Brick the phone! HEEEELP! - Huawei Ascend P6, Mate

Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.

mathius89 said:
Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
Click to expand...
Click to collapse
More info please. What ROM you were before and what ROM did you flashed upon that one. What cwm, touch cwm? From now on install TWRP, it's better, safer and more stable.

BeyondTheHorizon said:
More info please. What ROM you were before and what ROM did you flashed upon that one. What cwm, touch cwm? From now on install TWRP, it's better, safer and more stable.
Click to expand...
Click to collapse
Before JB had the factory, and installed the [ROM] Huawei KK_ P6_all in EN (BbN) _based on_repack SLMINSK, restarting the mobile I stay in the Huawei logo.
The recovery is this: http://forum.xda-developers.com/showthread.php?t=2417919.
Next time will install the TWRP but now you do not.

mathius89 said:
Before JB had the factory, and installed the [ROM] Huawei KK_ P6_all in EN (BbN) _based on_repack SLMINSK, restarting the mobile I stay in the Huawei logo.
The recovery is this: http://forum.xda-developers.com/showthread.php?t=2417919.
Next time will install the TWRP but now you do not.
Click to expand...
Click to collapse
It takes more than five minutes for the new ROM to boot. It taked longer ? And also you should follow tutorials in here about flashing ROM's and how/what recovery you should install at the right time during the upgrading process. Especially when you upgrade from JellyBean to KitKat.

BeyondTheHorizon said:
It takes more than five minutes for the new ROM to boot. It taked longer ? And also you should follow tutorials in here about flashing ROM's and how/what recovery you should install at the right time during the upgrading process. Especially when you upgrade from JellyBean to KitKat.
Click to expand...
Click to collapse
I left 30 minutes and never passed the Huawei logo ... No solution?

mathius89 said:
I left 30 minutes and never passed the Huawei logo ... No solution?
Click to expand...
Click to collapse
Well, you must look for a tutorial on how to flash stock recovery and install stock ROM again.

mathius89 said:
Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
Click to expand...
Click to collapse
did you wipe dalvik and cache ? if not try to do this in recovery, most bootloops are caused by this

mathius89 said:
I left 30 minutes and never passed the Huawei logo ... No solution?
Click to expand...
Click to collapse
CWM is not permanent recovery, put the UPDATE. APP in dload FOLDER on SD card and boot phone via 3 buttons.
Next time read thread carefully and use TWRP.
Sent from my HUAWEI P6-U06 using Tapatalk

alex.79 said:
CWM is not permanent recovery, put the UPDATE. APP in dload FOLDER on SD card and boot phone via 3 buttons.
Next time read thread carefully and use TWRP.
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks

mathius89 said:
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
Click to expand...
Click to collapse
Official firmware from Huawei. Has a many thread here in XDA.
Sent from my HUAWEI P6-U06 using Tapatalk

mathius89 said:
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
Click to expand...
Click to collapse
You flashed from CWM, that's why you have this problem. Download a ROM that can be flashed by dload method, and that ROM must be a stock ROM. Stock ROM's are not in a flashable zip's format, but they are in a form of an update.app file.
Create a folder in your sdcard and name it dload. In dload folder put the update.app file. After that press volume up + down + power button all at once until you see the HUAWEI logo, after that release those buttons.
For this to work you must have stock recovery.

BeyondTheHorizon said:
You flashed from CWM, that's why you have this problem. Download a ROM that can be flashed by dload method, and that ROM must be a stock ROM. Stock ROM's are not in a flashable zip's format, but they are in a form of an update.app file.
Create a folder in your sdcard and name it dload. In dload folder put the update.app file. After that press volume up + down + power button all at once until you see the HUAWEI logo, after that release those buttons.
For this to work you must have stock recovery.
Click to expand...
Click to collapse
Ok, when I can I will try. Thank you very much!

mathius89 said:
Ok, when I can I will try. Thank you very much!
Click to expand...
Click to collapse
You're welcome. Good luck and enjoy the new firmware.

