Help me urgente - Galaxy Note 8.0 (Tablet) Q&A, Help & Troubleshooti

For God's sake, not my tablet comes out of this screen. I updated to version CyanogenMod 12.1. Everything was cool, I went for a reset manufactures and not comes out of this screen. Solution or have I lost my device

May we can help you - but I understand nearly nothing in your inquiry. Did you have the TWRP screen by reboot? Did you flash the specific device recovery? For the N5100 / N5110 / N5120 are several recoverys available. A wrong recovery can brick your device....

redukt said:
May we can help you - but I understand nearly nothing in your inquiry. Did you have the TWRP screen by reboot? Did you flash the specific device recovery? For the N5100 / N5110 / N5120 are several recoverys available. A wrong recovery can brick your device....
Click to expand...
Click to collapse
Friend I updated with his rom and I was doing a reset of factory and was only on this screen.

Did you do the factory reset by TWRP or on cm12.1? Which TWRP is on your device? It seems your recovery stands in conflict.

redukt said:
Did you do the factory reset by TWRP or on cm12.1? Which TWRP is on your device? It seems your recovery stands in conflict.
Click to expand...
Click to collapse
I used TWRP-2850-N5100-3G.img and now as I do friend

redukt said:
Did you do the factory reset by TWRP or on cm12.1? Which TWRP is on your device? It seems your recovery stands in conflict.
Click to expand...
Click to collapse
rom the very showed he had a new rom and did just upgrade. as a result did not see, I did a reset and it so. Rom showed it was only 3g tablet that is not phone. help me friend. is that I lost my tablet.

Try to reflash the recovery. Then rom / gapps.
Gesendet von meinem GT-N5100 mit Tapatalk

redukt said:
Try to reflash the recovery. Then rom / gapps.
Gesendet von meinem GT-N5100 mit Tapatalk
Click to expand...
Click to collapse
But friends do not come out of this screen, I can not do anything

edglaston said:
But friends do not come out of this screen, I can not do anything
Click to expand...
Click to collapse
I holding Power + Volume Up + home only is this screen

edglaston said:
I holding Power + Volume Up + home only is this screen
Click to expand...
Click to collapse
I think I figured out the problem, I updated the rom another model, my model is the GT-N5100 and see that this is the GT-N5110 model. I think I damaged my tablet.

Nope, you can wipe / format your system. Take the N5100 recovery and flash it via ADB. Reboot in recovery and flash the right rom / gapps.

redukt said:
Nope, you can wipe / format your system. Take the N5100 recovery and flash it via ADB. Reboot in recovery and flash the right rom / gapps.
Click to expand...
Click to collapse
you could explain to me step by step how I do it. As I said it is locked on that screen.

They´re so many threads here on XDA with flashinstructions / ADB. Pls use the forum search engine

redukt said:
They´re so many threads here on XDA with flashinstructions / ADB. Pls use the forum search engine
Click to expand...
Click to collapse
friend help me, I am newbie. Tell a method or show me a link

edglaston said:
friend help me, I am newbie. Tell a method or show me a link
Click to expand...
Click to collapse
I put the USB cable and the tablet does not appear on the computer

Well you have to install drivers for your device pls google for it.
And then follow those instructions.
You have to reboot your device in bootloader mode bye volume down, homebutton and power.

Related

Help maybe broke my p6!

