P8000 How to Reset to Stock - Elephone P8000

Hello can anyone tell me how to reset the P8000 to Stock? No Rom Works Everything Freeze. I Want to reset the Handy to Stock. Unroot and Remote the Philz

First off you need to make sure you have the drivers installed, there is a great guide on this by sleleton1911 it works on both W 7,8 and 10
http://forum.xda-developers.com/elephone-p8000/help/guide-windows-10-mtk-vcom-usb-drivers-t3264884
Next you need to download the stock rom (latest stock rom below, this is not for the american version)
https://mega.nz/#!ZgR23BYA!IRl9geakWlCOWRgPx2kVhf-ehzV-DbkhaW52stY8FX4
Next you need SPflashtool which will flash the stock filmware
http://d-h.st/w6v
Then go to "step 2" in the post below and follow the instructions step by step. Done your back on stock
http://bbs.elephone.hk/thread-1037-1-1.html#.VthQ9ZyLRdh
Make sure you click "download" on SPfalshtool and your phone is off before connecting it to your computer!

Thanks it Works. But the P8000 Runs sevaral Minutes then it Freezes and then it Reboot. After Reboot there is a Bootloop .

mrchartz said:
Thanks it Works. But the P8000 Runs sevaral Minutes then it Freezes and then it Reboot. After Reboot there is a Bootloop .
Click to expand...
Click to collapse
Hmmm that is very strange @skeleton1911 any ideas mate?

stonedpsycho said:
Hmmm that is very strange @skeleton1911 any ideas mate?
Click to expand...
Click to collapse
mrchartz said:
Hello can anyone tell me how to reset the P8000 to Stock? No Rom Works Everything Freeze. I Want to reset the Handy to Stock. Unroot and Remote the Philz
Click to expand...
Click to collapse
Recovery unroot etc..and all will reset itself. So you only need to flash the stock rom.
(Best is 25/07) flash it via flash tools.
Wish good luck!
P.s: with that i dont think there will be a freeze or bootloop
Gesendet von meinem Elephone P8000 mit Tapatalk

mrchartz said:
Thanks it Works. But the P8000 Runs sevaral Minutes then it Freezes and then it Reboot. After Reboot there is a Bootloop .
Click to expand...
Click to collapse
Here is a link to the 07/25 rom. Thank you @skeleton1911 for your input
https://mega.nz/#!08AUAS6Y!RZTy7Xd46QUjnIAbgjDDOKUGk55s2BHGHzXOR5u8UL8

