Hello,
I have tested a ROM, it worked very well, however I want to return to a original firmware. I have the file but How can I installed since everytime I restart my phone it restart on TWRP mode, how can I make my phone recognize the firmware I want to install?
Thanks,
Sennincito said:
Hello,
I have tested a ROM, it worked very well, however I want to return to a original firmware. I have the file but How can I installed since everytime I restart my phone it restart on TWRP mode, how can I make my phone recognize the firmware I want to install?
Thanks,
Click to expand...
Click to collapse
Flash stock recovery through ADB
Sent from my P6-U00 using Tapatalk
what is the best stock firmware ? I mean what version ?
lookfor said:
what is the best stock firmware ? I mean what version ?
Click to expand...
Click to collapse
I would advise B125.
KK Beta is cool, too, but notification-managing apps don't work, and it drains your battery faster
lootjelo said:
I would advise B125.
KK Beta is cool, too, but notification-managing apps don't work, and it drains your battery faster
Click to expand...
Click to collapse
lootjelo,
I have removed the TWRP successfully, however when I try to install firmware B125 it keeps giving me a Fail message.
I have tried updating using configuration->update... etc, and also trying to install it using power+vol up/down method, but keeps me saying Fail.
I have tried B111 and B125, so I believe is not the firmware.
Sennincito said:
lootjelo,
I have removed the TWRP successfully, however when I try to install firmware B125 it keeps giving me a Fail message.
I have tried updating using configuration->update... etc, and also trying to install it using power+vol up/down method, but keeps me saying Fail.
I have tried B111 and B125, so I believe is not the firmware.
Click to expand...
Click to collapse
Move the dload folder to internal storage
Sent from my P6-U06 using Tapatalk
lootjelo said:
Move the dload folder to internal storage
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
It is on internal storage, however, Im trying to install b125 which i guess is jelly bean and I have 4.4.2 kit kat, could this be the problem?
if is not, then I dont know what could be since dload is on internal storage.
Sennincito said:
It is on internal storage, however, Im trying to install b125 which i guess is jelly bean and I have 4.4.2 kit kat, could this be the problem?
if is not, then I dont know what could be since dload is on internal storage.
Click to expand...
Click to collapse
That's definitely not the problem. Try redownloading the update.app
Sent from my P6-U06 using Tapatalk
lootjelo said:
That's definitely not the problem. Try redownloading the update.app
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
I did, actually I've tried two different firmwares, both are giving me the fail error, this is the message on screen:
Checking Module MD5RSA... OK
Checking Module CRC... OK
Checking Module CURVER... OK
Checking Module VERLIST... OK
Huawei SD card update fail........
BUT!!! dload folder its on SD Card
Sennincito said:
I did, actually I've tried two different firmwares, both are giving me the fail error, this is the message on screen:
Checking Module MD5RSA... OK
Checking Module CRC... OK
Checking Module CURVER... OK
Checking Module VERLIST... OK
Huawei SD card update fail........
BUT!!! dload folder its on SD Card
Click to expand...
Click to collapse
It's on your external SD? Like I said, move it to your internal SD.
Sent from my P6-U06 using Tapatalk
lootjelo said:
It's on your external SD? Like I said, move it to your internal SD.
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
Sorry, I meant its on Internal SD, actually its also on External SD as my back up.
Sennincito said:
Sorry, I meant its on Internal SD, actually its also on External SD as my back up.
Click to expand...
Click to collapse
That could be your problem. Rename the dload folder on your external sd to whatever you'd like. Just make sure there's only one dload folder.
Sent from my P6-U06 using Tapatalk
lootjelo said:
That could be your problem. Rename the dload folder on your external sd to whatever you'd like. Just make sure there's only one dload folder.
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
I have removed my external copy and I left only my internal copy, the result is the same... FAIL
Actually I think that you need to return to stock recovery and then use the update.app.
To do that you must be familiar with adb and then follow the instructions given at the [INDEX] Club Huawei Meets XDA [ News / Leaks / Mods / ROMS ] .