Related

[Q] P6 Clean install

Hi guys.
I need some help. I updated to KK beta. I then tried to revert back to B125. somehow in the process i formatted everything and now i can not load any version of software. I only have the huawei recovery console. it keeps on telling me "installation aborted" when i try and install software.
Please help.
I do not have any software on the phone. what can i do to fix the problem?
Eject you sdcard, put a ROM in it and flash it through recovery. You have recovery right?
i get a installation aborted error when i try and recover. I have tried b111 b118 b120 and b125. same error. Which folder must the data be in? zipped or unzipped?
On the root of the sdcard, as a zip but flashable. Do you have stock or custom recovery? If it's stock put the update.app file in a folder called dload.Extract the update.app, put only that file in dload and press power and volume up/down all at once for a few seconds until it starts updating. Do not put the ZIP, only the file update.app.
tried and still not working. any other suggestions?
Do you have stock, custom or both recoveries?
Only stock revoery. had twrp installed but install the b118 stock recovery software. now im not able to install any software. phone is clean. no OS.
Well if you have stock recovery the update.app method must work. Do not put the zip in dload, only the update.app file. And repeat the 3 button method until it works.
Tried everything. nothing works
Dont connect usb when installing
He's right, unplug your phone while doing all of the above.
not connected via usb. is there any other way? any other roms to try?
Phone is fixed. thanks for the help
mr.f said:
not connected via usb. is there any other way? any other roms to try?
Click to expand...
Click to collapse
With stock recovery, not really.
mr.f said:
Phone is fixed. thanks for the help
Click to expand...
Click to collapse
what went wrong ?
mr.f said:
Phone is fixed. thanks for the help
Click to expand...
Click to collapse
Good.You are welcome.
how did you fix it?
warea said:
what went wrong ?
Click to expand...
Click to collapse
how did u fix it coz my phone has no os now and cant seem to install anything from recovery