Okay so i had my p6 for around 3 months now, and i have rooted it flash quite a lot roms. But 2 weeks ago i flash b506, and it was OK, didn't like the rom, but kinda just, used it. Then today i wanted to install omni rom, i used stock recovery, and now it's stuck on 'huawei ascend' logo. And i can't update to any softare using the power + vol up + vol down. It just comes up with a fail, i can't flash any custom roms. Im pretty, screwed. Please help!
Why open new topic?.......
kabirjedi said:
Why open new topic?.......
Click to expand...
Click to collapse
Because it's very important that i get the phone fixed!
How could you flash Omni with stock recovery? You need TWRP with stock it won't work.
Gesendet von meinem P6-U06
taaeem said:
How could you flash Omni with stock recovery? You need TWRP with stock it won't work.
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
That's the problem dude! I can't do ****, now! I can't flash anything!
kamphoz said:
That's the problem dude! I can't do ****, now! I can't flash anything!
Click to expand...
Click to collapse
Try downloading stock B506 and load onto dload and reinstall it.
If that still doesn't work then try this, but I think you'll need to be in fastboot mode...
EDIT: Just follow instructions on my thread for the TWRP Installer.
Use my tool here to install twrp.
http://forum.xda-developers.com/showthread.php?t=2709607
1. Download my tool.
2. Extract.
3. Open TWRP installer. Make sure your phone is in fastboot mode.
4. Choose option 1. When it asks you which rom you use, choose 3 (skip).
5. Hold down power and vol(+) and vol (-) buttons.
6. Click wipe button in twrp. Wipe system, dalvik cache, data, cust, internal storage. Note: you will lose all your data.
7. Then go back to main menu, choose install.
8. Find your zip you put on your sd card and swipe to install.
9. Reboot and have fun with OMNI rom.
Sent from my P6-U06 using xda app-developers app
kamphoz said:
That's the problem dude! I can't do ****, now! I can't flash anything!
Click to expand...
Click to collapse
Hi !
If you already flashed B506CN, you can flash now stock recovery for B506CN , to be able to flash UPDATE.APP from/dload folder !
Put your device in bootloader mode :
> adb reboot bootloader
or
> please press and keep, at the same time : power and volume down till your device shut-down ! Now , release power button but keep pressing volume down till you see Huawei logo : Huawei Ascend ! - In this moment you are in bootloader mode, and you can flash stock recovery for B506 from here !
Good luck !
surdu_petru said:
Hi !
If you already flashed B506CN, you can flash now stock recovery for B506CN , to be able to flash UPDATE.APP from/dload folder !
Put your device in bootloader mode :
> adb reboot bootloader
or
> please press and keep, at the same time : power and volume down till your device shut-down ! Now , release power button but keep pressing volume down till you see Huawei logo : Huawei Ascend ! - In this moment you are in bootloader mode, and you can flash stock recovery for B506 from here !
Good luck !
Click to expand...
Click to collapse
bokchoi2020 said:
Try downloading stock B506 and load onto dload and reinstall it.
If that still doesn't work then try this, but I think you'll need to be in fastboot mode...
EDIT: Just follow instructions on my thread for the TWRP Installer.
Use my tool here to install twrp.
http://forum.xda-developers.com/showthread.php?t=2709607
1. Download my tool.
2. Extract.
3. Open TWRP installer. Make sure your phone is in fastboot mode.
4. Choose option 1. When it asks you which rom you use, choose 3 (skip).
5. Hold down power and vol(+) and vol (-) buttons.
6. Click wipe button in twrp. Wipe system, dalvik cache, data, cust, internal storage. Note: you will lose all your data.
7. Then go back to main menu, choose install.
8. Find your zip you put on your sd card and swipe to install.
9. Reboot and have fun with OMNI rom.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Thank you both of you! It's great to get so much help! But that's not really the problem. I am, not able to boot into bootloader, as i can't boot the phone, neither can i flash ANY Updates, using the dload, i tryed to flash omni, and pac-man, i also tryed to flash the twrp zip file, but i't won't allow me to flash anything. i will just get signature verification failed. When i use adb devices, i get "?". You guy's think theres any hope?
kamphoz said:
You guy's think theres any hope?
Click to expand...
Click to collapse
Just follow instructions from the link I gave you and you should be fine, or follow surdu's 2nd method.
Sent from my P6-U06 using xda app-developers app
kamphoz said:
Thank you both of you! It's great to get so much help! But that's not really the problem. I am, not able to boot into bootloader, as i can't boot the phone, neither can i flash ANY Updates, using the dload, i tryed to flash omni, and pac-man, i also tryed to flash the twrp zip file, but i't won't allow me to flash anything. i will just get signature verification failed. When i use adb devices, i get "?". You guy's think theres any hope?
Click to expand...
Click to collapse
Then everything is fine I think but by the way you can't never flash a custom ROM with stock recovery you need always TWRP and this you must flash in bootloader mode the ? Are all fine fastboot sees your device so you can flash a recovery.
Gesendet von meinem HUAWEI P6-C00
bokchoi2020 said:
Just follow instructions from the link I gave you and you should be fine, or follow surdu's 2nd method.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
But don't your installer need to have my phone booted?
taaeem said:
Then everything is fine I think but by the way you can't never flash a custom ROM with stock recovery you need always TWRP and this you must flash in bootloader mode the ? Are all fine fastboot sees your device so you can flash a recovery.
Gesendet von meinem HUAWEI P6-C00
Click to expand...
Click to collapse
I know. But i panicked so i just tryed, everything to save my phone really. But adb only shows "?"
kamphoz said:
I know. But i panicked so i just tryed, everything to save my phone really. But adb only shows "?"
Click to expand...
Click to collapse
Only one"?" or many if many it should be okay, if only one I don't know try to flash TWRP when it works good if not nothing is worst than now I would say.
Gesendet von meinem HUAWEI P6-C00
taaeem said:
Only one"?" or many if many it should be okay, if only one I don't know try to flash TWRP when it works good if not nothing is worst than now I would say.
Gesendet von meinem HUAWEI P6-C00
Click to expand...
Click to collapse
Its okay now ^^

