my tablet.
Try to reflash the recovery. Then rom / gapps.
Gesendet von meinem GT-N5100 mit Tapatalk
redukt said:
Try to reflash the recovery. Then rom / gapps.
Gesendet von meinem GT-N5100 mit Tapatalk
Click to expand...
Click to collapse
But friends do not come out of this screen, I can not do anything
edglaston said:
But friends do not come out of this screen, I can not do anything
Click to expand...
Click to collapse
I holding Power + Volume Up + home only is this screen
edglaston said:
I holding Power + Volume Up + home only is this screen
Click to expand...
Click to collapse
I think I figured out the problem, I updated the rom another model, my model is the GT-N5100 and see that this is the GT-N5110 model. I think I damaged my tablet.
Nope, you can wipe / format your system. Take the N5100 recovery and flash it via ADB. Reboot in recovery and flash the right rom / gapps.
redukt said:
Nope, you can wipe / format your system. Take the N5100 recovery and flash it via ADB. Reboot in recovery and flash the right rom / gapps.
Click to expand...
Click to collapse
you could explain to me step by step how I do it. As I said it is locked on that screen.
They´re so many threads here on XDA with flashinstructions / ADB. Pls use the forum search engine
redukt said:
They´re so many threads here on XDA with flashinstructions / ADB. Pls use the forum search engine
Click to expand...
Click to collapse
friend help me, I am newbie. Tell a method or show me a link
edglaston said:
friend help me, I am newbie. Tell a method or show me a link
Click to expand...
Click to collapse
I put the USB cable and the tablet does not appear on the computer
Well you have to install drivers for your device pls google for it.
And then follow those instructions.
You have to reboot your device in bootloader mode bye volume down, homebutton and power.