As it states:
Download Stock_Recovery_B118.zip
Put your device in fastboot mode ( > adb reboot bootloader )
Flash recovery via fastboot ( fastboot flash recovery recovery.img )
Reboot via fastboot ( fastboot reboot )
If you need more help regarding the above procedure read very very carefully this and follow the given steps.
In any case you must bare in mind that since you have KK rom you have changed your recovery and probably this is the reason you cant go back to an original firmware by simple using the update.app.
Good luck
halman said:
Actually I think that you need to return to stock recovery and then use the update.app.
To do that you must be familiar with adb and then follow the instructions given at the [INDEX] Club Huawei Meets XDA [ News / Leaks / Mods / ROMS ] .
As it states:
Download Stock_Recovery_B118.zip
Put your device in fastboot mode ( > adb reboot bootloader )
Flash recovery via fastboot ( fastboot flash recovery recovery.img )
Reboot via fastboot ( fastboot reboot )
If you need more help regarding the above procedure read very very carefully this and follow the given steps.
In any case you must bare in mind that since you have KK rom you have changed your recovery and probably this is the reason you cant go back to an original firmware by simple using the update.app.
Good luck
Click to expand...
Click to collapse
Thank you halman, I did flash the recovery.img, however again FAIL.
Sennincito said:
Thank you halman, I did flash the recovery.img, however again FAIL.
Click to expand...
Click to collapse
Hmm, that's odd..
Just to make things clear
1. What rom you used before?
2. What recovery are you on now (stock, TWRP, CWM) ?
Also try this. If you have made a nandroid backup before you may follow the instructions in this post from surdu to put TWRP in your p6 and restore it.
halman said:
Hmm, that's odd..
Just to make things clear
1. What rom you used before?
2. What recovery are you on now (stock, TWRP, CWM) ?
Also try this. If you have made a nandroid backup before you may follow the instructions in this post from surdu to put TWRP in your p6 and restore it.
Click to expand...
Click to collapse
I am in ROM HYD52ROM_V7
I have removed TWRP and using Stock (i guess), the normal recovery.
Sennincito said:
I am in ROM HYD52ROM_V7
I have removed TWRP and using Stock (i guess), the normal recovery.
Click to expand...
Click to collapse
Can you check it? Power off and then power on your phone while holding only the volume up (+) button. If it is stock then you shoud see the 3e recovery (if I remember correctly). If not then you haven't the stock recovery.
One more thing. Your phone works ok? I mean that it boots and the it works as it should? Because if you change the recovery, then you probably should have a bootloop with the HYD52ROM_V7 (just a guess, not sure)
halman said:
Can you check it? Power off and then power on your phone while holding only the volume up (+) button. If it is stock then you shoud see the 3e recovery (if I remember correctly). If not then you haven't the stock recovery.
One more thing. Your phone works ok? I mean that it boots and the it works as it should? Because if you change the recovery, then you probably should have a bootloop with the HYD52ROM_V7 (just a guess, not sure)
Click to expand...
Click to collapse
It does says 3e recovery.
My phone works very well, I have no problems rebooting, calling, etc, however I´ve noticed I have connectivity issues, I can send mails, photos, MMS, SMS, BUT i cannot receive any photo or open any webpage (only using WiFi), so I want to return to the original firmware.
Sennincito said:
It does says 3e recovery.
My phone works very well, I have no problems rebooting, calling, etc, however I´ve noticed I have connectivity issues, I can send mails, photos, MMS, SMS, BUT i cannot receive any photo or open any webpage (only using WiFi), so I want to return to the original firmware.
Click to expand...
Click to collapse
I am sorry but I ran out of ideas..since you have stock recovery it should work.
If you dont have a nandroid backup I really dont know any other method to tell you besides the update.app.
Related
Hi guys.
I need some help. I updated to KK beta. I then tried to revert back to B125. somehow in the process i formatted everything and now i can not load any version of software. I only have the huawei recovery console. it keeps on telling me "installation aborted" when i try and install software.
Please help.
I do not have any software on the phone. what can i do to fix the problem?
Eject you sdcard, put a ROM in it and flash it through recovery. You have recovery right?
i get a installation aborted error when i try and recover. I have tried b111 b118 b120 and b125. same error. Which folder must the data be in? zipped or unzipped?