Brick the phone! HEEEELP!

Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
mathius89 said:
Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
Click to expand...
Click to collapse
More info please. What ROM you were before and what ROM did you flashed upon that one. What cwm, touch cwm? From now on install TWRP, it's better, safer and more stable.
BeyondTheHorizon said:
More info please. What ROM you were before and what ROM did you flashed upon that one. What cwm, touch cwm? From now on install TWRP, it's better, safer and more stable.
Click to expand...
Click to collapse
Before JB had the factory, and installed the [ROM] Huawei KK_ P6_all in EN (BbN) _based on_repack SLMINSK, restarting the mobile I stay in the Huawei logo.
The recovery is this: http://forum.xda-developers.com/showthread.php?t=2417919.
Next time will install the TWRP but now you do not.
mathius89 said:
Before JB had the factory, and installed the [ROM] Huawei KK_ P6_all in EN (BbN) _based on_repack SLMINSK, restarting the mobile I stay in the Huawei logo.
The recovery is this: http://forum.xda-developers.com/showthread.php?t=2417919.
Next time will install the TWRP but now you do not.
Click to expand...
Click to collapse
It takes more than five minutes for the new ROM to boot. It taked longer ? And also you should follow tutorials in here about flashing ROM's and how/what recovery you should install at the right time during the upgrading process. Especially when you upgrade from JellyBean to KitKat.
BeyondTheHorizon said:
It takes more than five minutes for the new ROM to boot. It taked longer ? And also you should follow tutorials in here about flashing ROM's and how/what recovery you should install at the right time during the upgrading process. Especially when you upgrade from JellyBean to KitKat.
Click to expand...
Click to collapse
I left 30 minutes and never passed the Huawei logo ... No solution?
mathius89 said:
I left 30 minutes and never passed the Huawei logo ... No solution?
Click to expand...
Click to collapse
Well, you must look for a tutorial on how to flash stock recovery and install stock ROM again.
mathius89 said:
Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
Click to expand...
Click to collapse
did you wipe dalvik and cache ? if not try to do this in recovery, most bootloops are caused by this
mathius89 said:
I left 30 minutes and never passed the Huawei logo ... No solution?
Click to expand...
Click to collapse
CWM is not permanent recovery, put the UPDATE. APP in dload FOLDER on SD card and boot phone via 3 buttons.
Next time read thread carefully and use TWRP.
Sent from my HUAWEI P6-U06 using Tapatalk
alex.79 said:
CWM is not permanent recovery, put the UPDATE. APP in dload FOLDER on SD card and boot phone via 3 buttons.
Next time read thread carefully and use TWRP.
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
mathius89 said:
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
Click to expand...
Click to collapse
Official firmware from Huawei. Has a many thread here in XDA.
Sent from my HUAWEI P6-U06 using Tapatalk
mathius89 said:
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
Click to expand...
Click to collapse
You flashed from CWM, that's why you have this problem. Download a ROM that can be flashed by dload method, and that ROM must be a stock ROM. Stock ROM's are not in a flashable zip's format, but they are in a form of an update.app file.
Create a folder in your sdcard and name it dload. In dload folder put the update.app file. After that press volume up + down + power button all at once until you see the HUAWEI logo, after that release those buttons.
For this to work you must have stock recovery.
BeyondTheHorizon said:
You flashed from CWM, that's why you have this problem. Download a ROM that can be flashed by dload method, and that ROM must be a stock ROM. Stock ROM's are not in a flashable zip's format, but they are in a form of an update.app file.
Create a folder in your sdcard and name it dload. In dload folder put the update.app file. After that press volume up + down + power button all at once until you see the HUAWEI logo, after that release those buttons.
For this to work you must have stock recovery.
Click to expand...
Click to collapse
Ok, when I can I will try. Thank you very much!
mathius89 said:
Ok, when I can I will try. Thank you very much!
Click to expand...
Click to collapse
You're welcome. Good luck and enjoy the new firmware.