My 1+ 3 won´t boot recovery or system

hey guys,
i have a big problem.
i unlocked my one+ 3 2 weeks ago and installed twrp and cm13. all worked fine.
yesterday i read the news from cm the first devices will get offical cm14.
so i donwloaded the first rom and updated my phone (without a wipe!).
the cm14 starts good and all worked fine.
But, i find out, i can´t hear a phone call.
so, i want to go back to the twrp to restore my backup of cm13.
the problems begins....
i can´t boot twrp. i see the bootloader screen and after switching the screen to recovery (normaly) i got a black screen (seems like to shut off the screen).
then i tried to reinstall it, nothing.
after a full evening of trying i wiped it (factory reset) from android 7.
after the reboot i got the same problem. -> black screen after bootscreen Android won´t start, recovery won´t start.
then i downloaded a toolbox and installed the stock recovery -> no change -> black screen.
then i tried to find a stock image als *.img format to flash it with all (kernel and recovery, etc) with fastboot, but i didn´t find an image.
my last try was to make a full wipe with "fastboot -w". but this won´t work too.
so, now my phone will only boot into fastboot and thats it.
i need urgend help.
can anyone tell me what i can do? how can i install any os and wipe via fastboot and with no recovery?
thx a lot for your help.
ravn
ravn83 said:
hey guys,
i have a big problem.
i unlocked my one+ 3 2 weeks ago and installed twrp and cm13. all worked fine.
yesterday i read the news from cm the first devices will get offical cm14.
so i donwloaded the first rom and updated my phone (without a wipe!).
the cm14 starts good and all worked fine.
But, i find out, i can´t hear a phone call.
so, i want to go back to the twrp to restore my backup of cm13.
the problems begins....
i can´t boot twrp. i see the bootloader screen and after switching the screen to recovery (normaly) i got a black screen (seems like to shut off the screen).
then i tried to reinstall it, nothing.
after a full evening of trying i wiped it (factory reset) from android 7.
after the reboot i got the same problem. -> black screen after bootscreen Android won´t start, recovery won´t start.
then i downloaded a toolbox and installed the stock recovery -> no change -> black screen.
then i tried to find a stock image als *.img format to flash it with all (kernel and recovery, etc) with fastboot, but i didn´t find an image.
my last try was to make a full wipe with "fastboot -w". but this won´t work too.
so, now my phone will only boot into fastboot and thats it.
i need urgend help.
can anyone tell me what i can do? how can i install any os and wipe via fastboot and with no recovery?
thx a lot for your help.
ravn
Click to expand...
Click to collapse
Lots off people are getting this problem and trust me for some reason people post steps to fix this that are complicated for people who are just getting to playing around with TWRP.
Look, download the original TWRP recovery from here, https://dl.twrp.me/oneplus3/ the one you need is the 3.0.2-1 . I used it and I got back to MC13 From MC14.1 which by the way is now working pretty good. Once you fastboot flash recovery .this 3.0.2-1 recovery you can actually use it with MC14.1 as am doing right now. In any case. flash recovery >factory reset > adb your MC13 Zip to the phone > reboot...
Remember All Of This Steps Are Always Taken At Your Own Risk !!
Best of luck!!! [emoji6]
Sent from my ONEPLUS A3000 using Tapatalk
DiMatador said:
Lots off people are getting this problem and trust me for some reason people post steps to fix this that are complicated for people who are just getting to playing around with TWRP.
Look, download the original TWRP recovery from here, https://dl.twrp.me/oneplus3/ the one you need is the 3.0.2-1 . I used it and I got back to MC13 From MC14.1 which by the way is now working pretty good. Once you fastboot flash recovery .this 3.0.2-1 recovery you can actually use it with MC14.1 as am doing right now. In any case. flash recovery >factory reset > adb your MC13 Zip to the phone > reboot...
Remember All Of This Steps Are Always Taken At Your Own Risk !!
Best of luck!!! [emoji6]
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply.
to flash only the new recovery will not help.
tomorrow i will try to flash, wipe (with "fastboot -w" and copy the zip file.
Will the copy install the cm13 version? or do u mean sideload to have the cm13 zip for the twrp to flash?
Try to flash the modified twrp. Check the official topic for cm 14, it is linked over there
Edit: this one http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
superiscch said:
Try to flash the modified twrp. Check the official topic for cm 14, it is linked over there
Edit: this one http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
@superiscch just provided you with the TWRP that works. This is what i did !
Flash the recovery provided on the link >boot to the new recovery, you well see the version at the top left corner as 3.0.2-1 > factory reset > adb sideload the MC 13 ....... Reboot system > than add your choice of google apps to the sdcard root > reboot to recovery > flash google apps from with recovery than reboot, you would be golden. After, if your interested just flash the TWRP from the original twrp team. Cuss the one you just installed is modified, it be your choice !!
Sent from my ONEPLUS A3000 using Tapatalk
Hey guys,
thx for your replay. i will try it after work.
but i have one question ... what do u mean exactly with " adb your MC13 Zip"?
do u mean to transfer the zip to install with twrp or is there a command to install the zip to the systempartition?
ravn83 said:
Hey guys,
thx for your replay. i will try it after work.
but i have one question ... what do u mean exactly with " adb your MC13 Zip"?
do u mean to transfer the zip to install with twrp or is there a command to install the zip to the systempartition?
Click to expand...
Click to collapse
Okay... Look, once you have flash the modified recovery and you reboot. You be able to boot to your OS. Than you have to simple options 1. Load the CM13 ZIP file to your sdcard which you can use for installing with recovery
2. Boot into recovery and side load the MC 13 ZIP file into your phone using adb...sideload would be using adb
ADB... adb sideload <name of file> without the brackets...
Good luck man
Sent from my ONEPLUS A3000 using Tapatalk
Thx a lot guys, now it works and in installed my phone successfully.
it was the wrong twrp version.
now, the weekend is save :silly:
ravn83 said:
Thx a lot guys, now it works and in installed my phone successfully.
it was the wrong twrp version.
now, the weekend is save :silly:
Click to expand...
Click to collapse
Alriiiight !!
Sent from my ONEPLUS A3000 using Tapatalk

Back to stock OxygenOS (OP3)