Returning to Original Firmware

Hello,
I have tested a ROM, it worked very well, however I want to return to a original firmware. I have the file but How can I installed since everytime I restart my phone it restart on TWRP mode, how can I make my phone recognize the firmware I want to install?
Thanks,
Sennincito said:
Hello,
I have tested a ROM, it worked very well, however I want to return to a original firmware. I have the file but How can I installed since everytime I restart my phone it restart on TWRP mode, how can I make my phone recognize the firmware I want to install?
Thanks,
Click to expand...
Click to collapse
Flash stock recovery through ADB
Sent from my P6-U00 using Tapatalk
what is the best stock firmware ? I mean what version ?
lookfor said:
what is the best stock firmware ? I mean what version ?
Click to expand...
Click to collapse
I would advise B125.
KK Beta is cool, too, but notification-managing apps don't work, and it drains your battery faster
lootjelo said:
I would advise B125.
KK Beta is cool, too, but notification-managing apps don't work, and it drains your battery faster
Click to expand...
Click to collapse
lootjelo,
I have removed the TWRP successfully, however when I try to install firmware B125 it keeps giving me a Fail message.
I have tried updating using configuration->update... etc, and also trying to install it using power+vol up/down method, but keeps me saying Fail.
I have tried B111 and B125, so I believe is not the firmware.
Sennincito said:
lootjelo,
I have removed the TWRP successfully, however when I try to install firmware B125 it keeps giving me a Fail message.
I have tried updating using configuration->update... etc, and also trying to install it using power+vol up/down method, but keeps me saying Fail.
I have tried B111 and B125, so I believe is not the firmware.
Click to expand...
Click to collapse
Move the dload folder to internal storage
Sent from my P6-U06 using Tapatalk
lootjelo said:
Move the dload folder to internal storage
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
It is on internal storage, however, Im trying to install b125 which i guess is jelly bean and I have 4.4.2 kit kat, could this be the problem?
if is not, then I dont know what could be since dload is on internal storage.
Sennincito said:
It is on internal storage, however, Im trying to install b125 which i guess is jelly bean and I have 4.4.2 kit kat, could this be the problem?
if is not, then I dont know what could be since dload is on internal storage.
Click to expand...
Click to collapse
That's definitely not the problem. Try redownloading the update.app
Sent from my P6-U06 using Tapatalk
lootjelo said:
That's definitely not the problem. Try redownloading the update.app
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
I did, actually I've tried two different firmwares, both are giving me the fail error, this is the message on screen:
Checking Module MD5RSA... OK
Checking Module CRC... OK
Checking Module CURVER... OK
Checking Module VERLIST... OK
Huawei SD card update fail........
BUT!!! dload folder its on SD Card
Sennincito said:
I did, actually I've tried two different firmwares, both are giving me the fail error, this is the message on screen:
Checking Module MD5RSA... OK
Checking Module CRC... OK
Checking Module CURVER... OK
Checking Module VERLIST... OK
Huawei SD card update fail........
BUT!!! dload folder its on SD Card
Click to expand...
Click to collapse
It's on your external SD? Like I said, move it to your internal SD.
Sent from my P6-U06 using Tapatalk
lootjelo said:
It's on your external SD? Like I said, move it to your internal SD.
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
Sorry, I meant its on Internal SD, actually its also on External SD as my back up.
Sennincito said:
Sorry, I meant its on Internal SD, actually its also on External SD as my back up.
Click to expand...
Click to collapse
That could be your problem. Rename the dload folder on your external sd to whatever you'd like. Just make sure there's only one dload folder.
Sent from my P6-U06 using Tapatalk
lootjelo said:
That could be your problem. Rename the dload folder on your external sd to whatever you'd like. Just make sure there's only one dload folder.
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
I have removed my external copy and I left only my internal copy, the result is the same... FAIL