P8000 How to Reset to Stock

Hello can anyone tell me how to reset the P8000 to Stock? No Rom Works Everything Freeze. I Want to reset the Handy to Stock. Unroot and Remote the Philz
First off you need to make sure you have the drivers installed, there is a great guide on this by sleleton1911 it works on both W 7,8 and 10
http://forum.xda-developers.com/elephone-p8000/help/guide-windows-10-mtk-vcom-usb-drivers-t3264884
Next you need to download the stock rom (latest stock rom below, this is not for the american version)
https://mega.nz/#!ZgR23BYA!IRl9geakWlCOWRgPx2kVhf-ehzV-DbkhaW52stY8FX4
Next you need SPflashtool which will flash the stock filmware
http://d-h.st/w6v
Then go to "step 2" in the post below and follow the instructions step by step. Done your back on stock
http://bbs.elephone.hk/thread-1037-1-1.html#.VthQ9ZyLRdh
Make sure you click "download" on SPfalshtool and your phone is off before connecting it to your computer!
Thanks it Works. But the P8000 Runs sevaral Minutes then it Freezes and then it Reboot. After Reboot there is a Bootloop .
mrchartz said:
Thanks it Works. But the P8000 Runs sevaral Minutes then it Freezes and then it Reboot. After Reboot there is a Bootloop .
Click to expand...
Click to collapse
Hmmm that is very strange @skeleton1911 any ideas mate?
stonedpsycho said:
Hmmm that is very strange @skeleton1911 any ideas mate?
Click to expand...
Click to collapse
mrchartz said:
Hello can anyone tell me how to reset the P8000 to Stock? No Rom Works Everything Freeze. I Want to reset the Handy to Stock. Unroot and Remote the Philz
Click to expand...
Click to collapse
Recovery unroot etc..and all will reset itself. So you only need to flash the stock rom.
(Best is 25/07) flash it via flash tools.
Wish good luck!
P.s: with that i dont think there will be a freeze or bootloop
Gesendet von meinem Elephone P8000 mit Tapatalk
mrchartz said:
Thanks it Works. But the P8000 Runs sevaral Minutes then it Freezes and then it Reboot. After Reboot there is a Bootloop .
Click to expand...
Click to collapse
Here is a link to the 07/25 rom. Thank you @skeleton1911 for your input
https://mega.nz/#!08AUAS6Y!RZTy7Xd46QUjnIAbgjDDOKUGk55s2BHGHzXOR5u8UL8