Related

[MOD][I9505XXUEMK8 / MKE][UPDATE] 4 in 1 Extended Power Menu

hey all
as some requested me by PM here is the new updated MK8 / MKE 4 in 1 extended power menu for DeOdexed stock roms :fingers-crossed:
Flashing instructions:
1: Install Any Custom Recovery (tested on PhilZ Recovery)
1: Place the ZIP on Internal/External SD
2: Reboot into Recovery
3: Flash ZIP
4: Reboot
Known issues
Q: If the hot reboot ain't working. Where's the problem?
A: Hot reboot uses command "pkill", so you need to have symlinked that command to the busybox binary
or install busybox manually if your Rom doesn't contain a busybox installation.
Click to expand...
Click to collapse
download: MK8 / MKE 4 in 1 Extended Power Menu
Hi, Friend. Thanks for it effort. I tryied to flash it but instalation aborted. Any suggest? Thanks in advance.
radiobicho said:
Hi, Friend. Thanks for it effort. I tryied to flash it but instalation aborted. Any suggest? Thanks in advance.
Click to expand...
Click to collapse
hmm, it works with PhilZ Recovery and MK8 Pre-root stock rom
edit:weird!! but the files had gotten corrupted i will upload them again
radiobicho said:
Hi, Friend. Thanks for it effort. I tryied to flash it but instalation aborted. Any suggest? Thanks in advance.
Click to expand...
Click to collapse
i re-uploaded the files, try it again
thx. works like a charm on stock MK8. :good:
bruzski said:
i re-uploaded the files, try it again
Click to expand...
Click to collapse
Thanks, friend. Its working now.
nice job man!!!! :good:
well done mate keep up the good work and if the hot reboot doesnt work why not remove it and make a 3 way reboot instead
Repulsa said:
well done mate keep up the good work and if the hot reboot doesnt work why not remove it and make a 3 way reboot instead
Click to expand...
Click to collapse
+1
Sent from my GT-I9505 using XDA Premium 4 mobile app
Flashed without any problem using PhilipZ. But, the 4-in-1 power menu is not available when I power-off my device. I'm on MK8 firmware. What went wrong?
greeny2010 said:
Flashed without any problem using PhilipZ. But, the 4-in-1 power menu is not available when I power-off my device. I'm on MK8 firmware. What went wrong?
Click to expand...
Click to collapse
hi greeny,
It works perfect on MK8 deodexed stock roms, also hot boot works perfect as long as your rom includes busybox, if not just install busybox free from google play store
Send from my iPad Air with Tapatalk
Hy.
It did not works for me. Pre-Rooted MK8 and installed busybox and PhilZ recovery. Everything is the lastest version.
I re-installed this package 3x times but still nothing. I push the power button and there's no more option just like before.
So what is the problem?
Lewis0214 said:
Hy.
It did not works for me. Pre-Rooted MK8 and installed busybox and PhilZ recovery. Everything is the lastest version.
I re-installed this package 3x times but still nothing. I push the power button and there's no more option just like before.
So what is the problem?
Click to expand...
Click to collapse
You have to hit the "restart" button to see the 4 options.
°°° tapatalked °°°
phil.o said:
You have to hit the "restart" button to see the 4 options.
°°° tapatalked °°°
Click to expand...
Click to collapse
I hit but nothing happened. Just the text shows up:
"The device will restart"
And if I hit the OK button it is restart without any kind of option.
Please help!
I tried everything but it did not work.
I hit the restart button but nothing.
I9505 XXUEMK8 Pre-Rooted STOCK ROM's by DjeMBeY + busybox ,
still not working ! any idea ?
Hi Guys,
Is there a way to make it work on odex MK9 ?
Thanks in advance,
update:
confirmed working on my rooted deodexed MKE Rom:fingers-crossed:
I installed MKE Pre-Rooted ROM by DjeMBeY and lastest busybox.
Installed this mode via PhilZ Recovery 6.01.
Still not working! What is the problem?
It is compatible to MKF, please ?

Help maybe broke my p6!