Actually I think that you need to return to stock recovery and then use the update.app.
To do that you must be familiar with adb and then follow the instructions given at the [INDEX] Club Huawei Meets XDA [ News / Leaks / Mods / ROMS ] .
As it states:
Download Stock_Recovery_B118.zip
Put your device in fastboot mode ( > adb reboot bootloader )
Flash recovery via fastboot ( fastboot flash recovery recovery.img )
Reboot via fastboot ( fastboot reboot )
If you need more help regarding the above procedure read very very carefully this and follow the given steps.
In any case you must bare in mind that since you have KK rom you have changed your recovery and probably this is the reason you cant go back to an original firmware by simple using the update.app.
Good luck
halman said:
Actually I think that you need to return to stock recovery and then use the update.app.
To do that you must be familiar with adb and then follow the instructions given at the [INDEX] Club Huawei Meets XDA [ News / Leaks / Mods / ROMS ] .
As it states:
Download Stock_Recovery_B118.zip
Put your device in fastboot mode ( > adb reboot bootloader )
Flash recovery via fastboot ( fastboot flash recovery recovery.img )
Reboot via fastboot ( fastboot reboot )
If you need more help regarding the above procedure read very very carefully this and follow the given steps.
In any case you must bare in mind that since you have KK rom you have changed your recovery and probably this is the reason you cant go back to an original firmware by simple using the update.app.
Good luck
Click to expand...
Click to collapse
Thank you halman, I did flash the recovery.img, however again FAIL.
Sennincito said:
Thank you halman, I did flash the recovery.img, however again FAIL.
Click to expand...
Click to collapse
Hmm, that's odd..
Just to make things clear
1. What rom you used before?
2. What recovery are you on now (stock, TWRP, CWM) ?
Also try this. If you have made a nandroid backup before you may follow the instructions in this post from surdu to put TWRP in your p6 and restore it.
halman said:
Hmm, that's odd..
Just to make things clear
1. What rom you used before?
2. What recovery are you on now (stock, TWRP, CWM) ?
Also try this. If you have made a nandroid backup before you may follow the instructions in this post from surdu to put TWRP in your p6 and restore it.
Click to expand...
Click to collapse
I am in ROM HYD52ROM_V7
I have removed TWRP and using Stock (i guess), the normal recovery.
Sennincito said:
I am in ROM HYD52ROM_V7
I have removed TWRP and using Stock (i guess), the normal recovery.
Click to expand...
Click to collapse
Can you check it? Power off and then power on your phone while holding only the volume up (+) button. If it is stock then you shoud see the 3e recovery (if I remember correctly). If not then you haven't the stock recovery.
One more thing. Your phone works ok? I mean that it boots and the it works as it should? Because if you change the recovery, then you probably should have a bootloop with the HYD52ROM_V7 (just a guess, not sure)
halman said:
Can you check it? Power off and then power on your phone while holding only the volume up (+) button. If it is stock then you shoud see the 3e recovery (if I remember correctly). If not then you haven't the stock recovery.
One more thing. Your phone works ok? I mean that it boots and the it works as it should? Because if you change the recovery, then you probably should have a bootloop with the HYD52ROM_V7 (just a guess, not sure)
Click to expand...
Click to collapse
It does says 3e recovery.
My phone works very well, I have no problems rebooting, calling, etc, however I´ve noticed I have connectivity issues, I can send mails, photos, MMS, SMS, BUT i cannot receive any photo or open any webpage (only using WiFi), so I want to return to the original firmware.
Sennincito said:
It does says 3e recovery.
My phone works very well, I have no problems rebooting, calling, etc, however I´ve noticed I have connectivity issues, I can send mails, photos, MMS, SMS, BUT i cannot receive any photo or open any webpage (only using WiFi), so I want to return to the original firmware.
Click to expand...
Click to collapse
I am sorry but I ran out of ideas..since you have stock recovery it should work.
If you dont have a nandroid backup I really dont know any other method to tell you besides the update.app.