On the root of the sdcard, as a zip but flashable. Do you have stock or custom recovery? If it's stock put the update.app file in a folder called dload.Extract the update.app, put only that file in dload and press power and volume up/down all at once for a few seconds until it starts updating. Do not put the ZIP, only the file update.app.
tried and still not working. any other suggestions?
Do you have stock, custom or both recoveries?
Only stock revoery. had twrp installed but install the b118 stock recovery software. now im not able to install any software. phone is clean. no OS.
Well if you have stock recovery the update.app method must work. Do not put the zip in dload, only the update.app file. And repeat the 3 button method until it works.
Tried everything. nothing works
Dont connect usb when installing
He's right, unplug your phone while doing all of the above.
not connected via usb. is there any other way? any other roms to try?
Phone is fixed. thanks for the help
mr.f said:
not connected via usb. is there any other way? any other roms to try?
Click to expand...
Click to collapse
With stock recovery, not really.
mr.f said:
Phone is fixed. thanks for the help
Click to expand...
Click to collapse
what went wrong ?
mr.f said:
Phone is fixed. thanks for the help
Click to expand...
Click to collapse
Good.You are welcome.
how did you fix it?
warea said:
what went wrong ?
Click to expand...
Click to collapse
how did u fix it coz my phone has no os now and cant seem to install anything from recovery
Okay so i had my p6 for around 3 months now, and i have rooted it flash quite a lot roms. But 2 weeks ago i flash b506, and it was OK, didn't like the rom, but kinda just, used it. Then today i wanted to install omni rom, i used stock recovery, and now it's stuck on 'huawei ascend' logo. And i can't update to any softare using the power + vol up + vol down. It just comes up with a fail, i can't flash any custom roms. Im pretty, screwed. Please help!
Why open new topic?.......
kabirjedi said:
Why open new topic?.......
Click to expand...
Click to collapse
Because it's very important that i get the phone fixed!
How could you flash Omni with stock recovery? You need TWRP with stock it won't work.
Gesendet von meinem P6-U06
taaeem said:
How could you flash Omni with stock recovery? You need TWRP with stock it won't work.
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
That's the problem dude! I can't do ****, now! I can't flash anything!
kamphoz said:
That's the problem dude! I can't do ****, now! I can't flash anything!
Click to expand...
Click to collapse
Try downloading stock B506 and load onto dload and reinstall it.
If that still doesn't work then try this, but I think you'll need to be in fastboot mode...
EDIT: Just follow instructions on my thread for the TWRP Installer.
Use my tool here to install twrp.
http://forum.xda-developers.com/showthread.php?t=2709607
1. Download my tool.
2. Extract.
3. Open TWRP installer. Make sure your phone is in fastboot mode.
4. Choose option 1. When it asks you which rom you use, choose 3 (skip).
5. Hold down power and vol(+) and vol (-) buttons.
6. Click wipe button in twrp. Wipe system, dalvik cache, data, cust, internal storage. Note: you will lose all your data.
7. Then go back to main menu, choose install.
8. Find your zip you put on your sd card and swipe to install.
9. Reboot and have fun with OMNI rom.
Sent from my P6-U06 using xda app-developers app
kamphoz said:
That's the problem dude! I can't do ****, now! I can't flash anything!
Click to expand...
Click to collapse
Hi !
If you already flashed B506CN, you can flash now stock recovery for B506CN , to be able to flash UPDATE.APP from/dload folder !
Put your device in bootloader mode :
> adb reboot bootloader
or
> please press and keep, at the same time : power and volume down till your device shut-down ! Now , release power button but keep pressing volume down till you see Huawei logo : Huawei Ascend ! - In this moment you are in bootloader mode, and you can flash stock recovery for B506 from here !
Good luck !
surdu_petru said:
Hi !
If you already flashed B506CN, you can flash now stock recovery for B506CN , to be able to flash UPDATE.APP from/dload folder !
Put your device in bootloader mode :
> adb reboot bootloader
or
> please press and keep, at the same time : power and volume down till your device shut-down ! Now , release power button but keep pressing volume down till you see Huawei logo : Huawei Ascend ! - In this moment you are in bootloader mode, and you can flash stock recovery for B506 from here !