Okay so i had my p6 for around 3 months now, and i have rooted it flash quite a lot roms. But 2 weeks ago i flash b506, and it was OK, didn't like the rom, but kinda just, used it. Then today i wanted to install omni rom, i used stock recovery, and now it's stuck on 'huawei ascend' logo. And i can't update to any softare using the power + vol up + vol down. It just comes up with a fail, i can't flash any custom roms. Im pretty, screwed. Please help!
Why open new topic?.......
kabirjedi said:
Why open new topic?.......
Click to expand...
Click to collapse
Because it's very important that i get the phone fixed!
How could you flash Omni with stock recovery? You need TWRP with stock it won't work.
Gesendet von meinem P6-U06
taaeem said:
How could you flash Omni with stock recovery? You need TWRP with stock it won't work.
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
That's the problem dude! I can't do ****, now! I can't flash anything!
kamphoz said:
That's the problem dude! I can't do ****, now! I can't flash anything!
Click to expand...
Click to collapse
Try downloading stock B506 and load onto dload and reinstall it.
If that still doesn't work then try this, but I think you'll need to be in fastboot mode...
EDIT: Just follow instructions on my thread for the TWRP Installer.
Use my tool here to install twrp.
http://forum.xda-developers.com/showthread.php?t=2709607
1. Download my tool.
2. Extract.
3. Open TWRP installer. Make sure your phone is in fastboot mode.
4. Choose option 1. When it asks you which rom you use, choose 3 (skip).
5. Hold down power and vol(+) and vol (-) buttons.
6. Click wipe button in twrp. Wipe system, dalvik cache, data, cust, internal storage. Note: you will lose all your data.
7. Then go back to main menu, choose install.
8. Find your zip you put on your sd card and swipe to install.
9. Reboot and have fun with OMNI rom.
Sent from my P6-U06 using xda app-developers app
kamphoz said:
That's the problem dude! I can't do ****, now! I can't flash anything!
Click to expand...
Click to collapse
Hi !
If you already flashed B506CN, you can flash now stock recovery for B506CN , to be able to flash UPDATE.APP from/dload folder !
Put your device in bootloader mode :
> adb reboot bootloader
or
> please press and keep, at the same time : power and volume down till your device shut-down ! Now , release power button but keep pressing volume down till you see Huawei logo : Huawei Ascend ! - In this moment you are in bootloader mode, and you can flash stock recovery for B506 from here !
Good luck !
surdu_petru said:
Hi !
If you already flashed B506CN, you can flash now stock recovery for B506CN , to be able to flash UPDATE.APP from/dload folder !
Put your device in bootloader mode :
> adb reboot bootloader
or
> please press and keep, at the same time : power and volume down till your device shut-down ! Now , release power button but keep pressing volume down till you see Huawei logo : Huawei Ascend ! - In this moment you are in bootloader mode, and you can flash stock recovery for B506 from here !
Good luck !
Click to expand...
Click to collapse
bokchoi2020 said:
Try downloading stock B506 and load onto dload and reinstall it.
If that still doesn't work then try this, but I think you'll need to be in fastboot mode...
EDIT: Just follow instructions on my thread for the TWRP Installer.
Use my tool here to install twrp.
http://forum.xda-developers.com/showthread.php?t=2709607
1. Download my tool.
2. Extract.
3. Open TWRP installer. Make sure your phone is in fastboot mode.
4. Choose option 1. When it asks you which rom you use, choose 3 (skip).
5. Hold down power and vol(+) and vol (-) buttons.
6. Click wipe button in twrp. Wipe system, dalvik cache, data, cust, internal storage. Note: you will lose all your data.
7. Then go back to main menu, choose install.
8. Find your zip you put on your sd card and swipe to install.
9. Reboot and have fun with OMNI rom.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Thank you both of you! It's great to get so much help! But that's not really the problem. I am, not able to boot into bootloader, as i can't boot the phone, neither can i flash ANY Updates, using the dload, i tryed to flash omni, and pac-man, i also tryed to flash the twrp zip file, but i't won't allow me to flash anything. i will just get signature verification failed. When i use adb devices, i get "?". You guy's think theres any hope?
kamphoz said:
You guy's think theres any hope?
Click to expand...
Click to collapse
Just follow instructions from the link I gave you and you should be fine, or follow surdu's 2nd method.
Sent from my P6-U06 using xda app-developers app
kamphoz said:
Thank you both of you! It's great to get so much help! But that's not really the problem. I am, not able to boot into bootloader, as i can't boot the phone, neither can i flash ANY Updates, using the dload, i tryed to flash omni, and pac-man, i also tryed to flash the twrp zip file, but i't won't allow me to flash anything. i will just get signature verification failed. When i use adb devices, i get "?". You guy's think theres any hope?
Click to expand...
Click to collapse
Then everything is fine I think but by the way you can't never flash a custom ROM with stock recovery you need always TWRP and this you must flash in bootloader mode the ? Are all fine fastboot sees your device so you can flash a recovery.
Gesendet von meinem HUAWEI P6-C00
bokchoi2020 said:
Just follow instructions from the link I gave you and you should be fine, or follow surdu's 2nd method.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
But don't your installer need to have my phone booted?
taaeem said:
Then everything is fine I think but by the way you can't never flash a custom ROM with stock recovery you need always TWRP and this you must flash in bootloader mode the ? Are all fine fastboot sees your device so you can flash a recovery.
Gesendet von meinem HUAWEI P6-C00
Click to expand...
Click to collapse
I know. But i panicked so i just tryed, everything to save my phone really. But adb only shows "?"
kamphoz said:
I know. But i panicked so i just tryed, everything to save my phone really. But adb only shows "?"
Click to expand...
Click to collapse
Only one"?" or many if many it should be okay, if only one I don't know try to flash TWRP when it works good if not nothing is worst than now I would say.
Gesendet von meinem HUAWEI P6-C00
taaeem said:
Only one"?" or many if many it should be okay, if only one I don't know try to flash TWRP when it works good if not nothing is worst than now I would say.
Gesendet von meinem HUAWEI P6-C00
Click to expand...
Click to collapse
Its okay now ^^