Help maybe broke my p6!

Okay so i had my p6 for around 3 months now, and i have rooted it flash quite a lot roms. But 2 weeks ago i flash b506, and it was OK, didn't like the rom, but kinda just, used it. Then today i wanted to install omni rom, i used stock recovery, and now it's stuck on 'huawei ascend' logo. And i can't update to any softare using the power + vol up + vol down. It just comes up with a fail, i can't flash any custom roms. Im pretty, screwed. Please help!
Why open new topic?.......
kabirjedi said:
Why open new topic?.......
Click to expand...
Click to collapse
Because it's very important that i get the phone fixed!
How could you flash Omni with stock recovery? You need TWRP with stock it won't work.
Gesendet von meinem P6-U06
taaeem said:
How could you flash Omni with stock recovery? You need TWRP with stock it won't work.
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
That's the problem dude! I can't do ****, now! I can't flash anything!
kamphoz said:
That's the problem dude! I can't do ****, now! I can't flash anything!
Click to expand...
Click to collapse
Try downloading stock B506 and load onto dload and reinstall it.
If that still doesn't work then try this, but I think you'll need to be in fastboot mode...
EDIT: Just follow instructions on my thread for the TWRP Installer.
Use my tool here to install twrp.
http://forum.xda-developers.com/showthread.php?t=2709607
1. Download my tool.
2. Extract.
3. Open TWRP installer. Make sure your phone is in fastboot mode.
4. Choose option 1. When it asks you which rom you use, choose 3 (skip).
5. Hold down power and vol(+) and vol (-) buttons.
6. Click wipe button in twrp. Wipe system, dalvik cache, data, cust, internal storage. Note: you will lose all your data.
7. Then go back to main menu, choose install.
8. Find your zip you put on your sd card and swipe to install.
9. Reboot and have fun with OMNI rom.
Sent from my P6-U06 using xda app-developers app
kamphoz said:
That's the problem dude! I can't do ****, now! I can't flash anything!
Click to expand...
Click to collapse
Hi !
If you already flashed B506CN, you can flash now stock recovery for B506CN , to be able to flash UPDATE.APP from/dload folder !
Put your device in bootloader mode :
> adb reboot bootloader
or
> please press and keep, at the same time : power and volume down till your device shut-down ! Now , release power button but keep pressing volume down till you see Huawei logo : Huawei Ascend ! - In this moment you are in bootloader mode, and you can flash stock recovery for B506 from here !
Good luck !
surdu_petru said:
Hi !
If you already flashed B506CN, you can flash now stock recovery for B506CN , to be able to flash UPDATE.APP from/dload folder !
Put your device in bootloader mode :
> adb reboot bootloader
or
> please press and keep, at the same time : power and volume down till your device shut-down ! Now , release power button but keep pressing volume down till you see Huawei logo : Huawei Ascend ! - In this moment you are in bootloader mode, and you can flash stock recovery for B506 from here !
Good luck !
Click to expand...
Click to collapse
bokchoi2020 said:
Try downloading stock B506 and load onto dload and reinstall it.
If that still doesn't work then try this, but I think you'll need to be in fastboot mode...
EDIT: Just follow instructions on my thread for the TWRP Installer.
Use my tool here to install twrp.
http://forum.xda-developers.com/showthread.php?t=2709607
1. Download my tool.
2. Extract.
3. Open TWRP installer. Make sure your phone is in fastboot mode.
4. Choose option 1. When it asks you which rom you use, choose 3 (skip).
5. Hold down power and vol(+) and vol (-) buttons.
6. Click wipe button in twrp. Wipe system, dalvik cache, data, cust, internal storage. Note: you will lose all your data.
7. Then go back to main menu, choose install.
8. Find your zip you put on your sd card and swipe to install.
9. Reboot and have fun with OMNI rom.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Thank you both of you! It's great to get so much help! But that's not really the problem. I am, not able to boot into bootloader, as i can't boot the phone, neither can i flash ANY Updates, using the dload, i tryed to flash omni, and pac-man, i also tryed to flash the twrp zip file, but i't won't allow me to flash anything. i will just get signature verification failed. When i use adb devices, i get "?". You guy's think theres any hope?
kamphoz said:
You guy's think theres any hope?
Click to expand...
Click to collapse
Just follow instructions from the link I gave you and you should be fine, or follow surdu's 2nd method.
Sent from my P6-U06 using xda app-developers app
kamphoz said:
Thank you both of you! It's great to get so much help! But that's not really the problem. I am, not able to boot into bootloader, as i can't boot the phone, neither can i flash ANY Updates, using the dload, i tryed to flash omni, and pac-man, i also tryed to flash the twrp zip file, but i't won't allow me to flash anything. i will just get signature verification failed. When i use adb devices, i get "?". You guy's think theres any hope?
Click to expand...
Click to collapse
Then everything is fine I think but by the way you can't never flash a custom ROM with stock recovery you need always TWRP and this you must flash in bootloader mode the ? Are all fine fastboot sees your device so you can flash a recovery.
Gesendet von meinem HUAWEI P6-C00
bokchoi2020 said:
Just follow instructions from the link I gave you and you should be fine, or follow surdu's 2nd method.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
But don't your installer need to have my phone booted?
taaeem said:
Then everything is fine I think but by the way you can't never flash a custom ROM with stock recovery you need always TWRP and this you must flash in bootloader mode the ? Are all fine fastboot sees your device so you can flash a recovery.
Gesendet von meinem HUAWEI P6-C00
Click to expand...
Click to collapse
I know. But i panicked so i just tryed, everything to save my phone really. But adb only shows "?"
kamphoz said:
I know. But i panicked so i just tryed, everything to save my phone really. But adb only shows "?"
Click to expand...
Click to collapse
Only one"?" or many if many it should be okay, if only one I don't know try to flash TWRP when it works good if not nothing is worst than now I would say.
Gesendet von meinem HUAWEI P6-C00
taaeem said:
Only one"?" or many if many it should be okay, if only one I don't know try to flash TWRP when it works good if not nothing is worst than now I would say.
Gesendet von meinem HUAWEI P6-C00
Click to expand...
Click to collapse
Its okay now ^^