Good luck !
Click to expand...
Click to collapse
bokchoi2020 said:
Try downloading stock B506 and load onto dload and reinstall it.
If that still doesn't work then try this, but I think you'll need to be in fastboot mode...
EDIT: Just follow instructions on my thread for the TWRP Installer.
Use my tool here to install twrp.
http://forum.xda-developers.com/showthread.php?t=2709607
1. Download my tool.
2. Extract.
3. Open TWRP installer. Make sure your phone is in fastboot mode.
4. Choose option 1. When it asks you which rom you use, choose 3 (skip).
5. Hold down power and vol(+) and vol (-) buttons.
6. Click wipe button in twrp. Wipe system, dalvik cache, data, cust, internal storage. Note: you will lose all your data.
7. Then go back to main menu, choose install.
8. Find your zip you put on your sd card and swipe to install.
9. Reboot and have fun with OMNI rom.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Thank you both of you! It's great to get so much help! But that's not really the problem. I am, not able to boot into bootloader, as i can't boot the phone, neither can i flash ANY Updates, using the dload, i tryed to flash omni, and pac-man, i also tryed to flash the twrp zip file, but i't won't allow me to flash anything. i will just get signature verification failed. When i use adb devices, i get "?". You guy's think theres any hope?
kamphoz said:
You guy's think theres any hope?
Click to expand...
Click to collapse
Just follow instructions from the link I gave you and you should be fine, or follow surdu's 2nd method.
Sent from my P6-U06 using xda app-developers app
kamphoz said:
Thank you both of you! It's great to get so much help! But that's not really the problem. I am, not able to boot into bootloader, as i can't boot the phone, neither can i flash ANY Updates, using the dload, i tryed to flash omni, and pac-man, i also tryed to flash the twrp zip file, but i't won't allow me to flash anything. i will just get signature verification failed. When i use adb devices, i get "?". You guy's think theres any hope?
Click to expand...
Click to collapse
Then everything is fine I think but by the way you can't never flash a custom ROM with stock recovery you need always TWRP and this you must flash in bootloader mode the ? Are all fine fastboot sees your device so you can flash a recovery.
Gesendet von meinem HUAWEI P6-C00
bokchoi2020 said:
Just follow instructions from the link I gave you and you should be fine, or follow surdu's 2nd method.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
But don't your installer need to have my phone booted?
taaeem said:
Then everything is fine I think but by the way you can't never flash a custom ROM with stock recovery you need always TWRP and this you must flash in bootloader mode the ? Are all fine fastboot sees your device so you can flash a recovery.
Gesendet von meinem HUAWEI P6-C00
Click to expand...
Click to collapse
I know. But i panicked so i just tryed, everything to save my phone really. But adb only shows "?"
kamphoz said:
I know. But i panicked so i just tryed, everything to save my phone really. But adb only shows "?"
Click to expand...
Click to collapse
Only one"?" or many if many it should be okay, if only one I don't know try to flash TWRP when it works good if not nothing is worst than now I would say.
Gesendet von meinem HUAWEI P6-C00
taaeem said:
Only one"?" or many if many it should be okay, if only one I don't know try to flash TWRP when it works good if not nothing is worst than now I would say.
Gesendet von meinem HUAWEI P6-C00
Click to expand...
Click to collapse
Its okay now ^^
My Huawei p6 is stuck at Huawei Ascend Logo screen or in TWRP menu.
Here is the history :
-From the stock Firmware, its been updated to B132 > B512 > B708
-TWRP installed and rooted.
-SD card partitioned and used Link2sd.
- Phone was working quite OKEY.
What Happened :
- I was fumbling with the phone, and accidently I used TWRP Advanced wipe (data, dalvik cache, system)
Now whats happening :
- Phone stuck at Huawei Ascend Logo screen
- If i press vol+ + vol - +power buttons, it goes to TWRP menu.
- in the TWRP menu, it shows NO OS INSTALLED at various places.
What I tried :
- I put the B708 zip file to SD card and tried flashing from TWRP.
md5 file not found, failed installing zip. FAILED.