HTC ONE M8 doesn´t Start up Stuck at the HTC Logo

Hello,
i am new in this Forum an i have a Problem, maybe somone can help me.
I habe the new HTC One M8. I wanted to debrand it, so i unlocked the bootloader and loaded philz touch 6 on it. Super SU was also installed. Then i tried the S-OFF variant with Firewater. Firewater said that in Moment ist not possible to use it on my device. So i decided to remove Root.
Super SU was erased, then i went into philz touch and made a factory reset including Cache/dalvik Cache erasing.
Philz Touch asked me before rebooting if i will install a new Rom. I said yes. I think it was the wrong decision.
From now on i can Access Philz touch, but the phone will not start up it stucks on the htc Logo.
Please can somebody help me?
Thank you
You did the factory reset but didn't flashed another Rom or nandroid backup afterwards? a big LOL ...if you do that factory reset in recovery you won't have any rom on it so don't wonder about that if you can't boot the device xD
Gesendet von meinem HTC One_M8 mit Tapatalk
Ok, so it´s my fault, but can you tell me how i can fix that? I think i will Need the stock Rom?
Restore a nandroid if you made one or go to this thread. http://forum.xda-developers.com/showthread.php?t=2701376 and download one that matches your cid.
Thanks, but i cannot find this cid x.xx.112.x - T-Mobile AT (Austria), hope somobedy will be able to upload it.
In that time I would advise to use a custom Rom if you don't care atm about updates from HTC especially if there is nothing special to update like hboot etc and all custom roms are based in latest update
Gesendet von meinem HTC One_M8 mit Tapatalk
One-M8-Master said:
In that time I would advise to use a custom Rom if you don't care atm about updates from HTC especially if there is nothing special to update like hboot etc and all custom roms are based in latest update
Gesendet von meinem HTC One_M8 mit Tapatalk
Click to expand...
Click to collapse
i have the same problem as op but my question is can we use a custom rom if the device is s-off?
After several trys to install viperonem8 i just got a successfull Flash. But now, the phone only boots into recovery mode itself, how can i make it to start up with viperonem8? i used twrp to Flash. Everytime i say reboot System, ist starts up into fastboot!!
Joelz37 said:
i have the same problem as op but my question is can we use a custom rom if the device is s-off?
Click to expand...
Click to collapse
Öhm especially with s-off it should work lol
Huliman said:
After several trys to install viperonem8 i just got a successfull Flash. But now, the phone only boots into recovery mode itself, how can i make it to start up with viperonem8? i used twrp to Flash. Everytime i say reboot System, ist starts up into fastboot!!
Click to expand...
Click to collapse
Recovery wipe cache and dalvik cache and fastboot erase cache...should help
Gesendet von meinem HTC One_M8 mit Tapatalk
have the same problem as OP does , stuck on the HTC boost logo , the a custom rom (viper and revolution HD) on my SD card but when trying to flash either one it just reboot into recovery right after few secs in the install.
Any idea`s?
Device is : M8 Verizon (S-off)
Thanks
edit : in the TWRP i allways get the msg : E: unable to mount /sysem.
My HTC ONE M8 is running again, What solved my Problem? i have unpacked the viperOneM8 zip and flashed the boot.img afterwards. Now it works like it should. Now i am gonna look for the stock Rom to unroot it and restore to stock.
Oooo.. Same as hox?? S-on requires manual flashing of the kerner it seems???
Sent from my HTC One_M8 using xda app-developers app
The only Thing what is not working is LTE. i can enter the LTE Network but i have no Internet Connection, cannot make calls or send/receive sms.
Cdma or gsm phone?
Sent from my HTC One_M8 using xda app-developers app
Network mode is now set on GSM/WCDMA/UMTS, if i Change it to LTE/CDMA the LTE Icon appears in the Status bar, but no Connection.
Huliman said:
My HTC ONE M8 is running again, What solved my Problem? i have unpacked the viperOneM8 zip and flashed the boot.img afterwards. Now it works like it should. Now i am gonna look for the stock Rom to unroot it and restore to stock.
Click to expand...
Click to collapse
could you please explain what exactly did u do ?
how did u extract it and what u dont with it ? flash it from recovery or what ?
a small step by step guide would be great.
thanks !
chundrik said:
could you please explain what exactly did u do ?
how did u extract it and what u dont with it ? flash it from recovery or what ?
a small step by step guide would be great.
thanks !
Click to expand...
Click to collapse
after flashing the rom. extract the boot.img from the rom zip file. Put it in your fastboot/adb folder.
then do:
fastboot flash boot boot.img
exad said:
after flashing the rom. extract the boot.img from the rom zip file. Put it in your fastboot/adb folder.
then do:
fastboot flash boot boot.img
Click to expand...
Click to collapse
yea but iam failing on flashing the rom in the first place...
chundrik said:
yea but iam failing on flashing the rom in the first place...
Click to expand...
Click to collapse
I know ^_^ That's why you should stick to the thread I am already helping you in and not hijack others that seem like they are the same issue when they're not
I Tool the Rom, Put it on a 2gb SD card, went into recovery, and hit install zip, choosed the rom and installed it. Then i have extracted the boot img and flashed it with fastboot
Sent from my 831C using XDA Free mobile app