twrp problem

Hi anyone can help me. Before i restart my device it automatically boots in bootloader mode. I manage to fix it via fastboot command "fastboot oem fb_mode_clear"
But after that my problem now is when i restart my device it boots on twrp recovery. When i reboot system it also goes back to twrp mode. What is this problem? Any fix for this? Thanks everyone.
Kdx10 said:
Hi anyone can help me. Before i restart my device it automatically boots in bootloader mode. I manage to fix it via fastboot command "fastboot oem fb_mode_clear"
But after that my problem now is when i restart my device it boots on twrp recovery. When i reboot system it also goes back to twrp mode. What is this problem? Any fix for this? Thanks everyone.
Click to expand...
Click to collapse
try hold power & -volume when logo appear hold again to buttons for 10 sec then check
hamad94 said:
try hold power & -volume when logo appear hold again to buttons for 10 sec then check
Click to expand...
Click to collapse
Tried it but it wot fix. Anyways thanks for reaching up bro
What version of TWRP are you using?
If you are on the latest one, try the version before.
https://www.androidfilehost.com/?w=files&flid=126925
Jimi Mack said:
What version of TWRP are you using?
If you are on the latest one, try the version before.
https://www.androidfilehost.com/?w=files&flid=126925
Click to expand...
Click to collapse
I have the latest v3.1.1-0
How can i flash the old one?
Edit. Tried it sir but no success :angel:
Kdx10 said:
I have the latest v3.1.1-0
How can i flash the old one?
Edit. Tried it sir but no success :angel:
Click to expand...
Click to collapse
To flash in TWRP you need to flash it as an image, the option is in there. It will allow you to flash an older or newer version when with in TWRP.
Jimi Mack said:
To flash in TWRP you need to flash it as an image, the option is in there. It will allow you to flash an older or newer version when with in TWRP.
Click to expand...
Click to collapse
Yes sir tried it but still not solved. Now i lost my hope in recovering my device :crying:
Kdx10 said:
Yes sir tried it but still not solved. Now i lost my hope in recovering my device :crying:
Click to expand...
Click to collapse
Just to double check, you have a rom installed right, you did not accidentally wipe that?
Jimi Mack said:
Just to double check, you have a rom installed right, you did not accidentally wipe that?
Click to expand...
Click to collapse
Yes sir. I have 4 different roms in my sd card. The aex, xperience, crdroid and aokp. Im in aex rom before everything is smooth no error when restarting. Until then i decided to try the aokp rom 05/21 nightly build, and after that i flash also a modified boot logo to get rid of the unlock bootloader warning iflash it using fastboot commamd but when i power it on and set up the aokp rom everything goes well but then i need to restart my phone then the problem now is appearing. It directly boot in twrp recovery.

Touchscreen not working in TWRP

Im using official TWRP but the touchscreen does not work, how can i get around this?
Try to hold power button for 9-10 seconds
hogze94 said:
Im using official TWRP but the touchscreen does not work, how can i get around this?
Click to expand...
Click to collapse
same here, did you get any solution?
Same to me... help!
lupomarano said:
Same to me... help!
Click to expand...
Click to collapse
what screen do you have?
Sprut_name said:
what screen do you have?
Click to expand...
Click to collapse
I have a MI A2 lite,
reflash twrp .. i had the same issue yesterday ..
Connect the phone to the computer (fastboot mode)
Launch the command line and go to the folder where you put all the prerequisites (cd Folder_name)
Boot the recovery image: fastboot boot twrp-daisy-3.3.0-0-offain.img
You will see the recovery on your phone, prompting to enter the password. Choose "Cancel"
Click to expand...
Click to collapse
solved said:
reflash twrp .. i had the same issue yesterday ..
Click to expand...
Click to collapse
tried it over and over again. still having this issue.
TWRP loads up showing me the "Keep System Read only?" page. Touchscreen wont work.
using twrp-installer-3.3.0-dees_troy-daisy
flash a stock rom , then use offain 3.3.0-0 twrp
I have the same problem, this should help https://forum.xda-developers.com/mi-a2/how-to/guide-flashing-roms-twrp-black-screen-t3913052
Thats because u dont have OS, You need to flash OS with MiFlash, unlock bootloader and flash TWRP

Categories

Resources