- I tried B512 zip file too. same result.
Now the phone is always ON, in the Huawei Ascend Logo screen.
Note :
- I am not an expert user.
- The phone is not getting detected in windows.
How shall I get back to the B708 OS or atleast the stock firmware ?
ozshire said:
My Huawei p6 is stuck at Huawei Ascend Logo screen or in TWRP menu.
Here is the history :
-From the stock Firmware, its been updated to B132 > B512 > B708
-TWRP installed and rooted.
-SD card partitioned and used Link2sd.
- Phone was working quite OKEY.
What Happened :
- I was fumbling with the phone, and accidently I used TWRP Advanced wipe (data, dalvik cache, system)
Now whats happening :
- Phone stuck at Huawei Ascend Logo screen
- If i press vol+ + vol - +power buttons, it goes to TWRP menu.
- in the TWRP menu, it shows NO OS INSTALLED at various places.
What I tried :
- I put the B708 zip file to SD card and tried flashing from TWRP.
md5 file not found, failed installing zip. FAILED.
- I tried B512 zip file too. same result.
Now the phone is always ON, in the Huawei Ascend Logo screen.
Note :
- I am not an expert user.
- The phone is not getting detected in windows.
How shall I get back to the B708 OS or atleast the stock firmware ?
Click to expand...
Click to collapse
Are the files that you putting on sd card official update files or custom ones? Twrp csn only flash custom ones for the official you need stock recovery.
Sent from my SM-G850F
tileeq said:
Are the files that you putting on sd card official update files or custom ones? Twrp csn only flash custom ones for the official you need stock recovery.
Sent from my SM-G850F
Click to expand...
Click to collapse
Thanks for the support Tileeq.
The ROM file is
" B708_Repack_NeoArnet.V3". The one I used to update to kitkat 4.4.2, got from the XDA forum itself.
http://forum.xda-developers.com/ascend-p6/general/ascend-p6-b708-emui-3-0-international-t2991646
ozshire said:
Thanks for the support Tileeq.
The ROM file is
" B708_Repack_NeoArnet.V3". The one I used to update to kitkat 4.4.2, got from the XDA forum itself.
http://forum.xda-developers.com/ascend-p6/general/ascend-p6-b708-emui-3-0-international-t2991646
Click to expand...
Click to collapse
You cannot use TWRP to flash neoarnet's rom. It is an update.app file, so you need to flash the stock recovery onto your device, and then create a dload folder in the root of your SD card, and place the update.app file into the dload folder.
Do a local update using the Updater application.
miz_pimp said:
You cannot use TWRP to flash neoarnet's rom. It is an update.app file, so you need to flash the stock recovery onto your device, and then create a dload folder in the root of your SD card, and place the update.app file into the dload folder.
Do a local update using the Updater application.
Click to expand...
Click to collapse
Okey, That was quite an useful Info.
But How do I go back to Stock recovery ?
Updater Application is within the stock recovery I guess.. ?
ozshire said:
Okey, That was quite an useful Info.
But How do I go back to Stock recovery ?
Updater Application is within the stock recovery I guess.. ?
Click to expand...
Click to collapse
No, the updater app is on your home screen.
It might be called System Update, or similar, if you're not on Emui 3.0.
How did you install TWRP? The process is the same, except you need the stock recovery. I can't give a detailed description now, but there are many guides explaining the process.
i got the same problem, my phone ran out of battery and then put it to charge and got stuck on the android logo, i cant install any rom, it was updated to kk with emui 3.0, i put the dload folder on the sd card root and when i try to open it it only appears ../, and if i put the boot.img on the sd card root it tries to install the os but tells me e: signature verification failed and stop installing
miz_pimp said:
No, the updater app is on your home screen.
It might be called System Update, or similar, if you're not on Emui 3.0.
How did you install TWRP? The process is the same, except you need the stock recovery. I can't give a detailed description now, but there are many guides explaining the process.
Click to expand...
Click to collapse
I think I missed to tell you that, it seems the phone got no OS now. Its not going further the Huawei Ascend Logo screen at Startup. Then how shall i run the updater ? I am confused.