Brick the phone! HEEEELP!

Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
mathius89 said:
Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
Click to expand...
Click to collapse
More info please. What ROM you were before and what ROM did you flashed upon that one. What cwm, touch cwm? From now on install TWRP, it's better, safer and more stable.
BeyondTheHorizon said:
More info please. What ROM you were before and what ROM did you flashed upon that one. What cwm, touch cwm? From now on install TWRP, it's better, safer and more stable.
Click to expand...
Click to collapse
Before JB had the factory, and installed the [ROM] Huawei KK_ P6_all in EN (BbN) _based on_repack SLMINSK, restarting the mobile I stay in the Huawei logo.
The recovery is this: http://forum.xda-developers.com/showthread.php?t=2417919.
Next time will install the TWRP but now you do not.
mathius89 said:
Before JB had the factory, and installed the [ROM] Huawei KK_ P6_all in EN (BbN) _based on_repack SLMINSK, restarting the mobile I stay in the Huawei logo.
The recovery is this: http://forum.xda-developers.com/showthread.php?t=2417919.
Next time will install the TWRP but now you do not.
Click to expand...
Click to collapse
It takes more than five minutes for the new ROM to boot. It taked longer ? And also you should follow tutorials in here about flashing ROM's and how/what recovery you should install at the right time during the upgrading process. Especially when you upgrade from JellyBean to KitKat.
BeyondTheHorizon said:
It takes more than five minutes for the new ROM to boot. It taked longer ? And also you should follow tutorials in here about flashing ROM's and how/what recovery you should install at the right time during the upgrading process. Especially when you upgrade from JellyBean to KitKat.
Click to expand...
Click to collapse
I left 30 minutes and never passed the Huawei logo ... No solution?
mathius89 said:
I left 30 minutes and never passed the Huawei logo ... No solution?
Click to expand...
Click to collapse
Well, you must look for a tutorial on how to flash stock recovery and install stock ROM again.
mathius89 said:
Hello, I tell you, after rooting the phone I installed the cwm recovery, after i install a ROM to restart it I was caught in the logo of Huawei, is there any solution?
Thank you.
Click to expand...
Click to collapse
did you wipe dalvik and cache ? if not try to do this in recovery, most bootloops are caused by this
mathius89 said:
I left 30 minutes and never passed the Huawei logo ... No solution?
Click to expand...
Click to collapse
CWM is not permanent recovery, put the UPDATE. APP in dload FOLDER on SD card and boot phone via 3 buttons.
Next time read thread carefully and use TWRP.
Sent from my HUAWEI P6-U06 using Tapatalk
alex.79 said:
CWM is not permanent recovery, put the UPDATE. APP in dload FOLDER on SD card and boot phone via 3 buttons.
Next time read thread carefully and use TWRP.
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
mathius89 said:
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
Click to expand...
Click to collapse
Official firmware from Huawei. Has a many thread here in XDA.
Sent from my HUAWEI P6-U06 using Tapatalk
mathius89 said:
What is the Update.app? Sorry for my ignorance but I have no idea.
thanks
Click to expand...
Click to collapse
You flashed from CWM, that's why you have this problem. Download a ROM that can be flashed by dload method, and that ROM must be a stock ROM. Stock ROM's are not in a flashable zip's format, but they are in a form of an update.app file.
Create a folder in your sdcard and name it dload. In dload folder put the update.app file. After that press volume up + down + power button all at once until you see the HUAWEI logo, after that release those buttons.
For this to work you must have stock recovery.
BeyondTheHorizon said:
You flashed from CWM, that's why you have this problem. Download a ROM that can be flashed by dload method, and that ROM must be a stock ROM. Stock ROM's are not in a flashable zip's format, but they are in a form of an update.app file.
Create a folder in your sdcard and name it dload. In dload folder put the update.app file. After that press volume up + down + power button all at once until you see the HUAWEI logo, after that release those buttons.
For this to work you must have stock recovery.
Click to expand...
Click to collapse
Ok, when I can I will try. Thank you very much!
mathius89 said:
Ok, when I can I will try. Thank you very much!
Click to expand...
Click to collapse
You're welcome. Good luck and enjoy the new firmware.