[Recovery] for Lenovo A850+ Carliv 2.2 touch base cwm 6.0.4.4

Ported carliv 2.2 for lenovo A850+
Flash with mobileuncle mtk tool
Bug : wipe cache to slow
Download :
http://www65.zippyshare.com/v/85199017/file.html
Or
https://mega.co.nz/#!VE10zTZI!QJbvZnEBLEMGoBga1zRoqJaCZ3XnLwdnbmP6mZ-R5kM
Reserve
Hi.
Now i try it,but not worked unfortunately.Again i have the Chinese recovery.....why?
kostast1 said:
Hi.
Now i try it,but not worked unfortunately.Again i have the Chinese recovery.....why?
Click to expand...
Click to collapse
U cant flash it or it cant go to recovery?
Seems like ur flashing not successful.. U use mobileuncle?
jayXzMx said:
U cant flash it or it cant go to recovery?
Seems like ur flashing not successful.. U use mobileuncle?
Click to expand...
Click to collapse
Yes i flash it with mobileuncle but nothing.....again Chinese recovery...
kostast1 said:
Yes i flash it with mobileuncle but nothing.....again Chinese recovery...
Click to expand...
Click to collapse
If ur mobileuncle have root access suppost it can be done. Try rename to recovery.img then reflash again or use flash tool to flash it..
jayXzMx said:
If ur mobileuncle have root access suppost it can be done. Try rename to recovery.img then reflash again or use flash tool to flash it..
Click to expand...
Click to collapse
Hi,yes mobileuncle have root access,rename???give me an example pls.
kostast1 said:
Hi,yes mobileuncle have root access,rename???give me an example pls.
Click to expand...
Click to collapse
I will let u know again later.. I redo back.. As mine should be no problem.. Have 3 times flashing with no issue.
jayXzMx said:
I will let u know again later.. I redo back.. As mine should be no problem.. Have 3 times flashing with no issue.
Click to expand...
Click to collapse
So i expect a reply from you,tnx.
kostast1 said:
So i expect a reply from you,tnx.
Click to expand...
Click to collapse
Kostast bro.. Try the other link ive update.
jayXzMx said:
Kostast bro.. Try the other link ive update.
Click to expand...
Click to collapse
Ok,i do that now.
All is ok now whit new link!!!!!!!
kostast1 said:
Ok,i do that now.
All is ok now whit new link!!!!!!!
Click to expand...
Click to collapse
Is it ok now bro?
jayXzMx said:
Is it ok now bro?
Click to expand...
Click to collapse
Yes great job!!!Tnx again!!!!
not chineese recovery
kostast1 said:
Yes i flash it with mobileuncle but nothing.....again Chinese recovery...
Click to expand...
Click to collapse
i guess what you're seeing is not a full recovery but a prerecovery test menu, the same as for me. The cwm is there, i am able to acces it through android with restart to recovery function.
cristi2442978 said:
i guess what you're seeing is not a full recovery but a prerecovery test menu, the same as for me. The cwm is there, i am able to acces it through android with restart to recovery function.
Click to expand...
Click to collapse
i dont get u?? meaning your phone come with precwm?
yes. it has a Chinese language menu that comes up when i press vol up and Power button. i can acces the regular cwm only through restart to recovery menu from within android
Sent from my Lenovo A850+ using Tapatalk
Hello guys
Well i have just received my phone yesterday and im back on the modding part.
Sooo happy that there are people out there already developing for this phone.
Problem is, i downloaded the recovery, from both links, tried to flash it with mobiluncle tools, it took 2 seconds, maybe its to fast and its not really flashing??
rebooted to recovery and i can only see 2 lenovo logos overlapping and in the lower screen text saying Recovery mode.
It hangs a few seconds and then reboots normally. but no recovery.
Then tried to flash with flashtool. same story.
i could never access the original recovery anyway, it just said no command.
all information on the phone or other apps says unknown recovery, is this normal when its a stock recovery?
Any other ideas? need help, this phone is awesome so far, except for the internal memory, its too small and i have all of the phone memory doing nothing, i have my sd card, but i wanted to mod it in the first place to make the internal memory partition bigger.
Anyway this is not the thread to talk bout that, but any help with flashing this recovery?
Much appreciated.
onbsecret said:
Well i have just received my phone yesterday and im back on the modding part.
Sooo happy that there are people out there already developing for this phone.
Problem is, i downloaded the recovery, from both links, tried to flash it with mobiluncle tools, it took 2 seconds, maybe its to fast and its not really flashing??
rebooted to recovery and i can only see 2 lenovo logos overlapping and in the lower screen text saying Recovery mode.
It hangs a few seconds and then reboots normally. but no recovery.
Then tried to flash with flashtool. same story.
i could never access the original recovery anyway, it just said no command.
all information on the phone or other apps says unknown recovery, is this normal when its a stock recovery?
Any other ideas? need help, this phone is awesome so far, except for the internal memory, its too small and i have all of the phone memory doing nothing, i have my sd card, but i wanted to mod it in the first place to make the internal memory partition bigger.
Anyway this is not the thread to talk bout that, but any help with flashing this recovery?
Much appreciated.
Click to expand...
Click to collapse
hi.. if the recovery file name to long just replace it as recovery.img.. make sure ur mobileuncle grant root. it should be fine.. as many user can flash it..
there is 2 model out there.. A850p and a850i.. make sure its a850p because its not for a850i.
Works
jayXzMx said:
hi.. if the recovery file name to long just replace it as recovery.img.. make sure ur mobileuncle grant root. it should be fine.. as many user can flash it..
there is 2 model out there.. A850p and a850i.. make sure its a850p because its not for a850i.
Click to expand...
Click to collapse
I Use lenovo a850+ and works nice! Thanks JayXzMx.
done