Or are you telling me that I should install the STOCK RECOVERY just like I did TWRP ?
Wont it be easier if I find a TWRP compatible ROM ZIP (kk, emui 3.0 ) ?
ozshire said:
I think I missed to tell you that, it seems the phone got no OS now. Its not going further the Huawei Ascend Logo screen at Startup. Then how shall i run the updater ? I am confused.
Or are you telling me that I should install the STOCK RECOVERY just like I did TWRP ?
Wont it be easier if I find a TWRP compatible ROM ZIP (kk, emui 3.0 ) ?
Click to expand...
Click to collapse
Yep, you did. And yes, I meant that you can install the stock recovery the same way you installed TWRP (using fastboot commands).
I just assumed since you already had that firmware, that you'd want to update to that, but yes, it will be easier to just install a ROM that that you can flash through TWRP.
Let me know how it goes.
miz_pimp said:
Yep, you did. And yes, I meant that you can install the stock recovery the same way you installed TWRP (using fastboot commands).
I just assumed since you already had that firmware, that you'd want to update to that, but yes, it will be easier to just install a ROM that that you can flash through TWRP.
Let me know how it goes.
Click to expand...
Click to collapse
I flashed emui_3.0_b709_by_oxalis_p6-u06_v04.zip this time. ( it was b708 before in the phone)
Using TWRP and the rom zip file.
It was a success.
But now there is no network !!!!! No sim inserted !!!
What happened ???
So I bought this phone from a friend while I'm in china to use. It was running stock huawei JB when I got it and obviously it was less than stellar. So I rooted it, flashed the TWRP recovery and went on to flash CM11. I might have made a mistake doing that since I flashed from JB. Now my phone has a slew of problems such as it won't detect my sim, my computer doesn't detect it as a USB device anymore so I can't put any files on it; and there's no reboot menu at all; holding the power button just makes the screen a bit dark and that's it.
So I downloaded the emui KK file hoping to flash it but I can't flash that either. On TWRP trying to flash anything fails...unless it's the CM11 zip, which again leads to the same buggy results. I am at a loss here, what can I do to get it back to stock?
rxsahara said:
So I bought this phone from a friend while I'm in china to use. It was running stock huawei JB when I got it and obviously it was less than stellar. So I rooted it, flashed the TWRP recovery and went on to flash CM11. I might have made a mistake doing that since I flashed from JB. Now my phone has a slew of problems such as it won't detect my sim, my computer doesn't detect it as a USB device anymore so I can't put any files on it; and there's no reboot menu at all; holding the power button just makes the screen a bit dark and that's it.
So I downloaded the emui KK file hoping to flash it but I can't flash that either. On TWRP trying to flash anything fails...unless it's the CM11 zip, which again leads to the same buggy results. I am at a loss here, what can I do to get it back to stock?
Click to expand...
Click to collapse
If you have root then maybe theres hope.
Sent from my SM-G850F
tileeq said:
If you have root then maybe theres hope.
Sent from my SM-G850F
Click to expand...
Click to collapse
Still have root, and still have recovery (which again fails to flash anything else BUT the same Cm11)
What to do?
rxsahara said:
Still have root, and still have recovery (which again fails to flash anything else BUT the same Cm11)
What to do?
Click to expand...
Click to collapse
Download an app called rashr. It can flash recovery and boot img files. You can flash a stock with it and try to install stock rom with update.app method.
Sent from my SM-G850F
tileeq said:
Download an app called rashr. It can flash recovery and boot img files. You can flash a stock with it and try to install stock rom with update.app method.
Sent from my SM-G850F
Click to expand...
Click to collapse
Ok, once I have flashed stock recovery and the boot img. How would I go about flashing the update.app?
rxsahara said:
Ok, once I have flashed stock recovery and the boot img. How would I go about flashing the update.app?
Click to expand...
Click to collapse
Download the update.app from huawei (B512 is my suggestion).
http://dl.huaweinews.com/Roms/Ascend-P6/B512.zip
Unpack it and make sure its in a folder called dload on the root of the sdcard or internal storage.