Help me urgente

For God's sake, not my tablet comes out of this screen. I updated to version CyanogenMod 12.1. Everything was cool, I went for a reset manufactures and not comes out of this screen. Solution or have I lost my device
May we can help you - but I understand nearly nothing in your inquiry. Did you have the TWRP screen by reboot? Did you flash the specific device recovery? For the N5100 / N5110 / N5120 are several recoverys available. A wrong recovery can brick your device....
redukt said:
May we can help you - but I understand nearly nothing in your inquiry. Did you have the TWRP screen by reboot? Did you flash the specific device recovery? For the N5100 / N5110 / N5120 are several recoverys available. A wrong recovery can brick your device....
Click to expand...
Click to collapse
Friend I updated with his rom and I was doing a reset of factory and was only on this screen.
Did you do the factory reset by TWRP or on cm12.1? Which TWRP is on your device? It seems your recovery stands in conflict.
redukt said:
Did you do the factory reset by TWRP or on cm12.1? Which TWRP is on your device? It seems your recovery stands in conflict.
Click to expand...
Click to collapse
I used TWRP-2850-N5100-3G.img and now as I do friend
redukt said:
Did you do the factory reset by TWRP or on cm12.1? Which TWRP is on your device? It seems your recovery stands in conflict.
Click to expand...
Click to collapse
rom the very showed he had a new rom and did just upgrade. as a result did not see, I did a reset and it so. Rom showed it was only 3g tablet that is not phone. help me friend. is that I lost my tablet.
Try to reflash the recovery. Then rom / gapps.
Gesendet von meinem GT-N5100 mit Tapatalk
redukt said:
Try to reflash the recovery. Then rom / gapps.
Gesendet von meinem GT-N5100 mit Tapatalk
Click to expand...
Click to collapse
But friends do not come out of this screen, I can not do anything
edglaston said:
But friends do not come out of this screen, I can not do anything
Click to expand...
Click to collapse
I holding Power + Volume Up + home only is this screen
edglaston said:
I holding Power + Volume Up + home only is this screen
Click to expand...
Click to collapse
I think I figured out the problem, I updated the rom another model, my model is the GT-N5100 and see that this is the GT-N5110 model. I think I damaged my tablet.
Nope, you can wipe / format your system. Take the N5100 recovery and flash it via ADB. Reboot in recovery and flash the right rom / gapps.
redukt said:
Nope, you can wipe / format your system. Take the N5100 recovery and flash it via ADB. Reboot in recovery and flash the right rom / gapps.
Click to expand...
Click to collapse
you could explain to me step by step how I do it. As I said it is locked on that screen.
They´re so many threads here on XDA with flashinstructions / ADB. Pls use the forum search engine
redukt said:
They´re so many threads here on XDA with flashinstructions / ADB. Pls use the forum search engine
Click to expand...
Click to collapse
friend help me, I am newbie. Tell a method or show me a link
edglaston said:
friend help me, I am newbie. Tell a method or show me a link
Click to expand...
Click to collapse
I put the USB cable and the tablet does not appear on the computer
Well you have to install drivers for your device pls google for it.
And then follow those instructions.
You have to reboot your device in bootloader mode bye volume down, homebutton and power.

Categories

Resources