I found 2 versions of the instruction about going back from custom ROM to stock OxygenOS. First one tells about ADB commands which results with full stock, with standard recovery, unrooted system and locked phone. The second one is shorter, it's just flashing official zip with TWRP.
So my question is: Am I "losing something" after going with the second option, I mean TWRP-way? As I understand the only difference is that I'll keep TWRP itself and my phone will still be unlocked, when everything else will be ok (official camera firmware, kernel, etc.).
Thank you in advance for the answer if I'm wrong
The official zips in most cases also erase your twrp recovery and you will end up with the stock recovery and unlocked bootloader
I'm also thinking about going back to Oxygenos. But haven't done it. Looking for answers for you question.
Besides, could you please give me the link for the first method? Thanks
It's like flashing any other Rom? You clean flash by wiping everything (except Internal) and flash the OxygenOS you want (plus SuperUser).
Heres what you gonna do
Download oos full zip
Flash it on twrp then after that dont do a reboot just flash twrp as recovery then reboot to recovery and then reboot to system
If you wanna lock the bootloader and stay fully stock ( this will wipe your whole phone so backup )
Then flash oos full zip through twrp then reboot to bootloader
Then sideload oos recovery
Then go back to bootloader and relock bootloader thats it
Sent from my ONEPLUS A3003 using Tapatalk
You want to ADB push?
Go to OnePlus site. There you have step by step instructions.
HIshan Pavidu said:
Heres what you gonna do
Download oos full zip
Flash it on twrp then after that dont do a reboot just flash twrp as recovery then reboot to recovery and then reboot to system
If you wanna lock the bootloader and stay fully stock ( this will wipe your whole phone so backup )
Then flash oos full zip through twrp then reboot to bootloader
Then sideload oos recovery
Then go back to bootloader and relock bootloader thats it
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
I want to keep twrp and stay unlocked
1. flash the oos full zip
2. reboot to fastboot mode and flash twrp
3. go to twrp and reboot to system
Is this right?
Besides, I'm using twrp 3.0.4-1. Does it matter?
JonathanKang said:
I want to keep twrp and stay unlocked
1. flash the oos full zip
2. reboot to fastboot mode and flash twrp
3. go to twrp and reboot to system
Is this right?
Besides, I'm using twrp 3.0.4-1. Does it matter?
Click to expand...
Click to collapse
They both works but my way dont need a pc so
Sent from my ONEPLUS A3003 using Tapatalk
HIshan Pavidu said:
They both works but my way dont need a pc so
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Ahh. Got it.
JonathanKang said:
Ahh. Got it.
Click to expand...
Click to collapse
Good luck huh!
Sent from my ONEPLUS A3003 using Tapatalk
HIshan Pavidu said:
Good luck huh!
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
I clean flashed the full zip. When I try to boot to bootloader, it didn't enter bootloader mode. The system boots, and it's been showing boot animation for more than ten minutes. I'll wait patiently.
BTW, how do you flash twrp while you are in twrp?
JonathanKang said:
I clean flashed the full zip. When I try to boot to bootloader, it didn't enter bootloader mode. The system boots, and it's been showing boot animation for more than ten minutes. I'll wait patiently.
BTW, how do you flash twrp while you are in twrp?
Click to expand...
Click to collapse
What i did was
Flashed the full zip
Before rebooting flashed twrp.img through twrp
Then reboot to twrp abd reboot to system i do it every time
Sent from my ONEPLUS A3003 using Tapatalk
HIshan Pavidu said:
What i did was
Flashed the full zip
Before rebooting flashed twrp.img through twrp
Then reboot to twrp abd reboot to system i do it every time
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
What I wanna ask is how do you flash twrp.img through twrp?
JonathanKang said:
What I wanna ask is how do you flash twrp.img through twrp?
Click to expand...
Click to collapse
When your on twrp go to install then to the right corner youll see a tab named flash img clikc that and browse to your twrp flash it then it will ask system , recovery or bootloader click recovery then flash when it finished reboot to recovery
I hope you understand if not just google it
Sent from my ONEPLUS A3003 using Tapatalk
HIshan Pavidu said:
When your on twrp go to install then to the right corner youll see a tab named flash img clikc that and browse to your twrp flash it then it will ask system , recovery or bootloader click recovery then flash when it finished reboot to recovery
I hope you understand if not just google it
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Okay. Never notice that tab in the corner.
So right now, I end up with oxygenos(still booting...) without twrp.
JonathanKang said:
Okay. Never notice that tab in the corner.
So right now, I end up with oxygenos(still booting...) without twrp.
Click to expand...
Click to collapse
Try holding power button till it restart and see if you can load to bootloader then sideload twrp then do what i said
Good luck
If it wont load bootloader i think its bricked or something
Sent from my ONEPLUS A3003 using Tapatalk
HIshan Pavidu said:
Try holding power button till it restart and see if you can load to bootloader then sideload twrp then do what i said
Good luck
If it wont load bootloader i think its bricked or something
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Force shutdown the device and entered fastboot, flashed twrp recovery. And now twrp asks me to input password to decrypt data. I have no idea about what the password is. I also got dm-verity error after flashing the full zip. Help needed.
JonathanKang said:
Force shutdown the device and entered fastboot, flashed twrp recovery. And now twrp asks me to input password to decrypt data. I have no idea about what the password is. I also got dm-verity error after flashing the full zip. Help needed.
Click to expand...
Click to collapse
Im sorry i have to say this but you might wanna sideload oos recovery then sideload oos full zip and see if its boot then try again
Edit :- you might wanna wipe everything before sideload idk try without wiping anything
Sent from my ONEPLUS A3003 using Tapatalk
HIshan Pavidu said:
Im sorry i have to say this but you might wanna sideload oos recovery then sideload oos full zip and see if its boot then try again
Edit :- you might wanna wipe everything before sideload idk try without wiping anything
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
I did a factory reset in twrp, and the system boots well. But unfortunately I lost all my data. Factory reset also formats internal storage?
I have all my photos backed up in google photos. The only loss is the image quality is not original. Anyway it's not end of the world.
JonathanKang said:
I did a factory reset in twrp, and the system boots well. But unfortunately I lost all my data. Factory reset also formats internal storage?
I have all my photos backed up in google photos. The only loss is the image quality is not original. Anyway it's not end of the world.
Click to expand...
Click to collapse
Your good then right? Cuz i gotta go flash rr ?
Sent from my ONEPLUS A3003 using Tapatalk

Categories

Resources