Sent from my SM-G850F
Alright, downloading it now. Because I'm in china this is going to take a good 6 or 7 hours or so haha. What should I do after that?
tileeq said:
Download an app called rashr. It can flash recovery and boot img files. You can flash a stock with it and try to install stock rom with update.app method.
Sent from my SM-G850F
Click to expand...
Click to collapse
Also, where do I find the recovery and boot img files?
rxsahara said:
Also, where do I find the recovery and boot img files?
Click to expand...
Click to collapse
You can get them from the update.app file with the extractor.
http://forum.xda-developers.com/attachment.php?attachmentid=2630242&d=1394800571
Sent from my SM-G850F
i flashed new firmware to my htc one m8
I got into recovery and changed the name firmware file.
but now in the recovery it doesn't recognize my internal storage, kind of. it says 0 mb.
And when I try via adb to push a file to it it fails. (adb push filename.zip /sdcard/)
so it seems like i only have the external card now working.
what can I do?
I'm currently in the stage where i have the firmware file in the right name and it keeps asking me to update, if i remove the external card, i can get into recovery change the name, and then i see it won't read the internal storage like i wrote up here.
but after I change the name i can get into fastboot mode.
I currently have recovery mode - twrp 2.8.0.3
p.s I think my internal storage does work, cause i can go into recovery mode(twrp), my external_sd was formmated
before i used to update the firmware, so it has nothing except for that file
You're not flashing the firmware through recovery, are you?
No, i flashed, with the guide here, via an external card, changing the name of the firnware so the hboot would recognize it.. and update it
josh.walker.9242 said:
You're not flashing the firmware through recovery, are you?
Click to expand...
Click to collapse
I was thinking that maybe my twrp version 2.8.0.3 is too old for this bootloader veraion maybe, and i need to update to twrp to 2.8.6 and then try to transfer the rom file and install it.
What do u think?
Do u have any suggestions?
dav_sap said:
I was thinking that maybe my twrp version 2.8.0.3 is too old for this bootloader veraion maybe, and i need to update to twrp to 2.8.6 and then try to transfer the rom file and install it.
What do u think?
Do u have any suggestions?
Click to expand...
Click to collapse
I have TWRP 2.8.0.6. You can download TWRP manager from Play Store, it has a list of TWRP versions you can install. The app installs them too. Everytime I used the app to install it, it says it failed but it actually works, just install, then say ok to the failed install pop up and reboot into recovery and it'll be there.
Edit: As soon as the firmware has flashed successfully, boot up and delete the firmware file off of your external SD card so it doesn't keep asking you to update.
josh.walker.9242 said:
I have TWRP 2.8.0.6. You can download TWRP manager from Play Store, it has a list of TWRP versions you can install. The app installs them too. Everytime I used the app to install it, it says it failed but it actually works, just install, then say ok to the failed install pop up and reboot into recovery and it'll be there.
Click to expand...
Click to collapse
I have no OS now.
I need to download it, and flash it via fastboot. I'm wondering if that's the problem that the internal storage is giving me these problems or it has nothing to do with it.
Does a different firmware require different twrp versions?
Sent from my HTC Desire HD using XDA Free mobile app
dav_sap said:
I have no OS now.
I need to download it, and flash it via fastboot. I'm wondering if that's the problem that the internal storage is giving me these problems or it has nothing to do with it.
Does a different firmware require different twrp versions?
Sent from my HTC Desire HD using XDA Free mobile app
Click to expand...
Click to collapse
Not as far as I know. Your best bet man is probably to download an RUU and just flash that through fastboot or the external sd card method. Then after that, flash the TWRP then put a ROM zip on your phone and flash that way.
josh.walker.9242 said:
Not as far as I know. Your best bet man is probably to download an RUU and just flash that through fastboot or the external sd card method. Then after that, flash the TWRP then put a ROM zip on your phone and flash that way.
Click to expand...
Click to collapse
What RUU should i use? Isn't that just firmware like the one i flashed now?
dav_sap said:
What RUU should i use? Isn't that just firmware like the one i flashed now?
Click to expand...
Click to collapse
No, an RUU is a complete system install. Completely stock with the exception of some RUUs contain root. But it will wipe everything on your phone, all your personal data and what not.