[Q] Buggy CM11 flash, now can't flash any other zip on twrp. What do I do?

So I bought this phone from a friend while I'm in china to use. It was running stock huawei JB when I got it and obviously it was less than stellar. So I rooted it, flashed the TWRP recovery and went on to flash CM11. I might have made a mistake doing that since I flashed from JB. Now my phone has a slew of problems such as it won't detect my sim, my computer doesn't detect it as a USB device anymore so I can't put any files on it; and there's no reboot menu at all; holding the power button just makes the screen a bit dark and that's it.
So I downloaded the emui KK file hoping to flash it but I can't flash that either. On TWRP trying to flash anything fails...unless it's the CM11 zip, which again leads to the same buggy results. I am at a loss here, what can I do to get it back to stock?
rxsahara said:
So I bought this phone from a friend while I'm in china to use. It was running stock huawei JB when I got it and obviously it was less than stellar. So I rooted it, flashed the TWRP recovery and went on to flash CM11. I might have made a mistake doing that since I flashed from JB. Now my phone has a slew of problems such as it won't detect my sim, my computer doesn't detect it as a USB device anymore so I can't put any files on it; and there's no reboot menu at all; holding the power button just makes the screen a bit dark and that's it.
So I downloaded the emui KK file hoping to flash it but I can't flash that either. On TWRP trying to flash anything fails...unless it's the CM11 zip, which again leads to the same buggy results. I am at a loss here, what can I do to get it back to stock?
Click to expand...
Click to collapse
If you have root then maybe theres hope.
Sent from my SM-G850F
tileeq said:
If you have root then maybe theres hope.
Sent from my SM-G850F
Click to expand...
Click to collapse
Still have root, and still have recovery (which again fails to flash anything else BUT the same Cm11)
What to do?
rxsahara said:
Still have root, and still have recovery (which again fails to flash anything else BUT the same Cm11)
What to do?
Click to expand...
Click to collapse
Download an app called rashr. It can flash recovery and boot img files. You can flash a stock with it and try to install stock rom with update.app method.
Sent from my SM-G850F
tileeq said:
Download an app called rashr. It can flash recovery and boot img files. You can flash a stock with it and try to install stock rom with update.app method.
Sent from my SM-G850F
Click to expand...
Click to collapse
Ok, once I have flashed stock recovery and the boot img. How would I go about flashing the update.app?
rxsahara said:
Ok, once I have flashed stock recovery and the boot img. How would I go about flashing the update.app?
Click to expand...
Click to collapse
Download the update.app from huawei (B512 is my suggestion).
http://dl.huaweinews.com/Roms/Ascend-P6/B512.zip
Unpack it and make sure its in a folder called dload on the root of the sdcard or internal storage.
Sent from my SM-G850F
Alright, downloading it now. Because I'm in china this is going to take a good 6 or 7 hours or so haha. What should I do after that?
tileeq said:
Download an app called rashr. It can flash recovery and boot img files. You can flash a stock with it and try to install stock rom with update.app method.
Sent from my SM-G850F
Click to expand...
Click to collapse
Also, where do I find the recovery and boot img files?
rxsahara said:
Also, where do I find the recovery and boot img files?
Click to expand...
Click to collapse
You can get them from the update.app file with the extractor.
http://forum.xda-developers.com/attachment.php?attachmentid=2630242&d=1394800571
Sent from my SM-G850F

Categories

Resources